Other Electrical and Computer Engineering Commons^™

Polysaber: A Custom Reactive Lightsaber Soundboard, Pedro B. Medeiros

Computer Engineering

The PolySaber project was developed as a custom reactive lightsaber control system built as a fully custom PCB design. The purpose of the project was to create a lower-cost and more customizable alternative to commercially available lightsaber soundboards while simultaneously providing hands-on experience in PCB design, embedded systems development, and hardware integration. Commercial lightsaber soundboards are expensive, proprietary, and difficult for hobbyists to customize. The PolySaber project addresses this by creating a modifiable hardware platform built around the ESP32 microcontroller. The system supports programmable firmware, RGB NeoPixel blade control, motion sensing, reactive swing and clash effects, onboard audio amplification, and …

A Low-Cost Motion Classification System For A Stuffed Animal Using An Imu And Machine Learning, Rachel N. Guynes

Honors Theses

One of the many fields that has seen the integration of robots is therapy. Zoomorphic robots (ZR) are designed to look and behave like animals to assist in Animal Assisted Therapy (AAT) practices. Studies show that ZRs can provide benefits similar to working with an actual animal; however, their high cost limits their accessibility. This thesis documents the process of building a real-time, low-cost motion classification system that can be attached to a stuffed animal to make it more interactive. Using a Random Forest (RF) classifier, the system identifies movements with approximately 81.67% accuracy.

Proxyconnec: A Lora-Based Proactive Safety Communication System For Off-Grid Environments, Shruti Bhandari, Roza Shaimurat

ATU Scholars Symposium

Remote environments lacking cellular or satellite coverage present significant safety challenges. ProxyConnec was developed as a point-to-point communication system using ESP32 microcontrollers and REYAX RYLR998 LoRa modules to provide off-grid monitoring.

The system implements a proactive heartbeat model in which a beacon device transmits a signal every 1,000 milliseconds. A base station monitors this connection using a 5,000 millisecond watchdog timer. If communication is interrupted, the system immediately triggers audible and visual alerts. Unlike conventional tracking devices that depend on manual SOS activation, this design treats unexpected signal loss as a potential safety event.

The manufacturer rates the selected LoRa …

Design Considerations Of A Gpu, Nicholas M. Devilliers

Electrical Engineering and Computer Science Undergraduate Honors Theses

With the current era of AI technology, the era of single instruction multiple data has become an increasingly viable solution to accelerate training. The problem is that while software to use GPUs and other hardware accelerators, designing GPUs and ASIC devices has become increasingly more expensive and there aren’t great examples of generic GPUs that anyone can use and modify. In this thesis, there are four design considerations that will be discussed and how they affect the result of a generic GPU. The four considerations that were talked about in the thesis are, word width, arithmetic type, number of stages, …

Automated Solutions For Hydroponic Plant Growth, Sydney Mcclure, Adam Lachguar

Sustainability Conference

Within the past year, Project H.O.M.E. has been focusing on the design and development of a semi-automatic hydroponic system specifically for sustaining plant life in Martian-like conditions. Given the significance of extended space-based travel, where the duration of human life in space is a crucial factor, growing food becomes imperative. This project has integrated electrical engineering and computer science, with features like automated pH testing and sensor-based evaluations. Key functionalities, including timed watering and automatic adjustments, were coded to enhance plant care. Initially, the project’s comprehensive research and strategic planning resulted in detailed blueprints and computer-aided design models for the …

Hypoxic Incubator: Improving Robustness/Reliability And Demonstrating Physiological Efficacy, Damon Dennis Tan

Master's Theses

The Microphysiological Systems Laboratory aims to develop colorectal cancer tumor models under a hypoxic environment to assess model response to pharmaceutical compounds in vitro. To perform relevant studies, researchers have attempted to use different hypoxic inducing strategies such as a nitrogen pod and hypoxic incubator to recreate in vivo physiological responses to hypoxia. However, studies would be interrupted due to incubator functionality failure. To ensure successful and physiologically relevant studies, I improved and verified the robustness and reliability of a hypoxic incubator previously designed and manufactured in the lab. Through the testing and iterating design processes, I engineered and implemented …

