Other Electrical and Computer Engineering Commons^™

Improved Methodology For Conducted Emi Assessment Of Power Electronics And Line Impedance Measurement, Mark Anthony Didat

Theses and Dissertations

Electromagnetic Interference (EMI), primarily common mode (CM), is problematic in a wide range of electronic circuits due to its propensity to radiate, particularly in high power applications. It is routine for much effort and resources to be dedicated to its characterization and reduction as EMI compliance is a requirement for most electronic systems and devices, including power electronics. Many well-known factors contribute to a system’s EMI performance including intentional coupling from system components as well as unintentional coupling from parasitics. Sources of intentional coupling may include Y-capacitors intended to mitigate EMI as part of a filter. Unintentional coupling is more …

Network Layer Reliability And Security In Energy Harvesting Wireless Sensor Networks, Jing Yang

Theses and Dissertations

Wireless sensor networks (WSNs) have become pivotal in precision agriculture, environmental monitoring, and smart healthcare applications. However, the challenges of energy consumption and security, particularly concerning the reliance on large battery-operated nodes, pose significant hurdles for these networks. Energy-harvesting wireless sensor networks (EH-WSNs) emerged as a solution, enabling nodes to replenish energy from the environment remotely. Yet, the transition to EH-WSNs brought forth new obstacles in ensuring reliable and secure data transmission.

In our initial study, we tackled the intermittent connectivity issue prevalent in EH-WSNs due to the dynamic behavior of energy harvesting nodes. Rapid shifts between ON and OFF …

Amorphous Boron Carbide-Amorphous Silicon Heterojunction Devices, Vojislav Medic

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

This dissertation will show successful development and characterization of amorphous boron carbide-amorphous silicon heterojunction device with potential for neutron detection. The amorphous hydrogenated boron carbide (a-BC:H) has been extensively researched as a semiconductor for neutron voltaic device fabrication. Naturally occurring boron contains 19.8% of boron isotope B¹⁰ that has a high absorption cross section of thermal neutrons at lower energies, and boron carbide contains 14.7% of that B¹⁰ isotope. Therefore, as a semiconductor compound of boron a-BC:H has the ability to absorb radiation, generate charge carriers, and collect those carriers. Previous work on a-BC:H devices investigated the fabrication …

Low-Power, Event-Driven System On A Chip For Charge Pulse Processing Applications, Joseph A. Schmitz

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

This dissertation presents an electronic architecture and methodology capable of processing charge pulses generated by a range of sensors, including radiation detectors and tactile synthetic skin. These sensors output a charge signal proportional to the input stimulus, which is processed electronically in both the analog and digital domains. The presented work implements this functionality using an event-driven methodology, which greatly reduces power consumption compared to standard implementations. This enables new application areas that require a long operating time or compact physical dimensions, which would not otherwise be possible. The architecture is designed, fabricated, and tested in the aforementioned applications to …

Digital Filter Implementation On A Dsp Development Board, Tien Le, Helen Zhang

Electrical Engineering

This project to implement digital filters on a Digital Signal Processor (DSP) development board intends to demonstrate viability for future use in teaching digital signal processing lab courses. The digital filter types covered, including Finite Impulse Response (FIR) and Infinite Impulse Response (IIR) filters of various basic frequency responses, will mirror current DSP lab projects to fulfill course learning objectives for filter design and characterization. Design features will include speed optimization to enable real-time digital signal processing. This project will investigate the use of Code Composer Studio to compile C and assembly code to the DSP. Alternatives for currently available …

Electrical Characteristics Of In-House Produced Micro/Nanodielectrics, Dewan Mahmudullah

Graduate Theses and Dissertations (2019 - present)

Dielectric characterization is very important across a wide range of applications, including the design and optimization of capacitors, electrical insulation, and electronic devices. It plays a vital role in providing valuable insights for material selection, performance evaluation, and the development of advanced dielectrics. The permittivity of dielectrics is a fundamental property of dielectric materials that quantifies their ability to store and dissipate energy in the presence of an electric field. Studies for developing advanced dielectrics and accurate measurements of the dielectric constant are essential for understanding and optimizing the performance of various electrical and electronic systems. The objective of this …

