Power and Energy Commons^™

Dc/Dc Converter For A Solar Module, Francine Therese A. Canal, Jesus Cruz, Juan Jose Gonzalez

Electrical Engineering

This project presents the design and implementation of a DC/DC power converter intended for photovoltaic (PV) modules with varying electrical output characteristics. Solar panels experience significant changes in output voltage and power due to variations in sunlight, temperature, and load conditions. To ensure reliable operation across a range of conditions, the proposed converter is capable of both step-up and step-down operation to accommodate solar modules with power ratings from 50 W to 450 W and open-circuit voltages between 10 V and 80 V. The system operates at load currents up to 10 A and provide a user-adjustable output voltage within …

Dc/Dc Converter For A Solar Module, Stella Uribe, Richie Zaragoza, Olivia Grace Tran, Phillip Tyler Rich

Electrical Engineering

This project focuses on the design and validation of a general-purpose DC/DC power converter intended for use with photovoltaic (PV) solar modules operating under variable environmental and loading conditions. Solar panels exhibit significant variation in output voltage, current, and available power due to changes in irradiance, temperature, and operating point, making direct connection to downstream loads impractical. The proposed system addresses this challenge by providing a single, user-adjustable regulated DC output capable of both stepping up and stepping down the solar module voltage. The converter is designed to interface with solar modules rated between 50 W and 400 W, with …

Stationary Bike Power/Efficiency Monitor, Paula J. Diaz, Pilar M. Cook, Danielle Rhind

Electrical Engineering

This project developed a real-time power and efficiency monitoring system for a SportsArt ECO-POWR stationary exercise bicycle. The goal was to measure rider mechanical power and electrical power delivered to the utility grid simultaneously, allowing the overall bike-to-grid efficiency to be calculated and displayed in real time. Rider power was measured using Garmin Rally ANT+ power pedals, while grid power was measured using a Yokogawa WT310E power analyzer. A Raspberry Pi 3 Model B+ synchronized both data sources, calculated efficiency, displayed live performance metrics through a graphical user interface, and logged measurement data to CSV files for later analysis. The …

Autonomous Rover Solar And Battery Management System: Team B, Karla Jazmin Lira Gonzalez, Paige Ambriz, Kunj Shah, Elhom Delasa Sheykhi

Electrical Engineering

This project focused on the software and printed circuit board (PCB) integration for Poly1Rover’s battery management system (BMS). Poly1Rover is a student organization dedicated to building a low-cost autonomous rover designed to operate on Mars. Since solar availability, temperature, and other conditions on Mars vary, the rover requires a reliable battery management system that accurately monitors battery health and status. This team’s work included the communication and control side of the BMS. The subsystem was designed around the Renesas ISL94202 battery monitor and the MSP430 controller. Battery information was read from the ISL94202 registers through I2C communication, converted from raw …

Maximum Power Point Tracking For Photovoltaic Cells, Rodrigo Menchaca-Ramirez, Jesus Martinez, Steven Rodriguez

Electrical Engineering

Unlike an ideal DC Power Supply, a solar panel does not operate with linear I-V Characteristics. The voltage and current characteristics of a solar panel change based on irradiance, temperature, weather conditions, and load demand. Because of these factors, solar panels do not always operate at their Maximum Power Point, which can lead to significant power losses. Maximum Power Point Tracking is used to adjust the panel operating point so that more usable power can be delivered to the load.This project developed a Maximum Power Point Tracking system using an STM32 Nucleo-L4A6ZG microcontroller and an LT8705A DC-DC converter stage. The …

Portable Food Pasteurization Using Pulsed Electric Fields (Pef), Thomas E. Mcmillan Iii

Electrical Engineering

Foodborne illnesses remain a significant public health concern, motivating continued development of alternative food pasteurization technologies. Pulsed electric field (PEF) treatment is a non-thermal pasteurization method that inactivates microorganisms through electroporation while minimizing thermal degradation of food products. The long-term objective of this project was development of a portable PEF food pasteurization system.

