Power and Energy Commons^™

Pso Based Optimal Placement And Setting Of Facts Devicesfor Improving The Performance Of Power Distribution System, Tibin Joseph

Tibin Joseph

No abstract provided.

Integration Of Upqc For Power Quality Improvement In Distributed Generation Network – A Review, Shafiuzzaman Khan Khadem, Malabika Basu, Michael Conlon

Conference Papers

In this paper a technical review of the integration of a Unified Power Quality Conditioner (UPQC) in a distributed generation network is presented. Although the primary task of UPQC is to minimize grid voltage and load current disturbances along with reactive and harmonic power compensation, additional functionalities such as compensation of voltage interruption and active power transfer to the load and grid have also been identified. Connection methodologies with their advantages and disadvantages are also described. Recent improvements in capacity expansion techniques and future trends for the application of UPQC in distributed modes are also identified.

Highly Efficient Maximum Power Point Tracking Using A Quasi-Double-Boost Dc/Dc Converter For Photovoltaic Systems, Christopher J. Lohmeier

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Solar photovoltaic (PV) panels are a great source of renewable energy generation. The biggest problem with solar systems is relatively low efficiency and high cost. This work hopes to alleviate this problem by using novel power electronic converter and control designs. An electronic DC/DC converter, called “Quasi-Double-Boost DC/DC Converter,” is designed for a Solar PV system. A Maximum Power Point Tracking (MTTP) algorithm is implemented through this converter. This algorithm allows the PV system to work at its highest efficiency. Different current sensing and sensorless technologies used with the converter for the MPPT algorithm are offered and tested. Design aspects …

Design And Control Of High Power Density Motor Drive, Dong Jiang

Doctoral Dissertations

This dissertation aims at developing techniques to achieve high power density in motor drives under the performance requirements for transportation system. Four main factors influencing the power density are the main objects of the dissertation: devices, passive components, pulse width modulation (PWM) methods and motor control methods.

Firstly, the application of SiC devices could improve the power density of the motor drive. This dissertation developed a method of characterizing the SiC device performance in phase-leg with loss estimation, and claimed that with SiC Schottky Barrier Diode the advantage of SiC JFET could benefit the motor drive especially at high temperature. …

Nonlinear Multivariable Modeling Of Solid Oxide Fuel Cells Using Core Vector Regression, M. Mohammadi, M. Raoofat, Hesamoddin Marzooghi, G. B. Gharehpetiangharehpetian

Hesamoddin Marzooghi

This paper presents new steady-state and dynamic models for solid oxide fuel cells (SOFCs) using core vector regression (CVR). So far, most of conventional SOFC models have been presented based on conversion laws. Due to complex mathematical equations used in these models, they are time-consuming and need large amount of memory to be applied for controller design, especially power electronic interface controller design, generation and load predictions, optimization and other studies. To overcome these problems, some black-box models, such as support vector machine (SVM) and artificial neural network (ANN)-based models have been also proposed for SOFC. In this paper, in …

Bridgeless Active Power Factor Correction Using A Current Fed Push Pull Converter, Jeramie Seth Bianchi

Master's Theses

ABSTRACT

Bridgeless Active Power Factor Correction

Using a Current Fed Push Pull Converter

Jeramie Seth Bianchi

Switched Mode Power Supplies have become increasingly popular for efficient methods of delivering power to an assortment of electronic devices. This thesis proposes a method of using a current fed push pull converter to provide active power factor correction and rectification in a single stage. While most AC-DC converters utilize a bridge rectifier to convert AC-DC and then perform DC-DC conversion, the proposed circuit will utilize its output diodes to perform rectification, thus eliminating the need for a bridge rectifier. This circuit will also …

Modeling And Analysis Of The Effects Of Pcb Parasitics On Integrated Dc-Dc Converters, Darwin Domingo Fernandez

Master's Theses

Load transients are prevalent in every electronic device including semiconductor memory, card readers, microprocessors, disc drives, piezoelectric devices, and digitally based systems. They are capable of producing voltage stress, introducing noise, and degrading device functionality. In order to avoid damage to the device, a feedback control loop is implemented with system compensation to regulate the output voltage deviations by the converter. Because designing compensation networks can be rather complicated, DC-DC converters with integrated feedback control topologies help minimize design time and complexity of converter compensation at the expense of design flexibility. This thesis widens the limitations of an integrated DC-DC …

