Computational Engineering Commons^™

Performance Analysis For Wimax Wireless Systems With Multiple Receive Antennas, Selcuk Taskin

Electrical & Computer Engineering Theses & Dissertations

Broadband wireless access has become the best way to meet the growing demand for fast Internet connections. WiMAX is one of the most promising broadband access technologies that allows fast deployment as well as low maintenance costs. WiMAX allows efficient use available bandwidth by using orthogonal frequency division multiplexing (OFDM) which is an efficient multi-carrier modulation technique. Diversity is a method for improving the reliability of a signal in fading environments by using two or more communication channels and is usually achieved by multiple antenna techniques.

In this thesis, receiver side diversity combining methods are studied and the performance of …

Solving The Vehicle Re-Identification Problem By Using Neural Networks, Tanweer Rashid

Computational Modeling & Simulation Engineering Theses & Dissertations

Vehicle re-identification is the process by which vehicle attributes measured at one point on a road network are compared to vehicle attributes measured at another point in an effort to match vehicles without using any unique identifiers such as license plate numbers. A match is made if the two measurements are estimated to belong to the same vehicle. Vehicle attributes can be sensor readings such as loop induction signatures, or they can also be actual vehicle characteristics such as length, weight, number of axles, etc. This research makes use of vehicle length, travel time, axle spacing and axle weights for …

Electronic Warfare By Using Unmanned Aerial Vehicles, Aydin Meric

Electrical & Computer Engineering Theses & Dissertations

Technology continues to evolve rapidly by the day. Developments in technology should be followed closely if a country wants to become more powerful. Nowadays nobody can afford to ignore the importance of Electronic Warfare and Unmanned Aerial Vehicles (UAV) in military applications. Both of them play a crucial role in military operations that they can change the course of a war.

There are different kinds of Electronic Warfare methods that can be applied according to the situations and any evolving circumstances. In the beginning Electronic Warfare was used mainly for defensive purposes, but these days Electronic Warfare is used for …

Enhancing Simulation Composability And Interoperability Using Conceptual/Semantic/Ontological Models, Andreas Tolk, John A. Miller

Computational Modeling & Simulation Engineering Faculty Publications

(First paragraph) Two emerging trends in Modeling and Simulation (M&S) are beginning to dovetail in a potentially highly productive manner, namely conceptual modeling and semantic modeling. Conceptual modeling has existed for several decades, but its importance has risen to the forefront in the last decade (Taylor and Robinson, 2006; Robinson, 2007). Also, during the last decade, progress on the Semantic Web has begun to influence M&S, with the development of general modeling ontologies (Miller et al, 2004), as well as ontologies for modeling particular domains (Durak, 2006). An ontology, which is a formal specification of a conceptualization (Gruber et al, …

Electroencephalogram Artifact Removal Using A Wavelet Neural Network, Hoang-Anh T. Nguyen

Electrical & Computer Engineering Theses & Dissertations

A wavelet neural network (WNN) technique rs developed for electroencephalogram (EEG) artifact removal without electrooculographic (EOG) recordings. The algorithm combines the universal approximation characteristics of neural networks and the time/frequency property of wavelet, where the neural network was trained on a simulated dataset with known ground truths. The contribution of this thesis is two-fold. First, many EEG artifact removal algorithms, including regression based methods, require reference EOG signals, which are not always available. To remove EEG ai1ifacts, a WNN tries to learn the characteristics of the artifacts first and does not need reference EOG signals once trained. Second, WNNs are …

A Low Power Touch Screen Document Viewer, Chris Perfetto

Computer Engineering

This document will cover the requirements, design, implementation and testing of a low power touch screen document viewer to serve as a replacement bulletin board. It was Implemented using a BeagleBoard development board, a 4.3” touchscreen LCD and a SD card with a Ubuntu Linux OS installed. The testing of this device is primarily testing the power consumption. The device is not yet complete and will require further development for it to completely satisfy the requirements.

Ofdm Simulation In Matlab, Paul Guanming Lin

Electrical Engineering

The objective of this project is to demonstrate the concept and feasibility of an OFDM system, and investigate how its performance is changed by varying some of its major parameters. This objective is met by developing a MATLAB program to simulate a basic OFDM system. From the process of this development, the mechanism of an OFDM system can be studied; and with a completed MATLAB program, the characteristics of an OFDM system can be explored.

Pretty Lights, Nicholas (Nick) Delmas, Matthew (Matt) Maniaci

Computer Engineering

Digital media players often include a visualization component that allows a user to watch a visualization synchronized to their music or videos. This project uses the visualization plugin API of an existing media playback program (WinAmp) but it displays its visuals using physical LED lights. Instead of outputting visuals to the computer screen, data is sent over USB to a micro controller that runs the LED lights. This project aims to give users a more visceral visual experience than traditional visualizations on the computer screen.

