Electrical and Electronics Commons^™

Small-Scale Analog Spiking Neural Network: Design And Simulation Of An Analog Deep Neural Network, Lucas Hogue

Electrical Engineering and Computer Science Undergraduate Honors Theses

A small-scale analog schematic of a spiking neural network (SNN) is designed and demonstrated through the analog design environment (ADE) within Cadence Virtuoso. An SNN is a type of neuromorphic system that utilizes components mimicking the function of the neurons and synapses found in biological neural networks. The SNN designed in this project is composed of four layers: one input layer, two hidden layers, and one output layer. The inclusion of more than one hidden layer classifies the network as “deep” and increases the network’s efficiency at handling data with increased complexity. The SNN categorizes inputs by producing a set …

Control And Stability Analysis Of Three-Phase Grid-Connected Inverters In Renewable Energy Systems, Yasser Ayeva

Electrical Engineering and Computer Science Faculty Publications and Presentations

The increase in demand for renewable energy sources such as solar and wind systems has led to widespread use and integration of a three-phase grid connected inverters in electric modern electric power systems. The inverters are essential to convert DC power into AC power and to control the delivered power to the grid. However, the use of the inverters in a renewable energy system has some challenges related to stability and control due to the presence of power electronic interfaces and filter dynamics. This paper analyzes the control and stability of three phase grid connected inverter through an LCL filter. …

Implementation Of A Three-Port Solar Converter With A Battery Energy Storage System, Maison Christopher Phipps

Graduate Theses and Dissertations

The increasing deployment of distributed solar and energy storage systems has created the need for integrated power converters that can efficiently manage photovoltaic (PV) generation, battery energy storage, and grid-tied AC output. This thesis presents the implementation and validation of a 5kW non-isolated Three-Port Converter (TPC) adapted for residential solar applications. The converter consolidates three power stage into a high-frequency, compact architecture: a unidirectional boost converter for PV input, a bidirectional interleaved buck-boost converter for battery energy storage, and a configurable DC/AC inverter for 120Vac single-phase output. The system is controlled using a central controller implemented on a TI C2000™ …

Optical Characterization Of Ge And Gesn Grown In Aspect Ratio Trapping Structures For Enhanced Emitter Performance, Abdulla Said Ali

Graduate Theses and Dissertations

Silicon (Si) began dominating the electronics industry since 1960s, the dominance came due to its affordability and well developed fabrication processes. But when it comes to light emitting devices and photonics devices in general, the indirect bandgap of Si has caused many scientists to search for alternative semiconductor materials that can deliver better light emission, materials that can also improve wavelengths detection which is also very limited when it comes to Si, reduce losses and greater light amplification, all this while still being affordable. Despite these limitations, Si has been widely used in Complementary Metal Oxide Semiconductor (CMOS) manufacturing and …

Optimal & Robust Control Of A Bidirectional Dc-Dc Converter In Ev Systems, Yasser Ayeva

Electrical Engineering and Computer Science Faculty Publications and Presentations

This paper analyzes the performance of PI, LQR, and H∞ controllers for the regulation of a bidirectional buck boost converter in electric vehicle systems. To get the system state space equations, a continuous conduction average model is linearized. For analysis a PI controller will be used as baseline, the LQR controller will be used to improve transient response, and the H∞ controller will be used for the system robustness and disturbance rejection. The simulation results show that the advanced controllers surpass the PI controller in terms of overshoot, settling time, and voltage ripple, with the H∞ controller offering the best …

Series Resonant Converters With Medium Voltage Sic Mosfets For Electric Aircraft Applications, Xinyuan Du

Graduate Theses and Dissertations

To develop high-performance high- power-density MV power converters, the emerging silicon carbide (SiC) devices are more attractive than their silicon (Si) counterparts, since the fast switch frequency brought by the SiC can effectively reduce the volume and weight of the filter components and thus increase the converter power density. From the converter topology perspective, with the MV dc distribution, the single stage isolated dc/dc converter are suitable for next-generation electric aircraft system due to soft switching and high power density. In this work, comprehensive static and dynamic characterizations were conducted for the latest 6.5 kV silicon carbide (SiC) MOSFETs from …

Design And Validation Of A High-Frequency Multi-Output Dc-Dc Converter For Radar Power Applications, Tory Sutton

