Power and Energy Commons^™

Portable Nano-Hydro Power Generator For The Dc House Project, Andrew Aw, James Biggs

Electrical Engineering

This senior project report explains the construction and design of a small, portable water generator that converts kinetic energy flowing in small creeks to electrical energy as a renewable source of energy for the DC House. The DC House, in short, is a project to build a self-sustainable house for Third World countries that utilizes only DC electricity. The system consists of two converters and a charge controller for a 12V lead-acid battery. The first converter converts the hydro generator voltage output to 15 Volts for safe and proper charging of the lead-acid battery by the charge controller. The second …

Fea Estimation And Experimental Validation Of Solid Rotor And Magnet Eddy Current Loss In Single-Sided Axial Flux Permanent Magnet Machines, Xu Yang

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

The rotor and magnet loss in single-sided axial ux permanent magnet (AFPM) machines with non-overlapped windings is studied in this dissertation. Finite element analysis (FEA) estimations of the loss are carried out using both 2D and 3D modeling. The rotor and magnet losses are determined separately for stator slot passing and MMF space harmonics from currents in the stator. The segregation of loss between the solid rotor plate and the magnet is addressed. The eddy current loss reduction by magnet segmentation is discussed as well. Two prototype 24 slot/22 pole single-sided AFPMs, fabricated with both single layer (SL) and double …

Understanding Vehicular Traffic Behavior From Video: A Survey Of Unsupervised Approaches, Brendan Tran Morris, Mohan Manubhai Trivedi

Electrical & Computer Engineering Faculty Research

Recent emerging trends for automatic behavior analysis and understanding from infrastructure video are reviewed. Research has shifted from high-resolution estimation of vehicle state and instead, pushed machine learning approaches to extract meaningful patterns in aggregates in an unsupervised fashion. These patterns represent priors on observable motion, which can be utilized to describe a scene, answer behavior questions such as where is a vehicle going, how many vehicles are performing the same action, and to detect an abnormal event. The review focuses on two main methods for scene description, trajectory clustering and topic modeling. Example applications that utilize the behavioral modeling …

Solar Photovoltaic Water Pumping For Multiple Use Systems (Mus) In Nepal, Fintan Mcloughlin, Aidan Duffy, Michael Conlon

Conference Papers

This paper investigates the performance of five solar photovoltaic (PV) Multiple Use Systems (MUS) used for water pumping. The solar MUS’s provide water for drinking, cleaning and micro-irrigation for some of the poorest communities in Nepal. In the absence of data logging, the performance of each system is investigated based on a series of rules of thumb to determine the predicted, expected and estimated demand and supply of water to small rural communities. The systems are compared based on their technical and economic performance and how this relates to local environmental, physical and socioeconomic characteristics at each location.

Maximising Value Of Electrical Networks For Wave Energy Converter Arrays, Fergus Sharkey, Elva Bannon, Michael Conlon, Kevin Gaughan

Articles

Currently there are the beginnings of a commercial wave energy industry and the ultimate ambition will be to deploy Wave Energy Converters (WECs) in arrays, or wave farms, in a similar fashion to offshore wind. These arrays will require electrical networks to collect and export the generated electrical power to shore and onto the electrical grid. For large scale wind farms the inter-array and export electrical networks can represent more than 20% of the project’s capital expenditure. Submarine power cables account for a large proportion of this cost. The same is expected to be the same for WEC arrays.

This …

Impacts On The Electrical System Economics From Critical Design Factors Of Wave Energy Converters And Arrays, Fergus Sharkey, Michael Conlon, Kevin Gaughan

Conference papers

It is expected that ultimately, like offshore wind farms, electrical systems will make up to a quarter of the overall Capex of wave farms. This is a significant element of cost and consideration must be taken in the design of both individual wave energy converters (WECs) and arrays of WECs to ensure that these costs can be minimised. In a worst case scenario design decisions could increase the cost of the electrical system by several orders and ultimately make the technology uncompetitive.

This paper outlines the impacts on the cost of the electrical system arising from design factors of WECs …

Resource-Induced Voltage Flicker For Wave Energy Converters – Assessment Tools, Fergus Sharkey, Joe Macenri, Elva Bannon, Michael Conlon, Kevin Gaughan

Articles

For wave energy converters, the input resource has a typical period of 5–20 s depending on the site location and dominant seastates. Wave energy converters generally produce mechanical power twice per wave cycle and therefore depending on the storage available, the electrical power output has half the period of the input resource. These regular power changes induce a voltage change at the point of connection (POC) which is proportional to the amplitude of the power change and at the same frequency. Therefore the coupling of the input resource to the output power of a wave energy converter will cause voltage …

