Power and Energy Commons^™

Ai-Driven Security Constrained Unit Commitment Using Predictive Modeling And Eigen Decomposition, Talha Iqbal

Graduate Theses, Dissertations, and Problem Reports

Security Constrained Unit Commitment (SC-UC) is a complex large scale mix integer constrained optimization problem solved by Independent System Operators (ISOs) in the daily planning of the electricity markets. After receiving offers and bids, ISOs have only few hours to clear the day-ahead electricity market. It requires a lot of computational effort and a reasonable time to solve a large-scale SC-UC problem. However, exploiting the fact that a UC problem is solved several times a day with only minor changes in the system data, the computational effort can be reduced by learning from the historical data and identifying the patterns …

System Analysis Of An Internal Combustion Engine (Ice) – Solid Oxide Fuel Cell (Sofc) Hybrid Cycle, Jose Javier Colon Rodriguez

Graduate Theses, Dissertations, and Problem Reports

Due to the intermittent nature of renewable energy and the rigid operation of existing coal plants, the need for flexible power generation technology is eminent. Hybrid energy systems have shown potential for flexible, grid following dynamics while maintaining higher efficiencies. The work below focuses on the performance analysis of a proposed 100 kW pressurized Internal Combustion Engine (ICE) and Solid Oxide Fuel Cell (SOFC) hybrid system. The un-utilized fuel from the SOFC stack provided the chemical energy to operate the engine. A turbocharger was used to deliver the necessary air flow for both the stack and engine. An external reformer …

Dynamic Modeling, Data Reconciliation, Parameter Estimation, And Health Monitoring Of A Supercritical Power Plant, Katherine Grace Hedrick

Graduate Theses, Dissertations, and Problem Reports

With the introduction of a larger portion of renewable sources of power coming onto the U.S. power grid in recent decades, the operational strategy of coal-fired power plants has changed significantly to focus more on flexibility in response to the changing energy market. This has naturally led to different operational challenges. Many of these challenges are focused on the boilers within these plants, as they are producing more emissions and experiencing increased damage during load-following, which in turn leads to increased costs from penalties for not achieving emission standards or maintenance costs as boilers accumulate damage from the cycling behavior. …

Modeling, Simulation, And Hardware-In-The-Loop Implementation Of Distributed Voltage Control In Power Systems With Renewable Energy Sources, Ali Dehghan Banadaki

Graduate Theses, Dissertations, and Problem Reports

This dissertation develops and analyzes distributed controllers for power systems with renewable energy sources. A comprehensive state space modeling of voltage source inverters (VSIs) is developed specifically to address the secondary voltage control. This model can be used for simulation and control design. Unlike frequency, voltage is a local phenomenon, meaning that it cannot be controlled from a far distance. Therefore, a voltage zoning matrix that relates the sensitivity of the loads to the sources is proposed. The secondary voltage control is designed by applying the eigenvalue decomposition of the voltage zoning matrix to obtain the reference generators voltages. The …

Modeling Of Inverter-Based Microgrid For Small-Signal And Large-Signal Stability Analysis, Vishal Verma

Graduate Theses, Dissertations, and Problem Reports

Integration of inverter-based resources (IBRs) such as solar photovoltaic, wind, and battery storage, is both a boon and a bane for electric power systems. On one hand, IBRs have helped in making electrical energy a clean (carbon-free) source of energy. On other hand, the dynamics of IBRs have changed the way power system studies have been carried out. With the advantages IBRs offer over conventional resources, it is assumed that a small distribution power system (microgrid) will have a 100% IBRs penetration in the future. Such a microgrid can operate in grid-connected mode or in an islanded mode. Both modes …

An Efficient Ar Model-Based Method For The Detection Of Forced Oscillations In Power Networks: Implementation And Analysis, Maria Waleska Suarez

Graduate Theses, Dissertations, and Problem Reports

An active research topic is the detection of various oscillations that may lead to instability and potential disruption in the operation of a power network. Forced Oscillations (FOs) play a unique role in power system stability among various oscillations. They are perturbances that change the system’s state and are caused for many reasons, including but not limited to persistent load changes and oscillatory load or generation, fault, triplane, and other mechanical anomalies. These factors can hugely affect the power grid by either increasing or decreasing the amplitude, causing corrupt modes leading to blackouts, affecting the equipment involved, delivering poor power …

Application Of Artificial Intelligence In Three Phase Unbalanced Smart Power Distribution Grid, Deepak Tiwari

Graduate Theses, Dissertations, and Problem Reports

Electrification of the transportation sector can play an essential role in curbing fossil fuel scarcity and oil shortages in the world. Electric vehicles (EVs) can significantly reduce CO2 emissions, improve urban pollution. Apart from these advantages of EVs, they may also pose challenges to the distribution grid. Increasing penetration of EVs puts an extra burden and leads to affect the grid severely. Load congestions, voltage drops/regulation, overloading are some of the issues that might incur in the grid because of improper charging of EVs. The uncertain nature of EV owners makes it very difficult to predict the charging pattern. So …

Consensus Based Control Strategy For Virtual Synchronous Generators In Microgrids, Anusha Kandula