Graduate Theses and Dissertations

Modern radar systems and advanced electronics demand compact, efficient, and reliable power solutions capable of delivering multiple tightly regulated voltage rails under strict size, weight, power, and reliability (SWaP-R) constraints. This thesis presents the design, implementation, and validation of a high-frequency (460 kHz – 1 MHz), multi-output DC-DC converter for a mission?critical radar platform, addressing both integration and performance requirements. The first implementation, an isolated modular converter (IMC), utilizes isolated silicon?based DC-DC modules to deliver twelve isolated voltage outputs from a single input. This approach provided robust electrical isolation, simplified system integration, and minimized design risk, making it well-suited for …

Design, Simulation, And Testing Of Planar Transformer For Smart Green Power Node (Sgpn) Isolation Using Ansys, Brooke Scott

Electrical Engineering and Computer Science Undergraduate Honors Theses

The goal of this project was to design and simulate a small, high-frequency, planar, ferrite-core transformer which can be used in a variety of applications, the most relevant of which is photovoltaic (PV) converter systems, which often require bulky transformers to function properly. The current research involved several processes: (1) Understanding and designing a tutorial for the use of Ansys software to aid in the efficient development and modeling of transformers, (2) designing and simulating a planar transformer in Ansys to be used in a solar converter, specifically the Smart Green Power Node (SGPN), and (3) testing the planar transformer …

Validating An Electronics Cooler Experiment And Optimizing Its Performance Using Ansys Icepak, Daniel V. Curl

Mechanical Engineering Undergraduate Honors Theses

Researchers at the University of Arkansas' Mechanical and Electrical Engineering Research Departments have designed and built a cold plate and substrate design for a 10 kV SiC MOSFET power module. Many variables define the design of the cold plate and substrate system and have quantifiable effects on the device’s performance. These variables include but are not limited to geometry and material selection of the fins and substrate. Manufacturing many test designs, running experiments, and comparing their performance is a time-consuming and expensive design optimization method that may be effective for some low-cost applications. Still, simulation is often a more cost-effective …

Leveraging P4 Programmable-Hardware Switches For In-Network Pmu Packet Recovery, Evan Michael Bonar

Electrical Engineering and Computer Science Undergraduate Honors Theses

Phasor Measurement Unit (PMU) systems are essential for real-time power grid monitor- ing but often face data loss due to network delays, equipment malfunctions, or transmis- sion errors. Traditional centralized recovery solutions introduce significant latency and scalability challenges. This thesis presents a P4-based in-network recovery mechanism that embeds detection and recovery directly into the data plane of P4-enabled programmable switches, significantly reducing recovery time and infrastructure complexity. Using the Aurora 610 switch, the system detects missing packets via sequence number analysis and recovers magnitudes with an efficient register-based algorithm.

Evaluation demonstrates high accuracy and low latency, achieving a mean absolute …

Two-Dimensional Quantum Material Identification Via Self-Attention And Soft-Labeling In Deep Learning, Xuan Bac Nguyen, Apoorva Bisht, Benjamin Thompson, Hugh O.H. Churchill, Khoa Luu, Samee U. Khan

Electrical Engineering and Computer Science Faculty Publications and Presentations

Detecting two-dimensional (2D) materials in silicon chips presents a significant challenge in the field of quantum machines due to the difficulty of data collection. Specifically, among thousands of flakes, not all flakes are useful or well-annotated, resulting in noisy and hard samples within the dataset, which challenges the deep neural network (DNN) to learn. To address this problem, we propose a novel method for identifying quantum 2D flakes even when there is a high rate of missing annotations in the input images. In particular, we first propose a new mechanism for automatically detecting false negative flakes that are missing annotations. …

Synthesis Of Nanoparticles And Their Applications In Power Module Packaging And Organic Electronics, Xinsong Zhang

Graduate Theses and Dissertations

Nanoparticles can greatly change the properties of regular materials due to their special structures. In this research nanoparticles, such as silver nanowires, silver nanospheres and expanded graphite, are used in interconnection materials for power module packaging, and in conductive films for organic electronics. Silver nanowires synthesized by polyol synthesis, are used as fillers in micron silver paste. The electrical and mechanical properties of the sintered hybrid silver paste are investigated and compared with those of micron silver paste. The composites of silver nanospheres and expanded graphite are mixed with PEDOT:PSS solutions in 5 different weight ratio. The electrical and optical …

Ω-Shaped Rogowski Coil Current Sensor Optimization Design In Power Electronics Applications, Xia Du

