Other Electrical and Computer Engineering Commons^™

Electronic Profiling Of Synthetic Dna Using Schottky Junctions, Souhad M.A Daraghma

Student Works (2020-2029)

Deoxyribonucleic acid (DNA) has attracted a lot of attention lately owing to the discovery of its semiconducting property and is considered as an interesting material that could find applications in nanotechnology and electronic devices. In-depth understanding of its charge transfer mechanism is however required for effective development of DNA-based technology. This unfortunately remains still a non-trivial task despite the numerous theoretical and experimental studies that have been conducted to date. The complexity of the previously employed methods, and their lack of accuracy has made it difficult to grasp the clear understanding of the electronic behaviors of the DNA molecules under …

Technique Design Of Filter On Surface-Acoustic Waves, Dilmurod Abdujalilovich Davronbekov, Zafar Tulyaganovich Khakimov

Acta of Turin Polytechnic University in Tashkent

The article describes the design of filters on surface acoustic waves (SAWs), which are selective elements and are widely used in blocks, devices and signal processing systems in telecommunications, including wireless communication systems such as cellular, trunking and others. Designs of filters for surfactants are considered, which are divided into two large groups - by functional purpose and by a systematic approach to the synthesis of performance characteristics of filters for surfactants. Optimization algorithms and methods for synthesizing surfactant filters have been developed and improved. An improved technique for the synthesis of a filter based on surface acoustic waves is …

Solar Photovoltaic Performance Monitoring: A Bibliometric Review, Research Gaps And Opportunities, Javed Sayyad, Paresh Nasikkar

Library Philosophy and Practice (e-journal)

Electrical power generation has been revolutionized by growing demand and use of Renewable Energy (RE) sources such as Solar Photovoltaic (SPV) as the main electricity source in modern times. The main objective of this bibliometric analysis is to understand the scope of the literature available for SPV performance characterization. This detailed reviewed was performed on the documents related to SPV research considering all the subject categories from Scopus and Web of Science (WoS) databases. The patterns for the particular set of keywords were broke down with the recuperated outcomes from Scopus database in the language, publication type, year of publication, …

Conditional Generative Adversarial Network Demosaicing Strategy For Division Of Focal Plane Polarimeters, Garrett Sargent, Bradley M. Ratliff, Vijayan K. Asari

Electrical and Computer Engineering Faculty Publications

Division of focal plane (DoFP), or integrated microgrid polarimeters, typically consist of a 2 × 2 mosaic of linear polarization filters overlaid upon a focal plane array sensor and obtain temporally synchronized polarized intensity measurements across a scene, similar in concept to a Bayer color filter array camera. However, the resulting estimated polarimetric images suffer a loss in resolution and can be plagued by aliasing due to the spatially-modulated microgrid measurement strategy. Demosaicing strategies have been proposed that attempt to minimize these effects, but result in some level of residual artifacts. In this work we propose a conditional generative adversarial …

Transfer-To-Transfer Learning Approach For Computer Aided Detection Of Covid-19 In Chest Radiographs, Barath Narayanan Narayanan, Russell C. Hardie, Vignesh Krishnaraja, Christina Karam, Venkata Salini Priyamvada Davuluru

Electrical and Computer Engineering Faculty Publications

The coronavirus disease 2019 (COVID-19) global pandemic has severely impacted lives across the globe. Respiratory disorders in COVID-19 patients are caused by lung opacities similar to viral pneumonia. A Computer-Aided Detection (CAD) system for the detection of COVID-19 using chest radiographs would provide a second opinion for radiologists. For this research, we utilize publicly available datasets that have been marked by radiologists into two-classes (COVID-19 and non-COVID-19). We address the class imbalance problem associated with the training dataset by proposing a novel transfer-to-transfer learning approach, where we break a highly imbalanced training dataset into a group of balanced mini-sets and …

Novel Memristor Based True Random Number Generator, Scott Stoller

Boise State University Theses and Dissertations

Random numbers are an important, but often overlooked part of the modern computing environment. They are used everywhere around us for a variety of purposes, from simple decision making in video games such as a coin toss, to securing financial transactions and encrypting confidential communications. They are even useful for gambling and the lottery.

