Environmental Engineering Commons^™

International Information Management And Bim Best Practice Report, Ted Mckenna, Davitt Lamon

Reports

In order to inform the Digital Leadership and Cultural Change pillar of the Build Digital, a study of international best practice in digital adoption within the built environment sector globally was undertaken and is presented here-in. In order to identify key learnings for Ireland in the context of digital transformation, eight countries were included in this study, namely, Denmark, Finland, Netherlands, Germany, United Kingdom (UK), New Zealand, Australia and Singapore. These countries were selected for various reasons, including the level of digital maturity, the scale of the built environment sector and geographic spread. Key data for each country is included …

Sustainability And Circular Economy Horizon Scan And Needs Analysis, Sadaf Dalirazar, Mark Kelly, Derek Sinnott, James O'Donnell

Reports

The construction industry plays a crucial role in addressing the climate crisis as it is the largest global consumer of raw materials and contributes significantly to global energy consumption and emissions. Considering the world’s continuous population growth and the imperative to address infrastructure and housing demands the construction sector needs to adopt further sustainable strategies in its activities to reduce the pressure on natural resources. In addition, the Architecture, Engineering, and Construction (AEC) sector is responsible for generating substantial amount of waste known as Construction and Demolition Waste (CDW), which is projected to increase due to the future construction developments. …

Information Management And Bim Standards And Supports Inventory, Ryan Dempsey, Barry Mcauley, David Burke

Tools

The Digital Standards pillar consists of industry experts who champion the benefits of common rules, guidelines, and workflows that facilitate the improvement of information flow and information management across asset life cycles. Digital standards provide a common language that can be translated to technical specifications enabling clients, designers, contractors, and facilities managers, irrespective of their preferred tools, to communicate efficiently and reduce cost, rework, and disputes. Working closely with the Digital Procurement and Digital Education and Training pillars, this pillar is developing and delivering Irish Information Management/BIM (Digital Construction) guidelines for the sector.

This report summarises existing digital construction standards, …

Digital Construction Annual Survey 2022 Report, Davitt Lamon, Ted Mckenna

Reports

The Annual Survey 2022 was conducted to assess the state of digital transformation in the Irish construction and built environment sector. This report presents the analysis of survey data, with a focus on implications for the Build Digital project and Build Digital’s five pillars: Digital Leadership & Cultural Change, Digital Standards, Digital Education & Training, Digital Procurement, and Sustainability & Circular Economy. Key findings from the survey indicated that a significant number of organisations have started their digital transformation journey, with many identifying themselves as proactive and possessing a clear business-focused strategy. However, a considerable cohort of respondents are keen …

Using Bim To Increase The Efficiency Of Energy-Driven Retrofitting Projects, Anne Grego, Shannon Chance, Barry Mcauley

Conference Papers

The building sector is responsible for nearly 40% of global energy consumption. Many existing buildings have poor thermal insulation and low energy performance, hindering sustainability goals. Energy-driven building retrofitting could address this issue and implementing Building Information Modelling (BIM) in retrofitting can reduce process time, costs, and waste associated with such undertakings. Yet, there is a lack of research and insufficient guidance for implementing BIM in energy-driven retrofitting. A BIM framework is presented to enhance decision-making processes during retrofitting. The aims of this study were to (1) identify BIM technologies and methodologies that could address existing barriers and improve efficiency …

Virtual Accident Curb Risk Habituation In Workers By Restoring Sensory Responses To Real-World Warning, Namgyun Kim, Laurent Grégoire, Moein Razavi, Niya Yan, Changbum R. Ahn, Brian A. Anderson

Civil and Environmental Engineering and Engineering Mechanics Faculty Publications

In high-risk work environments, workers become habituated to hazards they frequently encounter, subsequently underestimating risk and engaging in unsafe behaviors. This phenomenon has been termed "risk habituation"and identified as a vital root cause of fatalities and injuries at workplaces. Providing an effective intervention that curbs workers' risk habituation is critical in preventing occupa-tional injuries and fatalities. However, there exists no empirically supported intervention for curbing risk habituation. To this end, here we investigated how experiencing an accident in a virtual reality (VR) environment affects workers' risk habituation toward repeatedly exposed workplace hazards. We examined an underlying mechanism of risk habituation …

Hdd Dataset: Optimising Retrofitted Insulation For Irish Residential Building Walls, Rakshit D. Muddu, Aimee Byrne, Anthony James Robinson

Datasets

In this study, a thermal-economic analysis was conducted to determine the optimum insulation thickness of retrofitted insulation walls in different regions in Ireland. This was based on the Heating Degree Day method (HDD). This dataset contains optimum insulation thickness, payback period, cost savings and carbon emission for all 25 counties in the Republic of Ireland

Survey Data: Optimising Retrofitted Insulation For Irish Residential Building Walls, Rakshit D. Muddu, Aimee Byrne, Anthony Robinson Dr.

