Open Access. Powered by Scholars. Published by Universities.®

Computational Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Materials Science and Engineering

Institution
Keyword
Publication Year
Publication
Publication Type

Articles 121 - 150 of 261

Full-Text Articles in Computational Engineering

Vertical Shaft Kinetic Turbine Performance Using A Cup-Shape Blade, Kennie A. Lempoy, Nita C. V. Monintja, Arwanto M. A. Lakat Nov 2023

Vertical Shaft Kinetic Turbine Performance Using A Cup-Shape Blade, Kennie A. Lempoy, Nita C. V. Monintja, Arwanto M. A. Lakat

Journal of Mechanical Engineering Science and Technology (JMEST)

The abundant availability of alternative energy sources forms the fundamental foundation for rural energy development. In particular, renewable energy sources are indispensable in rural areas due to their ecofriendly nature and widespread accessibility, which helps preserve the environment by avoiding pollution. Indonesia, a country blessed with vast water resources, especially its rivers, holds enormous potential for harnessing kinetic energy derived from fast-flowing river waters. Effective utilization of this kinetic energy has the potential to address energy shortages in the country. In this context, there is a pressing need to enhance the efficiency of kinetic turbines designed to function as electricity …

Go to article

Effect Of The Homogenization Process On Titanium Oxide-Reinforced Nanocellulose Composite Membranes, Taufiq Mahsuli, Aisyah Larasati, Aminnudin Aminnudin, Jibril Maulana Nov 2023

Effect Of The Homogenization Process On Titanium Oxide-Reinforced Nanocellulose Composite Membranes, Taufiq Mahsuli, Aisyah Larasati, Aminnudin Aminnudin, Jibril Maulana

Journal of Mechanical Engineering Science and Technology (JMEST)

Indonesian pineapple production can reach 200 tons per day; however, pineapples generate a significant amount of waste. Pineapple peel waste can be used to make membranes. Composite membranes containing TiO2 have dense properties, low porosity, and increase the mechanical strength of the cellulose sheet. This research uses various ultrasonic homogenizers to homogenize the distribution of nanocellulose and TiO2 (50% and 100% power with 30, 60, and 90 minutes). The casting method is used to shape the membrane. The SEM test shows that the higher the power used and the longer the sonication time, the less agglomeration of about 1.63%/ cm2 …

Go to article

Heat Conduction In Cylindrical Coordinates With Time-Varying Conduction Coefficients: A Practical Engineering Approach, Lulut Alfaris, Ruben Cornelius Siagian, Aldi Cahya Muhammad, Ukta Indra Nyuswantoro, Budiman Nasution Nov 2023

Heat Conduction In Cylindrical Coordinates With Time-Varying Conduction Coefficients: A Practical Engineering Approach, Lulut Alfaris, Ruben Cornelius Siagian, Aldi Cahya Muhammad, Ukta Indra Nyuswantoro, Budiman Nasution

Journal of Mechanical Engineering Science and Technology (JMEST)

This research aims to develop a mathematical method for expressing the Laplace operator in cylindrical coordinates and applying it to solve heat conduction equations in various scenarios. The method commences by transforming Cartesian coordinates into cylindrical coordinates and identifying the necessary substitutions. The result is the expression of the Laplace operator in cylindrical coordinates, which is subsequently employed to address heat conduction equations within cylindrical coordinates. Various cases encompassing different initial and boundary conditions, as well as variations in the conduction coefficient over time, are meticulously considered. In each instance, precise mathematical solutions are determined and subjected to thorough analysis. …

Go to article

Analysis Of Fire And Smoke Spread In Ki Hajar Dewantara Auditorium, State University Of Jakarta, Using Fire Dynamics Simulator, Pratomo Setyadi, Ariq Harits Arrizq Jul 2023

Analysis Of Fire And Smoke Spread In Ki Hajar Dewantara Auditorium, State University Of Jakarta, Using Fire Dynamics Simulator, Pratomo Setyadi, Ariq Harits Arrizq

Journal of Mechanical Engineering Science and Technology (JMEST)

Fire behavior and smoke spread are influenced by various factors, including the amount and condition of combustible material, ventilation openings, and ceiling height. A high amount of combustible material in the auditorium poses a significant fire hazard, hence, efforts need to be made to minimize the risk. One approach is to use Computational Fluid Dynamic software, such as Fire Dynamics Simulator (FDS), to model fire combustion. In this research, it provides an overview of the heat release rate (HRR) of fires that occur as well as the effect of differences in ceiling height and the effect of ventilation on fire …

