Electrical and Electronics Commons^™

Developing A Collaborative Tool To Foster Communication In Sustainability Research, Nina Hunter, Noëlle-Laetitia Perret, Martin Klepal

Electrical & Electronic Engineering

Climate change necessitates urgent responses based on knowledge produced by teams that transcend disciplinary boundaries, and with members whose work focuses on the generation of knowledge and on the application of knowledge, with some integrating both. Almost a third of Europe’s building stock consists of heritage buildings requiring renovation that is ideally sustainable as part of an energy transition response. The European transdisciplinary CALECHE study team with use-cases in France, Italy, Sweden and Switzerland aims to support decision-making on the sustainable renovation of heritage buildings, via research that employs co-design. However, team members are from various disciplines, with different skillsets …

Advancing Industrial Participation In Demand Response Within National Electricity Grids Through Systematic Asset Selection, Risk Assessment And Modelling Approaches, Alexander Brem

Theses

Increasing the flexible capacity on national electricity grids will be key to maintain reliable control as the levels of renewables continue to increase annually. The industrial sector has been identified as being capable of contributing and potentially offering flexible capacities, following appropriate investigation. The aim of this thesis is to develop the knowledge, advance the engagement and encourage additional participation in national demand response programmes from the industrial sector to provide this flexibility. The potential within this sector, facilitated by the smart grid and demand response concepts is outlined, specifically detailing their benefits, driving factors and potential barriers as part …

Robust Control Strategies For Optimal Operation Of Distributed Generation In Smart Microgrids, Chi-Thang Phan-Tan

Theses

The high penetration of PV systems and fast communications networks increase the potential for PV inverters to support the stability and performance of smart grids and microgrids. PV inverters in the distribution network can work cooperatively and follow centralized and decentralized control commands to optimize energy production while meeting grid code requirements. However, there are older autonomous inverters that have already been installed and will operate in the same network as smart controllable ones. This research proposes a decentralized optimal control (DOC) that performs multi-objective optimization for a group of PV inverters in a network of existing residential loads and …

Model-Based Cognitive Communications For Low-Power Wireless Networks, Indika Sanjeewa Abeywickrama Dhanapala

Theses

Our world is increasingly being instrumented with low-power wireless networks that deliver data for diverse application domains such as energy management, health and well-being, security, and other Internet of Things services. As these wireless networks operate in the unlicensed radio spectrum while co-existing with various other communication networks, their communication reliability and energy efficiency are affected by the radio environment. Because of this vulnerability to radio interference, low-power wireless networks may be unable to deliver their application requirements and be inefficiently consuming energy, functioning as a low-dependability network. The situation is exacerbated in indoor environments such as office and residential …

Adaptive Uplink Data Rate Prediction And Networkselection In A Vehicular Mobile Channel, Georgi Nikolov

Theses

The rapid acceleration into the digital age brings a worldwide interconnectedness of an unprecedented level. This interconnectedness transforms the modern transportation network by linking its infrastructure components (e.g., signaling systems, traffic control systems, maintenance systems) together. Intelligent transportation systems (ITS) can utilize this newly emerged network infrastructure, improving traffic safety, traffic control, and reducing transportation-related environmental impacts, changing the way drivers, businesses and governments deal with road transport. It is expected that in the near future self-aware vehicles (e.g., trains, cars or trucks) will constitute the majority of the transportation infrastructure. Vehicles need to be able to reliably communicate critical …

Smart Inverters For Distributed Pv Network Management, Colin Charles Levis

Theses

Securing a sustainable decarbonised economy involves moving towards a decentralised power system with increasing penetration levels of distributed photovoltaics (PVs) within the low voltage distribution network (LVDN). Increasing penetration levels of PV systems pose challenges for maintaining grid voltage and frequency stability. Thus requires studies and simulations to estimate the needs and technical requirements to overcome the challenges and maximise the opportunities. These simulations require time-domain system models with a high dynamic resolution such as electromagnetic transient (EMT) simulations with small-time steps that capture the required performance with large numbers of network elements. However, the small-time step implies a high …

A Method For The Measurement Of The Latency Tolerance Range Of Western Musicians, Jorge Medina Victoria

PhDs

This thesis presents a new systematic method to measure the ability of western musicians to cope with latency. The core of the method is a listening test and the development of a measure. The viability of the method is statistically tested with an empirical observation of 31 test subjects performing on 17 different musical instruments.