Determining The Utility Of Technology For Education, Brian Spencer Dillon

Computational Modeling & Simulation Engineering Theses & Dissertations

There is a substantial debate concerning the place of technology in education. This debate has been going on over every technology introduced through at least three millennia although the modern version takes place in journal articles. Technology, in the general sense, is already in the educational arena 1n ways which have become so commonplace that we hardly question them today. More modern technologies, however, meet perpetual resistance in achieving their potential. This paper calls into question the most recent trend in research and suggests a new research paradigm which focuses not only on student achievement, but on a variety of …

Quality-Driven Cross Layer Design For Multimedia Security Over Resource Constrained Wireless Sensor Networks, Wei Wang

Department of Computer Electronics and Engineering: Dissertations, Theses, and Student Research

The strong need for security guarantee, e.g., integrity and authenticity, as well as privacy and confidentiality in wireless multimedia services has driven the development of an emerging research area in low cost Wireless Multimedia Sensor Networks (WMSNs). Unfortunately, those conventional encryption and authentication techniques cannot be applied directly to WMSNs due to inborn challenges such as extremely limited energy, computing and bandwidth resources. This dissertation provides a quality-driven security design and resource allocation framework for WMSNs. The contribution of this dissertation bridges the inter-disciplinary research gap between high layer multimedia signal processing and low layer computer networking. It formulates the …

A Framework For Using Modeling And Simulation-Based Methods In Support Of Project Management In A U.S. Department Of Defense Enterprise Architecture Framework Environment, Jose Leprout Bricio-Neto

Computational Modeling & Simulation Engineering Theses & Dissertations

The Enterprise Architecture, Analysis and Project Management (EA2PM) framework developed and proposed in this study enables better evaluation of the ability for enterprise architects, project managers and analysts to share system data using their own domain-specific software tools with a focus on the capability to automatically generate a discrete-event simulation model. EA2PM framework is based on applying a Knowledge Management (KM) construct to establish data and information boundaries, and developing a methodology that allows for high levels of traceability from system architecture's environmental factors through assessment of data and information mediation across domains within a KM system.

An application of …

Label Oriented Clustering For Social Network Groups, Ahmed El Kholy

Archived Theses and Dissertations

No abstract provided.

Agent Based Modeling In Computer Graphics And Games, Brian Macnamee

Books/Book Chapters

As graphics technology has improved in recent years, more and more importance has been placed on the behavior of virtual characters in applications set in virtual worlds in areas such as games, movies and simulations. The behavior of virtual characters should be believable in order to create the illusion that these virtual worlds are populated with living characters. This has led to the application of agent-based modeling to the control of these virtual characters. There are a number of advantages of using agent-based modeling techniques which include the fact that they remove the requirement for hand controlling all agents in …

An Agent-Based Combat Simulation Framework In Support Of Effect-Based And Net-Centric Evaluation, Robert Joseph Bowen

Computational Modeling & Simulation Engineering Theses & Dissertations

The use of information technologies (IT) and information networks has proliferated in industry as a method to achieve competitive advantage. The U.S. Military and its allies, in recent years, have employed IT to improve the way they conduct operations, speed decision making, and increase the span of control of commanders. This has resulted in a fundamental shift in the way military commanders employ combat units today. These (Information Age) forces no longer have to be able to see each other or even communicate directly in order to synchronize maneuvers. Dispersion is now favored over mass, relying on the IT network …

Immersive Active Learning For Virtual Laboratory Experiments, Swetha Punnandla

Electrical & Computer Engineering Theses & Dissertations

A Laboratory Immersive Interactive Virtual Environment (LIIVE) for scientific experiments is developed using MAY A and Virtools. The LIIVE is used as a pre-lab practice module to familiarize the students with the equipment, procedure and parameters involved in a laboratory experiment. The system has been assessed for its effectiveness as a learning tool by administering a project and a quiz to each participant and conducting a structured observation during the actual laboratory experiment on the real equipment. The learning effect achieved by the LIIVE is compared to the learning effects obtained by the less immersive 2D virtual environment and the …

A Weighted Modular Principal Component Analysis Approach For Face Authentication, Chandrika Tummala

Electrical & Computer Engineering Theses & Dissertations

A weighted modular approach for face authentication based on the priorities of different facial regions that change with varying poses, expressions and occlusions is presented in this thesis. This helps in verifying the identity of an individual who claims to be a subject in the database and is unaware of the presence of the face authentication system. A sequence of face images is selected from a video in a particular predefined interval and is used for verification. The face images are divided into different horizontal modules based on the regions representing facial features. A principal component analysis on these modules …

Evaluation Of The Applicability Of Jc3iedm Based Information Exchange Standardization Efforts To Link-16 Based Systems, Anthony Devivi

Computational Modeling & Simulation Engineering Theses & Dissertations

Command and Control (C2) systems are critical components in decision-making systems in both the military and civilian domains. These systems act as the data evaluation and dissemination tools for larger Command, Control, Computer, Communication, Intelligence, Surveillance, and Recognizance (C4ISR) systems. Typical C2 systems accept a wide variety of inputs from many sources such as radars, weapons systems, simulators, operators, and other C2 systems. The C2 system processes the input data and presents to the user information with which decisions are made. The C2 system also determines what information should be translated and disseminated to other C2 platforms.