An iterative design approach was used to investigate generation of the high-voltage pulses required for PEF treatment. Multiple pulse forming network topologies were evaluated through simulation, leading to selection of a solid-state Marx generator architecture. A low-voltage five-stage prototype was designed, constructed, and tested to validate the …

Pv Performance Evaluation Study At Cal Poly Solar Farm, Eva Paola D. Calderon

Electrical Engineering

This photovoltaic (PV) system performance evaluation study aims to assess the performance of Cal Poly’s Gold Tree Solar Farm, which produces 4.5MW of solar energy. The evaluation concerns itself with the reliability of the PV system that can be affected by weather conditions, component malfunctions, and degradation of the PV modules. Under the International Energy Agency Photovoltaic Power Systems (IEA-PVPS) Task 13 objectives of reliability and maintenance, this study is necessary to contribute towards improvements in analysis and mitigation strategies for long term usage. Existing operational monitoring data from 2018 to 2025 is the focus timespan, providing real world data …

Sustainabake, Kevin Kunta Swanson Ii

Electrical Engineering

This senior project outlines the development of an oven that utilizes renewable energy to operate safely and effectively. It aims to test building an oven using mostly basic hardware students acquired during their time at Cal Poly and provide a starting point for those interested in creating a solar-powered oven. As our society continues to innovate and increasingly relies on electricity, it is important to place more emphasis on how we can make our lives sustainable to take care of our environment without introducing excessive pollutants. Food preparation is a daily activity that typically involves significant energy consumption, making this …

Isolated Dc-Dc Converter For An Ev Microgrid, Oscar Yu, William Leiker

Electrical Engineering

This product is a redesign of a DC-DC buck-boost converter which utilizes a new topology, the flyback converter, for use in an electric vehicle (EV) as a microgrid. The main driver behind the redesign is to provide electrical isolation between elements in the microgrid. The EV microgrid consists of the battery, motor, external DC and AC ports, and the power electronics (DC-DC converter and AC-DC inverter) which were designed and built in previous senior projects. Using EV’s as microgrids can help relieve stress from the main power grid caused by charging electric vehicles. Implementing EV’s as a microgrid enables the …

Exopg Maturation And Owl Interface, Duncan Michael Louden

Electrical Engineering

The maturation of the ExOPG buoy generator consists of an interface to facilitate remote data acquisition of an existing battery charge controller. This module telemeters battery controller data including voltage, temperature, and state of battery charge. The data is transmitted to a communication system and is able to be viewed by humans on a 24/7 basis for continuous operation and human usage. The module works seamlessly as an addition to the existing ExOPG generator, and it does not interfere with any existing and planned components of the generator. The module is highly efficient and draws minimal power from the existing …

Expeditionary Ocean Power Generator, Ethan Gossard, Julian Steele, Alex Gray, Hunter Herring-Alderete

Electrical Engineering

Point Absorber Wave Energy Converters are currently being explored as a new form of energy harvesting. The Naval Facilities' Expeditionary Ocean Warfare Center (NAVFAC EXWC) has commissioned an interdisciplinary project for students at California Polytechnic State University, San Luis Obispo, to design a prototype Expeditionary Ocean Power Generator (ExOPG) for charging batteries in the ocean.

The Mechanical Engineering team is responsible for assembling the prototype chassis, which converts the vertical bobbing motion of a buoy into kinetic rotational energy that can be used to rotate a generator shaft. They are additionally tasked with isolating the electrical components from the harsh …

Piezoelectric Actuator Driver System, Daniel Hoefer

Electrical Engineering

This work presents the design, fabrication, and testing of a high-voltage piezoelectric actuator driver system purposed for integration into defense and aerospace precision motion control applications, particularly those in laser optics. The core challenge addressed was the mismatch between the standardized 28V DC power bus used in military systems and the significantly higher voltage requirements of piezoelectric actuators. Existing commercial drivers were evaluated and found unsuitable for field deployment due to inadequate ruggedness, excessive complexity, or power limitations. Consequently, a modular system architecture was designed featuring four independent driver channels, each using a high-voltage, high-current linear amplifier topology to scale …