Random numbers are generated in many ways. Pseudo random number generators (PRNGs) generate numbers based on a formula. True random number generators (TRNGs) capture entropy from the environment to generate randomness. As our society and our devices become more connected in the digital world, it is …

Design Of A Single-Carrier Pulse Width Modulation With Submodule Fault-Tolerant Capability For Modular Multilevel Converter, Tuanku Badzlin Hashfi

Student Works (2020-2029)

Multilevel converters are attracting a lot of attention and becoming one of the energy conversion choices for new topologies and control in industry applications and research fields. Modular multilevel converters (MMCs) are considered very promising among converter topologies for future medium-voltage and high-power applications compared to NPC, FC and CHB topologies. The improved phase disposition pulse width modulation (PDPWM) technique control for MMCs, which has a fault-tolerant capability, is presented. This study presents two methods to distribute pulses into submodules (SMs) by using PDPWM which has drawback to distribute the power equally among the submodules (SMs). First method, this study …

Optimal Distribution System Reconfiguration Incorporating Dg And Variable Load Profile Using Artificial Neural Network, Hesham Hanie Youssef

Student Works (2020-2029)

Optimal network reconfiguration is a common method used in distribution systems to ensure minimum power losses are always attained. This is very important task for achieving cost effective operation. Due to varying load demands, conventional network reconfiguration techniques have to be repeated whenever system loading changes to find a new configuration that has minimum power losses. This task is time consuming and ineffective approach for a real time application. Therefore, this research proposes an Artificial Neural Network (ANN) technique for optimal distribution network reconfiguration to overcome long processing time, mainly in load variation case. The proposed method involves; (1) Implement …

Challenges To Adopting Hybrid Methodology: Addressing Organizational Culture And Change Control Problems In Enterprise It Infrastructure Projects, Harishankar Krishnakumar

Dissertations and Theses

IT infrastructure projects have long been an overlooked field superseded by the more popular software development silos and cross-functional project teams when it comes to enterprise Agile transformations. This paper presents a systematic literature review by leveraging a qualitative research methodology based on empirical evidence provided in contemporary scholarly research articles to explore how certain variables such as organizational culture- including team structure, leadership hierarchy, geolocation, etc. along with an organization’s change management processes affect the adoption of a Hybrid/Agile project management methodology, focusing on reported challenges and critical success factors that define such large-scale enterprise transformations. The salient features …

Forecasting Vegetation Health In The Mena Region By Predicting Vegetation Indicators With Machine Learning Models, Sachi Perera, Wenzhao Li, Erik Linstead, Hesham El-Askary

Mathematics, Physics, and Computer Science Faculty Articles and Research

Machine learning (ML) techniques can be applied to predict and monitor drought conditions due to climate change. Predicting future vegetation health indicators (such as EVI, NDVI, and LAI) is one approach to forecast drought events for hotspots (e.g. Middle East and North Africa (MENA) regions). Recently, ML models were implemented to predict EVI values using parameters such as land types, time series, historical vegetation indices, land surface temperature, soil moisture, evapotranspiration etc. In this work, we collected the MODIS atmospherically corrected surface spectral reflectance imagery with multiple vegetation related indices for modeling and evaluation of drought conditions in the MENA …

Optimized Transconductance Designs To Enhance The Linearity Performance Of Rf Front-End Receiver Circuits In 130 Nm Cmos Technology, Nandini Vitee

Student Works (2020-2029)

Highly linear front-end circuits are greatly desired for wireless receivers to improve the dynamic range. However, intermodulation distortions caused by the non-linear transconductor current limits the linearity of the front-end receiver circuit in CMOS technologies. In addition to the inherent nonlinear effect, the downscaling of CMOS further exacerbates the linearity of the circuit due to lower voltage headroom and high-field mobility. Thus, it is essential to develop effective circuit techniques that can aid linearity enhancement without jeopardizing other preferred performances such as low noise, high conversion gain, and low-power consumption. In this thesis, two different high linear transconductors are presented …

High Wind Alerts: A System Created With Observations From The X-Band Teaching And Research Radar, Lauren Warner

The Journal of Purdue Undergraduate Research

Following the August 13, 2011, Indiana State Fair stage collapse tragedy, caused by a wind gust from an approaching thunderstorm, Purdue University enforced a wind speed restriction of 30 mph (13 m s-1) for tents at outdoor events. During these events, volunteers stand outside with handheld anemometers, measuring and reporting when the wind speeds exceed this limit. In this study, we report testing of a new system to automate high-wind alerts based on observations from a Doppler radar, the X-band Teaching and Research Radar (XTRRA), near Purdue’s campus. XTRRA scans over campus at low elevations approximately every 5 minutes. Using …