Datasets

A survey was conducted to determine the preferred set point temperature and heating pattern among Irish households. The survey was sent to 237 people living across Ireland, out of which 32 respondents skipped the survey and 9 surveys were found to be incomplete. Amongst the counties in Ireland 71.1% respondents were from Dublin, 6.34% from Kildare, 5% from Meath, 5% from Wicklow and in all the remaining counties response rate was below 2%. Part 1: This section of the survey recorded information regarding characteristics of the building such as house type, wall type, insulation type, period the house was built. …

The Living Breakwaters Pdr Efforts Econcrete Resource Analysis, Guianina Ferrari, Shervon Stephens, Calvin O. Walters Jr.

Publications and Research

On October 29, 2012, Superstorm Sandy impacted 443,000 people and caused nearly $19 billion (about $58 per person in the US) worth of damage within New York City. As part of the New York City infrastructure reparation plan, the Living Breakwaters project in Tottenville addressed coastal resilience, allocating $100M of public funds to a series of artificial breakwaters by the southwest coast of Staten Island. Each breakwater is constructed and designed to mitigate water flow in storm events. ECOncrete, a primary element of the breakwater, is a specialty cast cementitious product that is marine organism-friendly that encourages biocalcification and photosynthesis. …

Data-Driven Analysis For Facility Management In Higher Education Institution, Ashish Kumar Pampana, Jungho Jeon, Soojin Yoon, Theodore J. Weidner, Makarand Hastak

Civil and Environmental Engineering and Engineering Mechanics Faculty Publications

Planned Preventive Maintenance (PPM) and Unplanned Maintenance (UPM) are the most common types of facility maintenance. This paper analyzes current trends and status of Facility Management (FM) practice at higher education institutions by proposing a systematic data-driven methodology using Natural Language Process (NLP) approaches, statistical analysis, risk-profile analysis, and outlier analysis. This study utilizes a descriptive database entitled "Facility Management Unified Classification Database (FMUCD)" to conduct the systematic data-driven analyses. The 5-year data from 2015 to 2019 was collected from eight universities in North America. A preprocessing step included but was not limited to identifying common data attributes, cleaning noisy …

Investigation Of Mechanical Properties Of Recycled Fiber-Reinforced Polymer Composites Reinforcing Cement, Caleb Mull, Fnu Archie, Harry Lee, Guyuan Zhang

Discovery Undergraduate Interdisciplinary Research Internship

The usage of fiber-reinforced polymer composites in various fields has increased significantly due to their advantageous physical and mechanical properties. However, the sustainability of composite parts has not been fully solved for a long time. Most end-of-life (EOL) composite parts have been landfilled without recycling due to the recycling cost and lack of application of recycled composites. Mechanical composite recycling that shred the EOL composite part and reuse it for downgraded applications is one of the most commonly used recycling processes for the EOL composite part. In this research, mechanical composite recycling process was demonstrated for the construction application. The …

Optimising Existing Digital Workflow For Structural Engineering Organisations Through The Partnering Of Bim And Lean Processes, John Mclaughlin, Barry Mcauley

Conference Papers

Building Information Modelling (BIM) is now seen as one of the leading transformative processes within the Architectural, Engineering and Construction (AEC) sector and has the potential to assist in streamlining the structural design process. However, its practical implementation can often add another layer to the existing workflow and can result, to its detriment, in the primary objective of optimising structural workflows being hindered. This can lead to structural organisations producing 3D models in tandem with traditional drawings, a lack of human intervention regarding software interoperability, and a reluctance to move away from conventional work methods. This paper will explore how …

The Living Breakwaters Pdr Efforts: Conceptual Scheduling, Calvin O. Walters Jr.