Characterization Of Human Mobility From Cellular Data, Zaid Matloub

Theses and Dissertations

This dissertation investigates human mobility patterns using crowd-sourced cellular network data from different Metropolitan Statistical Areas (MSAs) in the United States, spanning the Houston, New York-Newark, NJ City, and 13 other significant MSAs. By focusing on prominent spatial mobility parameters highlighted in existing literature, the study unveils consistent findings regarding the predictability of human mobility across diverse time scales and geographic regions. The research underscores the significance of selecting appropriate sampling thresholds based on the mobility parameters being examined, the size of the dataset, and available computational resources. Through a meticulous analysis, it emerges that while values such as mean …

Strategies For Optimizing Plasmonic Grating Couplers With A Topology-Based Inverse Design, Michael Efseaff, Mark C. Harrison

Engineering Faculty Articles and Research

Numerical simulations have become a cornerstone technology in the development of nanophotonic devices. Specifically, 3D finite-difference time domain (FDTD) simulations are widely used due to their flexibility and powerful design capabilities. More recently, FDTD simulations in conjunction with a design methodology called inverse design has become a popular way to optimize device topology, reducing a device’s footprint and increasing performance. We implement a commercial inverse design tool to generate complex grating couplers and explore a variety of grating coupler design methodologies. We compare the conventionally designed grating couplers to those generated by the inverse design tool. Finally, we discuss the …

Towards A Virtual Reality Visualization Of Hand-Object Interactions To Support Remote Physical Therapy, Trudi Di Qi, Louanne Boyd, Scott Fitzpatrick, Meghna Raswan, Franceli L. Cibrian

Engineering Faculty Articles and Research

Improving object manipulation skills through hand-object interaction exercises is crucial for rehabilitation. Despite limited healthcare resources, physical therapists propose remote exercise routines followed up by remote monitoring. However, remote motor skills assessment remains challenging due to the lack of effective motion visualizations. Therefore, exploring innovative ways of visualization is crucial, and virtual reality (VR) has shown the potential to address this limitation. However, it is unclear how VR visualization can represent understandable hand-object interactions. To address this gap, in this paper, we present VRMoVi, a VR visualization system that incorporates multiple levels of 3D visualization layers to depict movements. In …

Improving Cellphone-Based Bio-Imaging Technique For Fluorescence Detection, Erteza T. Efaz

LSU Master's Theses

The research presented in this thesis focuses on the design, development, and evaluation of a fluorescence detection system. The system is implemented primarily as an Android application, Auto Camera, which leverages smartphone cameras to capture and analyze fluorescent images. The application provides a user-friendly interface with some configurable features like exposure time, ISO speed, and storage limit; as well as defining detection thresholds and setting acquisition intervals. This study begins with the architectural framework of the Android application, which is written in Java using Android Studio. The API compatibility is set to version 33, and users are prompted to grant …

Inverse Engineering Of Absorption And Scattering In Nanoparticles: A Machine Learning Approach, Alex Vallone, Nooshin M. Estakhri, Nasim Mohammadi Estrakhri

Engineering Faculty Articles and Research

We use a region-specified machine learning approach to inverse design highly absorptive multilayer plasmonic nanoparticles. We demonstrate the design of particles with a wide range of absorption to scattering ratios (i.e., cloaked absorbers and bright absorbers) and for different visible wavelengths.

Distribution Of Magnetic Flux In Magnetic Chains Of Angular Displacement Measuring Transformer Converters With Variable Active Surface Of Movement Core, Sulton Faizullayevich Amirov, Ulugbek Shukhratovich Mamadaliyev, Absaid Khurramovich Sulliev

Chemical Technology, Control and Management

In the article, the magnetic chain of a differential type angular displacement transformer converter with a variable active area of a movable ferromagnetic ring is considered as a magnetic chain with distributed parameters in which the thickness of the movable ferromagnetic ring is a linear function of the angular displacement of the converter. It is shown that although in magnetic chains with a special distribution structure of the magnetic parameters of the resistance of ferromagnetic rings and the magnetic conductivity of the working gap between the rings, the same conditions are created for the passage of the lines of force …

