Computational Engineering Commons^™

Evaluating Storage And Effective Moduli Of In Situ Polymerised And Melt Extruded Pa6 Graphite (G) Composites, Muneer Umar, Michael Ikpi Ofem, Auwal Sani Anwar, Muhammad Murtala Usman

Journal of Mechanical Engineering Science and Technology (JMEST)

Four PA6/graphite (G) composites systems were made. Two using in situ polymerisation equivalent in mixing strain and two systems melt extrusion of equivalent processing strain. The effective modulus of the carbons, room temperature storage modulus and storage modulus at 80 ⁰C were evaluated. The composite/unfilled PA6 ratios at E25 and that at E80 for the in situ polymerised system IG 40/10 are 1.37 and 1.63, respectively. For the in situ polymerised system IG 20/20, the same were 1.96 and 2.28, respectively. For the melt-extruded systems, G 100/6 had the best E25 ratio of 1.67 and E80 of 2.03, whereas the …

The Effect Of Thickness And Type Of Material On The Sheared Edge Characteristics Of Keychain Cranioplasty Plate Blanking Product Using Eccentric Press Machine, Didin Zakariya Lubis, Lea Rachmat Indrasepta, Redyarsa Dharma Bintara, Rizky Ramadhan, Agung Budi Darmawan

Journal of Mechanical Engineering Science and Technology (JMEST)

Keychain cranioplasty plate product has the potential to be produced using the blanking process because it is faster, low-cost, and requires low-energy consumption compared to other mechanical operations. This research aimed to find the effect of material thickness and type on the sheared edge characteristics of keychain cranioplasty plate using the blanking process to meet the international health standard. Experimental research conducted using an eccentric press machine with 40 tons capacity. This research’s test material parameters of titanium (Ti-6AL-4V) and stainless steel (SS-316L) were the 0.5 mm, 0.6 mm, and 0.8 mm thickness with a maximum blanking velocity of 3000 …

Effect Of Dcrp And Dcsp Polarity On The Depth Of Penetration Of Smaw On Low Carbon Steel Astm A36 Using E7018 Electrode, Ma'mun Hidayat, Helleni Febnesia, Sulaeman Deni Ramdani

Journal of Mechanical Engineering Science and Technology (JMEST)

The study aims to determine the level of penetration depth using SMAW (Shielded Metal Arc Welding) Process based on the polarity type of DCRP (Direct Current Reverse Polarity) and DCSP (Direct Current Straight Polarity). This research used ASTM A36 low carbon steel plate with thickness of 6 mm and length of 200 mm, Electrode E7018 LB-52-18 ∅ 3.2 mm, and with current parameters of 90 A, 100 A, 110 A, 120 A and 130 A and 70 ° welding arc angle. The method used the experimental research. Data collection techniques applied direct observation techniques and descriptive statistical data analysis techniques. …

Camshaft Failure Simulation With Static Structural Approach, Riduwan Prasetya, Andoko Andoko, Suprayitno Suprayitno

Journal of Mechanical Engineering Science and Technology (JMEST)

A failure happens within the camshaft of the minibus when the vehicle is in utilize. The camshaft was a fracture within the bearing between the primary cylinder exhaust valve and the second cylinder suction. This simulation aims to find the causes of camshaft failure utilizing the finite element method with a static structural approach, including simulations of deformation, strain, stress, fatigue life (stress-life and strainlife), and cracks. The method used in this paper is the finite element method with a static structural approach by ANSYS software. The camshaft material is a gray cast iron designed using Solidworks. Pre-processing includes meshing …

The Effect Of Multi-Extrusion Process Of Polylactic Acid On Tensile Strength And Fracture Morphology Of Filament Product, Muhamad Syaifuddin, Heru Suryanto, Suprayitno Suprayitno

Journal of Mechanical Engineering Science and Technology (JMEST)

