Structural Engineering Commons^™

Columbus, Nebraska: Southern Housing Development Design Proposal, Ryan Weyers, Caiden Dynek, Alex Papa, Brexton Robertson, Kaden Perala

Honors Theses

The following paper proposes the design and creation of a new housing development in the city of Columbus, Nebraska in a lot to the south of the city and directly north of the Columbus wastewater treatment plant. The goal of this proposal is to provide readers with confidence that our company is the most qualified to complete the project and will create the safest, most comfortable, most efficient, and most cost-effective final design. This proposal seeks to offer a solution to the lack of affordable housing for the growing workforce in Columbus. In order to arrive at this solution, each …

A Review Of Current Construction Guidelines To Inform The Design Of Rammed Earth Houses In Seismically Active Zones, David Thompson, Charles Augarde, Juan Pablo Osorio

Articles

Sustainability in the materials we use for construction is a prime concern, focusing on reducing the embodied energy and carbon footprints of the materials used. The cement used in concrete products is responsible for a significant proportion of Man's CO2 emissions and its production requires substantial energy input, as do fired clay products. For this reason, products formed from unfired earthen materials are of increasing interest and the current challenges include devising means of robust design for strength and to address durability concerns. One form of earthen construction that employs an in-situ method is rammed earth, and it is a …

The Living Breakwaters Pdr Efforts: Conceptual Scheduling, Calvin O. Walters Jr.

Publications and Research

On October 29, 2012, Superstorm Sandy caused nearly $19 billion in damages in New York City including 69,000 residential units across the five boroughs. This disaster precipitated a post-disaster-rebuilding (PDR) project including roughly $4.2 billion in a Community Development Block Grant allocated towards PDR projects. A portion of the grant was used to construct a living breakwater in Tottenville, Staten Island, consisting of a resiliency approach to risk reduction through erosion prevention, wave energy attenuation, and enhancement of ecosystems and social resiliency to improve resistance to storms for the community of Tottenville. The ridges of each breakwater are designed with …

Influence Of Foundation Damping On Offshore Wind Turbine Monopile Design Loads, Wystan Carswell, Sanjay R. Arwade, Jörgen Johansson, Don J. Degroot

Publications

The dynamic behavior of offshore wind turbines (OWTs) must be designed considering stochastic load amplitudes and frequencies from waves and mechanical loads associated with the spinning rotor during power production. The proximity of the OWT natural frequency to excitation frequencies combined with low damping necessitates a thorough analysis of sources of damping; of these sources of damping, least is known about the contributions of damping from soil-structure interaction (foundation damping). This paper studies the influence of foundation damping on cyclic load demand for monopile-supported OWTs considering the design situations of power production, emergency shutdown, and parked conditions. The NREL 5 …

North 14th Street Corridor Improvements Project, Ashley Nguyen, Samantha Corey, Maricela Paramo Reyes, Pooja Rajeev

Honors Theses

The following project report was a study of the North 14^th Street corridor ranging from Adams Street to Virginia Street conducted by University of Nebraska-Lincoln students for a senior design capstone project. Main focuses of the project were the intersection of Adams and 14^th Street and the 14^th Street bridges over Cornhusker Highway and Oak Creek. Study of this area included work in transportation, traffic, structural, geotechnical, water resources, and environmental engineering. However, this report done by students should not take the place of work done by licensed professional engineers.

This project was done in collaboration with …

Epoxy Glass Fiber Reinforced Plastic Dowel Splice For Prestressed Precast Concrete Pile, Saman Farhangdoust

FIU Electronic Theses and Dissertations

Due to limitations in operation, shipping difficulties, and unforeseen soil conditions, it often happens that splicing of precast-prestressed concrete pile (PPCP) segments has to be performed at the construction site to achieve longer lengths. In order to splice PPCPs, Glass fiber reinforced polymer (GFRP), Carbon Fiber Reinforced Polymer (CFRP), and Stainless Steel (SS) dowels can be used as corrosion-resistant bars. In addition to their durability and superb mechanical performance, GFRP bars show cost advantage when compared to other corrosion-resistant materials. The objective of this study is to investigate the flexural behavior and effectiveness of the GFRP dowel and compare its …

Workshop Outcomes Report: 1st International Workshop On Seismic Resilience Of Arctic Infrastructure And Social Systems, Majid Ghayoomi, Katharine Duderstadt, Alexander Kholodov, Alexander Shiklomanov, Matthew Turner, Elham Ajorlou

Faculty Publications

No abstract provided.