Marine Energy Collegiate Competition - Polywave Energy, Beneda Loya, Isaiah Martinez, Emily Nicoletta, Michael Weber

Electrical Engineering

This document is the final Electrical Engineering senior project report for Cal Poly’s 2025 Marine Energy Collegiate Competition (MECC) team. The goal of this project is to build and test a wave-energy converter designed to address the need for sustainable power generation for remote coastal community microgrids. These existing systems often rely on costly, fossil-fuel generators, creating both logistical and environmental challenges. Our device aims to provide a renewable, low-maintenance solution that can operate reliably in offshore environments and serve commercial or research applications. The goal of the electrical engineering team was to develop a system that can convert rotational …

Advanced Light Dimming Power Converter, Jaden Nguyen, Edwin Lin, Alan Thai

Electrical Engineering

This senior project discusses and follows the development of the Advanced Light Dimming Power Converter meant to modernize the power electronics curriculum and improve student safety for a lab. The power converter attempts to replace the original experiment which includes a traditional TRIAC-based dimmer and focuses on demonstrating phase angle control for incandescent light bulbs. However, several drawbacks including high-voltage exposure and outdated technology warranted a revamp. The redesigned module includes a dual-experiment setup with an updated TRIAC-based dimmer circuit and a new AC-DC LED driver circuit with constant current control and PWM dimming capability. Both systems have been fabricated …

Improvements To Cal Poly's Hybrid Ac/Dc House, Brandon Ng, Andrew Nguyen, Logan Tom

Electrical Engineering

This senior project details the improvements made to Cal Poly’s Hybrid AC/DC House project. The previous state of the house experienced issues with proper reading of the current power being drawn from the connected AC sources, as well as with the system’s multiple-input single-output converter, where thermal overheating of specific FETs prevented the system from reaching its maximum output power. The updates made to the AC/DC house include improved code to prevent faulty readings and display failure and a cleaned-up power monitoring board that removes noisy signals and allows for the correct power implementation to be displayed. In addition, the …

Compact Modular Photovoltaic System With Mppt Controller, Alain Ardash Kanadjian, Alex Aarnio, Christopher Arango

Electrical Engineering

Energy demands have been on the rise, as environmentally harmful power generation systems stay popular due to lower costs and compact designs compared to renewable energy infrastructure. We challenge this problem with a modular photovoltaic microgrid system for power generation in underutilized spaces. The Maximum Power Point Tracking (MPPT) charge controller employed is low-cost and power efficient. This controller monitors energy generation and usage in real time, with data logging through an online user-friendly interface. With support for a variety of solar panel and battery configurations, this scalable system helps provide a cost and space efficient solution to clean energy …

Development Of A Modular Dual-Phase And Single-Phase Buck Converter Laboratory Module, Maxwell John Kreizinger, Ethan David Robson

Electrical Engineering

This senior project entails the design, creation, and testing of a circuit board to exhibit the differences and advantages of the multiphase buck converter over the single-phase buck converter for use in a future power electronic laboratory experiment at Cal Poly State University. As energy demand requirements continually increase from more advanced and widespread use of technology, it is important to find a method of power delivery that maximizes efficiency while taking up as little area on a circuit board as possible. This is where the multiphase buck converter topology is desirable over the traditional single-phase buck converter topology. For …

Dc To Ac Voltage Source Converter Control System, Mohummad Tark Elgassier, Jordan M. Reichhardt, Brayden Richard Young