Polylactic acid (PLA) is one of the most used materials in FDM 3D Printing. Large-scale consumption of PLA on an industrial scale could cause environmental and efficiency problems. Thus, PLA waste and industry waste need to be recycled to limit excessive waste. This study aimed to investigate the change in mechanical property, morphology, and structure of mechanically recycled PLA. Recycling was performed 12 times using the extrusion process with an extrusion temperature nozzle of 170°C. The SEM, structural analysis, and amorphous-crystalline analysis used XRD. The results showed a gradual decrease of tensile strength from each recycle with a total of …

Influence Of Extracellular Matrix Stiffness And Topography On Neuronal Cell Behavior And Neurite Outgrowth, Mohan Yasodharababu

Graduate Theses and Dissertations

The focus of regeneration therapy for traumatic brain injuries and Alzheimer's disease is on the promotion and growth of neuronal cells. In vitro research attempts to improve this by modifying the stiffness and topography of the extracellular matrix (ECM). However, the limitations of in vitro experiments make it difficult to control the individual factors influencing neuronal cell growth. A computational model can be used to decouple individual factors and study them individually to gain a better understanding of the mechanics between the neuronal cell and ECM, which will aid in the design of in vitro experimental studies.

This study develops …

A New Heuristic Algorithm For Accuracy And Computational Efficiency For Solving Minimum Cost Flow Problems, Timothy Michael Chávez

Computational Modeling & Simulation Engineering Theses & Dissertations

While the minimum cost flow (MCF) problems have been well documented in many publications, due to its broad applications, little or no effort has been devoted to explaining the algorithms for identifying loop formation and computing the θ value needed to solve MCF network problems. This paper proposes efficient numerical procedures and MATLAB computer implementation for computing the θ value. Furthermore, this paper also proposes a mixed heuristic, shortest path (SP) Chavez-Nguyen (or Chayen) Algorithm in Phase 1 (to obtain the basic feasible solution) and, either the conventional MCF or MATLAB’s built-in Linprog() function, in Phase 2 (to obtain the …

Modernization Of Scienttific Mathematics Formula In Technology, Iwasan D. Kejawa Ed.D, Prof. Iwasan D. Kejawa Ed.D

Department of Mathematics: Faculty Publications

Abstract
Is it true that we solve problem using techniques in form of formula? Mathematical formulas can be derived through thinking of a problem or situation. Research has shown that we can create formulas by applying theoretical, technical, and applied knowledge. The knowledge derives from brainstorming and actual experience can be represented by formulas. It is intended that this research article is geared by an audience of average knowledge level of solving mathematics and scientific intricacies. This work details an introductory level of simple, at times complex problems in a mathematical epidermis and computability and solvability in a Computer Science. …

Stock Market Manipulation Detection Using Continuous Wavelet Transform & Machine Learning Classification, Sarah Youssef

Theses and Dissertations

Stock market manipulation detection is important for both investors and regulators. Being able to detect stock manipulation and preventing it gives investors the confidence in the market fairness and integrity. It also helps maintaining liquidity of the stocks and market efficiency. Implementing data mining algorithms in manipulation detection is a relatively recent technique but in the past few years there has been an increasing interest in it's applications in this domain. The benefit of monitoring manipulative trade behavior is that it can be implemented on live feed of stock data, which saves a lot of time in detecting stock price …

Fluid-Structure Interaction Of Nrel 5-Mw Wind Turbine, Mohamed Sayed Elkady Abd-Elhay

Theses and Dissertations

Wind energy is considered one of the major sources of renewable energy. Nowadays, wind turbine blades could exceed 100 m to maximize the generated power and minimize produced energy cost. Due to the enormous size of the wind turbines, the blades are subjected to failure by aerodynamics loads or instability issues. Also, the gravitational and centrifugal loads affect the wind turbine design because of the huge mass of the blades. Accordingly, wind turbine simulation became efficient in blade design to reduce the cost of its manufacturing. The fluid-structure interaction (FSI) is considered an effective way to study the turbine's behavior …

Leveraging Intermediate Artifacts To Improve Automated Trace Link Retrieval, Alberto D. Rodriguez