Experimental Study Of Shoot-Through Control Methods For Z-Source Inverter, Omar Ellabban, Joeri Van Mierlo, Philippe Lataire

Omar Ellabban

This paper presents a simulation and experimental comparative analysis of the Z-source inverter (ZSI) with four different shoot-through (ST) control methods, namely: the simple boost control, the maximum boost control, the maximum constant boost control and the modified space vector modulation boost control methods. A review of these methods is presented with a summary of all expressions. A prototype of a 30 kW ZSI is designed and implemented. The eZdsp™ F2808 evaluation board is used for the realization of the shoot-through control methods and the real time workshop (RTW) is used for automatic code generation. The paper compares between the …

Control Of A Bidirectional Z-Source Inverter Forelectric Vehicle Applications In Different Operation Modes, Omar Ellabban, Joeri Van Mierlo, Philippe Lataire

Omar Ellabban

This paper proposes two control strategies for the bidirectional Z-source inverters (BZSI) supplied by batteries for electric vehicle applications. The first control strategy utilizes the indirect field-oriented control (IFOC) method to control the induction motor speed. The proposed speed control strategy is able to control the motor speed from zero to the rated speed with the rated load torque in both motoring and regenerative braking modes. The IFOC is based on PWM voltage modulation with voltage decoupling compensation to insert the shoot-through state into the switching signals using the simple boost shoot-through control method. The parameters of the four PI …

Off-Grid Photovoltaic System Design Project, Brian Duffy

Electrical Engineering

This project uses the BP SX 150S solar panel to charge a 12 V battery. This battery powers an AIMS 400 W Modified Sine Wave Inverter to provide 120 V RMS AC power to a load of up to 40 W. Inverter efficiency was measured at different load conditions. A control circuit was implemented to prevent overcharging or over-discharging of the battery, by disconnecting it from the panel or the load, respectively. The control circuit turn-on and cutoff voltages were measured versus battery voltage, and the on-resistance of the MOSFET switches was measured for various load currents. A table of …

A Dsp Based Dual Loop Digital Controller Design And Implementation Of A High Power Boost Converter For Hybrid Electric Vehicles Applications, Omar Ellabban, Joeri Van Mierlo, Philippe Lataire

Omar Ellabban

This paper presents a DSP based direct digital control design and implementation for a high power boost converter. A single loop and dual loop voltage control are digitally implemented and compared. The real time workshop (RTW) is used for automatic real-time code generation. Experimental results of a 20 kW boost converter based on the TMS320F2808 DSP during reference voltage changes, input voltage changes, and load disturbances are presented. The results show that the dual loop control achieves better steady state and transient performance than the single loop control. In addition, the experimental results validate the effectiveness of using the RTW …

Design And Implementation Of A Dsp Based Dual-Loop Capacitor Voltage Control Of The Z-Source Inverter, Omar Ellabban, Joeri Van Mierlo, Philippe Lataire

Omar Ellabban

The Z-source inverter is a recently proposed single stage converter topology with buck-boost capabilities. This paper proposes a dual-loop capacitor voltage control, with outer voltage loop and inner current loop, of the Z-source inverter (ZSI). Both controller are designed based on a third order small signal model of the ZSI using the direct digital design method. Real-time control algorithm is implemented using DSP linked with MATLAB real time workshop (RTW) as rapid prototyping tool. The feasibility of the proposed dual loop control method has been verified by the simulation and experimental results.

Parallel Operation Of Inverters And Active Power Filters In Distributed Generation System: A Review, Shafiuzzaman Khan Khadem, Malabika Basu, Michael Conlon

Articles

In this paper a technical review of parallel operation of power electronics inverters for load sharing conditions in distributed generation (DG) network is presented. Emphasis is given to parallel operation of Active Power Filters (APFs) as they are widely used to mitigate load current disturbances into DG networks. Discussions on recent advances in control strategies as applied to APFs are presented.