Fault-Tolerant Capability Of Star Connected Symmetrical Six-Phase Induction Machine With Single And Two Isolated Neutrals, Wan Noraishah Wan Abdul Munim

Student Works (2020-2029)

Traditionally, electrical machines have been designed to operate with single- or three phase power supplies. In the early stage of power electronics development, three-phase machine suffers problems such as high torque ripple due to low order harmonics during six-step switching and limited current handling capacity of the power switches. This has motivated the use of multiphase machines which is capable of mitigating the aforementioned issues. The revival of multiphase machine research is mainly motivated by the need for more reliable drive systems. The vector space decomposition (VSD) model is used for a healthy multiphase machine as the basis for control …

Circus In Motion: A Multimodal Exergame Supporting Vestibular Therapy For Children With Autism, Oscar Peña, Franceli L. Cibrian, Monica Tentori

Engineering Faculty Articles and Research

Exergames are serious games that involve physical exertion and are thought of as a form of exercise by using novel input models. Exergames are promising in improving the vestibular differences of children with autism but often lack of adaptation mechanisms that adjust the difficulty level of the exergame. In this paper, we present the design and development of Circus in Motion, a multimodal exergame supporting children with autism with the practice of non-locomotor movements. We describe how the data from a 3D depth camera enables the tracking of non-locomotor movements allowing children to naturally interact with the exergame . A …

Admittance Method For Estimating Local Field Potentials Generated In A Multi-Scale Neuron Model Of The Hippocampus, Clayton S. Bingham, Javad Paknahad, Christopher Bc Girard, Kyle Loizos, Jean-Marie C. Bouteiller, Dong Song, Gianluca Lazzi, Theodore W. Berger

Engineering Faculty Articles and Research

Significant progress has been made toward model-based prediction of neral tissue activation in response to extracellular electrical stimulation, but challenges remain in the accurate and efficient estimation of distributed local field potentials (LFP). Analytical methods of estimating electric fields are a first-order approximation that may be suitable for model validation, but they are computationally expensive and cannot accurately capture boundary conditions in heterogeneous tissue. While there are many appropriate numerical methods of solving electric fields in neural tissue models, there isn't an established standard for mesh geometry nor a well-known rule for handling any mismatch in spatial resolution. Moreover, the …

A 2.56 Gbps Serial Wireline Transceiver That Supports An Auxiliary Channel And A Hybrid Line Driver To Compensate Large Channel Loss, Xiaoran Wang

Electrical Engineering Theses and Dissertations

Serial transceiver links are widely used for high-speed point-to-point communications. This dissertation describes two transceiver link designs for two different applications.

In serial wireline communications, security is an increasingly important factor to concern. Securing an information processing system at the application and system software layers is regarded as a necessary but incomplete defense against the cyber security threats. In this dissertation, an asynchronous serial transceiver that is capable of transmitting and receiving an auxiliary data stream concurrently with the primary data stream is described. The transceiver instantiates the auxiliary data stream by modulating the phase of the primary data without …

Enhanced Control Algorithms In Permanent Magnet Synchronous Machines, Haibo Li

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Permanent magnet synchronous machines (PMSMs) are gaining increasing popularity in various applications due to their advantages, such as high efficiency, high power density, and superior control performance. A well-designed machine control algorithm is indispensable for a PMSM system to secure its good performance.

In this work, enhanced control algorithms in PMSMs are developed. Online machine current trajectory tracking, source power management, hardware overcurrent regulation, and machine current sensor fault detection and isolation (FDI) are included in the developed algorithms. The online machine current trajectory tracking ensures the maximum torque per ampere (MTPA) or maximum torque per voltage (MTPV) control in …

An End-To-End Trainable Method For Generating And Detecting Fiducial Markers, J. Brennan Peace

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Existing fiducial markers are designed for efficient detection and decoding. The methods are computationally efficient and capable of demonstrating impressive results, however, the markers are not explicitly designed to stand out in natural environments and their robustness is difficult to infer from relatively limited analysis. Worsening performance in challenging image capture scenarios - such as poorly exposed images, motion blur, and off-axis viewing - sheds light on their limitations. The method introduced in this work is an end-to-end trainable method for designing fiducial markers and a complimentary detector. By introducing back-propagatable marker augmentation and superimposition into training, the method learns …

