Computational Engineering Commons^™

Resources Based Planning Framework For Infrastructure Maintenance And Rehabilitation Projects, Heba Gad

Theses and Dissertations

Infrastructure maintenance and rehabilitation projects involve activities scattered over a large geographical area (e.g., scattered road segments maintenance, telecom towers maintenance program, etc.). Planning such projects require a resource-based approach that accounts for the implications of resource mobility between activities’ locations in terms of time & cost. Existing scheduling techniques fall short of addressing the unique challenges of the scattered nature of these projects in combination with organization's limited resources availability. To address this need, this research presents a resources-based planning framework for infrastructure maintenance and rehabilitation scattered projects with the objective of enhancing resources utilization achieving time and cost …

Explainable Physics-Informed Deep Learning For Rainfall-Runoff Modeling And Uncertainty Assessment Across The Continental United States, Sadegh Sadeghi Tabas

All Dissertations

Hydrologic models provide a comprehensive tool to calibrate streamflow response to environmental variables. Various hydrologic modeling approaches, ranging from physically based to conceptual to entirely data-driven models, have been widely used for hydrologic simulation. During the recent years, however, Deep Learning (DL), a new generation of Machine Learning (ML), has transformed hydrologic simulation research to a new direction. DL methods have recently proposed for rainfall-runoff modeling that complement both distributed and conceptual hydrologic models, particularly in a catchment where data to support a process-based model is scared and limited.

This dissertation investigated the applicability of two advanced probabilistic physics-informed DL …

Machine Learning-Based Data And Model Driven Bayesian Uncertanity Quantification Of Inverse Problems For Suspended Non-Structural System, Zhiyuan Qin

All Dissertations

Inverse problems involve extracting the internal structure of a physical system from noisy measurement data. In many fields, the Bayesian inference is used to address the ill-conditioned nature of the inverse problem by incorporating prior information through an initial distribution. In the nonparametric Bayesian framework, surrogate models such as Gaussian Processes or Deep Neural Networks are used as flexible and effective probabilistic modeling tools to overcome the high-dimensional curse and reduce computational costs. In practical systems and computer models, uncertainties can be addressed through parameter calibration, sensitivity analysis, and uncertainty quantification, leading to improved reliability and robustness of decision and …

An Artificial Intelligence Tool For The Selection Of Delay Analysis Technique In Construction, Mostafa Farouk

Theses and Dissertations

The increasing complexity and magnitude of projects impose greater impact of delays on stakeholders. Construction delays are a major source of disputes in construction projects. Since a construction project depends on interactions and shared responsibilities among parties, research works were directed toward identifying delay causes, quantifying their impacts, and proposing ways to deal with them. Several delay analysis techniques (DATs) are available, but when applied to the same project’s delays provide different results. Thus, the selection of the DAT to use in evaluating delays becomes vital. Reviewing the literature, it has been realized that often there are disagreements, which lead …

Development And Prediction Of A Construction Price Index In Egypt, Mohamed Ramadan

Theses and Dissertations

Cost overrun is one of the most recurring issues in the Egyptian construction industry. The effect is not only on the construction industry ,but also influences the overall economy of a country like Egypt. Therefore, a construction performance index and a construction price index could be an integral indicator of the performance of the industry. These indices can reduce construction companies’ losses and decrease the effect of any sudden economic depression on the construction industry. Several research were conducted to predict construction indices. However, many uncertainties disturb the prediction of these indices. The trend in the prediction models for construction …

A Theoretical And Computational Model For Aquaponics Systems, Isabella M. Digiulio

Honors Theses

Aquaponics, a sustainable farming technique combining the principles of aquaculture and hydroponics, suffers from uncertainty in its optimal operating conditions, preventing large-scale adoption of this technology. Relying on experimentation or full-scale testing to address these uncertainties is an approach that is material, labor, time, and cost intensive. As a result, aquaponics would benefit from a complete computational model of the system. This would allow for information to be gained without long and expensive experiments, but rather with knowledge of system operations and a modeling software package. In this study, the Activated Sludge Model 1 (ASM1) matrix framework, traditionally used in …

How Can Visual Programing Be Used To Aid The Development Of A Structural Scheme Design Process Utilising Geometric Data Within An Architectural Revit Model?, Ed Carthy, Kieran Lakhera O'Shea