The primary goal of the investigation is the development of a systematic, reliable and replicable method that can be applied to different western music instruments, in order to provide data for analysis on latency issues while performing music in non-collaborative performances. In addition, a measure …

Fall Detection Using Channel State Information From Wifi Devices, D.M Sameera Palipana

PhDs

Falls among the independently living elderly population are a major public health worry, leading to injuries, loss of confidence to live independently and even to death. Each year, one in three people aged 65 and older falls and one in five of them suffers fatal or non fatal injuries. Therefore, detecting a fall early and alerting caregivers can potentially save lives and increase the standard of living. Existing solutions, e.g. push-button, wearables, cameras, radar, pressure and vibration sensors, have limited public adoption either due to the requirement for wearing the device at all times or installing specialized and expensive infrastructure. …

Impact Of Combined Heat And Power Generation On An Industrial Site Distribution Network, Thomas Neally

Masters

Presence of Distributed Generation (DG) in Industrial Site Distribution Network (ISDN) can represent a significant impact on the operational characteristics of the network. Present planning and operation criteria use for ISDN are in general not suitable to cope with the presence of a significant DG capacity. The presence of DG provides considerable benefits from both engineering and economic viewpoints. However, it changes radial configurations of the distribution feeders. Consequently it may cause coordination failure to existing protection system which is originally set based on radial configuration. In addition, high penetration of DG into ISDN may increase feeder loss, and cause …

Wireless Sensors For Health Monitoring Of Marine Structures And Machinery, Francisco David Rojas Calvente

PhDs

Remote structural and machinery health monitoring (SMHM) of marine structures such as ships, oil and gas rigs, freight container terminals, and marine energy platforms can ensure their reliability. However, the wired sensors currently used in these applications are difficult and expensive to install and maintain. Wireless Sensor Networks (WSN) can potentially replace them but there are significant capability gaps that currently prevent their long-term deployment in the harsh marine environment and the structurally-complex, compartmentalised, all-metal scenarios with high volume occupancy of piping, ducting and operational machinery represented by marine structures. These gaps are in sensing, processing and communication hardware and …

Efficient Control Message Dissemination In Dense Wireless Lighting Networks, Conrad Dandelski

PhDs

Modern lighting systems using LED light sources lead to dense lighting installations. The control of such systems using wireless Machine-to-Machine (M2M) where standard LED light sources are replaced by wirelessly controllable LED light sources create new problems which are investigated in this thesis. Current approaches for control message transmission is such networks are based on broadcasting messages among luminaires. However, adequate communication performance - in particular, sufficiently low latency and synchronicity - is difficult to ensure in such networks, in particular, if the network is part of a wireless building management system and carries not only low-latency broadcast messages but …

Controlled Switching Of Reactive Loads And Commisioning Regimes, Eoin Cowhey

Masters

Switching is a vital task in any power system for ensuring its safe and reliable operation. Switching may be necessary for fault clearance, to ensure wider system stability and to prevent damage to plant. It is essential for isolation, to allow technicians to carry out maintenance tasks safely. Also, switching of reactive loads such as shunt capacitor banks and shunt reactors, is crucial for controlling system voltage.

Switching of some loads however, may produce voltage transients and heavy transient inrush currents which can impact on wider system power quality, impact customers and cause damage or deterioration of the insulation of …

Design And Implementation Of A Micro-Inverter For Photovoltaic Applications, Chi-Thang Phan-Tan

Masters

The objective of this work is to design and build a novel topology of a micro-inverter to directly convert DC power from a photovoltaic module to AC power. In the proposed micro-inverter, a structure with two power stages, which are DC/DC and then DC/AC converters, is used. A novel MPPT algorithm is implemented and evaluated in the DC/DC converter to optimize the solar panel energy production. The new method operates with an efficiency of 97.9%, which is a 1% improvement on the standard method, and a response time of

In this research, the following approach is taken. A literature review …

Semiconductor Materials And Devices For 2 Micron Generation, Dzianis Saladukha

Theses

In the last century, semiconductor research has led to significant changes in the fields of communication, medicine, the environment, and many others. Semiconductor devices provide a relatively simple and effective way to convert electrical energy to light and vice versa. Devices based on semiconductor materials of various kinds provide interaction of an electromagnetic signal in the range of wavelengths with a medium. Examples of such devices are LED lamps, photovoltaic cells, thermometers, gas sensors, cameras, and many others. The study of various semiconductors broadens the range of application of photonics. This work is based on the study of materials which …

A Plastic Encapsulated Wireless Sensor Module For Monitoring Of Medical Steam Sterilisers, Jinto George

Theses

Steam sterilisation is a process of removing or killing living organisms from medical equipment using saturated steam in a steriliser at 134°C and 3 bar pressure. Monitoring of the steriliser is very important to verify whether the sterilisation cycle is adequate or not. In current practice, hospitals widely use chemical or biological indicators for monitoring the performance of the sterilisation cycle but these are simple pass/fail monitors and do not allow continuous monitoring. This thesis presents design and development of a real time wireless sensing module (WSM) for monitoring the sterilisation cycle which can be used to replace existing chemical …

An Adaptive Physical- And Link Layer For Narrowband Mobile Ad-Hoc Networks, Mathias Dehm

Theses

Search and Rescue (SAR) missions require robust ad-hoc networks especially in situations where existing wired or cellular networks have been damaged or are not available. Here, a promising SAR communications technology is a Mobile Ad-hoc Networks (MANETs). However, development of systems is challenging due to bandwidth constraints, various application services, high mobility and harsh environments leading to unstable wireless connections.