Electrical Engineering

The Voltage Source Converter Control System integrates a control system for a 2-phase half-bridge voltage source converter (VSC) utilizing a TMS320F2837xD Dual-Core Real-Time Microcontroller. VSCs are critical for the integration of power production into the power grid. They allow for accurate control over DC-AC energy conversion. Additionally with the improvement of renewable energies VSCs play a critical role in controlling the flow of these environmentally controlled and more unpredictable sources of energy. The control system regulates the output current and voltage, regulates switching patterns, and maintains power stability under varying loads. Within the control system Digital control systems, PWM generation, …

Design, Control, And Evaluation Of A Photovoltaic Snow Removal Strategy Based On A Bidirectional Dc-Dc Converter For Photovoltaic–Electric Vehicle Application, Salma Elakkad, Mohamed Hesham, Hany Ayad Bastawrous, Peter Makeen

Electrical Engineering

A novel self-heating technique is proposed to clear snow from photovoltaic panels as a solution to the issue of winter snow accumulation in photovoltaic (PV) power plants. This approach aims to address the shortcomings of existing methods. It reduces PV cell wear, resource loss, and safety risks, without the need for additional devices. A self-heating current is applied to the solar panel to melt the snow covering its surface, which is then allowed to slide off the panel due to gravity. The proposed system consists of a bidirectional DC-DC converter, which removes the snow cover by heating the solar PV …

Artificial Intelligence Computational Techniques Of Flywheel Energy Storage Systems Integrated With Green Energy: A Comprehensive Review, Abdelmonem Draz, Hossam Ashraf, Peter Makeen

Electrical Engineering

In recent years, the operation of the electric power grid has become more efficient and resilient due to the integration of renewable energy sources (RESs). Solar and wind energy are being incorporated aggressively into the main grid, while other RESs like biomass and geothermal energy are also on the rise. However, the intermittent nature of these RESs necessitates the use of energy storage devices (ESDs) as a backup for electricity generation such as batteries, supercapacitors, and flywheel energy storage systems (FESS). This paper provides a thorough review of the standardization, market applications, and grid integration of FESS. It examines the …

Power Controller For Insulated Solar Electric Cooker, Ryan Koshy, Justin Tae-Hoon Kim

Electrical Engineering

Insulated Solar Electric Cookers, or ISECookers, are devices created to aid those in impoverished regions improve safety, sustainability, and quality of life regarding their cooking practices. ISECookers present an alternative to traditional biofuel/biomass energy sources and provide a closed-loop, self-sustaining system that can be used in a variety of environments. These devices present solutions to widespread issues such as pollution, deforestation, and hazardous emissions as a result of traditional cooking in developing regions around the world. A notable obstacle of these devices is power delivery. Given the varying conditions experienced by a solar panel (inclement weather, irradiance irregularities, etc.), it …

Experimental Validation Of An Analytical Transient Model For Saturated Boosting Gain In Dc–Dc Converters With Variable Duty Cycle, Goliana Samir, Simon Ezzat, Wagdy Anis, Sameh O. Abdellatif

Electrical Engineering

No abstract provided.

Battery Energy Storage System, Alec C. Maclean, Kaylen H. Schwartz, Kyle A. Begley

Electrical Engineering

The project is a continuation of part 1 of the “Reliability Measurement for Grid-Connected Solar System” project. The goal is to continue where the previous design failed. This project will configure an ITECH IT-6000C and Tabuchi Battery Energy Storage System (BESS) to the small-scale microgrid at the Cal Poly, San Luis Obispo EE Department. Initially, a system was designed to connect an ITECH IT-M3633 as a PV solar source emulator to the Tabuchi BESS within a grid-connected microgrid system in Room 20-102 at Cal Poly. A Photovoltaic Thevenin equivalent model was developed for the ITECH IT-M3633, but this setup failed …

Advancing Embedded Iot Architectures For Space And Terrestrial Applications, Wuwei Douglas Liu, Nicolas Jesus Alvarez, Eric Huang

Electrical Engineering

Radio transceivers play a pivotal role in establishing communication networks, particularly in regions where existing infrastructures are unstable or compromised due to natural disasters or conflicts. By utilizing LoRa (Long Range) communication technology, OWL Integrations develops radio transceivers to establish mesh networks to communicate with one another during disasters. This project team continues development of a second generation OWL board, classified as Quacker Advanced Development (QuAD), with a focus on transitioning to a new microcontroller and integrating GNSS libraries and drivers. An ulterior objective involved R&D for a space application of the board.