Master's Theses

Software traceability establishes a network of connections between diverse artifacts such as requirements, design, and code. However, given the cost and effort of creating and maintaining trace links manually, researchers have proposed automated approaches using information retrieval techniques. Current approaches focus almost entirely upon generating links between pairs of artifacts and have not leveraged the broader network of interconnected artifacts. In this paper we investigate the use of intermediate artifacts to enhance the accuracy of the generated trace links – focus- ing on paths consisting of source, target, and intermediate artifacts. We propose and evaluate combinations of techniques for computing …

Reducing Vale's Memory Management Overhead Through Static Analysis, Theodore C. Watkins

Master's Theses

Vale is a multi-purpose programming language that focuses on guaranteeing memory safety with minimal effect on performance. To accomplish this, Vale utilizes a memory management system called Hybrid Generational Memory (HGM). HGM uses generational references to track the state of objects in memory, and static analysis to reduce memory management overhead at runtime. This thesis describes the program that performs static analysis on Vale source code during compilation, and analyzes its effect on the performance of Vale programs.

Dependencyvis: Helping Developers Visualize Software Dependency Information, Nathan Lui

Master's Theses

The use of dependencies have been increasing in popularity over the past decade, especially as package managers such as JavaScript's npm has made getting these packages a simple command to run. However, while incidents such as the left-pad incident has increased awareness of how vulnerable relying on these packages are, there is still some work to be done when it comes to getting developers to take the extra research step to determine if a package is up to standards. Finding metrics of different packages and comparing them is always a difficult and time consuming task, especially since potential vulnerabilities are …

Stock Markets Performance During A Pandemic: How Contagious Is Covid-19?, Yara Abushahba

Theses and Dissertations

Background and Motivation: The coronavirus (“COVID-19”) pandemic, the subsequent policies and lockdowns have unarguably led to an unprecedented fluid circumstance worldwide. The panic and fluctuations in the stock markets were unparalleled. It is inarguable that real-time availability of news and social media platforms like Twitter played a vital role in driving the investors’ sentiment during such global shock.

Purpose:The purpose of this thesis is to study how the investor sentiment in relation to COVID-19 pandemic influenced stock markets globally and how stock markets globally are integrated and contagious. We analyze COVID-19 sentiment through the Twitter posts and investigate its …

Bibliometric Review Of Predictive Maintenance Using Vibration Analysis, Aashna Midha Ms., Ishita Maheshwari Ms., Kaushik Ojha Mr., Kritika Gupta Ms., Shripad V. Deshpande Mr.

Library Philosophy and Practice (e-journal)

Every day the world is depending more and more on machines in almost every aspect of life. With the increasing use of machines, there also needs to be an evolution in the maintenance of these machines. Predictive maintenance is a process used to monitor the equipment and machinery during its operation to detect any damages and/or deteriorations and enable the required maintenance plan in advance, resulting in reduced operational costs and full utilization of tools and parts. The fundamental goal of this bibliometric review paper is a comprehension of the extent and sources of the literature available for predictive maintenance …

Improving The 2d Numerical Simulations On Local Scour Hole Around Spur Dikes, Chung Ta Liao, Keh Chia Yeh, Yin Chi Lan, Ren Kai Jhong, Yafei Jia

Faculty and Student Publications

Local scour is a common threat to structures such as bridge piers, abutments, and dikes that are constructed on natural rivers. To reduce the risk of foundation failure, the understanding of local scour phenomenon around hydraulic structures is important. The well-predicted scour depth can be used as a reference for structural foundation design and river management. Numerical simulation is relatively efficient at studying these issues. Currently, two-dimensional (2D) mobile-bed models are widely used for river engineering. However, a common 2D model is inadequate for solving the three-dimensional (3D) flow field and local scour phenomenon because of the depth-averaged hypothesis. This …

Improving The Accuracy Of Measuring The Volume And Mass Of Liquid Product In Horizontal Cylindrical Tanks, Nodirbek Rustambekovich Yusupbekov, Azamat Alijonovich Yusupov, Bobir Alisher Ogli Boronov