Low-Power, Event-Driven System On A Chip For Charge Pulse Processing Applications, Joseph A. Schmitz

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

This dissertation presents an electronic architecture and methodology capable of processing charge pulses generated by a range of sensors, including radiation detectors and tactile synthetic skin. These sensors output a charge signal proportional to the input stimulus, which is processed electronically in both the analog and digital domains. The presented work implements this functionality using an event-driven methodology, which greatly reduces power consumption compared to standard implementations. This enables new application areas that require a long operating time or compact physical dimensions, which would not otherwise be possible. The architecture is designed, fabricated, and tested in the aforementioned applications to …

Improving Cellphone-Based Bio-Imaging Technique For Fluorescence Detection, Erteza T. Efaz

LSU Master's Theses

The research presented in this thesis focuses on the design, development, and evaluation of a fluorescence detection system. The system is implemented primarily as an Android application, Auto Camera, which leverages smartphone cameras to capture and analyze fluorescent images. The application provides a user-friendly interface with some configurable features like exposure time, ISO speed, and storage limit; as well as defining detection thresholds and setting acquisition intervals. This study begins with the architectural framework of the Android application, which is written in Java using Android Studio. The API compatibility is set to version 33, and users are prompted to grant …

Wireless Kick Pedal, Jacob Wise, Ryan Kinyo, Bradley Toth, Ian Zanath

Williams Honors College, Honors Research Projects

The goal of the project is to build a wireless kick pedal that allows accessibility to drummers that have leg or foot disabilities and add versatility to multi-instrumentalists looking to add percussion while playing another instrument. The proposed pedal is designed in two main parts, a wearable band that tracks the player’s movement, and a hammer mechanism that receives actuation commands from the wearable band to move the hammer and deliver a drumbeat. The band is designed to be worn on several parts of the body, including the ankle, knee, thigh, or even the arm depending on the user’s situation. …

Low Power Multi-Channel Interface For Charge Based Tactile Sensors, Samuel Hansen

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Analog front end electronics are designed in 65 nm CMOS technology to process charge pulses arriving from a tactile sensor array. This is accomplished through the use of charge sensitive amplifiers and discrete time filters with tunable clock signals located in each of the analog front ends. Sensors were emulated using Gaussian pulses during simulation. The digital side of the system uses SAR (successive approximation register) ADCs for sampling of the processed sensor signals.

Adviser: Sina Balkır

Development Of The Subwave Rov And Neural-Inertial Positioning System, Jason Farmer

Theses and Dissertations

This report documents the development of the Subwave, a remotely-operated underwater vehicle (ROV), and an artificial neural network based inertial positioning system. The Subwave uses the open-source ArduSub software framework, commercial-off-the-shelf hardware components, and several custom systems. It is designed as a platform for researching autonomous underwater vehicles (AUVs). The first step for an AUV is navigating waypoints, which requires the AUV to know its global position. Since global navigation satellite systems (GNSSs) are denied underwater, the available underwater positioning systems were surveyed and determined that all the available systems were too large and expensive for the Subwave. It was …

Mars Prototype Rover Environmental Measurement System, James A. Renick

Computer Engineering

In my senior project, the problem I am trying to solve is how to efficiently design, create, and install an original library onto a Mars prototype rover operating system and to further use that library to integrate a new weather measurement sensor device into the rover system with the necessary software and hardware implementations. This is an important and highly valued problem as many aerospace and other engineering companies utilize rovers and other autonomous systems for important research, explorations, and reconnaissance missions and goals. In solving this problem, I utilized many resources that were available to me such as advisors, …

Smartphone Control Of Rc Cars, Weston R. Fitzgerald

Electrical Engineering

The smartphone-controlled RC (remote-controlled) car is an inexpensive remote-controlled car designed to be fast and portable. Instead of manufacturing, packaging, and shipping a separate controller, the remote control is implemented in a phone application, which saves time and money in both the design process and the manufacturing process. Utilizing the user’s smartphone is more cost-effective since mobile devices are a common recurrence, and packaging fewer devices results in overall better portability of the product.