Electrical Design Considerations And Packaging Of Power Electronic Modules, Shijie Wang

Graduate Theses and Dissertations

A modern power electronic module can save significant energy usage in the power electronic systems by improving their switching efficiencies. One way to improve the efficiency of the power electronic module is to reduce its parasitic circuit elements. The purpose of this thesis is to investigate the mitigation of parasitic circuit elements in power electronic modules. General methods of mitigating parasitic inductances were analyzed by the Q3D Extractor and verified by the time-domain reflectometry (TDR) measurements. In most cases, the TDR measurement results closely matched those predicted by the Q3D Extractor. These methods were applied to design and analyze a …

2-Dimensional Personal Motion Energy Harvester For Low Power Electronics, Manuel Gutierrez, Sean Scott, Dimitrios Peroulis

The Summer Undergraduate Research Fellowship (SURF) Symposium

In a lab, it becomes crucial to have a way to monitor that lab workers aren’t exposed to too much radiation. Such a device that detects this should have an energy harvester so that batteries aren’t required. The need for an energy harvester that generates power from a user’s movements in 2 dimensions is needed. This energy harvester is needed to power a radiation monitor. An energy harvester that generates power based off movements in 2 dimensions was developed. The energy harvester was created through a series of prototypes. Each prototype was built from a CAD drawing and a stereolithography …

Three-Phase Reduced Switch Topologies For Ac-Dc Front-End And Single-Stage Converters, Dunisha Wijeratne

Electronic Thesis and Dissertation Repository

Conventional three-phase ac-dc converters have two converter stages. They have a front-end converter that converts the input ac voltage into an intermediate dc bus voltage and a second, back-end converter that converts this dc bus voltage into the desired isolated dc output voltage. The front-end converter also performs power factor correction (PFC) and shapes the three-phase input currents so that they are nearly sinusoidal and in phase with the three-phase input voltages. This allows the ac power source to be used in the most efficient manner.

The front-end ac-dc converter is typically implemented with six switches while the back-end dc-dc …

Direct Power Control Of Dfigs Based Wind Energy Generation Systems Under Distorted Grid Voltage Conditions, Emad Gameil Shehata E. G. Shehata

Emad Gameil Shehata E. G. Shehata

This paper presents an improved direct power control (DPC) strategy of a wind turbine driven doubly fed induction generators (DFIGs) connected to distorted grid voltage conditions. A coordinate control strategy of the grid side converter (GSC) and rotor side converter (RSC) of the DFIG is designed to improve the overall scheme performance. The RSC is controlled based on a DPC principle to eliminate the electromagnetic torque and stator reactive power oscillations. The total active and reactive power oscillations are compensated by the GSC control to achieve constant active and reactive powers from the overall DFIG system. A current control scheme …

Voltge & Reactive Power Control In Oman Transmission System, Omar H. Abdalla, Rashid Al-Badwawi, Hilal Al-Hadi, Hisham Al-Riyami, Ahmed Al-Nadabi, Karim Karoui, Ariadne Szekut

Omar H. Abdalla

The paper presents voltage and reactive power control in the Main Interconnected Transmission System (MITS) in the Sultanate of Oman. The objective is to improve voltage profile at substations supplying distribution companies and directly connected bulk customer. An objective function is used to maximize reactive power margin of generating units to maintain as much as possible reserves on different generators. The control parameters include existing voltage and reactive power control means, e.g. settings of generators’ excitation/AVR, transformer tap-changing, and capacitor bank switching. The constraints include operational limits of the above control devices in addition to allowable limits of busbar voltages, …

Alternative Wheelchair Control System, Jessica Hendricks, Tara Keigharn

Electrical Engineering

We geared this project towards assisting an individual with limited[1] motor function to operate a wheelchair. The product targets individuals who find use of a joystick is ineffective or painful. We focused our design on the wheelchair bought from Adaptive Driving Systems (Driving, 2013); but ultimately we would like to field a final product capable of applying to any electric wheelchair. Our goal: a person to operate the electric wheelchair using sensors that transmit a translation of an individual’s hand movement through a wireless transmission to a microcontroller installed on the wheel chair that then controls the wheelchair’s movement. …

The Bicycle-Powered Smartphone Charger, Chris Arntzen

Master's Theses

This thesis entails the design and fabrication of a smartphone charger that is powered by a bicycle dynamo hub. In addition to the design and validation of the charger prototype, this thesis involves the testing and characterization of the dynamo hub power source, the design and construction of specialized test equipment, and the design and prototyping of a handlebar-mounted case for the smartphone and charging electronics. With the intention of making the device a commercial product, price, aesthetics, and marketability are of importance to the design. An appropriate description of the charger circuit is a microcontroller-based energy management system, tailored …