Chemical Technology, Control and Management

The article is devoted to improving the accuracy of the system for measuring and controlling the level of liquid materials in horizontal cylindrical tanks. The task of ensuring continuous accurate control of the level, volume and mass of petroleum products, taking into account the shape of the bottom of the tank, is set. In order to improve the accuracy of the measuring device, a laser rangefinder is installed, which allows you to determine the distance from the tank lid to the point of the surface level of the liquid product and calculate the volume of the liquid material by determining …

Computational Design Of Nonlinear Stress-Strain Of Isotropic Materials, Askhad M.Polatov, Akhmat M. Ikramov, Daniyarbek Razmukhamedov

Chemical Technology, Control and Management

The article deals with the problems of numerical modeling of nonlinear physical processes of the stress-strain state of structural elements. An elastoplastic medium of a homogeneous solid material is investigated. The results of computational experiments on the study of the process of physically nonlinear deformation of isotropic elements of three-dimensional structures with a system of one- and double-periodic spherical cavities under uniaxial compression are presented. The influence and mutual influence of stress concentrators in the form of spherical cavities, vertically located two cavities and a horizontally located system of two cavities on the deformation of the structure are investigated. Numerical …

Assessment Of Contract Terms And Conditions For Lump-Sum Contracts, Omar Othman

Theses and Dissertations

A Contract is a tool that defines the obligations of the contracting parties and assigns the risk between them. Contracts are usually drafted to meet the interests of the owner by addressing the legal issues and liabilities. Meanwhile, less emphasis is placed on clearly communicating the contract terms and ensuring that all contracting parties comprehend their risks and obligations. In a country like Egypt, which has faced drastic economic and political changes in the past few years, and yet is experiencing a boom in the construction sector, many developers tend to draft contracts that might be legally complicated or lacks …

Context-Aware Sensing And Fusion For Structural Health Monitoring And Night Time Traffic Surveillance, Xinxiang Zhang

Electrical Engineering Theses and Dissertations

Rapid developments in computer vision technologies have been transforming many traditional fields in engineering and science in the last few decades, especially in terms of diagnosing problems from visual images. Leveraging computer vision technologies to inspect, monitor, assess infrastructure conditions, and analyze traffic dynamics, has gained significant increase in both effectiveness and efficiency, compared to the cost of traditional instrumentation arrays to monitor, and manually inspect civil infrastructures and traffic conditions. Therefore, to construct the next-generation intelligent civil and transportation infrastructures, this dissertation develops a comprehensive computer-vision based sensing and fusion framework for structural health monitoring and intelligent transportation systems. …

A Deep Learning Model For Predicting Covid-19 Transmission In Connecticut, Nathan Choi

Honors Scholar Theses

COVID-19 has immensely impacted life as we know it, as the virus quickly spread throughout the entire world in a matter of weeks since its emergence. It has toppled economies, tested healthcare systems worldwide, and has un- fortunately taken the lives of many in the process. While extensive research has analyzed the issue on a large scale, focusing on entire countries and states, there has not been as much focus on the meso-scale, mainly compris- ing towns and cities, due to the lack of available COVID-19 data at this scale. However, in the case of countries like the United States …

Silicon Valley 2.0

In The Loop

The DePaul Innovation Development Lab is a collaborative ecosystem that joins business and academia in mutually beneficial, experimental enterprise. Students work in the techcentric think tank and consultancy that turns business problems into functional, testable software prototypes.

Expanding Image Datasets For Deep Learning By Evaluating Independence Through Coefficient Correlation And Mean-Squared Error, Ayman Yousef

Biomedical Engineering Undergraduate Honors Theses

With deep learning being leveraged more regularly in the field of image classification, particularly in medical imaging, network optimizations have become a field in and of itself. With open source, comprehensive medical image datasets few and far, computational dataset expansion has become a useful tool for researchers without the ability to further manually collect data. However, with the rich amount of data that imaging modalities like multi-photon microscopy collect at a time, there is potential to expand datasets through proper utilization of this data that often time goes unused. Previous deep learning studies have shown that improper expansion can conflate …