Reports

The early-stage structural scheme design of a building is a complex task requiring the collection of multiple information categories such as geometry, loading and materials. The collection and review of this information is traditionally conducted in a 2D environment. This is inefficient, time-consuming, and tedious. This paper provides a review of how structural engineers’ understanding and implementation of BIM has evolved significantly in recent years, validated by extant literature in areas such as BIM automation, visual programming, and structural optimisation in the structural engineering sector. Structural engineers are growing more aware that BIM provides a vast repository of data to …

Development Of A Framework To Support Community-Scale Nutrient Recovery For Local Crop Fertilization And Production, Scott A. Lopez

Graduate Theses, Dissertations, and Problem Reports (ETD)

Nutrient and resource recovery (NRR) has become increasingly crucial as regions face deteriorating sanitation infrastructures, limited support, and growing environmental challenges. Implementing region-specific NRR technologies and systems could provide effective circular economy insights into addressing these challenges. Because of the multidisciplinary challenges associated with the design and implementation of NRR strategies, various government and local decision-makers need to collaborate effectively in the decision-making process. Structured decision-making (SDM) methodologies are practical when determining the most appropriate NRR strategy for nutrient-rich waste streams. However, applications of computational SDM limited because of the vast amounts of data that are needed to analyze the …

Energy Dissipation In A Sand Damper Under Cyclic Loading, Ehab Sabi

Civil and Environmental Engineering Theses and Dissertations

Various seismic and wind engineering designs and retrofit strategies have been in development to meet structures' proper and safe operation during earthquake and wind excitation. One such method is the addition of fluid and particle dampers, such as sand dampers, in an effort to reduce excessive and dangerous displacements of structures. The present study implements the discrete element method (DEM) to assess the performance of a pressurized sand damper (PSD) and characterize the dissipated energy under cyclic loading. The idea of a PSD is to exploit the increase in shearing resistance of sand under external pressure and the associated ability …

Influence Of Emotional Intelligence And Leadership Behavior In The Construction Industry., Zeeshan Akther Mohammed

Harrisburg University Dissertations and Theses

This thesis explores the relationship between emotional intelligence (EI), work engagement, and project success among mid-level management in the construction industry. Multiple sources, including journals and research papers, were examined to establish the importance of EI and its impact on work engagement. The study aims to provide a comprehensive understanding of EI and its influence on the work engagement of mid-level employees. The findings highlight the correlation between EI and work engagement, quantifying the threshold of EI required for optimal contribution to organizational success. The research questions address the relationship between EI and work engagement in the construction industry, as …

Mango Surface Color Features Measurement Using Digital Image Processing, Md Towfiqur Rahman, Goutom Kumar, Md Abdul Momin

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Summary

Postharvest processing of agricultural produce is still done the conventional way in Bangladesh. Manual grading of agricultural produce, especially fruits and vegetables, is laborious and costly due to acute shortage of labor during the peak season, as well as difficulty maintaining the product quality. Machine vision system (MVS) applications are widely used nowadays as a non-destructive and cost-effective technology for automatically grading and sorting large volumes of produce in the packing house according to size, shape, color, texture, and surface defects. In this study, a simple MVS was constructed measuring different color features of mango fruit surface as a …

Dynamic Response Of Elastic Two-Story Steel Moment Frame Scaled Structure Equipped With Viscous Dampers, Garrett L. Barker, Alexander L. Poirier

Architectural Engineering

The authors of this report are Architectural Engineering undergraduate students at California Polytechnic State University, San Luis Obispo. Damping is a complex, experimentally derived value that is affected by many structural properties and has a profound effect on the dynamic response of structures. Deducing the inherent damping of a steel moment frame and affecting the damping ratio with viscous dampers are two topics explored in this paper. Dampers are commonly implemented in resilient structures that perform better in a design basis earthquake, reducing the seismic cost and downtime. Undergraduate coursework does not delve into the factors that affect damping and …

Single-Pass Inline Pipeline 3d Reconstruction Using Depth Camera Array, Zhexiong Shang, Zhigang Shen