This smartphone-controlled car is speedy and intuitive to learn for typical smartphone users. The user can change the car’s speed and direction wirelessly using their phone; …

Combat Robot, Wayne Lambert, Elijah Harris, Brian Eiseman, Jordan Meyer

ONU Student Research Colloquium

The senior capstone project that was tasked to the team was the decision of choosing a challenge within a national robotics competition. The group decided to compete at the National Robotics Challenge in Marion, Ohio. The idea was to participate in the combat robot competition at this NRC event. Once this decision had been made the next steps were to get an idea of what the rules and requirements of the competition were and to try and to sketch a very rough drawing of what the ideal robot should look like. From there it was decided to start a timeline …

Solar Photovoltaic Performance Monitoring: A Bibliometric Review, Research Gaps And Opportunities, Javed Sayyad, Paresh Nasikkar

Library Philosophy and Practice (e-journal)

Electrical power generation has been revolutionized by growing demand and use of Renewable Energy (RE) sources such as Solar Photovoltaic (SPV) as the main electricity source in modern times. The main objective of this bibliometric analysis is to understand the scope of the literature available for SPV performance characterization. This detailed reviewed was performed on the documents related to SPV research considering all the subject categories from Scopus and Web of Science (WoS) databases. The patterns for the particular set of keywords were broke down with the recuperated outcomes from Scopus database in the language, publication type, year of publication, …

A 2.56 Gbps Serial Wireline Transceiver That Supports An Auxiliary Channel And A Hybrid Line Driver To Compensate Large Channel Loss, Xiaoran Wang

Electrical Engineering Theses and Dissertations

Serial transceiver links are widely used for high-speed point-to-point communications. This dissertation describes two transceiver link designs for two different applications.

In serial wireline communications, security is an increasingly important factor to concern. Securing an information processing system at the application and system software layers is regarded as a necessary but incomplete defense against the cyber security threats. In this dissertation, an asynchronous serial transceiver that is capable of transmitting and receiving an auxiliary data stream concurrently with the primary data stream is described. The transceiver instantiates the auxiliary data stream by modulating the phase of the primary data without …

Polyone Smartphone, Joshua Zalmanowitz, Chi Nguyen, Gerome Cacho, Chris Lim

Electrical Engineering

The Poly One Smartphone is a student designed smartphone built to explore the implementation of 5G, provide a hardware solution to ensure personal information security and privacy, and provide longer battery life. The key features of this smartphone include but are not limited to a main cpu, some form of network connectivity in the form of Wi-fi or Cellular Data, calling functionality, a rechargeable battery that works with common power connection protocols, and compatibility with popular applications.

Heuristic-Based Threat Analysis Of Register-Transfer-Level Hardware Designs, Wesley Layton Ellington

Electrical Engineering Theses and Dissertations

The development of globalized semiconductor manufacturing processes and supply chains has lead to an increased interest in hardware security as new types of hardware based attacks, called hardware Trojans, are being observed in industrial and military electronics. To combat this, a technique was developed to help analyze hardware designs at the register-transfer-level (RTL) and locate points of interest within a design that might be vulnerable to attack. This method aims to eventually enable the creation of an end-to-end design hardening solution that analyzes existing designs and suggests countermeasures for potential Trojan attacks. The method presented in this work uses a …

E-Z Door: Hands-Free Front Door Unlocking And Opening Mechanism, Caleb Dyck

Williams Honors College, Honors Research Projects

The E-Z Door Senior Design project is a project with the aim of designing a hands-free system to unlock and open the front door of a home using two-factor security authentication.