Graduate Theses, Dissertations, and Problem Reports

Renewable energy sources such as photo-voltaic and wind energy are integrating very rapidly in power systems. These energy-based systems typically adopt power-electronic interfaced inverters to connect to the grid. However, unlike traditional generators, these sources have low inertia, resulting in system stability issues, especially in microgrids where they are the primary sources. To mitigate the low-inertia effect, the inverters are modeled as virtual synchronous generators (VSG), and their control is designed. The VSG emulates the inertia effect of the synchronous generator and maintains the stability of the system. Even though the droop control provides the primary control, it is insufficient …

Design, Modeling And Optimization Of Reciprocating Tubular Permanent Magnet Linear Generators For Free Piston Engine Applications, Jayaram Subramanian

Graduate Theses, Dissertations, and Problem Reports

Permanent Magnet Linear Generators (PMLG) are electric generators which convert the linear motion into electricity. One of the applications of the PMLG system is with free piston engines. Here, the piston is moved by the expander using an internal combustion engine or a Stirling engine. Other applications of the PMLG are wave energy conversion, micro energy harvesters, and supercritical CO₂ expander systems. The most common technology of the electric generators is a rotary electric generator. The current technology of the engine-generators (GENSET) is of a rotary type which uses a crankshaft to convert the linear motion to rotary motion …

An Examination To Pathways Powering Car Using Clean Energy, Marina Miranda

Graduate Theses, Dissertations, and Problem Reports

Traditional vehicles powered by internal combustion engines contribute significantly to increasing emissions of greenhouses gasses (GHG). There has been increasing interest in powering vehicles using green energy include using electricity produced by wind turbine and solar panel. The green electricity can be used to directly charge the Battery Electric Vehicles (BEV), or producing hydrogen as fuel for Fuel Cell Electric Vehicles (FCEV) by converting electrical energy to hydrogen (H₂) through water electrolysis. The low energy density H₂ produced can be stored on board as either compressed H₂ or liquefied H₂.

This research examines the …

Assessment Of Unmanned Aerial Systems And Lidar For The Utility Vegetation Management Of Electrical Distribution Rights-Of-Ways, Matthew R. Walker

Graduate Theses, Dissertations, and Problem Reports

Utility Vegetation Management (UVM) is often the largest maintenance expense for many utilities. However, with advances in Unmanned Aerial Systems (UAS; or more commonly, “drones”) and lidar technologies, vegetation managers may be able to more rapidly and accurately identify vegetation threats to critical infrastructures. The goal of this study was to assess the utility of Geodetics’ UAS-lidar system for vegetation threat assessment for 1.6 km of a distribution electric circuit. We investigated factors which contribute to accurate tree crown detection and segmentation of trees from within an UAS-lidar derived point cloud, and the factors which contribute to accurate tree risk …

Resilient Stochastic Control Strategies In Cyber-Physical Microgrids, Mohammad Reza Khalghani

Graduate Theses, Dissertations, and Problem Reports

Microgrids are the integration of a large number of distributed energy resources in a decentralized way such that the energy supply reliability and resiliency are enhanced against natural disasters, physical and cyber disruptions. This dissertation addresses three main challenges for microgrid operation and management:

1) According to fast growing number of Electric Vehicles (EV) deployment, their impacts on microgrids resulted from their uncertain behaviors are new concerns for the microgrid operators. These concerns can be EV charging and discharging schedule and locations of EV parking-lots in the system which are considered and solved using stochastic modeling and optimization algorithms based …

Design And Implementation Of Overcurrent Protection Relays Test Bench, Khalid Daud Khattak

Graduate Theses, Dissertations, and Problem Reports

The electrical power simulator in Engineering Sciences Building (ESB) at WVU was dismantled in July 2018. The simulator was used as a teaching tool for EE students to conduct lab experiments. The power simulator employed electromechanical and microprocessor protection relays, manual isolation and industrial circuit breakers, switches, variable autotransformer (VARIAC), voltmeters and ammeters. During the dismantling, a lot of equipment was retrieved for future possible use. This led to the idea of designing and implementing a simple circuit on a test bench that can be used as a lab equipment to demonstrate the operation of overcurrent protection relays. It was …

Data Driven Intelligent Grid Stability Monitoring And Adaptive Emergency Response, Hasan Ul Banna

Graduate Theses, Dissertations, and Problem Reports

Power grids are large cyber-physical systems with physical operation controlled and integrated through communications. The technological breakthroughs made by the availability of low-cost, high speed communications, larger storage spaces, greater internet bandwidths have led to increased attentions towards advantages of these systems. The use of Phasor Measurement Unit (PMU) in complex interconnected power system for monitoring and control has increased significantly. This has resulted in huge amounts of data and growing databases, thus gearing towards an era where utilities might encounter an enormous amount of data daily from their measurement units including sensitive information useful for daily operations. With increasing …

Energy Efficiency Evaluation Of Blower Heater Non-Purge Compressed Air Dryers, Alexandra M. Botts

Graduate Theses, Dissertations, and Problem Reports

There are several compressed air dryers available for industrial use including, refrigerant, desiccant, and membrane. This research focuses on twin tower regenerative closed loop desiccant dryers, specifically: blower heater non-purge (BHNP) with and without cooling water pumps, Compressed-air Heater Purge (CHP), Blower Heater Purge (BHP), and Pressure Swing Heaterless (PSH). These styles of dryers are used mainly in industries that require extremely dry air such as, food manufacturing, medical air, or sensitive technology manufacturers. The research was conducted by collecting and analyzing real time current draw data on air compressors and associated dryers at eight different facilities (13 compressor systems) …