Department of Construction Engineering and Management: Faculty Publications

A novel inline inspection (ILI) approach using depth cameras array (DCA) is introduced to create high-fidelity, dense 3D pipeline models. A new camera calibration method is introduced to register the color and the depth information of the cameras into a unified pipe model. By incorporating the calibration outcomes into a robust camera motion estimation approach, dense and complete 3D pipe surface reconstruction is achieved by using only the inline image data collected by a self-powered ILI rover in a single pass through a straight pipeline. The outcomes of the laboratory experiments demonstrate one-millimeter geometrical accuracy and 0.1-pixel photometric accuracy. …

Computational Study Of Dense Gas Dispersion In Urban Areas, Rasna Sharmin

All Dissertations

A series of steady-state simulations have been conducted to investigate removal of dense gas from a simple square canyon formed between two square cross-section obstacles. Due to urbanization and industrialization, there always lies a high risk of exposure to harmful pollutants which can result from accidental release of toxic gasses. Those are often denser than the atmosphere. and can easily get trapped in between buildings in urban canopies. It is important to have full understanding of flushing mechanism of dense fluid inside urban canopies by steady turbulent flow because the exposure to these toxic dense gasses can be catastrophic. There …

Strain-Based Design Of Steel-Polymer-Steel Composite Pipes, Vul Thang

LSU New Orleans Theses and Dissertations

Many offshore single-wall pipelines and structural failures have occurred in the past. As a result, lives were lost, and billions of dollars were spent. In addition, natural disasters such as earthquake fault zones can cause a large volume of soil movement. This can easily damage single-wall pipelines or piles of fixed offshore platforms in the earthquake fault zone.

Currently, the single-wall pipelines are used for the offshore and onshore oil and gas industry. This research investigated the use of double-wall composite pipe steel-polymer-steel (SPS) in place of single-wall pipe to prevent such failures. The double-wall composite pipe has a larger …

Development Of Guidelines For Collecting Transit Ridership Data, Hong Yang, Kun Xie, Sherif Ishak, Qingyu Ma, Yang Liu

Computational Modeling & Simulation Engineering Faculty Publications

Transit ridership is a critical determinant for many transit applications such as operation optimizations and project prioritization under performance-based funding mechanisms. As a result, the quality of ridership data is of utmost importance to both transit administrative agencies and transit operators. Many transit operators in Virginia report their ridership data to the Department of Rail and Public Transportation (DRPT) and the National Transit Database (NTD). However, with no specific guidelines available to transit agencies in Virginia for collecting ridership data, the heterogeneous mixture of diverse data collection methods and technologies has often raised concerns about the consistency and quality of …

Exploration Of Corridor-Based Tolling Strategies For Virginia’S Express Toll Lanes, Shanjiang Zhu, Mecit Cetin, Hong Yang, Olcay Sahin, Atabak Mardan

Civil & Environmental Engineering Faculty Publications

Virginia has invested significant resources in the development of express toll lanes (ETLs), which adjust toll rates dynamically based on the level of toll lane usage. A tool is needed to investigate the potential impact of the I-66 Outside-the-Beltway (OTB) ETLs on regional traffic patterns. This study developed a microscopic traffic simulation model in TransModeler to evaluate a set of corridor-based tolling strategies for the I-66 ETLs in NOVA. This model also considered the changes in vehicle occupancy, mode split, and departure time among travelers because of tolls based on locally collected data. An interactive map-based analyzer based on the …

Incorporating The 10th Edition Institute Of Traffic Engineers (Ite) Trip Generation Rates Into Virginia Department Of Transportation Guidelines, Kun Xie, Mecit Cetin, Hong Yang, Xiaomeng Dong

Civil & Environmental Engineering Faculty Publications

The Institute of Transportation Engineers (ITE) released the Trip Generation (TG) 10th edition in 2017, which significantly updated its database, and some of its trip generation rates were substantially lower than those of earlier editions. This study aims to investigate the applicability of the TG 10th edition in various Virginia contexts and to recommend how to incorporate the TG 10th edition into state guidelines. The research team surveyed 31 state transportation agencies to obtain a clear understanding of current practices in the adoption of trip rates and trip estimation approaches. We systematically compared trip rates of TG 9th and 10th …

Computational Design Of Nonlinear Stress-Strain Of Isotropic Materials, Askhad M.Polatov, Akhmat M. Ikramov, Daniyarbek Razmukhamedov

