Structural Engineering Commons^™

Columbus, Nebraska: Southern Housing Development Design Proposal, Ryan Weyers, Caiden Dynek, Alex Papa, Brexton Robertson, Kaden Perala

Honors Theses

The following paper proposes the design and creation of a new housing development in the city of Columbus, Nebraska in a lot to the south of the city and directly north of the Columbus wastewater treatment plant. The goal of this proposal is to provide readers with confidence that our company is the most qualified to complete the project and will create the safest, most comfortable, most efficient, and most cost-effective final design. This proposal seeks to offer a solution to the lack of affordable housing for the growing workforce in Columbus. In order to arrive at this solution, each …

Assessing The Vertical Displacement Of The Grand Ethiopian Renaissance Dam During Its Filling Using Dinsar Technology And Its Potential Acute Consequences On The Downstream Countries, Hesham El-Askary, Amr Fawzy, Rejoice Thomas, Wenzhao Li, Nicholas Lahaye, Erik Linstead, Thomas Piechota, Daniele Struppa, Mohamed Abdelaty Sayed

Mathematics, Physics, and Computer Science Faculty Articles and Research

The Grand Ethiopian Renaissance Dam (GERD), formerly known as the Millennium Dam, is currently under construction and has been filling at a fast rate without sufficient known analysis on possible impacts on the body of the structure. The filling of GERD not only has an impact on the Blue Nile Basin hydrology, water storage and flow but also poses massive risks in case of collapse. Rosaries Dam located in Sudan at only 116 km downstream of GERD, along with the 20 million Sudanese benefiting from that dam, would be seriously threatened in case of the collapse of GERD. In this …

Flood Hazard Assessment For The Tori Levee Breach Of The Indus River Basin, Pakistan, Babar Naeem, Muhammad Azmat, Hui Tao, Shakil Ahmad, Muhammad Umar Khattak, Sajjad Haider, Sajjad Ahmad, Zarif Khero, Christopher R. Goodell

Civil and Environmental Engineering and Construction Faculty Research

Levee breaches are some of the most common hazards in the world and cause the loss of lives, livelihoods, and property destruction. During the 2010 flood in Pakistan, the most devastating breach occurred at Tori Levee on the right bank of the Indus River, downstream of the Guddu Barrage, which caused residual floods in northern Sindh and the adjoining regions of the Balochistan province. In this study, 2D unsteady flow modeling performed for Tori Levee breach computed residual flood inundation by coupling a HEC-RAS (Hydrological Engineering Centre-River Analysis System) 2D hydraulic model with remote sensing and Geographic Information System techniques. …

Structural Vulnerability Of Coastal Bridges Under Extreme Hurricane Conditions, Arturo Montoya, Adolfo Matamoros, Firat Testik, Reza Nasouri, Adnan Shahriar, Arsalan Majlesi

Data

Corresponding data set for Tran-SET Project No. 18STTSA04. Abstract of the final report is stated below for reference:

"This work presents the results of a numerical study evaluating the response of coastal bridges due to hurricane-induced waves. The analyses were conducted using the Coupled Eulerian-Lagrangian (CEL) approach, available on the commercial finite element software Abaqus, which allows modeling the interaction between water and the bridge. The work concentrated on (1) establishing an approach for modeling the desired wave characteristics (i.e., wave height, and frequency) within the CEL simulation, (2) conducting simulations using actual bridge dimensions of historically damaged bridges, (3) …

Structural Vulnerability Of Coastal Bridges Under Extreme Hurricane Conditions, Arturo Montoya, Adolfo Matamoros, Firat Testik, Reza Nasouri, Adnan Shahriar, Arsalan Majlesi

Publications

This work presents the results of a numerical study evaluating the response of coastal bridges due to hurricane-induced waves. The analyses were conducted using the Coupled Eulerian-Lagrangian (CEL) approach, available on the commercial finite element software Abaqus, which allows modeling the interaction between water and the bridge. The work concentrated on (1) establishing an approach for modeling the desired wave characteristics (i.e., wave height, and frequency) within the CEL simulation, (2) conducting simulations using actual bridge dimensions of historically damaged bridges, (3) analyzing a range of foundation flexibilities to determine its effect on the uplift and shear forces acting on …

Urban Underground Infrastructure Monitoring Iot: The Path Loss Analysis, Abdul Salam, Syed Shah

Faculty Publications

The extra quantities of wastewater entering the pipes can cause backups that result in sanitary sewer overflows. Urban underground infrastructure monitoring is important for controlling the flow of extraneous water into the pipelines. By combining the wireless underground communications and sensor solutions, the urban underground IoT applications such as real time wastewater and storm water overflow monitoring can be developed. In this paper, the path loss analysis of wireless underground communications in urban underground IoT for wastewater monitoring has been presented. It has been shown that the communication range of up to 4 kilometers can be achieved from an underground …

Unl-Cc Outdoor Education Center Master Plan, Marie Wagner

Honors Theses

The following report contains the work done by the group Griswold Engineering in completion of the Senior Design requirements for Civil Engineering and the Honors Requirements of the Project Manager. As the project manager, my job was to organize the project as a whole and to work alongside the Structural Engineer on the project. One of the main problems to overcome was the division of labor amongst the group. The project was originally conceived as a group project with one project manager and five other students to serve as the project engineers in each subdiscipline. Since this group only had …

Civil Engineering Design Of Cornhusker Council's Outdoor Education Center, Kelly Weiler