Cal Poly Wind Power Research Center Power Regulator, Ricardo Rodriguez, Steven Bounchareune

Electrical Engineering

Through funding from the California Central Coast Research Partnership (C3RP) the

CPWRC, led by Dr. Patrick Lemieux, has erected a horizontal axis wind turbine (HAWT) at the

Cal Poly Escuela Ranch site EL04. With the help of Dr. John Ridgely and Dr. Art MacCarley, the team has implemented a controller that delivers the power being generated by the turbine to a resistor bank which maintains a safe working speed for the turbine. The authors objectives for this project are to (1) become familiar with the operation of the turbine, (2) develop an AC-DC converter that regulates the output of the …

Bi-Directional Flyback Dc-Dc Converter For Battery System Of The Dc House Project, Austin J. Luan

Master's Theses

The DC House project strongly relies on renewable energy sources to provide power to the house for various loads. However, when these sources are unable to provide power at a certain time, a back-up energy source from a battery must be readily available to fulfill the house’s power needs. This thesis proposes a bi-directional flyback power converter to allow a single-stage power path to charge the battery from and to discharge the battery to the DC House 48 V system bus. The design, simulation, and hardware prototype of the proposed flyback bi-directional converter will be conducted to demonstrate its feasibility. …

Multiple Input Single Output (Miso) Tablet/ Phone Charger, Kevin Wong

Master's Theses

This thesis entails the design and implementation of a multiple input single output (MISO) DC-DC converter using the flyback topology to charge tablets/ smartphones or any USB powered portable device. The MISO converter will enable the use of various renewable energy sources such as a solar panel/ rechargeable battery combination, bicycle dynamo, hydroelectric power, and wind turbine. This paper will cover the design, simulations, and test results of the MISO converter. The flyback topology was chosen due to its low part count and its efficiency at low power. The proposed converter has a nominal 12V input to output USB 2.0 …

Design, Fabrication, And Testing Of An Emr Based Orbital Debris Impact Testing Platform, Jeffrey J. Maniglia Jr.

Master's Theses

This paper describes the changes made from Cal Poly’s initial railgun system, the Mk. 1 railgun, to the Mk. 1.1 system, as well as the design, fabrication, and testing of a newer and larger Mk. 2 railgun system. The Mk. 1.1 system is developed as a more efficient alteration of the original Mk. 1 system, but is found to be defective due to hardware deficiencies and failure, as well as unforeseen efficiency losses. A Mk. 2 system is developed and built around donated hardware from the Naval Postgraduate School. The Mk. 2 system strove to implement an efficient, augmented, electromagnetic …

Vehicle-To-Grid (V2g) Reactive Power Operation Analysis Of The Ev/Phev Bidirectional Battery Charger, Mithat Can Kisacikoglu

Doctoral Dissertations

More battery powered electric vehicles (EVs) and plug-in hybrid electric vehicles (PHEVs) will be introduced to the market in 2013 and beyond. Since these vehicles have large batteries that need to be charged from an external power source or directly from the grid, their charging circuits and grid interconnection issues are garnering more attention.

It is possible to incorporate more than one operation mode in a charger by allowing the power to flow bidirectionally. Usually, the bidirectional power transfer stands for two-way transfer of active power between the charger and the grid. The general term of sending active power from …

A Power Line Inspection Device, Brendan Gates

Honors College

The goal of this project is to create a functional power line inspection device which could replace the old inspection method of using helicopters. This microchip based robotic device is able to ride along a conductor and send video feed, encoder readouts, and temperature measurements to the user. The user operating system consists of an LCD screen, two potentiometers for motor control, and a screen to display video feed. Achieved specifications include a battery lifetime of 1 hour and 45 minutes, distance measurements within 1 inch, and temperature accuracy within 2 °C. This thesis includes a brief discussion on previous …

Intermediate Band Solar Cells Based On Inas Quantum Dots Embedded In Ingaas Quantum Well, Ramesh Vasan

Graduate Theses and Dissertations

Intermediate band solar cells based on quantum dots and quantum wells with anti-reflection coating are investigated in this thesis. The demand for high efficient solar cells as an alternate source of energy is the main motivation for this research project. Intermediate band solar cells based on quantum dots were the subject of intensive research in recent years. High power conversion efficiency was predicted from InAs/GaAs intermediate band solar cells as the presence of InAs quantum dots increased the absorption below the band gap of the host material.

