Power and Energy Commons^™

Energy-Based Analysis Of Utility Scale Hybrid Power Systems, Kwame Agyenim-Boateng

UNLV Theses, Dissertations, Professional Papers, and Capstones

The promise of large-scale use of renewables such as wind and solar for supplying electrical power is tempered by the sources' transient behavior and the impact this would have on the operation of the grid. Among the methods cited for addressing some of those concerns are exploring the complementary nature of solar and wind power generation, and through the use of supplemental energy storage. While the technology for the latter has not been proven to be economical on a large scale at the present time, some assessments of what magnitude is required can be made. An energy-based analysis of utility …

Turbine, Vijaya Krushna Varma Mr

VIJAYA KRUSHNA VARMA Mr

Varma designed ultra modern and high efficiency turbines which can use gas, steam or fuels as feed to produce electricity or mechanical work for wide range of usages and applications in industries or at work sites. Varma turbine engines can be used in all types of vehicles. These turbines can also be used in aircraft, ships, battle tanks, dredgers, mining equipment, earth moving machines etc, Salient features of Varma Turbines. 1. Varma turbines are simple in design, easy to manufacture, easy to operate and maintain. 2. Varma turbines are less expensive. 3. Varma turbines have a great power to weight …

Evaluation Of Cathode Materials For Low Temperature (500-700c) Solid Oxide Fuel Cells, Alexander M. Lassman

Master's Theses

Solid oxide fuel cells (SOFC) have gained a great deal of interest, due to their potential for high efficiency power generation and ability to utilize hydrogen fuel, as well as various hydrocarbon-based fuels. A recent trend in SOFC development has been towards lower operating temperatures (500-700°C), which can substantially reduce the cost and complexity of the system. This thesis presents an investigation into state of the art Ba- and La- based cathode materials for use in low temperature (500-700°C) solid oxide fuel cells.

Synthesis of A-site deficient [A=0.97] Ba_0.5Sr_0.5Co_0.8Fe_0.2O₃ (BSCF) was …

Experimental And Numerical Investigations Of Tubular-Shaped Direct Methanol Fuel Cells (Dmfcs), Travis R. Ward

Master's Theses

This study focuses on both the numerical and experimental investigations of the novel, passively operated, tubular-shaped, Direct Methanol Fuel Cell (DMFC) as an alternative geometry to the traditional planar-shaped fuel cell. The benefit of the tubular geometry compared to the planar geometry is the higher instantaneous volumetric power density provided by the larger active area, which could be beneficial in applications that require a high instantaneous power while occupying a small volume. First, a two-dimensional, two-phase, non-isothermal model was developed to investigate the steady-state performance and design characteristics of a tubular-shaped, passive DMFC. It was found that a higher ambient …

Vuv Absorption Cross Section Of Benzene, Relevance For Titan’S Atmosphere, F-J. Capalbo, Y. Bénilan, N. Fray, M. Schwell, Et. Es-Sebbar, N. Champion, T. Koskinen, R. Yelle

Dr. Et-touhami Es-sebbar

Saturn's largest satellite, Titan, is the only one in the Solar System known to have a thick N2/CH4, planet like atmosphere. The dissociation of these principal components and the recombination of the products make this atmosphere to be rich in organic compounds of high interest for astrobiology. Solar and stellar occultations observed by the Ultraviolet Imaging Spectrograph (UVIS) on board the Cassini spacecraft can be used to characterize the composition of Titan’s upper atmosphere (400 – 1400 km). The results depend strongly on the knowledge of the molecular absorption cross sections of the atmospheric constituents (Ferradaz et al. 2009). This …

Transferts De Chaleur Dans Un Réacteur Thermochimique Solaire Muni D’Un Récepteur Volumique Poreux, Hernando Romero Paredes Rubio

Hernando Romero Paredes Rubio

Un réacteur thermochimique solaire de 1 kW muni d’une structure céramique poreuse en céramique est modélisé pour simuler les transferts thermiques a l’intérieur du récepteur volumétrique. Le modèle développé a été utilisé pour prévoir le comportement thermique du réacteur en fonction des différentes conditions opératoires qui concernent le débit de gaz inerte, le flux solaire incident, la porosité, la longueur du récepteur, et la prise en compte de réactions chimiques. Les résultats montrent que la température maximale est de 1850K pour une concentration solaire de 1000 soleils. La température diminue de manière significative lorsque le débit de gaz augmente. Un …