Graduate Theses and Dissertations

Accurate switching current measurement plays a pivotal role in characterization of power devices, overcurrent protection, and real-time control of system-level operations in power electronics applications. However, the ongoing revolution in power electronics, driven by the emergence of wide bandgap power devices operating at megahertz (MHz) switching frequencies, introduces challenges for current sensor design. The urgent issue now is the need to increase current sensor bandwidth significantly to adeptly capture the rapid switching speed current. Additionally, the trend towards high power density and compact power converters in various applications demands current sensors that are not only compact and nonintrusive but can …

Hatt-Flow: Hierarchical Attention-Flow Mechanism For Group-Activity Scene Graph Generation In Videos, Naga Venkata Sai Raviteja Chappa, Pha Nguyen, Thi Hoang Ngan Le, Page Daniel Dobbs, Khoa Luu

Electrical Engineering and Computer Science Faculty Publications and Presentations

Group-activity scene graph (GASG) generation is a challenging task in computer vision, aiming to anticipate and describe relationships between subjects and objects in video sequences. Traditional video scene graph generation (VidSGG) methods focus on retrospective analysis, limiting their predictive capabilities. To enrich the scene-understanding capabilities, we introduced a GASG dataset extending the JRDB dataset with nuanced annotations involving appearance, interaction, position, relationship, and situation attributes. This work also introduces an innovative approach, a Hierarchical Attention–Flow (HAtt-Flow) mechanism, rooted in flow network theory to enhance GASG performance. Flow–attention incorporates flow conservation principles, fostering competition …

Low Noise Amplifier For 5ghz Wi-Fi Applications On 22nm, Harshdeep Singh

Electrical Engineering Undergraduate Honors Theses

More devices than ever are being used to connect to the internet via Wi-Fi than ever before. This creates the demand for improving Wi-Fi standards and wireless transceivers. On of the most important stages of a Wi-Fi receiver is the low noise amplifier (LNA), this is because it is the very first stage after the antenna receives the signal. The LNA is responsible for boasting the incoming signal while adding a low amount of noise to boast the signal enough to make it receptible to the rest of the receiver system. This study sought to design an inductively degenerated common …

Challenges For Room Temperature Operation Of Electrically Pumped Gesn Lasers, A. R. Ellis, D. A. Duffy, I. P. Marko, S. Acharya, W. Du, S. Q-. Yu, S. J. Sweeney

Electrical Engineering and Computer Science Faculty Publications and Presentations

Recent demonstrations of room-temperature lasing in optically pumped GeSn show promise for future CMOS compatible lasers for Si-photonics applications. However, challenges remain for electrically pumped devices. Investigation of the processes that limit device performance is therefore vital in aiding the production of future commercial devices. In this work, a combined experimental and modelling approach is utilised to explore the dominant loss processes in current devices. By manipulating the band structure of functioning devices using high hydrostatic pressure techniques at low temperature, the dominant carrier recombination pathways are identified. This reveals that 93 ± 5% of the threshold current is attributable …

Hierarchical Power Converter Physical Design, Tristan Mark Evans

Graduate Theses and Dissertations

The field of power electronics is undergoing rapid advancement that is driven by the need for further electrification in all aspects of power generation and transmission, transportation, and consumer goods. Recent advances in wide bandgap (WBG) semiconductor technologies continue to push their adoption in systems with higher power densities and conversion efficiencies. However, the way in which the components of these systems are designed has not kept pace with the rapidly evolving landscape of their applications and often requires costly, manual design iteration. Therefore, new methods are needed to improve this design process. Packaging of power devices is a critical …

Spin Disorder Control Of Topological Spin Texture, Hongrui Zhang, Yu-Tsun Shao, Xiang Chen, Binhua Zhang, Tianye Wang, Fanhao Meng, Kun Xu, Peter Meisenheimer, Xianzhe Chen, Xiaoxi Huang, Piush Behera, Sajid Husain, Tiancong Zhu, Hao Pan, Yanli Jia, Nick Settineri, Nathan Giles-Donovan, Zehao He, Andreas Scholl, Alpha N'Diaye, Padraic Shafer, Archana Raja, Changsong Xu, Lane W. Martin, Michael F. Crommie, Jie Yao, Ziqiang Qiu, Arun Majumdar, Laurent Bellaiche, David A. Muller, Robert J. Birgeneau, Ramamoorthy Ramesh

Physics Faculty Publications and Presentations

Stabilization of topological spin textures in layered magnets has the potential to drive the development of advanced low-dimensional spintronics devices. However, achieving reliable and flexible manipulation of the topological spin textures beyond skyrmion in a two-dimensional magnet system remains challenging. Here, we demonstrate the introduction of magnetic iron atoms between the van der Waals gap of a layered magnet, Fe₃GaTe₂, to modify local anisotropic magnetic interactions. Consequently, we present direct observations of the order-disorder skyrmion lattices transition. In addition, non-trivial topological solitons, such as skyrmioniums and skyrmion bags, are realized at room temperature. Our work highlights …