Internet Of Things For Sustainable Mining, Abdul Salam

Faculty Publications

The sustainable mining Internet of Things deals with the applications of IoT technology to the coupled needs of sustainable recovery of metals and a healthy environment for a thriving planet. In this chapter, the IoT architecture and technology is presented to support development of a digital mining platform emphasizing the exploration of rock–fluid–environment interactions to develop extraction methods with maximum economic benefit, while maintaining and preserving both water quantity and quality, soil, and, ultimately, human health. New perspectives are provided for IoT applications in developing new mineral resources, improved management of tailings, monitoring and mitigating contamination from mining. Moreover, tools …

Performance Of Drilled Shaft Under Combination Of Complicated Loads Under Hurricane Event, Jie Huang, Sazzad Bin-Shafique

Publications

This project includes experimental and numerical studies to investigate and assess the impact of vertical loads on a laterally loaded drilled shaft under various conditions. The experimental study includes lab testing and lab-scale load test to examine a drilled shaft subjected to vertical and lateral loads at a reduced scale. With the data obtained from the lab-scale testing, a numerical model was calibrated, which was used to perform a parametric study to scrutinize the effect of many possible factors such as soil stiffness, soil friction angle, and drilled shaft geometry. With all the factors considered in this study, the vertical …

Urban Underground Infrastructure Monitoring Iot: The Path Loss Analysis, Abdul Salam, Syed Shah

Faculty Publications

The extra quantities of wastewater entering the pipes can cause backups that result in sanitary sewer overflows. Urban underground infrastructure monitoring is important for controlling the flow of extraneous water into the pipelines. By combining the wireless underground communications and sensor solutions, the urban underground IoT applications such as real time wastewater and storm water overflow monitoring can be developed. In this paper, the path loss analysis of wireless underground communications in urban underground IoT for wastewater monitoring has been presented. It has been shown that the communication range of up to 4 kilometers can be achieved from an underground …

Unl-Cc Outdoor Education Center Master Plan, Marie Wagner

Honors Theses

The following report contains the work done by the group Griswold Engineering in completion of the Senior Design requirements for Civil Engineering and the Honors Requirements of the Project Manager. As the project manager, my job was to organize the project as a whole and to work alongside the Structural Engineer on the project. One of the main problems to overcome was the division of labor amongst the group. The project was originally conceived as a group project with one project manager and five other students to serve as the project engineers in each subdiscipline. Since this group only had …

Civil Engineering Design Of Cornhusker Council's Outdoor Education Center, Kelly Weiler

Honors Theses

A team of geotechnical, structural, hydraulic, environmental, and transportation experts collaborated to provide engineering solutions to the Cornhusker Council in an effort to solve the current problems facing their Outdoor Education Center. This results of this project provided the structural design of three bridges on the property, transportation plans for two parking lots and roadway design, geotechnical recommendations for soil testing and erosion prevention, and an environmental and hydraulic analysis of the property. A major challenge in the design of this project is the consideration of the dangers and regulations that accompany the floodway and floodplain regions on site. Various …

Bicp Global Bim Study - Lessons For Ireland’S Bim Programme, Barry Mcauley, Alan Hore, Roger West

Reports

The Construction IT Alliance (CitA) has been promoting the benefits of digitisation in the construction and engineering industry in Ireland since its formation back in 2002. Whilst the Alliance has always strived to ensure that its members are exposed to a wide spectrum of contemporary digital tools and processes, the concept of Building Information Modelling (BIM) has dominated the focus of its activities over the past five years.

BIM can be described as a digital tool that facilitates everybody to better understand a building or structure through the use of a digital model which draws on a range of data …

Interface Friction Parameters For The Mathematical Modeling Of Shell Structures With Infill, Alexander T. Bekker, Nikita Ya. Tsimbelman, Tatiana I. Chernova, Vadim D. Bruss, Ömer Bilgin

Civil and Environmental Engineering and Engineering Mechanics Faculty Publications

Thin metal or reinforced concrete shells with granular infill structures are considered in this article. These structures are massive and they are used as support for the construction of berthing quays, piers, artificial islands, shore protection, and other structures of coastal infrastructure. It is more convenient to use the thin shell structures during the development of the Arctic shelf, because it is possible to install them from the ice side. In addition, it is possible to enhance the technology and install thin shells with infill on deeper solid foundation layers. A mathematical model for the stresses on a compressible foundation …

Mathematical Model Of The Shell With The Infill For Retaining Structures, Alexander T. Bekker, Nikita Ya. Tsimbelman, Dmitriy A. Potyanikhin, Andrey I. Mamontov, Ömer Bilgin, Tatiana I. Chernova

Civil and Environmental Engineering and Engineering Mechanics Faculty Publications

A description of finite element model and analysis of a shell with an infill is performed. A large diameter thin cylindrical shell structure with the edge leaning against compressible foundation soil is analyzed. Different materials are considered individually for the models of each structure shell and infill component (metal or reinforced concrete shell, and granular or elastic infill in a shell and foundation soil loaded by the structure). Contact conditions between 1) the infill and the shell’s inner surface and 2) between the foundation material and the shell edge are analyzed. An example of calculating strain conditions in the shell …