Furthering Development Of Smart Fabrics To Improve The Accessibility Of Music Therapy, Ellie Nguyen, Daisy Z. Fernandez-Reyes, Franceli L. Cibrian

Engineering Faculty Articles and Research

In this paper, we present the design and development of HarmonicThreads, a smart, cost-effective fabric augmented by generative machine learning algorithms to create music in real time according to the user's interaction. In this manner, we hypothesize that individuals with sensory differences could take advantage of the fabric's flexibility, the music will adapt according to users' interaction, and the affordable hardware we propose will make it more accessible. We follow a design thinking methodology using data from a multidisciplinary team in Mexico and the United States. Then we will close this paper by discussing challenges in developing accessible smart fabrics …

Self-Dual Systems For Backscattering Cancellation, Nasim Mohammadi Estrakhri

Engineering Faculty Articles and Research

Using carefully arranged electric and magnetic components, we have recently demonstrated that backscattering from otherwise arbitrarily shaped two- and three-dimensional structures can be fully eliminated. Here, first we investigate the possibility of creating self-dual microwave absorbers that may provide advantages compared to typical commercial magnetoelectric absorbers. Next, we demonstrate that the self-duality condition is not limited to homogenous structures and may be extended to effective material properties, opening the door to realistic implementation of these structures at microwave and optical frequencies.

Modeling And Compensating Of Noise In Time-Of-Flight Sensors, Bryan Rodriguez

Electrical Engineering Theses and Dissertations

Three-dimensional (3D) sensors provide the ability to perform contactless measurements of objects and distances that are within their field of view. Unlike traditional two-dimensional (2D) cameras, which only provide RGB data about objects within a scene, 3D sensors are able to directly provide depth information for objects within a scene. Of these 3D sensing technologies, Time-of-Flight (ToF) sensors are becoming more compact which allows them to be more easily integrated with other devices and to find use in more applications. ToF sensors also provide several benefits over other 3D sensing technologies that increase the types of applications where ToF sensors …

Uncertainties In Retrieval Of Remote Sensing Reflectance From Ocean Color Satellite Observations, Eder I. Herrera Estrella

Dissertations, Theses, and Capstone Projects

Ocean Color radiometry uses remote sensing to interpret ocean dynamics by retrieving remote sensing reflectance (������) from satellite imagery at different scales and over different time periods. ������ spectrum characterizes the ocean color that we observe, and from which we can discern concentrations of chlorophyll, organic and inorganic particles, and carbon fluxes in the ocean and atmosphere. ������ is derived from the total radiance at the top of the atmosphere (TOA). However, it only represents up to ten percent of the total signal. Hence, the retrieval of ������ from the total radiance at TOA involves the application of atmospheric correction …

A Study On Rapidly Exploring Random Tree Algorithms For Robot Path Planning, Sahil Sharma

Master's Theses

Robot path planning is a critical feature of autonomous systems. Rapidly-exploring Random Trees (RRT) is a path planning technique that randomly samples the robot configuration space to find a path between the start and end point. This thesis studies and compares the performance of four important RRT algorithms, namely, the original RRT, the optimal RRT (also termed RRT*), RRT*-Smart, and Informed RRT* for six different environments. The performance measures include the final path length (which is also the shortest path length found by each algorithm), time to find the first path, run time (of 1000 iterations) for each algorithm, total …

An Animated Introduction To Digital Logic Design, John D. Carpinelli

Open and Affordable Textbooks

There is a newer edition of this textbook available here.

This book is designed for use in an introductory course on digital logic design, typically offered in computer engineering, electrical engineering, computer science, and other related programs. Such a course is usually offered at the sophomore level. This book makes extensive use of animation to illustrate the flow of data within a digital system and to step through some of the procedures used to design and optimize digital circuits.