Go to article

Mechanical Properties Of Biocomposite With Various Composition Of Caco3 And Starch, Agris Setiawan, Fransisca Diana Wahyuningsih, Riria Zendy Mirahati Jul 2023

Mechanical Properties Of Biocomposite With Various Composition Of Caco3 And Starch, Agris Setiawan, Fransisca Diana Wahyuningsih, Riria Zendy Mirahati

Journal of Mechanical Engineering Science and Technology (JMEST)

Calcium carbonate has the potential to be used in the development of medical materials, including biomaterials. Biocomposite is composed of CaCO3 as matrix material and bioplastic from the combination of corn starch and cassava starch as reinforcement. This study aims to determine mechanical properties such as tensile strength and bending/flexural strength with varying compositions of CaCO3 and bioplastic. Characterization of the biocomposite uses Scanning Electron Microscope to observe the microstructure and composition elements of their structure. This study used 4 variations in the ratio of CaCO3 suspension: (Corn Starch + Cassava Starch). Each sample was characterized using specimen code A …

Go to article

Effect Of Grafting Nano-Tio2 On Sansevieria Cylindrica Fiber Properties, Chrisrulita Sekaradi Wiguna, Heru Suryanto, Aminuddin Aminuddin, Jibril Maulana, Joseph Selvi Binoj, Alamry Ali Jul 2023

Effect Of Grafting Nano-Tio2 On Sansevieria Cylindrica Fiber Properties, Chrisrulita Sekaradi Wiguna, Heru Suryanto, Aminuddin Aminuddin, Jibril Maulana, Joseph Selvi Binoj, Alamry Ali

Journal of Mechanical Engineering Science and Technology (JMEST)

Natural fibers, which are abundant, environmentally friendly, and biodegradable, are used as a replacement for synthetic fibers. The composite strength can be increased by treating the surfaces of natural fibers with suitable chemicals, which can also improve the interface interaction between fiber and matrix. Application of a coupling agent in chemical treatment is utilized to reinforce the bonding between fiber and matrix. The objective of the study is to determine the influence of silane concentration on the Sansevieria cylindrica fiber properties. The methods included fibers treatment using ethanol and coupling agent as dissolving and TiO2 with concentrations of 0%, 0.25%, …

Go to article

Synthesis And Characterization Of Nitrogen-Doped Activated Carbon For Lithium Battery Anode Applications, Prihanto Trihutomo, Poppy Puspitasari, Muhammad Bustomi Radja, Milzam Rahmat Busono Jul 2023

Synthesis And Characterization Of Nitrogen-Doped Activated Carbon For Lithium Battery Anode Applications, Prihanto Trihutomo, Poppy Puspitasari, Muhammad Bustomi Radja, Milzam Rahmat Busono

Journal of Mechanical Engineering Science and Technology (JMEST)

Nitrogen-dopped activated carbon was synthesized to see its effect on the characterization of the nitrogen surface functional groups, crystal size, and morphology of the resulting sample. Synthesis of nitrogen-doped activated carbon was carried out by varying the addition of Urea as a nitrogen doping source. Activated carbon compared its characteristics with variations in the concentration of added Urea to activated carbon, at 1:3 and 1:5. The FTIR results obtained were the presence of functional groups indicating the presence of nitrogen bonds in each sample. The crystallinity results showed that the samples were classified as crystalline and nitrogen doping influenced the …

Go to article

The Combustion Characteristics Of Calophyllum Inophyllum Fuel In The Presence Of Magnetic Field, Imam Rudi Sugara, Nasrul Ilminnafik, Salahuddin Junus, Muh Nurkoyim Kustanto, Yuni Hermawan Jul 2023

The Combustion Characteristics Of Calophyllum Inophyllum Fuel In The Presence Of Magnetic Field, Imam Rudi Sugara, Nasrul Ilminnafik, Salahuddin Junus, Muh Nurkoyim Kustanto, Yuni Hermawan

Journal of Mechanical Engineering Science and Technology (JMEST)