High Performance Silicon Carbide Based Converters For Powertrain Electrification, Nan Lin

Graduate Theses and Dissertations

With the increasing concern towards environment protection, electric vehicles (EVs) and hybrid electric vehicles (HEVs) have become popular in recent years. They not only help reduce carbon emissions, but also come with other benefits such higher efficiency and better user experience. Many countries and vehicle manufactures have made their plans to keep up with this trend in vehicle electrification. Powertrain is an assembly of components in a vehicle that pushes it forward. As for EVs and HEVs, their powertrains are composed of one or more power electronics converters, which are significant to the system. Silicon carbide MOSFETs have shown superior …

The National Center For Reliable Electric Power Transmission Test Facility, Anna Corbitt, Wesley G. Schwartz, Chris Farnell, Juan Carlos Balda, H. Alan Mantooth

Electrical Engineering and Computer Science Faculty Publications and Presentations

Globally, new technological solutions are being studied and developed by researchers in the field of power and energy systems. Before these solutions can be integrated into society as marketable products, thorough testing and validation of the design must be conducted. The National Center for Reliable Electric Power Transmission (NCREPT) is a unique high-power test facility located at the University of Arkansas, Fayetteville, AR, USA. NCREPT is a 12,000-square-foot laboratory space capable of testing power levels up to 6 MVA and offers testing at both the 480 V and 13.8 kV levels. NCREPT's capabilities expand outside of the scope of simply …

Modeling, Characterization, And Machine Learning Algorithm For Rectangular Choke Horn Antennas, Ibrahim N. Alquaydheb, Saleh A. Alfawaz, Amirreza Ghadimi Avval, Sara Ghayouraneh, Samir M. El-Ghazaly

Electrical Engineering and Computer Science Faculty Publications and Presentations

In this work, we present the design and modeling of a new type of choke horn antenna. It incorporates a rectangular waveguide and a rectangular choke acting as a parasitic element. The four-sided geometry of the antenna is applicable to systems that utilize rectangular waveguides. Also, it can overcome the need for rectangular-to-circular transition of transmission line or mode conversion. The main objective of this paper is to develop a model that calculates the far field radiation characteristics of the proposed antenna (analytical part) and to incorporate a finite element method (FEM) solver that adds to the theoretical solution (empirical …

Aggregation And Oligomerization Characterization Of Ss-Lactoglobulin Protein Using A Solid-State Nanopore Sensor, Mitu C. Acharjee, Brad Ledden, Brian Thomas, Xianglan He, Troy Messina, Jason Giurleo, David Talaga, Jiali Li

Physics Faculty Publications and Presentations

Protein aggregation is linked to many chronic and devastating neurodegenerative human diseases and is strongly associated with aging. This work demonstrates that protein aggregation and oligomerization can be evaluated by a solid-state nanopore method at the single molecule level. A silicon nitride nanopore sensor was used to characterize both the amyloidogenic and native-state oligomerization of a model protein ß-lactoglobulin variant A (βLGa). The findings from the nanopore measurements are validated against atomic force microscopy (AFM) and dynamic light scattering (DLS) data, comparing βLGa aggregation from the same samples at various stages. By calibrating with linear and circular dsDNA, this study …

Ism-Band Energy Harvesting Wireless Sensor Node, Fnu Naveed

Graduate Theses and Dissertations

In recent years, the interest in remote wireless sensor networks has grown significantly, particularly with the rapid advancements in Internet of Things (IoT) technology. These networks find diverse applications, from inventory tracking to environmental monitoring. In remote areas where grid access is unavailable, wireless sensors are commonly powered by batteries, which imposes a constraint on their lifespan. However, with the emergence of wireless energy harvesting technologies, there is a transformative potential in addressing the power challenges faced by these sensors. By harnessing energy from the surrounding environment, such as solar, thermal, vibrational, or RF sources, these sensors can potentially operate …