The basis for …

Patient-Centred Laboratory Validation Using Software Agents, John Mcgrory, Jane Grimson, Frank Clarke, Peter Gaffney

Conference Papers

Guidelines are self-contained documents which healthcare professionals reference to obtain knowledge about a specific condition or process. They interface with these documents and apply known facts about specific patients to gain useful supportive information to aid in developing a diagnosis or manage a condition. To automate this process a series of Standard Operating Procedures (SOP) and workflow processes are constructed using the contents of these documents in order to manage the validation flow of a patient sample. These processes decompose the guidelines into workflow plans, which are then called using condition triggers controlled by a centralised management engine. The software …

Simulation To Augment Standardized Patients In Obstetric Ultrasound Training, Scott Richard Guirlinger

Computational Modeling & Simulation Engineering Theses & Dissertations

Standardized patients are actors used in medical training to teach and eval11atc clinical skills of students prior to their using these skills on an actual patient. Augmented Reality is a relatively new technology that can be used to augment standardized patients with abnonnalitie8 and pathologies that they cannot portray themselves as normal healthy human beings. In our project, we sought to augment standardized patients with a 12-week- old fetus in order to train and possibly evaluate medical students and professionals in performing obstetric ultrasound procedures and interpreting the corresponding ultrasound image results.

The software library ARToolkit provided the framework for …

Dynamic Routing Structure For An Rti Taking An Evolutionary Approach Towards Optimization, Matthew Ryan Davis

Computational Modeling & Simulation Engineering Theses & Dissertations

The Runtime Infrastructure (RTI) is the common communication framework that High Level Architecture (HLA) simulations incorporate to exchange data. By abstracting the network communication layer from simulation, a common protocol for information exchange is achieved, allowing any RTI- based simulation to exchange data with any other. Such commonality can bring a limitation upon the network infrastructure, enforcing all federates to agree on the same communication policy. While this static network structure is not always the case, an optimal choice would be to adhere to the dynamic properties of a network. Static network configurations deny federates the ability to dynamically avoid …

What Should Be In A Human Behavior Representation Federation Object Model For High Level Architecture, Gurkan Haznedaroglu

Electrical & Computer Engineering Theses & Dissertations

Modeling and Simulation (M&S) can assist in evaluating scenarios and enhancing the performance of operational systems. Fully integrated use of MBS can enable the evaluation of the effectiveness of proposed equipment or software in realistic simulated environments and can provide an assessment of the impacts of specific equipment or capabilities on battle outcomes. Every level, from strategic planners, technology experts, operations research analysts, weapons systems designers and users, testers, maintainers, and cost analysts, has to be interactively involved to maximize the benefits of this approach. Human behavior is a very important part of the M&S process. Especially in constructive simulations, …

Information Visualization Methods And Techniques Using Web Services, Kevin Dupigny

Computational Modeling & Simulation Engineering Theses & Dissertations

Data, even in small amounts, can be difficult to interpret quickly and efficiently. Data domains are continually expanding and making this data available and usable in collaborative data environment is a challenge that was not addressed by legacy systems. Such a framework would make the existence of a global information sharing system feasible. Visualizing this complex dataset presents a complex task for current static interface solutions. A flexible layered service oriented model is presented in this work to approach this challenge. The visual scope of human perception is largely untapped by today's data visualization applications. Human mental processes are adept …

A Component Based Formal Ontology Model, A Method For Evaluating Such A Model, And The Results Of An Application Of That Method, Charles Tumitsa

Computational Modeling & Simulation Engineering Theses & Dissertations

For systems to truly communicate effectively, more than just data interchange is necessary. The systems must achieve conceptual interoperability, which implies communicating with understanding.

The LCIM (Levels of Conceptual Interoperability Model) describes a number of levels of interoperability, each of which shows systems with an increased amount of conceptual understanding of the other systems they are communicating with. The lowest levels of this model, technical and syntactic interoperability, are achieved (and there are many existing examples) via data exchange in a number of different ways. Research has shown, however, that to attain higher levels of conceptual understanding, that there must …

A Comparative Analysis Of Air-To-Ground Engagement Outcomes In The Joint Warfare System (Jwars) And The Jwars-Joint Semi-Automated Forces Federation, Melissa Anne St. Peter

Computational Modeling & Simulation Engineering Theses & Dissertations

Multi-resolution modeling is the process by which a single model is created by connecting multiple individual models to describe phenomena at different levels of resolution [1]. "When we change resolutions, replacing a detailed model by a more aggregate one, we must ask whether results are 'consistent'" [2].