Thermal Feasibility And Performance Characteristics Of An Air-Cooled Axial Flow Cylindrical Power Inverter By Finite Element Analysis, Jonathan Atef Tawfik

Masters Theses

The purpose of the present study is to determine the thermal feasibility of an air-cooled power inverter. The inverter circuitry layout is designed in tandem with the thermal management of the devices. The cylindrical configuration of the air-cooled inverter concept accommodates a collinear axial air blower and a cylindrical capacitor with inverter cards oriented radially between them. Cooling air flows from the axial fan around the inverter cards and through the center hole of the cylindrical capacitor. The present study is a continuation of the thermal feasibility study conducted in fiscal year 2009 for the Oak Ridge National Laboratory to …

Characterization Of Continuous Vacuum Ultraviolet Lamps-Implication On The Study Of Methane Photolysis At Lyman Alpha (121.6 Nm), M-C. Gazeau, Y. Benilan, Et. Es-Sebbar, A. Jolly, E. Arzoumanian, N. Fray, H. Cottin

Dr. Et-touhami Es-sebbar

Low-temperature hydrogen plasmas are widely used as continuous vacuum ultraviolet irradiation sources in photochemical studies and, in particular, in laboratory simulations of planetary atmospheres. One of the most challenging objectives of such experiments is to retrieve accurate quantitative laboratory data allowing a reliable comparison with theoretical and/or observational ones. This task can only be achieved when the irradiation source delivers a well characterised radiation in terms of flux and wavelength dependency. As an example, we will present a study, developed in the frame of a program dedicated to simulations of Titan’s atmosphere, on methane photolysis at Lyman alpha (121.6 nm). …

Formation Of Hcn And Nh3 As Primary Compounds Of Titan’S Atmosphere Simulations Using N2-Ch4 Afterglow Plasma’’, M-C. Gazeau, Y. Bénilan, E. Arzoumanian, Et. Es-Sebbar, A. Jolly, C.D. Pintassilgo

Dr. Et-touhami Es-sebbar

No abstract provided.

Load Hindcasting: A Retrospective Regional Load Prediction Method Using Reanalysis Weather Data, Jonathan D. Black

Masters Theses 1911 - February 2014

The capacity value (CV) of a power generation unit indicates the extent to which it contributes to the generation system adequacy of a region’s bulk power system. Given the capricious nature of the wind resource, determining wind generation’s CV is nontrivial, but can be understood simply as how well its power output temporally correlates with a region’s electricity load during times of system need. Both wind generation and load are governed by weather phenomena that exhibit variability across all timescales, including low frequency weather cycles that span decades. Thus, a data-driven determination of wind’s CV should involve the use of …

Streaming Potential Generated By A Pressure-Driven Flow Over Superhydrophobic Stripes, Hui Zhao

Mechanical Engineering Faculty Research

The streaming potential generated by a pressure-driven flow over a weakly charged slip-stick surface [the zeta potential of the surface is smaller than the thermal potential (25 mV)] with an arbitrary double layer thickness is theoretically studied by solving the Debye–Huckel equation and Stokes equation. A series solution of the streaming potential is derived. Approximate expressions for the streaming potential in the limits of thin double layers and thick double layers are also given in excellent agreement with the full solution. To understand the impact of the slip, the streaming potential is compared against that over a homogeneously charged smooth …

Using Thermally Coupled Reactive Distillation Columns In Biodiesel Production, Nghi Nguyen, Yaşar Demirel

Yaşar Demirel Publications

Production of ethyl dodecanoate (biodiesel) using lauric acid and methanol with a solid acid catalyst of sulfated zirconia is studied by using two distillation sequences. In the first sequence, the methanol recovery column follows the reactive distillation column. In the second sequence, the reactive distillation and methanol recovery columns are thermally coupled. Thermally coupled distillation sequences may consume less energy by allowing interconnecting vapor and liquid streams between the two columns to elminate reboiler or condenser or both. Here we study the thermally coupled side-stripper reactive distillation and eliminate the condenser of the reactive distillation column. Both the sequences are …