All of the animations for this book can be found here: https://digitalcommons.njit.edu/dld-animations/

The Relaying Network In Free-Space Optical Communications Using Optical Amplifiers In Cascaded Configuration, Ucuk Darusalam, Arockia Bazil Raj, Fitri Yuli Zulkifli, Purnomo Sidi Priambodo, Eko Tjipto Rahardjo

Makara Journal of Technology

Optical relaying is the best technique to implement free-space optical (FSO) communications as a terrestrial platform. However, atmospheric turbulence (AT) limits the optical-propagation path length. In this study, the implementation of some optical amplifiers (OAs) in cascaded configuration, namely, erbium-doped fiber amplifiers, semiconductor OAs, and Raman amplifiers (RAs), are investigated through simulation. This study aims to search for the maximum link distance of an optical propagation and enhance the FSO performance caused by each configuration of OAs. The optical relaying network consists of three nodes, with each node designed with a space of several kilometers under the influence of AT. …

Watch: A Distributed Clock Time Offset Estimation Tool On The Platform For Open Wireless Data-Driven Experimental Research, Cassie Jeng

McKelvey School of Engineering Graduate Student Theses & Dissertations

The synchronization of the clocks used at different devices across space is of critical importance in wireless communications networks. Each device’s local clock differs slightly, affecting the times at which packets are transmitted from different nodes in the network. This thesis provides experimentation and software development on POWDER, the Platform for Open, Wireless Data-driven Experimental Research, an open wireless testbed across the University of Utah campus. We build upon Shout, a suite of Python scripts that allow devices to iteratively transmit and receive with each other and save the collected data. We introduce WATCH, an experimental method to estimate clock …

Resource Optimization Of Edge Servers Dealing With Priority-Based Workloads By Utilizing Service Level Objective-Aware Virtual Rebalancing, Amna Shahid

Theses and Dissertations

IoT enables profitable communication between sensor/actuator devices and the cloud. Slow network causing Edge data to lack Cloud analytics hinders real-time analytics adoption. VRebalance solves priority-based workload performance for stream processing at the Edge. BO is used in VRebalance to prioritize workloads and find optimal resource configurations for efficient resource management. Apache Storm platform was used with RIoTBench IoT benchmark tool for real-time stream processing. Tools were used to evaluate VRebalance. Study shows VRebalance is more effective than traditional methods, meeting SLO targets despite system changes. VRebalance decreased SLO violation rates by almost 30% for static priority-based workloads and 52.2% …

Consensus-Based Active And Reactive Power Control And Management Of Microgrids, Shruti Singh

Electronic Theses and Dissertations

Microgrids incorporating distributed generation and renewable energy sources offer potential solutions to the energy crisis while modernizing traditional grids. Despite cost-effectiveness in some technologies, financial support remains crucial for expensive ones like PV, fuel cells, and storage technologies. Microgrids bring economic benefits, efficiency, reduced emissions, and improved power quality. Their success hinges on cost reductions in renewables, storage, reliability, and energy management systems, enabling operation both with and without the utility grid.

Economic Dispatch optimizes system costs, considering all constraints. Various methods tackle this problem, including quadratic convex functions, Lagrangian relaxation, and quadratic programming. For microgrids with distributed generators, seamless …

Digital Twins And Artificial Intelligence For Applications In Electric Power Distribution Systems, Deborah George

All Theses

As modern electric power distribution systems (MEPDS) continue to grow in complexity, largely due to the ever-increasing penetration of Distributed Energy Resources (DERs), particularly solar photovoltaics (PVs) at the distribution level, there is a need to facilitate advanced operational and management tasks in the system driven by this complexity, especially in systems with high renewable penetration dependent on complex weather phenomena.