Throughout this thesis, a prototype of a physical- and link layer is developed which satisfies the criteria for communication services in SAR missions.

This work includes three major contributions:

The first contribution is a single-carrier narrowband physical layer. The transmission …

Service And Communication Management In Cooperative Vehicular Networks, Olivia Brickley

Theses

The concept of Intelligent Transportation Systems (ITS) presents new R&D challenges for the transportation and ICT sectors and is currently receiving considerable interest from the research community. The primary objective of ITS is the creation of advanced road traffic systems for improved traffic safety, efficiency, and travelling comfort. Basic vehicle and roadside infrastructure collaboration allows for an increase in efficiency and safety and acts as the foundation for an extensive service set to achieve these ITS goals. Applications such as journey planning, automatic tolling and emergency warnings, among others, are envisaged in a system which can potentially reform modern transportation. …

A Novel Waveform For Emergency Services Mobile Ad-Hoc Networks : The Link Layer Perspective, Sebastian Helmle

Theses

Existing wireless communication systems of emergency services mainly enable ordinary unicast or broadcast voice communications. The increasing demand for data services such as messaging, file transfer, maps, etc requires those long-range communication systems to provide higher data rates while maintaining robustness against link failures. In this thesis, various aspects of a link layer design specifically for narrowband mobile ad-hoc networks (MANETs) that are targeted at emergency services are investigated.

The major aspect of this thesis is the optimisation of a time division multiple access (TDMA) design considering both efficient and reliable multicast resource reservation. An approach to mathematically describe a …

A New Algorithm For Piecewise Affine System Identification And Its Application To A Mems Switch, Niel Canty

Theses

Over the past ten years, hybrid systems, and piecewise affine (PWA) systems in particular have been viewed as viable option for modelling nonlinear systems. Many methods have been developed to cater for the identification of a PWA model from input/output data. This thesis focuses on the clustering based identification approach. This method uses a Least Squares (LS) identification algorithm which, in this thesis, is shown to perform poorly in practice. The clustering based algorithm is also limited by the number of initialisation parameters that need to be chosen. These parameters have a significant influence on the resulting PWA model accuracy, …

Location Management And Hybrid Geo-Routing For Urban Vehicular Networks, Aisling O'Driscoll

Theses

In recent years the motivation for comfort applications e.g. infotainment, file exchange and vehicle to vehicle (V2V) multiplayer gaming amongst others, has emerged as an active area of vehicular communications and network research. The success of such applications relies on the ability of a geo-routing protocol to deliver communication packets in a frequently disconnected communication environment. To do this, the location of the destination vehicle must first be determined and secondly, must reliably deliver the packet from source to destination. To determine the location of a target vehicle towards which packets can be forwarded, geo-routing algorithms utilise a location service …

Non-Uniform Transmission Lines For Ultra Wideband: Design Optimisation And Interfacing To Antennas And Loads, Prasanth Moolakuzhy Narayanan

Theses

This thesis presents the electrical characterization of ultra-wideband non- uniform transmission lines (UWB NUTLs). Non-uniform transmission lines have been identified as a successful device for ultra-wideband pulse shaping, which can be designed to generate complex and arbitrary pulse shapes as an impulse response. The performance of a range of UWB NUTLs, with different substrate materials and load impedances, has been characterised. In addition, the possibility of interfacing NUTL with antennas and the filtering effect of antennas has been investigated. To characterise the NUTLs, knowledge of current literature related to NUTL designs is required. A detailed review of the literature published …

A Distributed Model Predictive Control For Multi-Agent Multi-Rate Systems, Samira Roshany-Yamchi

Theses

In this thesis, a new method is proposed to control multi-agent multi-rate systems with linear dynamics that are coupled via inputs and states. These systems are multi-rate in the sense that either output measurements or input updates are not available at certain sampling. Such systems can arise when the number of sensors is less than the number of variables to be controlled or when measurements of outputs cannot be completed simultaneously because of applicational limitations. The multi-rate nature gives rise to lack of information which will cause uncertainty in the system's performance.