In this thesis, an attempt has been made to further increase the absorption …

Synthesis Of Optimized Inp/Zns Core/Shell Nanocrystals And Tio2 Nanotubes For Quantum Dot Sensitized Solar Cells, Seungyong Lee

Graduate Theses and Dissertations

Synthesis of InP/ZnS core/shell nanocrystals and TiO₂ nanotubes and the optimization study to couple them together were explored for quantum dot sensitized solar cells. Its intrinsic nontoxicity makes the direct band gap InP/ZnS core/shell be one of the most promising semiconductor nanocrystals for optoelectric applications, with the advantage of tuning the optical absorption range in the desired solar spectrum region. Highly luminescent and monodisperse InP/ZnS nanocrystals were synthesized in a non-coordinating solvent. By varying the synthesis scheme, different size InP/ZnS nanocrystals with emission peaks ranging from 520 nm to 620 nm were grown. For the purpose of ensuring air …

Modeling And Analysis Of A Dynamic Voltage Regulator, Timothy David Haskell

Master's Theses

Increased government funding and incentives in recent years has led to an increase in the number of grid-tied renewable energy sources as their economic benefits become more renowned. Unfortunately, the outputs of these renewable resources are often highly variable, resulting in undesirable voltage disruptions that are harmful to sensitive loads. In addition to the energy variability of renewable energy sources, random voltage sags, swells and disruptions are already a major issue in power systems. Recent advances in power electronic devices have provided a platform for new solutions to the voltage support problem in power systems. One promising solution is the …

Wireless Transmission Network : A Imagine, Radhey Shyam Meena Engineer, Neeraj Kumar Garg Asst.Prof

Radhey Shyam Meena

World cannot be imagined without electrical power. Generally the power is transmitted through transmission networks. This paper describes an original idea to eradicate the hazardous usage of electrical wires which involve lot of confusion in particularly organizing them. Imagine a future in which wireless power transfer is feasible: cell phones, household robots, mp3 players, laptop computers and other portable electronic devices capable of charging themselves without ever being plugged in freeing us from that final ubiquitous power wire. This paper includes the techniques of transmitting power without using wires with an efficiency of about 95% with non-radioactivemethods. In this paper …

Battery Energy Storage System In Solar Power Generation, Radhey Shyam Meena Er., Deepa Sharma

Radhey Shyam Meena

Grid-connected solar PV dramatically changes the load profile of an electric utility customer. The expected widespread adoption of solar generation by customers on the distribution system poses significant challenges to system operators both in transient and steady state operation, from issues including voltage swings, sudden weather-induced changes in generation, and legacy protective devices designed with one-way power flow in mind

Reverse Stress Metastability Of Shunt Current In Cigs Solar Cells, Sourabh Dongaonkar, Erik Sheets, Rakesh Agrawal, Muhammad Alam

Sourabh Dongaonkar

Partial shading in thin film solar panels can result in reverse bias stress across shaded cells. Therefore, it is important to understand the effect of such reverse stress in commercially competitive PV technologies such as CIGS. In this paper, we systematically investigate the effect of moderate reverse bias on solution-processed CIGS solar cells. We subject the solar cells to varying degrees of reverse biases and continuously monitor the impact of the stress on dark current. We also explore the relaxation behavior of dark current following passive storage and the long term effect of the shadow stress on power output of …

Biparametric Analyses Of Charge Trapping In Cd0.9Zn0.1Te Based Virtual Frisch Grid Detectors, S. K. Chaudhuri, K. J. Zavalla, R. M. Krishna, K. C. Mandal

Faculty Publications

No abstract provided.

Experimental Determination Of Electron-Hole Pair Creation Energy In 4h-Sic Epitaxial Layer: An Absolute Calibration Approach, S. K. Chaudhuri, K. J. Zavalla, K. C. Mandal

Faculty Publications

No abstract provided.

At89c51 Microcontroller Based Control Model For Hybrid Assistive Limb (Knee ), Suresh L

suresh L

In this paper, a controlling system is implemented for a wearable walking supporting device so called as Hybrid Assistive Limb. The control circuit is implemented without considering the biological signals of the human body for the knee part, which is based on the knee joint moment from the human body model. The control and a driving circuit s are implemented to assistive the knee as for the requir ement of knee joint dynamics.

Battery Energy Storage System In Solar Power Generation, Radhey Shyam Meena Er.

Radhey Shyam Meena

As solar photovoltaic power generation becomes more commonplace, the inherent intermittency of the solar resource poses one of the great challenges to those who would design and implement the next generation smart grid. Specifically, grid-tied solar power generation is a distributed resource whose output can change extremely rapidly, resulting in many issues for the distribution system operator with a large quantity of installed photovoltaic devices. Battery energy storage systems are increasingly being used to help integrate solar power into the grid. These systems are capable of absorbing and delivering both real and reactive power with sub-second response times. With these …