Open Access. Powered by Scholars. Published by Universities.®
- Discipline
- Institution
- Publication
- Publication Type
Articles 1 - 7 of 7
Full-Text Articles in Computational Engineering
Lap Joint On St.37 Steel Plate With Friction Welding Clamping Method, Widia Setiawan, Nugroho Santoso, Wiyadi Wiyadi, Muhammad Sulistiyo Aji, Rachmat Alamin, Achsan Tarmudi
Lap Joint On St.37 Steel Plate With Friction Welding Clamping Method, Widia Setiawan, Nugroho Santoso, Wiyadi Wiyadi, Muhammad Sulistiyo Aji, Rachmat Alamin, Achsan Tarmudi
Journal of Mechanical Engineering Science and Technology (JMEST)
Friction stir (FW) welding is a relatively fresh method that was created and has been continually refined and adapted to industrial applications due to its benefits. This approach for solid-state joining entails connecting the components at a temperature below their melting point and then heating them up. Clamp joint applications are widely used using external heating and hitting with high strength, but the clamped joints with the FW method are rarely done. The research studied the characteristic of clamped joints at various plate thicknesses using the FW method. In this study, 30 specimens were used in the form of a …
Surface Quality Of Fe, Ni And Cr Added Hyper-Eutectic Al-Si Automotive Alloys Under Up-Milling And Down-Milling Operation, Akib Abdullah Khan, Mashiur Rahman Shoummo, Mohammad Salim Kaiser
Surface Quality Of Fe, Ni And Cr Added Hyper-Eutectic Al-Si Automotive Alloys Under Up-Milling And Down-Milling Operation, Akib Abdullah Khan, Mashiur Rahman Shoummo, Mohammad Salim Kaiser
Journal of Mechanical Engineering Science and Technology (JMEST)
Effect of the elements Fe, Ni, and Cr on the surface quality under machining of hyper-eutectic aluminiumbased Al-Si automotive alloys has been carried out as the elements improve the properties of this alloy. Machining is done on a horizontal type milling machine using a high-speed steel slab milling cutter in dry condition. Only the cutting speed varies throughout the experiment, while the machining feed and depth of cut remain fixed. The experimental results show that the addition of these alloying elements increases the roughness and hardness specially due to formation of Fe-rich intermetallic ��-����5��������. However, the needle-like ��-����5�������� has been …
The Effect Of Multi-Extrusion Process Of Polylactic Acid On Tensile Strength And Fracture Morphology Of Filament Product, Muhamad Syaifuddin, Heru Suryanto, Suprayitno Suprayitno
The Effect Of Multi-Extrusion Process Of Polylactic Acid On Tensile Strength And Fracture Morphology Of Filament Product, Muhamad Syaifuddin, Heru Suryanto, Suprayitno Suprayitno
Journal of Mechanical Engineering Science and Technology (JMEST)
Polylactic acid (PLA) is one of the most used materials in FDM 3D Printing. Large-scale consumption of PLA on an industrial scale could cause environmental and efficiency problems. Thus, PLA waste and industry waste need to be recycled to limit excessive waste. This study aimed to investigate the change in mechanical property, morphology, and structure of mechanically recycled PLA. Recycling was performed 12 times using the extrusion process with an extrusion temperature nozzle of 170°C. The SEM, structural analysis, and amorphous-crystalline analysis used XRD. The results showed a gradual decrease of tensile strength from each recycle with a total of …
Physical Behavior Of Thermally Affected Bronze And Brass, Samiul Kaiser, Mohammad Salim Kaiser
Physical Behavior Of Thermally Affected Bronze And Brass, Samiul Kaiser, Mohammad Salim Kaiser
Journal of Mechanical Engineering Science and Technology (JMEST)
The physical behavior of thermally affected cast copper, aluminum bronze and brass has been studied by subjecting to heating isochronally for one hour at a range of 600°C. It shows that solid-solution hardening takes place into the Al added bronze and Zn added brass metal. Due to heating Al forms hard and brittle intermetallic of copper aluminates into the bronze metal which responses some age-hardening effects. The electrical conductivity of the metals increases initially through heat treatment due to stress relieving and finally decreases due to formation of intermetallic precipitates. The color of the heated samples are also studied through …
Study On The Thermal Distortion, Hardness, And Microstructure Of St 37 Steel Plate Joined Using Fcaw, Maijuansyah Maijuansyah, Yanuar Rohmat Aji Pradana, Gaguk Jatisukamto, Solichin Solichin
Study On The Thermal Distortion, Hardness, And Microstructure Of St 37 Steel Plate Joined Using Fcaw, Maijuansyah Maijuansyah, Yanuar Rohmat Aji Pradana, Gaguk Jatisukamto, Solichin Solichin
Journal of Mechanical Engineering Science and Technology (JMEST)
This study sets out to investigate the distortion angle, microstructure, and hardness of St 37 steel plate weld joint produced by FCAW using the welding current of 80, 110, and 140 A. By using flat position, CO2 and E71T-1 wire were utilized as a shielding gas and electrode filler, respectively. The distortion angle measurement was done on 3 different locations of the welded sample perpendicular to weld direction by using bevel protractor. The micro Vickers tests were then applied gradually at the crosssectional surface with a distance of 0, 5, 10 and 15 mm from weld centerline using the load …
The Effect Of Rotational Speed, Friction Duration, And Pressure On Tensile Strength Of Aisi 6061 Welding Joints, Dewi Puspitasari, Poppy Puspitasari, M. Rizka Gita Firmansyah, Solichin Solichin
The Effect Of Rotational Speed, Friction Duration, And Pressure On Tensile Strength Of Aisi 6061 Welding Joints, Dewi Puspitasari, Poppy Puspitasari, M. Rizka Gita Firmansyah, Solichin Solichin
Journal of Mechanical Engineering Science and Technology (JMEST)
Electric arc welding with covered electrodes is ideally suited for flat plates. If this technique is employed for welding rigid bodies, the results would be of poor quality. One viable solution to weld rigid bodies is through friction welding. The study aimed to investigate the tensile strength of specimens subjected to friction welding with variations in rotational speed, friction time, and pressure and to examine the microstructure of friction welding joints. This research used the one-shot case study design and involved descriptive analysis. The descriptive analysis described the results of tensile testing and microstructure of welding joints. Results showed that …
Quantitative Characterization Of Microstructure Features For 1st Generation Advanced High Strength Steels, Margarita Vidrio, Ellen Liu, Donsheng Li, Kyoo Sil Choi, Xin Sun
Quantitative Characterization Of Microstructure Features For 1st Generation Advanced High Strength Steels, Margarita Vidrio, Ellen Liu, Donsheng Li, Kyoo Sil Choi, Xin Sun
STAR Program Research Presentations
The role of Advanced High Strength Steels (AHSS) in the automotive industry is important because of its affordability and excellent mechanical properties. The 1st generation of AHSS achieves its preferred combination of strength and ductility by embedding harder martensite grains into softer ferritic matrix. Ductility and strength of these steels are important to safety, formability, application, and life. However, a noticeable degree of inconsistent forming behaviors has been observed in the 1st generation AHSS in production, which seems to be related to the microstructure-level inhomogeneity. The objective of this project is to grain fundamental understandings on how different microstructure level …