The study objective is to investigate the combustion characteristics of Callophyllum inophyllum fuel in presence of a magnetic fields. To conduct the experiment, a bunsen burner was utilized, with fuel and air being dispensed via a syringe pump and compressor, both regulated by a flowmeter. The fuel and air pipes were heated to 532.15 (K) to facilitate fuel evaporation. The equivalent ratio of 0.5, 1, and 1.5 was adjusted to control air discharge and fuel. An 11,000 gausses artificial magnet was used, with N-S, N-S, N-N, and SS being the various magnetic pole configurations. The study found that the magnetic …

Go to article

Effect Of Current And Pulse-On Time On Material Removal Rate And Surface Roughness Of Tungsten Carbide In Electric Discharge Machine Die-Sinking, Mochamad Deny Riyanto, Andoko Andoko, Heru Suryanto Jul 2023

Effect Of Current And Pulse-On Time On Material Removal Rate And Surface Roughness Of Tungsten Carbide In Electric Discharge Machine Die-Sinking, Mochamad Deny Riyanto, Andoko Andoko, Heru Suryanto

Journal of Mechanical Engineering Science and Technology (JMEST)

The focus of manufacturing for tungsten carbide applications often demands a smooth surface quality as the result of the Electric Discharge Machine (EDM) die-sinking process, especially in the manufacture of die and mold with tungsten carbide material processed using a die-sinking EDM machine. The purpose of this study is to analyze the effect of electric current and pulse-on time on the Material Removal Rate (MRR) and surface roughness of tungsten carbide. Through the experimental method, the parameters varied, namely electric current 17 A, 20 A, 23 A, and pulse-on time 30 µs, 55 µs, and 80 µs. MRR was calculated …

Go to article

Lap Joint On St.37 Steel Plate With Friction Welding Clamping Method, Widia Setiawan, Nugroho Santoso, Wiyadi Wiyadi, Muhammad Sulistiyo Aji, Rachmat Alamin, Achsan Tarmudi Jul 2023

Lap Joint On St.37 Steel Plate With Friction Welding Clamping Method, Widia Setiawan, Nugroho Santoso, Wiyadi Wiyadi, Muhammad Sulistiyo Aji, Rachmat Alamin, Achsan Tarmudi

Journal of Mechanical Engineering Science and Technology (JMEST)

Friction stir (FW) welding is a relatively fresh method that was created and has been continually refined and adapted to industrial applications due to its benefits. This approach for solid-state joining entails connecting the components at a temperature below their melting point and then heating them up. Clamp joint applications are widely used using external heating and hitting with high strength, but the clamped joints with the FW method are rarely done. The research studied the characteristic of clamped joints at various plate thicknesses using the FW method. In this study, 30 specimens were used in the form of a …

Go to article

The Effect Of Cutting Speed Of Nitrogen Laser Cutting On The Surface Texture Of Sus 304 Plate, Yanuar Rohmat Aji Pradana, Raka Afrianto, Chandra Hairat Abdul Rahman, Andoko Andoko Jul 2023

The Effect Of Cutting Speed Of Nitrogen Laser Cutting On The Surface Texture Of Sus 304 Plate, Yanuar Rohmat Aji Pradana, Raka Afrianto, Chandra Hairat Abdul Rahman, Andoko Andoko

Journal of Mechanical Engineering Science and Technology (JMEST)

The focus of today’s machining industry is on how to maintain high productivity and low cost achieved by high tool life during the operation. Laser cutting is considered the right solution because it offers cutting speeds of up to 170000 mm/min through a non-contact process regardless of the workpiece material hardness. The aim of this study is to analyze the effect of cutting speed on the surface texture aspects namely surface roughness, kerf shape, and dross height on the stainless steel 304 plate after laser cutting. The nitrogen laser was utilized with the cutting speed of 400, 1700, and 2000 …

Go to article

Effect Of Temperature Variations Of Corn (Maize) Oil Biodiesel On Torque Values And Thermal Efficiency Of Diesel Engines, Suardi Suardi, Rodlian Jamal Ikhwani, Ade Putri Rezki Aulia Jul 2023

Effect Of Temperature Variations Of Corn (Maize) Oil Biodiesel On Torque Values And Thermal Efficiency Of Diesel Engines, Suardi Suardi, Rodlian Jamal Ikhwani, Ade Putri Rezki Aulia

Journal of Mechanical Engineering Science and Technology (JMEST)