Inventory Management Of The Refrigerator's Produce Bins Using Classification Algorithms And Hand Analysis., Sarah Virginia Morris

Electronic Theses and Dissertations

Tracking the inventory of one’s refrigerator has been a mission for consumers since the advent of the refrigerator. With the improvement of computer vision capabilities, automatic inventory systems are within reach. One inventory area with many potential benefits is the fresh food produce bins. The bins are a unique storage area due to their deep size. A user cannot easily see what is in the bins without opening the drawer. Produce items are also some of the quickest foods in the refrigerator to spoil, despite being temperature and humidity controlled to have the fruits and vegetables last longer. Allowing the …

Intelligent Algorithm For Trapezoidal Interval Valued Neutrosophic Network Analysis, Florentin Smarandache, Said Broumi, Deivanayagampillai Nagarajan, Malayalan Lathamaheswari, Mohamed Talea, Assia Bakali

Branch Mathematics and Statistics Faculty and Staff Publications

The shortest path problem has been one of the most fundamental practical problems in network analysis. One of the good algorithms is Bellman-Ford, which has been applied in network, for the last some years. Due to complexity in the decision-making process, the decision makers face complications to express their view and judgment with an exact number for single valued membership degrees under neutrosophic environment. Though the interval number is a special situation of the neutrosophic, it did not solve the shortest path problems in an absolute manner. Hence, in this work, the authors have introduced the score function and accuracy …

The Effects Of Radiation On Memristor-Based Electronic Spiking Neural Networks, Sumedha Gandharava Dahl

Boise State University Theses and Dissertations

In this dissertation, memristor-based spiking neural networks (SNNs) are used to analyze the effect of radiation on the spatio-temporal pattern recognition (STPR) capability of the networks. Two-terminal resistive memory devices (memristors) are used as synapses to manipulate conductivity paths in the network. Spike-timing-dependent plasticity (STDP) learning behavior results in pattern learning and is achieved using biphasic shaped pre- and post-synaptic spikes. A TiO₂ based non-linear drift memristor model designed in Verilog-A implements synaptic behavior and is modified to include experimentally observed effects of state-altering, ionizing, and off-state degradation radiation on the device. The impact of neuron “death” (disabled neuron …

Boost Converter Inductor Sizing Effects On The Performance Of Mppt Algorithms, Alan Nonaka

Master's Theses

With solar power and other renewables set to take over the market in the coming decades, maximum power point tracking will be essential to optimizing power output. One underserved topic of research is the effect of inductor current ripple on performance of Maximum Power Point Tracking (MPPT) algorithms. Many new topologies are focused on decreasing the ripple from PV source to increase efficiency and power output. However, not much has been done to show ripple degrading performance of MPPT algorithms. This study uses a boost converter topology to test the performance of constant duty cycle step Perturb and Observe (PO), …

A Novel Path Loss Forecast Model To Support Digital Twins For High Frequency Communications Networks, James Marvin Taylor Jr.

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

The need for long-distance High Frequency (HF) communications in the 3-30 MHz frequency range seemed to diminish at the end of the 20th century with the advent of space-based communications and the spread of fiber optic-connected digital networks. Renewed interest in HF has emerged as an enabler for operations in austere locations and for its ability to serve as a redundant link when space-based and terrestrial communication channels fail. Communications system designers can create a “digital twin” system to explore the operational advantages and constraints of the new capability. Existing wireless channel models can adequately simulate communication channel conditions with …

A Machine Learning Approach To Delineating Neighborhoods From Geocoded Appraisal Data, Rao Hamza Ali, Josh Graves, Stanley Wu, Jenny Lee, Erik Linstead

Engineering Faculty Articles and Research

Identification of neighborhoods is an important, financially-driven topic in real estate. It is known that the real estate industry uses ZIP (postal) codes and Census tracts as a source of land demarcation to categorize properties with respect to their price. These demarcated boundaries are static and are inflexible to the shift in the real estate market and fail to represent its dynamics, such as in the case of an up-and-coming residential project. Delineated neighborhoods are also used in socioeconomic and demographic analyses where statistics are computed at a neighborhood level. Current practices of delineating neighborhoods have mostly ignored the information …