Chemical Technology, Control and Management

The article deals with the problems of numerical modeling of nonlinear physical processes of the stress-strain state of structural elements. An elastoplastic medium of a homogeneous solid material is investigated. The results of computational experiments on the study of the process of physically nonlinear deformation of isotropic elements of three-dimensional structures with a system of one- and double-periodic spherical cavities under uniaxial compression are presented. The influence and mutual influence of stress concentrators in the form of spherical cavities, vertically located two cavities and a horizontally located system of two cavities on the deformation of the structure are investigated. Numerical …

Assessment Of Contract Terms And Conditions For Lump-Sum Contracts, Omar Othman

Theses and Dissertations

A Contract is a tool that defines the obligations of the contracting parties and assigns the risk between them. Contracts are usually drafted to meet the interests of the owner by addressing the legal issues and liabilities. Meanwhile, less emphasis is placed on clearly communicating the contract terms and ensuring that all contracting parties comprehend their risks and obligations. In a country like Egypt, which has faced drastic economic and political changes in the past few years, and yet is experiencing a boom in the construction sector, many developers tend to draft contracts that might be legally complicated or lacks …

Context-Aware Sensing And Fusion For Structural Health Monitoring And Night Time Traffic Surveillance, Xinxiang Zhang

Electrical Engineering Theses and Dissertations

Rapid developments in computer vision technologies have been transforming many traditional fields in engineering and science in the last few decades, especially in terms of diagnosing problems from visual images. Leveraging computer vision technologies to inspect, monitor, assess infrastructure conditions, and analyze traffic dynamics, has gained significant increase in both effectiveness and efficiency, compared to the cost of traditional instrumentation arrays to monitor, and manually inspect civil infrastructures and traffic conditions. Therefore, to construct the next-generation intelligent civil and transportation infrastructures, this dissertation develops a comprehensive computer-vision based sensing and fusion framework for structural health monitoring and intelligent transportation systems. …

Renewable Energy Production By Solar Chimney: The Influence Of Curved Guide Vanes On The Performance Of A Solar Chimney Using Cfd Simulation, Haokun Xue

Theses, Dissertations and Capstones

The aim of this study is to investigate the effect of the guide vanes on the efficiency of the turbine of solar chimney power plant using Computational Fluid Dynamics (CFD). In this study, a 3-Dimentional CFD simulation of solar chimney power plant based on the Manzanares prototype is performed. The CFD simulation is validated by comparing the experimental data from the Manzanares prototype and simulation data with both 2D and 3D cases. To capture turbulent flow inside the chimney, the SST 𝑘 − 𝜔 turbulence model is used. The first object is to investigate the flow performance under the influence …

Review Of Forecasting Univariate Time-Series Data With Application To Water-Energy Nexus Studies & Proposal Of Parallel Hybrid Sarima-Ann Model, Cory Sumner Yarrington

Graduate Theses, Dissertations, and Problem Reports (ETD)

The necessary materials for most human activities are water and energy. Integrated analysis to accurately forecast water and energy consumption enables the implementation of efficient short and long-term resource management planning as well as expanding policy and research possibilities for the supportive infrastructure. However, the integral relationship between water and energy (water-energy nexus) poses a difficult problem for modeling. The accessibility and physical overlay of data sets related to water-energy nexus is another main issue for a reliable water-energy consumption forecast. The framework of urban metabolism (UM) uses several types of data to build a global view and highlight issues …

Impacts Of Using Tubular Sections In Open Web Steel Joists, Hollis (Cas) L. Caswell V

Honors Theses

Open web steel joists are lightweight structural trusses used in place of I-beams to support long-span floors and roofs of open space buildings. Their slender geometry makes them highly efficient in resisting flexure, but susceptible to out-of-plane buckling in a failure mode known as lateral-torsional buckling. This failure can be avoided by running lateral bracing between joists called bridging or potentially by using tubular sections to build up the joists rather than angle sections.