The trend of consumption of hydrocarbon fuels in Indonesia, which is increasing every year, is not accompanied by the amount of production, which is decreasing. Alternative fuels to reduce dependence on hydrocarbon fuels. One form of alternative fuel is biodiesel, which is made from corn (maize) oil. Corn oil itself, if processed, can be an option for clean and environmentally friendly energy option and that is the main objective of this research is to determine the performance of biodiesel corn oil on diesel engines. The method used in this study is an experimental method where corn oil biodiesel is tested …

Go to article

Designing A Naabsa Class Tanker Ship With Bottom Protection From Ground, Victor A. Kulesh, Mathias B. Prasetio, Fam Chung Hiep Jul 2023

Designing A Naabsa Class Tanker Ship With Bottom Protection From Ground, Victor A. Kulesh, Mathias B. Prasetio, Fam Chung Hiep

Journal of Mechanical Engineering Science and Technology (JMEST)

Indonesia is the world's largest archipelago country with a high potential for economic development and top producer and exporter of palm oil. As an archipelago country, the most efficient cargo transportation routes are through rivers and seas. Designing and building tankers, taking into account the specifics of the operation, are relevant. The paper considers the issues of designing a tanker for the transportation of crude palm oil with a defined operation area and route. The general concept of the vessel is proposed, taking into account the restrictions on the navigation area and draft for operation in the river. Particular attention …

Go to article

Neurocomputing And Interfacing Digital Tasting System: Research, Design, And Evaluation, Amira J. Zaylaa, Ahmad El Hajj Jun 2023

Neurocomputing And Interfacing Digital Tasting System: Research, Design, And Evaluation, Amira J. Zaylaa, Ahmad El Hajj

BAU Journal - Science and Technology

The continuous evolution in computing and interfacing has been extended to develop multi-sensory experiences in many domains such as neurological, auditory, vision, and haptic domains. So far, only a few remarkable system approaches have been approved to be serving the taste sensation digitally. Although taste sensation is linked to the brain, there is a lack of optimal neurocomputing digital taste sensation systems. Our study provides a new neurocomputing method to digitally stimulate the sense of taste by electrical stimulation on the human tongue. We aim to link chemical stimulation and electrical stimulation in order to design an electronic interface for …

Go to article

Machine Learning-Based Data And Model Driven Bayesian Uncertanity Quantification Of Inverse Problems For Suspended Non-Structural System, Zhiyuan Qin May 2023

Machine Learning-Based Data And Model Driven Bayesian Uncertanity Quantification Of Inverse Problems For Suspended Non-Structural System, Zhiyuan Qin

All Dissertations

Inverse problems involve extracting the internal structure of a physical system from noisy measurement data. In many fields, the Bayesian inference is used to address the ill-conditioned nature of the inverse problem by incorporating prior information through an initial distribution. In the nonparametric Bayesian framework, surrogate models such as Gaussian Processes or Deep Neural Networks are used as flexible and effective probabilistic modeling tools to overcome the high-dimensional curse and reduce computational costs. In practical systems and computer models, uncertainties can be addressed through parameter calibration, sensitivity analysis, and uncertainty quantification, leading to improved reliability and robustness of decision and …

Go to article

Molecular Dynamics Modeling Of Polymers For Aerospace Composites, Swapnil Sambhaji Bamane Jan 2023

Molecular Dynamics Modeling Of Polymers For Aerospace Composites, Swapnil Sambhaji Bamane

Dissertations, Master's Theses and Master's Reports

Polymer matrix composite materials are widely used as structural materials in aerospace and aeronautical vehicles. Resin/reinforcement wetting and the effect of polymerization on the thermo-mechanical properties of the resin are key parameters in the manufacturing of aerospace composite materials. Determining the contact angle between combinations of liquid resin and reinforcement surfaces is a common method for quantifying wettability. It is challenging to determine contact angle values experimentally of high-performance resins on CNT materials such as CNT, graphene, bundles or yarns, and BNNT surfaces. It is also experimentally difficult to determine the effect of polymerization reaction on material properties of a …

Go to article

Investigation Of The Effect Of Corundum Layer On The Heat Transfer Of Sic Slab, Sri Elsa Fatmi, Donanta Dhaneswara, Muhammad Anis, Ahmad Ashari Dec 2022