Honors Theses

A team of geotechnical, structural, hydraulic, environmental, and transportation experts collaborated to provide engineering solutions to the Cornhusker Council in an effort to solve the current problems facing their Outdoor Education Center. This results of this project provided the structural design of three bridges on the property, transportation plans for two parking lots and roadway design, geotechnical recommendations for soil testing and erosion prevention, and an environmental and hydraulic analysis of the property. A major challenge in the design of this project is the consideration of the dangers and regulations that accompany the floodway and floodplain regions on site. Various …

Bicp Global Bim Study - Lessons For Ireland’S Bim Programme, Barry Mcauley, Alan Hore, Roger West

Reports

The Construction IT Alliance (CitA) has been promoting the benefits of digitisation in the construction and engineering industry in Ireland since its formation back in 2002. Whilst the Alliance has always strived to ensure that its members are exposed to a wide spectrum of contemporary digital tools and processes, the concept of Building Information Modelling (BIM) has dominated the focus of its activities over the past five years.

BIM can be described as a digital tool that facilitates everybody to better understand a building or structure through the use of a digital model which draws on a range of data …

Augusta Me: The New Bridge Begets A New Planned Neighborhood, Molly Pulsifer, Richard Barringer

Planning

Construction of a new Third Bridge over the Kennebec River in Augusta offered the prospect of a new and handsome gateway to the city. Further, the resulting change in traffic patterns offered the City the chance to plan for a pattern of development quite different from what the city had experienced for the past half-century. The case study describes the planning and construction of the new bridge and corridors that re-routed traffic out of Augusta’s downtown and older neighborhoods, and created the opportunity for planned development adjacent to the corridor created by the new bridge. It goes on to describe …

Advanced Water Distribution Modeling And Management, Thomas M. Walski, Donald V. Chase, Dragan A. Savic, Walter Grayman, Stephen Beckwith, Edmundo Koelle

Civil and Environmental Engineering and Engineering Mechanics Faculty Publications

Advanced Water Distribution Modeling and Management builds on Haestad Press’ Water Distribution Modeling book. Addressing the modeling process from data collection to application, Advanced Water Distribution Modeling and Management adds extensive material from an international team of experts from both academia and consulting firms and includes topics such as:

• In-depth coverage of optimization techniques for model calibration, system design, and pump operations.
• Advanced water quality modeling topics including tank mixing, water quality solution algorithms, sampling techniques, tracer studies, tank design, and maintenance of adequate disinfectant residuals.
• Integration of SCADA systems with water distribution modeling for estimating model demands, initial conditions, …

Water Distribution Modeling, Thomas M. Walski, Donald V. Chase, Dragan A. Savic

Civil and Environmental Engineering and Engineering Mechanics Faculty Publications

To effectively use water distribution models, the engineer must be able to link knowledge of basic hydraulic theory and the mechanics of the program with that of the operation of real-world systems. Water Distribution Modeling does just that.

Written by industry experts, it provides a practical resource for engineers and modelers that goes well beyond being a how-to guide for typing data into a computer program. It contains straightforward answers to common questions related both to modeling and to distribution systems in general.

This textbook walks the practicing engineer or student through the modeling process from start to finish — …

A Computer Program For Optimal Control Of Water Supply Pump Stations: Development And Testing, Donald V. Chase

Civil and Environmental Engineering and Engineering Mechanics Faculty Publications

This report presents an optimal control methodology designed to reduce the electrical consumption and operating costs at Army water supply pumping stations.

The methodology, contained in a computer program called Optimal Control of Pumping Stations (OCOPS), enables water utility managers and operators to reduce the electrical consumption at pumping stations while maintaining adequate storage and system pressures for fire protection. OCOPS can be applied to any water distribution system and is not limited to any number of pumps, pump stations, or storage tanks within the system.

The optimal control strategy developed is based on electricity unit charges, but can be …

Techniques For Improving Energy Efficiency At Water Supply Pumping Stations, Lindell Ormsbee, Thomas M. Walski, Donald V. Chase, Wayne W. Sharp

Civil and Environmental Engineering and Engineering Mechanics Faculty Publications

This report describes the application of methods presented in Engineer Technical Letter (ETL) "Energy Efficiency at Water Supply Pumping Stations'' to the Washington, DC, and vicinity water system.

Both the ETL and this report were prepared under the Water System Operation, Maintenance and Rehabilitation Work Unit (CWIS 31794) of the Water Supply and Conservation Research Program. The technical monitors for this program in the Office, Chief of Engineers, were Mr. James Ballif (DAEN-ECE-B) and Mr. Robert Daniel (DAEN-CWP-D). The work was conducted at the US Army Engineer (USAE) Waterways Experiment Station (WES), Vicksburg, Miss., and the University of Kentucky (UK) …

Technical Report El-88-18: Reliability Of The Federally Owned Water Main System, Donald V. Chase, Lindell Ormsbee, Thomas M. Walski

Civil and Environmental Engineering and Engineering Mechanics Faculty Publications

The reliability of the Federally Owned Water Main (FOWM) system was examined, and recommendations to improve system reliability are made. The existing FOWM system is very dependent upon three different pipe links.

The first and most important link is the Francis Scott Key Bridge river crossing. This link carries the entire FOWM supply, and if taken out of service, an alternate means of supply must be used. At present, the only alternate source of supply is through interconnections with the adjacent Arlington County, Virginia, system.

The second vital link is the 30-in. steel main which extends from the Key Bridge …