Digital twins (DTs), or virtual replicas of the system and its assets, enhanced with AI paradigms can add enormous value to tasks performed by regulators, distribution system operators and energy market analysts, thereby providing cognition to the system. DTs …

Generalizable Deep-Learning-Based Wireless Indoor Localization, Ali Owfi

All Theses

The growing interest in indoor localization has been driven by its wide range of applications in areas such as smart homes, industrial automation, and healthcare. With the increasing reliance on wireless devices for location-based services, accurate estimation of device positions within indoor environments has become crucial. Deep learning approaches have shown promise in leveraging wireless parameters like Channel State Information (CSI) and Received Signal Strength Indicator (RSSI) to achieve precise localization. However, despite their success in achieving high accuracy, these deep learning models suffer from limited generalizability, making them unsuitable for deployment in new or dynamic environments without retraining. To …

Faults Segmentation In Levee Systems Using Deep Learning Approaches, Manisha Panta

LSU New Orleans Theses and Dissertations

Levees are earthen structures constructed to mitigate flooding in low-lying areas. Although levee systems can reduce flood risks, they cannot completely eliminate them. Failures within flood control systems due to inadequate maintenance or strong water currents can lead to significant property damage and catastrophic loss of life, as was seen during Hurricane Katrina. Consequently, regular inspections are essential to identify and address any issues with the levees promptly. However, current inspection methods rely on manual techniques that are time-consuming, labor-intensive, and prone to human error. Therefore, this study proposes using deep learning models for more efficient and frequent assessment of …

High Performance Scene Generator For Testing Of Imaging Sensors, Austin Modoff

Electrical Engineering Theses and Dissertations

Since the invention of modern solid-state imaging sensors in the 1980s, considerable advancements have been made, improving aspects such as frequency response, dynamic range, resolution, and wavelength diversity, as well as inventing many different types of sensor architectures such as framing sensors and event sensors. While considerable improvements in this field are evolving every day, the methods by which to test and validate these systems remain unchanged. Many of these test platforms require specialized designs to test only one or two specific qualities. For example, a spinning disk in front of a black body source to measure the frequency response …

Hybrid Photovoltaic + Battery Energy System Grid-Tied Converter Capstone Review Thesis, Archer Taylor

University Honors Theses

Hybrid power converters present an opportunity to more efficiently harness energy from renewable sources. This paper reviews an undergraduate senior capstone project with the goal of designing and verifying the benefits of a hybrid converter, combining a photovoltaic array, battery energy system and a DC-AC inverter. The author recounts their experience throughout the 6 month period, detailing the research and design process followed by the prototype testing. Additionally, they reflect on the struggles of the capstone team and how to apply the learnings in the future.

Detecting Alzheimer's Disease Using Artificial Neural Networks, Sally Lee, Mia Keegan

Electrical Engineering

This project aims to use artificial neural networks (ANN) in order to detect Alzheimer’s disease. More specifically, convolutional neural networks (CNN) will be utilized as this is the most common ANN and has been used in many different image processing applications. The purpose of using artificial neural networks as a detect method is so that an intelligent way for image and signal analysis can be used. A software that implements CNN will be developed so that users in medical settings can utilize this software to detect Alzheimer’s in patients. The input for this software will be the patient’s MRI scans. …

Exploring The Potential Of Pavegen’S Kinetic Energy Generating Floor For Sustainable Energy Solutions: A Proposal For Cal Poly Slo, Brandon J. Cuneo

Construction Management

This paper proposes the installation of Pavegen's kinetic energy generating floors at Cal Poly’s campus as a sustainable energy solution. Pavegen has developed a pioneering technology that converts footsteps into clean and renewable energy. The versatility of these floors is demonstrated through successful implementations in various settings, such as transportation hubs and public spaces, generating power from foot traffic. Collaborations with Schneider Electric, installation at Dupont Circle, and integration at Heathrow Airport showcase the potential for sustainable urban infrastructure. This paper outlines research conducted on Pavegen and similar solutions, including communication with company representatives and examining proposed installation locations at …

Smart Table Top, Conner Sima, Nathan R. Jaggers, Jacob Barnes

Electrical Engineering

Dungeons and Dragons 5th Edition (D&D) is a tabletop role playing game (TTRPG) with complicated mechanics and a seemingly overwhelming amount of information. D&D players are often looking for ways to more effectively track information and products that enhance their game experience. One such product is a custom miniature; players use these to track their character’s location and for the enjoyment of creating a physical representation of their imagination. Virtual Tabletops (VTT’s) were developed to make the entire experience digital. The digital nature of VTT’s make all of the game’s rules and mechanics accessible at the click of the mouse; …