A Model For Continuous Measurement Of Drilled Shaft Diameter During Construction, Masood Hajali

FIU Electronic Theses and Dissertations

Non-Destructive Testing (NDT) of deep foundations has become an integral part of the industry’s standard manufacturing processes. It is not unusual for the evaluation of the integrity of the concrete to include the measurement of ultrasonic wave speeds. Numerous methods have been proposed that use the propagation speed of ultrasonic waves to check the integrity of concrete for drilled shaft foundations. All such methods evaluate the integrity of the concrete inside the cage and between the access tubes. The integrity of the concrete outside the cage remains to be considered to determine the location of the border between the concrete …

Probabilistic Analysis Of Offshore Wind Turbine Soil-Structure Interaction, Wystan Carswell

Masters Theses 1911 - February 2014

A literature review of current design and analysis methods for offshore wind turbine (OWT) foundations is presented, focusing primarily on the monopile foundation. Laterally loaded monopile foundations are typically designed using the American Petroleum Institute (API) p-y method for offshore oil platforms, which presents several issues when extended to OWTs, mostly with respect to the large pile diameters required and the effect of cyclic loading from wind and waves. Although remedies have been proposed, none have been incorporated into current design standards. Foundations must be uniquely designed for each wind farm due to extreme dependence on site characteristics. The uncertainty …

Seamless Bridge And Roadway System For The U.S. Practice, Nima Ala

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Expansion joints are one of the main causes for high maintenance costs in bridges. The search for ideal expansion joints has proven fruitless. That is why it has been said that “the best joint is no joint”. A seamless bridge system is envisioned that results in bridges with long service lives by eliminating the joints over the entire length of the bridge, approach slab and a segment of the roadway called transition. All bridge thermal movements are dissipated to zero in the transition. The system is similar to a system developed in Australia but modifications had to be made to …

Site Response Zones And Short-Period Earthquake Ground Motion Projections For The Las Vegas Basin, Barbara Luke, Ying Liu

Civil and Environmental Engineering and Construction Faculty Research

A deterministic seismic hazard analysis was conducted to address the effect of local soil conditions on earthquake-induced strong ground motion in the Las Vegas Basin, Nevada (US). Using a large geological and geotechnical database, two response units were defined: a fine-grained unit, predominantly clay; and a coarse-grained unit, predominantly gravel. A moderate number of high-quality shallow shear wave velocity measurements were collected from which characteristic shear wave velocity profiles were developed for each response unit. An equivalent-linear one-dimensional site response model was used. The model was calibrated using a basin-wide, small-strain ground motion database. Calibration tests showed that ground motion …

Yucca Mountain Ventilation Studies Support And Associated Code Enhancements, George Danko

Publications (YM)

The Task 20 project was prematurely closed by DOE on the basis of becoming critical data to the Yucca Mountain project. Task 20 indeed delivered the first, published hydrothermal-ventilation model, MULTIFLUX V1.0 and V1.1 to BSC during 2001 to support the AMR Rev01 report. The numerical model is designed to predict temperature and humidity distributions in and around the emplacement drifts and on the waste packages stored in a ventilated, high-level nuclear waste repository.

Performance Comparison Of A Roundabout Versus Two-Way Stop Controlled (Twsc) Intersections, Deogratias Eustace

Civil and Environmental Engineering and Engineering Mechanics Faculty Publications

The superior safety record of modern roundabouts is well known in Western Europe, Australia and in most British-influenced countries around the world. The experience from a single modern roundabout installed in the City of Manhattan, Kansas, some three years ago, also shares the same experience. A major study of the performance of Manhattan, Kansas, modern roundabout was conducted at Kansas State University (KSU) and was co-sponsored by Mac-Blackwell National Rural Transportation Study Center, Kansas State University, and the City of Manhattan. The study examined three intersections, one modern roundabout and two Two-Way Stop Controlled (TWSC) intersections with similar traffic conditions. …

Techniques For Improving Energy Efficiency At Water Supply Pumping Stations, Lindell Ormsbee, Thomas M. Walski, Donald V. Chase, Wayne W. Sharp

Civil and Environmental Engineering and Engineering Mechanics Faculty Publications

This report describes the application of methods presented in Engineer Technical Letter (ETL) "Energy Efficiency at Water Supply Pumping Stations'' to the Washington, DC, and vicinity water system.

Both the ETL and this report were prepared under the Water System Operation, Maintenance and Rehabilitation Work Unit (CWIS 31794) of the Water Supply and Conservation Research Program. The technical monitors for this program in the Office, Chief of Engineers, were Mr. James Ballif (DAEN-ECE-B) and Mr. Robert Daniel (DAEN-CWP-D). The work was conducted at the US Army Engineer (USAE) Waterways Experiment Station (WES), Vicksburg, Miss., and the University of Kentucky (UK) …