Artificial Intelligence Towards Future Industrial Opportunities And Challenges, Gizealew Dagnaw

African Conference on Information Systems and Technology

The industry 4.0 will bring reflective changes to our society, including an important digital shift in the manufacturing sector. At present, several manufacturing firms are trying to adopt the practices of industry 4.0 throughout their supply chain. The Fourth Industrial Revolution and the artificial intelligence at its core are fundamentally changing the way we live, work and interact as citizens. The complexity of this transformation may look overwhelming and to many threatening. Recently, the dramatic growth of new generation information technologies has prompted several countries to seek new strategies for industrial revolution. The globalization and the competitiveness are forcing companies …

Interdisciplinary Education Outreach With Traffic Sensor Build Kits, Sarah V. Hernandez, Mariah B. Crews

Civil Engineering Teaching and Learning

The goal of this project was to attract K-12 students to transportation engineering careers through STEM outreach programs. To accomplish this goal, the object of the project was to design and implement maritime freight oriented educational outreach activities centered on traffic sensing technologies for middle, high school, and first-year college students. In MarTREC Project 5011 (Evaluating the Performance of Intermodal Connectors), the research team designed a low-cost, easily implementable LiDAR and Bluetooth sensor bundle that was capable of detecting, characterizing, and tracking freight trucks as they traveled to and from inland waterway port areas. The sensor provided data necessary to …

Vector Magneto-Optical Generalized Ellipsometry On Magnetic Slanted Columnar Heterostructured Thin Films, Chad Briley

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Modern material growth techniques allow for nano-engineering highly complex three dimensionally nanostructured materials. These nano-engineered materials possess highly anisotropic physical properties that are significantly different from that of their bulk counterparts. The magnetization properties of nano-engineered materials can be modified through a close range interaction known as magnetic exchange. These materials are referred to as magnetic exchange-coupled materials. Exchange-coupled magnetic materials are composite magnetic materials where the magnetization of one material is influenced by the magnetization state of the neighboring materials.

The author describes the creation of a representative sample set of exchange-coupled nanoengineered magnetic materials. These materials are created …

Automated Drone Calibration System, Jackie Kelly Jong-Mee Paik, Zach Nathan Richter, Tyler Wilson Van Den Berg, Ryan Alexander Zhan, Matthew Ward Carlson

Mechanical Engineering

The final design review of the Inspired Flight Calibration Team senior project will detail the process used to complete a verification prototype of a drone calibration device and discuss lessons learned and suggestions for improving this device. Going from brainstorming and conceptual prototyping all the way through verification prototyping and testing, we were able to design a gyroscopic device that met Inspired Flight’s needs for the flight sensor calibration of their drones. The mechanical design involved comprehensive CAD models and hands-on manufacturing. The mechatronics side of the project worked heavily with electrical wiring and writing custom software to communicate and …

Hvac Fan Control Using Modicon M580, Anthony Tyler, Kevin Shipp

Electrical Engineering

This project is the start of a lab experiment for the Cal Poly San Luis Obispo Electrical Engineering department’s new lab focusing on Programmable Logic Controller's (PLCs). The primary focus is to create a lab where students control a Heating, Ventilation, and Air conditioning (HVAC) system controlled by the Modicon M580 PLC, donated by Schneider Electric. The experiment contains a heat source, which the PLC monitors with a temperature sensor, and a cooling source with multiple fans. Students will learn to use function block diagrams to program the PLC, controlling fan output and regulating the system temperature. The experiment specifications …

Pulsed Electric Field System Development For Algae Biofuel Extraction, Juan David Gonzalez Aguayo, Aspyn Bessler

Electrical Engineering

The search for sustainable alternatives to fossil fuels proves necessary due to the effects fossil fuels have on Earth’s environment. These alternatives must have a minimum ecological footprint and cause no long-term harm to the environment. An environmentally friendly fuel is necessary to usher in a generation of renewable green energy.

The production of algae refined biofuels becomes a possible solution to this growing issue. Algae absorb CO2from the atmosphere during their reproduction and growth cycles, yielding a positive environmental impact. As the biofuel is refined and becomes suitable for use, the combustion of the finished fuel generates an equal …