Ross Dam Micro Hydropower Project, Ryan Pospichal, Wilson Szeto

Electrical Engineering

In 2020, Utica Water and Power Authority (UWPA) commissioned the development and installation of a micro hydropower system for Ross Dam in northern California. The micro-hydro system was intended to serve as a reliable source of renewable energy to power on-site equipment for monitoring the Ross Reservoir. Despite its innovative approach, the system encountered operational shortcomings, including frequent mechanical failures, rapid wear, and an inability to adapt to variable flow rates. To address these challenges, UWPA has commissioned interdisciplinary teams of Mechanical Engineering (ME) and Electrical Engineering (EE) students to redesign the micro hydropower system. The ME team was entrusted …

X-Band Wireless Power Transfer System Using A Focused Array Lens, Jason Alexander Kunz, Tyler S. Bury, Oscar Damian Gonzalez, Jaime Garcia

Electrical Engineering

Wireless power beaming from space and energy harvesting were once stories of science fiction, until now. Wireless power transmission (WPT) is a field continually in development to provide energy in situations where energy transfer through wires is impractical or unfeasible. This engineering discipline abandons the use of wire technology for the energy transfer between the power source and a distant device. While various forms of WPT exist, our project focuses on transmission through means of radio frequency (RF), utilizing electromagnetic waves to power devices. Furthermore, WPT technology primarily assists in the elimination of a physical connection between devices, and it …

Design Of High Efficiency Doherty Power Amplifier, Kobi G. Kelly, Severin Pindell

Electrical Engineering

The project includes design and fabrication of a high efficiency power amplifier for a student design competition held at International Microwave Symposium (IMS) 2023. Efficient power amplifiers are critical for base station communication requiring efficient use of available power. The final design optimizes power added efficiency (PAE) and linearity. The amplifier will operate at 2.45 GHz. Competitive PAE above 50%, and C/I above 30 dB is achieved by leveraging a Doherty class amplifier using accurate discrete CGH4006P transistor models to simulate an efficient and linear design. Unique design features include optimal transistor bias point selection and power split ratios between …

A 4-Switch Buck-Boost Dc/Dc Converter For Electric Vehicle Applications, Andrew Hudak, Ashley Schiller

Electrical Engineering

In this project, we develop a four switch buck-boost DC/DC converter that is to be integrated into a microgrid-inspired power distribution architecture for electric vehicles. The overall architecture includes DC/DC and DC/AC converters for bi-directional energy transfer between the DC and AC ports along with a communications port to control each energy interface. There is also the onboard battery and the internal combustion engine power exchange being done with DC/DC converters and AC/DC inverters to connect to the centralized DC bus. Hardware prototypes using an Arduino and Raspberry Pi for the 500 W DC/DC and DC/AC converters have been previously …

Improvements Of Hybrid Ac/Dc House Prototype, Arden Abude

Electrical Engineering

This is an iteration from previous designs of the Hybrid AC/DC House with a systematic addition of a portable AC power supply unit. This iteration for the Hybrid AC/DC House is an innovation of independence for sustainable housing solutions. It will serve as an alternative for rural communities needing power to rely on self-sustainable microgrids rather than large-scale AC electric grids. The addition of a portable AC power supply would allow the microgrid to remove its reliance on AC power from the larger grid and would elevate the system to complete energy independence. The microgrid has DC power generated from …

Pre‑Sizing Online Tool For Photovoltaic Water Pumping System: Development, Testing, Validation, And Evaluation, Sameh O. Abdellatif, Hani Ghali, Ibrahem Mohamed Mahmoud, Ahmed Hatem, Abdullah Hatem

Electrical Engineering

No abstract provided.