Investigation Of The Effect Of Corundum Layer On The Heat Transfer Of Sic Slab, Sri Elsa Fatmi, Donanta Dhaneswara, Muhammad Anis, Ahmad Ashari

Journal of Materials Exploration and Findings

Aluminum is the most widely used metal in industry. Aluminum smelting is one of the important steps that needs to be carried out to produce products made of aluminum metal with good quality. In the process of smelting aluminum there are several problems that occur, one of which is the growth of corundum in Si C refractories which affects the quality of aluminum melt and the durability of Si C refractories. This research was conducted to see the heat transfer in Si C and the effect of the presence of Corundum on heat transfer. This research was carried out by …

Go to article

Dynamic Rbi With Central Difference Method Approach In Calculation Of Uniform Corrosion Rate: A Casestudy On Gas Pipelines, M.Riefqi Dwi Alviansyah, Fernanda Hartoyo, Zahra Nadia Nurullia, Ari Kurniawan Dec 2022

Dynamic Rbi With Central Difference Method Approach In Calculation Of Uniform Corrosion Rate: A Casestudy On Gas Pipelines, M.Riefqi Dwi Alviansyah, Fernanda Hartoyo, Zahra Nadia Nurullia, Ari Kurniawan

Journal of Materials Exploration and Findings

The oil and gas industry generally uses a piping system to drain fluids. Even though the pipes used have been well designed, the use of pipes as a means of fluid transportation still provides the possibility of failure that can occur at any time, one of which is due to uniform corrosion. The use of standard Risk Based Inspection (RBI) according to the API RBI 581 document has been widely used to anticipate potential failures to pipe components. The use of standard RBI can reduce the risk of failure significantly. Because the standard RBI considers the component risk value to …

Go to article

Study On Predictive Maintenance Of V-Belt In Milling Machines Using Machine Learning, Reza Aulia Rahman, Mohammad Faishol Erikyatna, Achmad Fauzan Hery Soegiharto Nov 2022

Study On Predictive Maintenance Of V-Belt In Milling Machines Using Machine Learning, Reza Aulia Rahman, Mohammad Faishol Erikyatna, Achmad Fauzan Hery Soegiharto

Journal of Mechanical Engineering Science and Technology (JMEST)

Towards industry 4.0, monitoring the degradation of machine tools’ components becomes a key feature so that smooth productivity is achieved. To preserve the functionality and performance of the machine tools, proper maintenance activities must be planned and carried out. V-belt is important component in machine tools that transmits power from the electric motor spindle in order to machine to work and cut desired material properly. The purpose of this research is to develop a predictive maintenance system for v-belt milling machine Krisbow 31N2F using machine learning. The machine learning algorithm models using multiple and simple linear regression algorithm was developed …

Go to article

Investigate The Potential Renewable Energy Of Microalgae Spirulina Sp Using Proximate Analyzer, Sem-Edx, And Thermogravimetry, Yahya Zakaria, Sukarni Sukarni, Poppy Puspitasari, Nandang Mufti, Samsudin Anis, Anwar Johari Nov 2022

Investigate The Potential Renewable Energy Of Microalgae Spirulina Sp Using Proximate Analyzer, Sem-Edx, And Thermogravimetry, Yahya Zakaria, Sukarni Sukarni, Poppy Puspitasari, Nandang Mufti, Samsudin Anis, Anwar Johari

Journal of Mechanical Engineering Science and Technology (JMEST)

Microalgae Spirulina sp which has been cultivated by the Brackishwater Aquaculture Development Center, Situbondo Indonesia were tested for their potential energy performance using proximate analyzer, SEMEDX, and thermogravimetry. The proximate analyzer showed volatile matter (VM), fixed carbon (FC), moisture, ash content (AC), total sulfur of microalgae Spirulina sp 68.15, 12.57, 11.22, 8.06, and 0.67 (wt%, ar), respectively, and the gross calorific value (GCV) is 4971 kcal/kg (dry basis). SEM-EDX test showed the morphology and chemical content of Spirulina sp. The content of microalgae Spirulina sp is dominated by carbon (C) and oxygen (O), then followed by chlorine (Cl), sodium (Na), …

Go to article

The Effect Of Nozzle Temperature, Infill Geometry, Layer Height And Fan Speed On Roughness Surface In Petg Filament, Doohan Taqdissillah, Aris Zainul Mutaqqin, Mahros Darsin, Dedi Dwilaksana, Nasrul Ilminnafik Nov 2022