Chip- And System-Level Reliability On Sic-Based Power Modules, Pengyu Lai

Graduate Theses and Dissertations

The blocking voltage, switching frequency and temperature tolerance of power devices have been greatly improved due to the revolution of wide bandgap (WBG) materials, such as silicon carbide (SiC) and gallium nitride (GaN). Owing to the development of SiC-based power devices, the power rating, operating voltage, and power density of power modules have been significantly improved. However, the reliability of SiC-based power modules has not been fully explored yet. Thus, this dissertation focuses on the chip- and system-level reliability on SiC-based power modules. For chip-level reliability, this work focuses on on-chip SiC ESD protection devices for SiC-based integrated circuits (ICs). …

Design Of A Sigma-Delta Adc In 65nm Cmos Process, Michael Lee Thompson Iii

Electrical Engineering Undergraduate Honors Theses

Analog and digital signals both play a vital role in electrical engineering and the technology of today. As the role of electrical and computer engineers becomes more deeply involved in the development of new technology, an understanding of how these signals are utilized, and what they represent, is a necessity. Due to the inherent limitations involved with analog signals, there is a need for these signals to be accurately and efficiently converted to digital signals for processing. The job of the analog-to-digital converter, or ADC, is to receive this analog input signal (voltage or current) and create a digital representation …

Multiple Output Power Supply Using Toroidal Transformers For Medium Voltage Active Gate Drivers, Samhitha Venkata Machireddy

Graduate Theses and Dissertations

When operating in high power applications, power devices dissipate tens or hundreds of watts of power in the form of heat. The ability of the power devices to withstand power and dissipation of heat across the power devices becomes a prominent requirement in designing the power converter. This challenge demands a power converter design to be more effective and consistent which factors in size, cost, weight, power density and reliability. This study aims to propose a gate driver isolated power supply design that can be used in medium voltage applications (e.g., up to 10 kV) while respecting the principle of …

Stream Processor Development Using Multi-Threshold Null Convention Logic Asynchronous Design Methodology, Wassim Khalil

Graduate Theses and Dissertations

Decreasing transistor feature size has led to an increase in the number of transistors in integrated circuits (IC), allowing for the implementation of more complex logic. However, such logic also requires more complex clock tree synthesis (CTS) to avoid timing violations as the clock must reach many more gates over larger areas. Thus, timing analysis requires significantly more computing power and designer involvement than in the past. For these reasons, IC designers have been pushed to nix conventional synchronous (SYNC) architecture and explore novel methodologies such as asynchronous, self-timed architecture. This dissertation evaluates the nominal active energy, voltage-scaled active energy, …

A Nonlinear-Model-Based High-Bandwidth Current Sensor Design For Switching Current Measurement Of Wide Bandgap Devices, Xia Du, Liyang Du, Yuxiang Chen, Yuqui Wei, Andrea Stratta, H. Alan Mantooth

Electrical Engineering Faculty Publications and Presentations

With the growing adoption of wide bandgap devices in power electronic applications, current sensor design for switching current measurement has become more important. The demands for high accuracy, high bandwidth, low cost, compact size, and galvanic isolation pose significant design challenges. The conventional modeling approach for bandwidth analysis of current transformer sensors assumes that the magnetizing inductance remains constant, which does not always hold true in high-frequency operations. This can result in inaccurate bandwidth estimation and affect the overall performance of the current sensor. To address this limitation, this paper provides a comprehensive analysis of nonlinear modeling and bandwidth, considering …

Analysis Of An Isolated Bidirectional Ćuk Converter, Yeny Hau Chen

Graduate Theses and Dissertations

The objective of this thesis is to perform an analysis of the isolated bidirectional Ćuk dc-dc converter topology and demonstrate the advantages and operation of this configuration through simulations using MATLAB/SimulinkTM and measurements collected from a 1.5-kW prototype tested at the Engineering Research Center (ENRC) laboratory of the University of Arkansas. The idea of integrating an active-clamp snubber circuit on each side of the converter, proposed by Dr. Sudip Mazumder from the University of Illinois, Chicago, limits the additional voltage stresses on the components due to the energy from the transformer’s leakage inductance. This is studied in this thesis to …

Electrical Modeling For Dynamic Performance Prediction And Optimization Of Mcpms Layout, Quang Minh Le

Graduate Theses and Dissertations

In recent years, the fast development of Multichip Power Modules (MCPM) packaging and Wide Bandgap (WBG) technology has enabled higher voltage and current ratings, better thermal performance, lower parasitic parameters, and higher mechanical reliability. However, the design of the MCPM layout is a multidisciplinary problem leading to many time-consuming analyses and tedious design processes. Because of these challenges, the design automation tool for MCPM layout has become an emerging research area and gained much attention from the power electronics community. The two critical objectives of a design automation tool for MCPM layout are fast and accurate models for design insights …