It is possible that a joist design using tubular cross-sections could require less bridging and prevent the need to use erection bridging for initial joist construction. …

An Accurate And Efficient Methodology To Obtain Surges For Risk Analyses For The Coast Of Bangladesh, A S M Alauddin Al Azad

UNF Graduate Theses and Dissertations

Bangladesh is one of the worst affected countries in the world in terms of tropical cyclone and storm surge effects. Until now, most of the research on annual exceedance of flood elevation for the coast of Bangladesh was based upon historical cyclone tracks along the coast. One of the major constraints of using historical tracks or tide gauge data to determine the annual exceedance of surge elevation is that the available sample size is often inadequate to capture the broad range of storm characteristics over the geographic region of interest. Over the years, several methods have been developed to increase …

Bibliometric Survey On Effects Of Climate Change On Incidences Of Infectious Diseases, Seema Harshad Patil, Yatharth Jain, Vedant Marathe

Library Philosophy and Practice (e-journal)

^{For understanding the influx of Infectious Diseases, research of climate change and its effects pertaining to the diseases is important. The motive of this bibliometric survey is to understand the research which has been carried out regarding the aforementioned topics. This paper summarizes the research in the 21st Century from 2001 to present. We conducted this analysis using tools such as Gephi, Researchgate, Scopus, ScienceScape, Google Scholar and Mapchart. This Bibliometric Survey on “Effects of Climate Change on Infectious Diseases” showed that maximum publications are articles. These publications are from conferences and journals related to Environmental Science. The United States …}

Expanding The Concept Of Comprehensive Area Ratio Parameter To The South-Central States Towards Simplifying The Structural Evaluation Of Flexible Pavements At The Network Level, Nitish R. Bastola

Civil Engineering Theses

The surface deflection bowl data collected through Non-Destructive Testing (NDT) has been widely utilized by various Department of Transportation (DOTs) in the South-Central States and other places. The primary purpose of using deflection-based NDTs in network-level assessment is to identify a weak pavement section that requires further analysis at the project level. The falling weight deflectometer (FWD) test is one of the common NDT based tests utilized by highway agencies in assessing the performance of the flexible pavement. However, a robust method to evaluate pavement sections utilizing FWD data from all the sensors are seldom developed. There is always a …

Laboratory Testing And Mechanistic Analysis Of Treated Subgrade Soils, Hari Kumar Reddy Yarrapureddi

Civil Engineering Theses

Calcium-based stabilizing agents such as cement and lime have been extensively used to improve the engineering properties of base and subgrade layers of pavement systems. Recently, polymers and chemical stabilizers have become popular due to cost efficiency, ease of application, and fast curing times. In this study, California Bearing Ratio (CBR) values of polymer and chemical treated soils were compared with the CBR values of soils treated with conventional stabilizers. Parametric sensitivity analyses was carried out on key parameters including the type of subgrade soil, stabilizing agent, stabilizing agent treatment levels, and moisture conditioning. Additionally, numerical analyses was performed to …

Assessing The Prevalence Of Suspicious Activities In Asphalt Pavement Construction Using Algorithmic Logics And Machine Learning, Mostofa Najmus Sakib

Boise State University Theses and Dissertations

Quality Control (QC) and Quality Assurance (QA) is a planned systematic approach to secure the satisfactory performance of Hot mix asphalt (HMA) construction projects. Millions of dollars are invested by government and state highway agencies to construct large-scale HMA construction projects. QC/QA is statistical approach for checking the desired construction properties through independent testing. The practice of QC/QA has been encouraged by the Federal Highway Administration (FHWA) since the mid 60’s. However, the standard QC/QA practice is often criticized on how effective such statistical tests and how representative the reported material tests are. Material testing data alteration in the HMA …

Automatic Delamination Segmentation For Bridge Deck Based On Encoder-Decoder Deep Learning Through Uav-Based Thermography, Chongsheng Cheng, Zhexiong Shang, Zhigang Shen

Department of Construction Engineering and Management: Faculty Publications

Concrete deck delamination often demonstrates strong variations in size, shape, and temperature distribution under the influences of outdoor weather conditions. The strong variations create challenges for pure analytical solutions in infrared image segmentation of delaminated areas. The recently developed supervised deep learning approach demonstrated the potentials in achieving automatic segmentation of RGB images. However, its effectiveness in segmenting thermal images remains under-explored. The main challenge lies in the development of specific models and the generation of a large range of labeled infrared images for training. To address this challenge, a customized deep learning model based on encoder-decoder architecture is proposed …