The Effect Of Nozzle Temperature, Infill Geometry, Layer Height And Fan Speed On Roughness Surface In Petg Filament, Doohan Taqdissillah, Aris Zainul Mutaqqin, Mahros Darsin, Dedi Dwilaksana, Nasrul Ilminnafik

Journal of Mechanical Engineering Science and Technology (JMEST)

3D printing is a process of making three-dimensional solid objects from a digital file process created by laying down successive layers of material until the object is created. Many filaments can be used in 3D printing, one of which is PETG (PolyEthylene Terephthalate Glycol). PETG is a modification of PET (PolyEthylene Terephthalate) with added glycol at a molecular level to offer different chemical properties that provide significant chemical resistance, durability, and excellent formability for manufacturing. This study aims to find the most optimal parameter of surface roughness of PETG with different parameters of nozzle temperature, infill geometry, layer height and …

Go to article

True Stress-Strain Behavior Of Al-Based Cast Automotive Alloy Under Different Ageing Conditions And The Effect Of Trace Zr, Mashiur Rahman Shoummo, Akib Abdullah Khan, Mohammad Salim Kaiser Nov 2022

True Stress-Strain Behavior Of Al-Based Cast Automotive Alloy Under Different Ageing Conditions And The Effect Of Trace Zr, Mashiur Rahman Shoummo, Akib Abdullah Khan, Mohammad Salim Kaiser

Journal of Mechanical Engineering Science and Technology (JMEST)

A thorough investigation has been carried out on the Al-12Si-1Mg-1Cu-1Ni automotive alloy considering different properties, specially mechanical properties associated with true stress and true strain with Zr addition of trace amount. A commercially available piston is melted to produce the alloy, and trace amount of Zr is added to make another. The base alloy along with the Zr added alloy had been applied to homogenization, solution treatment, quenching, and ageing in order to get the age-hardening response. The alloys have been heat-treated at 25 ºC, 200 ºC, and 300 ºC, respectively, for four hours for attaining the under, peak and …

Go to article

Effect Of Graphene Addition On Bacterial Cellulose-Based Nanocomposite, Jibril Maulana, Heru Suryanto, Aminnudin Aminnudin Nov 2022

Effect Of Graphene Addition On Bacterial Cellulose-Based Nanocomposite, Jibril Maulana, Heru Suryanto, Aminnudin Aminnudin

Journal of Mechanical Engineering Science and Technology (JMEST)

Bacterial cellulose (BC) is a widespread, low-cost biopolymer that has generally been produced from plants and biomass waste. A method for improving the range of applications for bacterial cellulose is adding graphene material. It has an outstanding feature that can increase the performance of nanocomposite materials. The research aims to observe the effect of graphene on the surface morphology, crystallinity, chemical bonding, and tensile strength of BC/CuO nanocomposite. For this study's synthesis, BC was synthesized by fermenting pineapple peel extract for 10 to 14 days. The produced BC was crushed, homogenized with a nano homogenizer machine, and filtered. Filtered BC, …

Go to article

Backpack Effects On Two-Dimensional Gait Spatiotemporal And Kinematic Parameters, Nardo Rizaldy, Alvin Alvin, Wirawan Lingga, Ethan B.W. Goeij, F. Ferryanto Nov 2022

Backpack Effects On Two-Dimensional Gait Spatiotemporal And Kinematic Parameters, Nardo Rizaldy, Alvin Alvin, Wirawan Lingga, Ethan B.W. Goeij, F. Ferryanto

Journal of Mechanical Engineering Science and Technology (JMEST)

Loads could affect the body gait in various ways. Backpacks, sling bags, suitcases, and even trolleys could hugely affect human gait without us realizing it. The effects of these loads have been scientifically researched in biomechanics and sports science for the past few years. For instance, the comparison of walking with and without a backpack could easily reveal significant differences in body segments, which could be utilized for therapy and medicine development. The aim of this research is to determine the differences of the spatiotemporal kinematic parameters between a conventional human gait and a backpackloaded gait. Some parameters to be …

Go to article

Contents, Jaka Fajar Fatriansyah Aug 2022

Contents, Jaka Fajar Fatriansyah

Journal of Materials Exploration and Findings

No abstract provided.