The proposal is to control such systems with …

A Service Provisioning Architecture For Next Generation Wireless Sensor Networks - The Wsn Cloud, Muhammad Sohaib Aslam

Theses

The relentless demand for pervasive computing in our everyday lives has led to and will continue to drive the roll out of large scale embedded systems in the form of Wireless Sensor Networks or WSNs in our environment. This in turn drives the need for reusable, flexible and manageable WSN infrastructures. To simplify system operation and maintenance as well as to reduce costs, WSNs must become an infrastructure that is capable of providing services to multiple end users concurrently rather than having to roll out individual infrastructures for specific purposes as is typical nowadays. This thesis presents the concept of …

Voltage Rise Mitigation In A Weak Distribution Network Due To The Impact Of Distributed Generation, Donal Caples

Theses

There are numerous aspects of a distribution network that must be studied in order to determine the maximum size of distributed generation that can be accommodated on the distribution network before supply standards are breached. Voltage rise is one of the main aspects of concern when connecting a distributed generator to a distribution network and this thesis develops the understanding of this phenomenon and concludes with a real life study.

Mathematical and computer simulation software examples within this thesis demonstrate how voltage rise can be reduced to the maximum allowable limit, a major concern if the capacity of a distributed …

Theoretical And Experimental Analysis Of Mems Ohmic Switch Design And Control For Reliability Improvement, Cuong Do

Theses

MEMS devices are micromechanical components fabricated using semiconductor fabrication technologies. With advanced functionalities and miniaturization, MEMS devices are being employed in a wide variety of applications, especially in mobile networks. The MEMS ohmic switch is one of the most promising MEMS devices and has the same principle of a mechanical moving switch to manipulate an electrical signal. Due to the existence of mechanical movement, and its compactness, reliability issues have been observed as the main barrier to commercialisation.

This thesis addresses the key issue of reliability in the rapidly expanding area of MEMS. In particular, MEMS ohmic switches are considered. …

A Traffic Metering And Marking Technique For Fair Bandwidth Allocation In High Speed Networks, Mary Looney

Theses

The deployment of Quality of Service (QoS) in high speed networks is vital to successful application delivery, especially those that are data-intensive. Continuous efforts have been made to develop infrastructures for enhancing QoS capabilities to manage available bandwidth through the use of traffic conditioners. However, research shows that these techniques distribute bandwidth in an unfair manner. This thesis addresses the failings of traffic conditioning techniques for bandwidth QoS provisioning. Traffic conditioners are comprised of two components, a traffic meter that is responsible for measuring transient characteristics of a traffic stream through a rate estimation technique and a traffic marker that …

Wireless Sensor Networks: Empowering Reliable, Realtime & Resource Efficient Communication For Cyber-Physical Applications, Jasvinder Singh

Theses

Since their inception, Wireless Sensor Networks (WSNs) have been successfully employed as low-rate data gathering networks in numerous monitoring applications. Recently, a new domain of WSNs applications, known as Cyber-Physical Systems (CPS) has started attracting significant attention world-wide. In these applications, monitoring only the state of the physical system (process or environment) is not sufficient, the system must respond to the sensed events/data within certain time constraints by performing actions upon the physical entity. It is expected that in approaching years, WSNs will be integrated in a myriad of CPS applications, for example high confidence medical systems, assisted living, traffic …

Protection Of Embedded Systems For Applications Involving High Loading Rate Mechanical Forces, Amjad Alsakarneh

Theses

This thesis describes the development of a methodology to optimise the dimensions and mechanical properties of force-absorbing layers surrounding miniaturised embedded electronic modules subject to high mechanical compressive/impact forces and vibration. While much has been published on the mechanical protection of electronic systems in larger scale applications, where traditional mechanical shock absorbers and springs can be used to protect the electronics, little has been published on the mechanical protection of miniature electronic modules embedded in smart structures and materials where traditional methods of mechanical protection are not feasible. The generalised system concept used in this thesis is of module encapsulation …

Power Cable Fault Finding Using Pseudo Random Binary Sequences, Holger Geisler

Theses

The work that is presented in this thesis documents the results obtained from the pseudo random binary sequence (PRBS) cable testing method which utilises a pseudo noise (pN) sequence as a test stimulus to localise faults on a transmission line. The work targets the proof of concept of the PRBS method in a Coaxial cable as well as its eventual evaluation for fault testing accuracy and performance on a real-world underground steel wired armour (SWA) cable. Further, a novel hardware implementation of the method utilising a Field Programmable Gate Array (FPGA) is presented. The theory of the PRBS test method …

Ultra Wideband Pulse Shaping, Pawel Rulikowski

Theses

Methods for shaping of sophisticated, transient, ultra wideband (UWB) waveforms and pulses are presented. The methods include novel circuits based on step recovery diodes (SRDs) and quasi-transversal filter concepts but the majority of the work focuses on UWB pulse shaping using completely passive nonuniform transmission lines (NUTLs). It is shown, for the first time, that NUTLs can be used to generate highly sophisticated arbitrary UWB pulse shapes, including modified Hermite polynomial (MHP) and approximate spheroidal wave function (APSWF) pulses which are not known to have been previously generated in practice, and a generalized methodology, verified by experiments, for design of …