The main goal of this project is to help people who may have physical limitations to be able to take advantage of recent technology, making it significantly easier to enter their homes.

Asic Design To Support Low Power High Voltage Power Supply For Radiation Monitoring Applications, Daniel Rogge

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

A low power high voltage power supply is designed for use in a long duration radiation monitoring system. The supply employs a flexible pulse frequency modulation switching controller implemented in a 0.35 $\mu$m CMOS technology. The controller drives and regulates a flyback transformer driven 12-stage Cockroft-Walton voltage multiplier chain. The chain provides bias for the dynodes of a photomultiplier tube. The supply voltage is selectable via a 12-bit on-chip digital to analog converter. The system is designed for low power operation and immunity to supply voltage variation as the application is battery-powered.

Advisors: Sina Balkir and Michael W. Hoffman

Investigating The Effect Of Detecting And Mitigating A Ring Oscillator-Based Hardware Trojan, Lakshmi Ramakrishnan

Electrical Engineering Theses and Dissertations

The outsourcing of the manufacturing process of integrated circuits to fabrications plants all over the world has exposed these chips to several security threats, especially at the hardware level. There have been instances of malicious circuitry, such as backdoors, being added to circuits without the knowledge of the chip designers or vendors. Such threats could be immensely powerful and dangerous against confidentiality, among other vulnerabilities.

Defense mechanisms against such attacks have been probed and defense techniques have been developed. But with the passage of time, attack techniques have improved immensely as well. From directly observing the inputs or outputs, adversaries …

Cmos Radioactive Isotope Identification With Multichannel Analyzer And Embedded Neural Network, Samuel Murray

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

A radiation detection and identification system is designed and implemented to perform gamma ray spectroscopy on radioactive sources and identify which isotopes are present in the sources. A multichannel analyzer is implemented on an ASIC to process the signal produced from gamma rays detected by a scintillator and photomultiplier tube and to quantize the gamma ray energies to build a histogram. A fast, low memory embedded neural network is implemented on a microcontroller ASIC to identify the isotopes present in the gamma ray histogram produced by the multichannel analyzer in real time.

Advisors: Sina Balkir and Michael W. Hoffman

Portable High-Definition Audio Spectrum Analyzer, Alex Zahn, Jamie Corr

Electrical Engineering

The Portable High-definition Audio Spectrum Analyzer (PHASA) allows the user to visualize the audio frequency spectrum of an incoming line-level stereo audio signal. Upon pressing the touch screen spectrum graph, the PHASA displays the corresponding frequency and volume levels as well as crosshairs at the touched location. The PHASA features multiple left/right channel display modes— Left channel only, right channel only, both channels simultaneously, and the average between the two channels. The PHASA features multiple resolution display modes (standard-resolution and high-resolution) and multiple dynamics display modes (standard dynamics, averaging, and peak/hold). The PHASA accepts input audio via a 1/4" TRS …

Design And Simulation Of An 8-Bit Successive Approximation Register Charge-Redistribution Analog-To-Digital Converter, Sumit K. Verma

Electrical Engineering Theses

The thesis initially investigates the history of the monolithic ADCs. The next chapter explores the different types of ADCs available in the market today. Next, the operation of a 4-bit SAR ADC has been studied. Based on this analysis, an 8-bit charge-redistribution SAR ADC has been designed and simulated with Multisim (National Instruments, Austin, TX). The design is divided into different blocks which are individually implemented and tested. Level-1 SPICE MOSFET models representative of 5μm devices were used wherever individual MOSFETs were used in the design. Finally, the power dissipation during the conversion period was also estimated. The supply voltage …

An Exact Analysis For Four-Order Acousto-Optic Bragg Diffraction Which Incorporates Both Incident Light Angle And Sound Frequency Dependencies, Adeyinka Sunday Ademola