Go to article

Preface Of Volume 1 Issue 1 On Journal Of Materials Exploration And Findings (Jmef), Jaka Fajar Fatriansyah Aug 2022

Preface Of Volume 1 Issue 1 On Journal Of Materials Exploration And Findings (Jmef), Jaka Fajar Fatriansyah

Journal of Materials Exploration and Findings

No abstract provided.

Go to article

The Optimization Of Failure Risk Estimation On The Uniform Corrosion Rate With A Non-Linear Function, Fernanda Hartoyo, Jaka Fajar Fatriansyah, Imam Abdillah Mas'ud, Farhan Rama Digita, Hanna Ovelia, D. Rizal Asral Aug 2022

The Optimization Of Failure Risk Estimation On The Uniform Corrosion Rate With A Non-Linear Function, Fernanda Hartoyo, Jaka Fajar Fatriansyah, Imam Abdillah Mas'ud, Farhan Rama Digita, Hanna Ovelia, D. Rizal Asral

Journal of Materials Exploration and Findings

Failures in the oil and gas pipeline system are conditions that must be avoided and anticipated because the losses due to the failures can occur at a very high level. Internal corrosion is one of the significant causes of the failures in pipeline systems. In addition, this type of corrosion is due to the high content of carbon dioxide and other corrosive substances in crude oil and natural gas. Therefore, an optimal inspection scheduling system is required to prevent the possibility of pipeline failures due to corrosion and to avoid any overspending on the budget due to excessive inspection scheduling. …

Go to article

Investigating Features And Output Correlation Coefficient Of Natural Fiber-Reinforced Poly(Lactic Acid) Biocomposites, Andreas Federico, Siti Norasmah Surip, Wan Nor Raihan Wan Jaafar, Jaka Fajar Fatriansyah, Agrin Febrian Pradana Aug 2022

Investigating Features And Output Correlation Coefficient Of Natural Fiber-Reinforced Poly(Lactic Acid) Biocomposites, Andreas Federico, Siti Norasmah Surip, Wan Nor Raihan Wan Jaafar, Jaka Fajar Fatriansyah, Agrin Febrian Pradana

Journal of Materials Exploration and Findings

Polylactic acid (PLA) material has the potential to be applied in various industrial fields, but this material has shortcomings in terms of mechanical properties, especially mechanical strength, due to brittleness nature of PLA. The manufacture of PLA composite material with the addition of natural fibers as a reinforcing phase is one of the methods to increase the impact strength and maintain the biodegradable properties of the material. However, in theory, there are many factors that affect the mechanical properties of composite materials, thus making the mechanical properties of composites more complex than monolithic materials. The mechanical properties of these composite …

Go to article

Quantum-Mechanical Evaluation Of Defects In Uranium-Bearing Materials, Megan Hoover Aug 2022

Quantum-Mechanical Evaluation Of Defects In Uranium-Bearing Materials, Megan Hoover

All Dissertations

Quantum-mechanical calculations using density functional theory with the generalized gradient approximation were employed to investigate the effects dopants have on the uranium dioxide (UO2) structure. Uraninite is a common U4+ mineral in the Earth's crust and an important material used to produce energy and medical isotopes. Though the incorporation mechanism remains unclear, divalent cations are known to incorporate into the uranium dioxide system. Three charge-balancing mechanisms were evaluated to achieve a net neutral system, including the substitution of (1) a divalent cation for a tetravalent uranium atom and oxygen atom; (2) two divalent cations for a tetravalent …

Go to article

Passive Prosthetic Ankle Design Based On Indonesian Anthropometry, Wahyu Dwi Lestari Jul 2022

Passive Prosthetic Ankle Design Based On Indonesian Anthropometry, Wahyu Dwi Lestari

Journal of Mechanical Engineering Science and Technology (JMEST)

Foot prosthesis is a replacement for the foot to overcome activity limitations due to disease, birth defects, accidents, or amputations. Many foot prosthetics have been developed in recent years to treat patients. However, prostheses on the market today have drawbacks, including their high price, lack of comfort, stiff ankles, and low durability. The main objective of this study is to develop an existing ankle-foot prosthesis design that approximates the resemblance of a human foot according to the anthropometry of Asians, especially Indonesians. This study contains the design of a prosthetic foot with a skin design model and a support core. …

Go to article

First Prev Next Last