There are many methods of determining if the results of two simulations are 'consistent'. However, they are very entailed and require a detailed understanding of the individual models including their functionality, algorithms, and inner workings. A straight forward and rapid way of assessing potential inconsistencies is through a statistical comparison of the model …

Electromagnetic Wave Propagation Prediction For Wireless Networks Inside Boeing Fuselages, Mennatoallah Youssef

Electrical & Computer Engineering Theses & Dissertations

Commercial grade software is intended for electromagnetic predictions within office buildings; it was used to develop models to analyze propagation inside airplane fuselages. This study shows that Wireless XGTD and Insite software can accurately predict power propagation within airplane fuselages. Current work uses fuselage models, which contain additional internal components. A comparison was made between empty and full fuselage to examine the effects of internal components. Two propagation model types [Fast 3D and Full 3D] were also compared for accuracy to experimental study. It was concluded that completed fuselages are suggested for further simulation study as well as that the …

Fine-Tuning Of Mass-Spring Model Properties For Simulating Realistic Soft Body Deformation, Sylva A. Girtelschmid

Computational Modeling & Simulation Engineering Theses & Dissertations

Obtaining a well behaved soft-tissue model is one of the most challenging and important tasks in the development of surgical simulation systems. Achieving both accurate and real-time deformation response from a soft-tissue model becomes more difficult as the complexity of the represented anatomy and the degree of deformation increases. One common approach to modeling deformable objects is the Mass-Spring (MS) system method. Mass-Spring systems are attractive to real-time applications due to their relatively low computational requirement and ease of implementation. However, their parameter determination is typically done manually, which becomes tedious when accurate approximation to real-world objects is desired. This …

Bottleneck Analysis Of Cports, Sreekalyana Chakravarthy Kajuluri

Electrical & Computer Engineering Theses & Dissertations

CPortS is a transportation logistics simulation that models the flow of military cargo through a seaport and the interaction of the cargo with the port resources and infrastructure. It provides information about the seaport's capabilities, how the cargo has been handled, how many days the cargo took to clear a particular port area, and the overall throughput of the seaport. The model is highly data intensive since it models the huge traffic in a real seaport.

Bottlenecks reduce system performance. Systems that are traffic intensive or simulations of systems, which are data intensive, encounter bottlenecks, which reduce their performance. In …

Functional Model Of The Army's Initial Capabilities Training Plan (Ictp) Generation Process (Transitioning To A Knowledge-Base Enterprise), Bryon Keith Hartzog

Computational Modeling & Simulation Engineering Theses & Dissertations

Background: The Army's transformation of its requirements and acquisition process to the Joint Capabilities Integration Development System (JCIDS), supporting the paradigm shift from a threat-based to capabilities-based methodology, signifies that the training/ training support business processes must also change. The new Capabilities Integration Development System - Army (CIDS-A) will prevent the development of service-only oriented materiel solutions that do not interoperate. Additionally, the CIDS-A will force early analysis across the Doctrine, Organization, Training, Leader, Material, Personnel, and Facilities (DOTLMPF) focus areas. This early DOTLMPF analysis ensures materiel solutions incorporate dynamic and flexible training/ training support. To efficiently manage the training …

Interactive Land Use Vrml Application Using Servlet Assist, Suresh Chitithoti

Electrical & Computer Engineering Theses & Dissertations

The integration of VRML and Servlet technologies has the potential to revolutionize web-based simulation visualization. The Interactive Land Use VRML Application (ILUVA) uses Java Servlets enabling one to perform urban planning by taking a virtual land area and add buildings, roadways, landscaping, and other features. The Virtual Reality Modeling Language (VRML) is a web-based technology for specifying and delivering interactive three-dimensional visualizations over a browser. The Java Servlet technology offers several powerful capabilities such as user authentication, session management, database connectivity for maintaining several possibly simultaneous user sessions, and dynamically generated VRML. Save and restore capabilities for any applications are …

Creating Enterprise Simulations Using High Level Architecture, Anton R. Lidums

Electrical & Computer Engineering Theses & Dissertations

Despite an established need, there are two remaining roadblocks to building distributed simulations and enterprise simulation systems. First, commercial simulation packages and engineering modeling tools are not readily distributable across multiple computers and have traditionally had very little impetus for utilizing a distributable format. Second, although HLA simulations have been built and there are tools to facilitate those efforts, very little has been done or written that specifically describes a "non-standard" integration implementation in sufficient detail to make the process reusable or repeatable. This thesis introduces a proof of concept prototype that was developed to integrate simulations. The paper presents …