Electrical Engineering Theses

This thesis extends the prior work which produced an exact solution to the four-order acousto-optic (AO) Bragg cell with assumed fixed center frequency and with exact Bragg angle incident light. The extension predicts the model that incorporates the dependencies of both the input angle of light and the sound frequency. Specifically, a generalized 4^th order linear differential equation (DE), is developed from a simultaneous analysis of four coupled AO system of DEs. Through standard methods, the characteristic roots, which requires solving a quartic equation, is produced. Subsequently, a derived system of homogeneous solutions, which absorbs the roots obtained using …

Implementation Of Range Autofocus For Sar Radar Imaging, Nicholas J. Testin, Philip Davis

KSU Journey Honors College Capstones and Theses

The range calculation for an FMCW radar depends on accurate linear modulation. In some circumstances, linear modulation may not be available and must be corrected for. This paper describes an autofocus technique used to correct for phase error due to non-linearities in the components of a FMCW radar. Also described here is the algorithm used in calculating the phase error and application of the phase correction with triangle modulation. Known errors were calculated at certain distances and applied to correcting the phase of data taken at similar distances. The results given were generated using a SAR working outside linear ranges.

Substrate Integrated E-Plane Horn Antenna And Antenna Array, Zhewei Gu

All Graduate Theses, Dissertations, and Other Capstone Projects

In this paper, a novel SMA fed substrate integrated E-plane horn antenna and antenna array are proposed. The substrate integrated E-plane waveguide (SIEW) is not only able to integrate conventional waveguide circuits on printed circuit boards (PCB), but also especially falls into all E-plane circuits which substrate integrated waveguide (SIW) technique fails to. Essential copper strips are sandwiched in the middle by two PCBs to support longitudinal current in the E-plane fed through an SIEW-to-SMA transition. Copper plated holes aligned along the wave propagation direction are drilled through the substrate and copper strips, so that vertical current in the H-plane …

Data Logging System For A Synthetic Aperture Radar Unit, Nicholas J. Testin, Philip Davis, Ian Dorell, Alexander Gillespie

KSU Journey Honors College Capstones and Theses

A small, existing radar unit lacked the ability to automatically store the data it was receiving, which made its use clunky and cumbersome. A system was constructed to allow an on-board microprocessor to track distance traveled, and automatically store the data output from the radar unit to a portable memory unit for later data processing. Distance traveled is determined using a specially designed mobile cart, which electronically converts the rotation of a wheel into an electrical signal while also providing stability for taking accurate radar measurements. The output data from the radar unit is stored as a properly-formatted sound file …

Cal Poly Supermileage Electronic Fuel Injection, Alexander Pink

Electrical Engineering

Cal Poly Supermileage is a student-run engineering club that builds prototype gasoline vehicles optimized maximum fuel-efficiency. To power their vehicles, the Supermileage team makes use of single-cylinder, 4-stroke, electronically fuel-injected (EFI) gasoline engines. This report details the development, iterative design & test cycles, and integration of an EFI system for the Supermileage club. This project develops an EFI system that interfaces to the most common types of sensors found in the low-power Supermileage-range of engines, including throttle-position sensors, manifold absolute pressure sensors, gear-tooth hall-effect sensors, variable-reluctance position sensors, engine coolant temperature sensors, intake air temperature sensors, and exhaust oxygen sensors. …

Oceanographic Instrument Simulator, Amy Chen

Master's Theses

The Monterey Bay Aquarium Research Institute (MBARI) established the Free Ocean Carbon Enrichment (FOCE) experiment to study the long-term effects of decreased ocean pH levels by developing in-situ platforms [1]. Deep FOCE (dpFOCE) was the first platform, which was deployed in 950 meters of water in Monterey Bay. After the conclusion of dpFOCE, MBARI developed an open source shallow water FOCE (swFOCE) platform located at around 250 meter of water to facilitate worldwide shallow water experiments on FOCE [1][2]. A shallow water platform can be more ubiquitous than a deep-water platform as shallow water instruments are less expensive (as it …