Quantifying The Benefits Of A Collaborative Supply Chain Network Using A Discrete-Time Vehicle Routing Model, Matthew Walters

Industrial Engineering Undergraduate Honors Theses

The transportation industry contributed around one trillion dollars to the economy in 2016 accounting for 8.9% percent of the GDP. In 2017, it was responsible for 1.5 billion tons of CO₂ emissions. With the American Trucking agency predicting a 35% growth in the trucking industry between 2016 and 2027, there are rising concerns about the impact the trucking industry will have on the economy and the environment. The trucking industry is also very inefficient with many trucks driving with empty loads or with less than full capacity loads. There is potential to save billions of dollars and cut back …

The Future Of Artificial Intelligence, Alex Guerra

Emerging Writers

Whether we like it or not Artificial Intelligence (AI) is coming, and we are not ready for it. AI has unimaginable potential and will revolutionize the world over the next few decades, but with this great potential we are faced with choices that could prove detrimental to humanity. This article examines the challenges AI presents and explores possible solutions to make AI align with human interests.

A Deep Learning-Based Automatic Object Detection Method For Autonomous Driving Ships, Ojonoka Erika Atawodi

Master's Theses

An important feature of an Autonomous Surface Vehicles (ASV) is its capability of automatic object detection to avoid collisions, obstacles and navigate on their own.

Deep learning has made some significant headway in solving fundamental challenges associated with object detection and computer vision. With tremendous demand and advancement in the technologies associated with ASVs, a growing interest in applying deep learning techniques in handling challenges pertaining to autonomous ship driving has substantially increased over the years.

In this thesis, we study, design, and implement an object recognition framework that detects and recognizes objects found in the sea. We first curated …

Modern Methods Of Testing And Information Security Problems In Iot, Halim Khujamatov, Ernazar Reypnazarov, Amir Lazarev

Bulletin of TUIT: Management and Communication Technologies

This article analyzes the technology of the internet of things, ie its architecture, communication standards, threats to security and safety, methods and types of testing devices of the internet of things. In short, the architectures proposed by ITU-T and IWF, IEEE standards for Internet of Things, LPWAN standards, four levels of security (devices/gateways, network/transport, services and applications), components according to test methods, performance, loading, security, etc.

Coding Club, Nicole Livingston, Madalyn Meyer

Honors Program: Expanded Learning Clubs

Lesson plans for an about 12-week club designed to introduce middle schoolers to coding using Scratch. By the end of the club, every student will have made a game they can share with the class and have learned basic coding and game creation tools. Students can also miss classes or join late and still be able to join and enjoy the club with a different focus lesson every week.

Application Of The Cluster Classification Data Mining Method To Child Illiteracy In Indonesia, Muhammad Arifin, Gita Widi Bhawika, M.A. Muazar Habibi, Winci Firdaus, Danu Eko Agustinova, Robbi Rahim

Library Philosophy and Practice (e-journal)

The objective of this study is to cluster and classify data using a combination of the k-means and C4.5 methods. The process involves clustering and subsequent classification. The classification process uses k-folds = 10 and samples = stratified sampling. In this study, analphabets in Indonesia of a minimum age of 15 years (15+) were evaluated. The data are the percentage of analogs between 2017 and 2019. The dataset was obtained from https://www.bps.go.id and is accessible at https://osf.io/crwug. In this study, the Davies Bouldin index (DBI) was used to determine the number of clusters with an optimal DBI value of k …

A Dynamic Programming Approach To Determine Optimum Modularity Level In Industrial Packaging, Marshal Louie, Kumar B

Journal of Applied Packaging Research

Modular packaging facilitate customization for accommodating variable product sizes in a product family. When determining package sizes for product variability, packaging engineers does not find difficulty to determine package dimension for less product variety whereas if the product variety is more, then determining the dimension of modular package involves complex decision-making and time-consuming process to find the optimal solution. This in turn directly impacts the overall lead time of the supply chain. Thus, in this paper a dynamic programming is developed to determine the quantity and dimension of modular packages for every demand of assorted products sizes. The program helps …