Publications and Research

On October 29, 2012, Superstorm Sandy caused nearly $19 billion in damages in New York City including 69,000 residential units across the five boroughs. This disaster precipitated a post-disaster-rebuilding (PDR) project including roughly $4.2 billion in a Community Development Block Grant allocated towards PDR projects. A portion of the grant was used to construct a living breakwater in Tottenville, Staten Island, consisting of a resiliency approach to risk reduction through erosion prevention, wave energy attenuation, and enhancement of ecosystems and social resiliency to improve resistance to storms for the community of Tottenville. The ridges of each breakwater are designed with …

Influence Of Foundation Damping On Offshore Wind Turbine Monopile Design Loads, Wystan Carswell, Sanjay R. Arwade, Jörgen Johansson, Don J. Degroot

Publications

The dynamic behavior of offshore wind turbines (OWTs) must be designed considering stochastic load amplitudes and frequencies from waves and mechanical loads associated with the spinning rotor during power production. The proximity of the OWT natural frequency to excitation frequencies combined with low damping necessitates a thorough analysis of sources of damping; of these sources of damping, least is known about the contributions of damping from soil-structure interaction (foundation damping). This paper studies the influence of foundation damping on cyclic load demand for monopile-supported OWTs considering the design situations of power production, emergency shutdown, and parked conditions. The NREL 5 …

Causes Influencing Construction Waste Generation During The Design Process: An Analytical Study, Aya Saad, Ayman Ahmed Ezzat Othman

Architectural Engineering

Despite the social and economic contributions of the construction industry towards achieving sustainable development objectives, it has an adverse effect on the environment such as the generation of waste, water, and energy consumption. Construction waste (CW) is the loss of materials that are produced during or after the construction process and has no remaining value. Several countries promote waste elimination plans at early stages to reduce CW at its source. The Egyptian government is expanding its investments in new mega projects and infrastructure facilities like new administrative capital, bridges, roads, energy projects which resulted in increasing the rate and amount …

Arise (Certcoin)- Inspiring Demand For Sustainable Energy Skills, Barry Mcauley, Paul Mccormack, Andrew Hamilton, Eduardo Rebelo

Conference papers

The European AEC Sector now faces impending challenges over the next decade concerning escalating climate targets. To reach these targets, it vital that the green economy deliver a better-skilled workforce and develops new competencies and methods of working. Training in the domain of digital construction technologies and processes, such as Building Information Modelling (BIM), are now seen as essential upskilling vehicles that must be embraced if the sector is to transition towards a greener agenda. To assist in meeting these training needs a selection of partners from the BIM EPA will partake in the Horizon 2020 ARISE project, aiming to …

An Exploration Of Lean And Bim Synergies With A Focus On Smes In Construction, Barry Mcauley, Marina Andreou, Alan V. Hore, Avril Behan

Conference papers

Small and Medium Enterprises (SME) account for 99.7% of the Irish Construction Industry and contribute to 68% of all employment in the sector. These organisations now find themselves facing the challenge of returning to productive business post the Covid 19 shutdown. More than ever, SMEs must modernise and adapt their business models to embrace new ways of working, such as Lean Construction and Building Information Modelling (BIM), in the absence of clear business incentives. It has proved difficult to persuade SMEs to change their ways of working due to limited finances, internal resources and above all, the cultural shift required …

Digital Construction And Bim Research In Ireland 2016-2020, Barry Mcauley, Roger P. West, Alan V. Hore

Conference papers

As the construction industry opens up post pandemic, new and significant challenges will demand considerable expertise, not least in financial viability, solving the housing crisis and facing the very significant climate change pressures to make the industry less wasteful and less carbon intensive. This presents an excellent opportunity to further inculcate aspects of lean construction, particularly BIM into many aspects of construction not traditionally associated with digital construction, provided the necessary expertise is available and known to exist. Following a well-received recent conference paper summarising BIM-related research published by academics in Ireland’s higher education institutions in 2020, this paper will …

Exploration Of The Sludge Biodiesel Pathway, Zachary Christman

Department of Agronomy and Horticulture: Dissertations, Theses, and Student Research

Wastewater sludge is an overlooked source of fat, oil, and grease (FOG) that could be converted into biodiesel. The United States produces about 8 million tons of sludge per year. The disposal cost for this amount of sludge is about 2 billion dollars. The widespread availability and low cost of sludge compared to other biodiesel raw materials make it an economical choice for a renewable fuel. Using sludge as a raw material can produce 25 to 30 mg per gram of fatty acid methyl ester (FAME); the main component of biodiesel. Sludge biodiesel has the potential of transforming a portion …

On The Computational Efficiency Of Les And Hybrid Rans-Les Models In Building Aerodynamics, Aly Mousaad Aly, Faiaz Khaled

Faculty Publications

Large-eddy simulation (LES) has proven to offer superior accuracy in regards to predicting surface pressures compared to the Reynolds-averaged Navier Stokes (RANS) models. However, the primary impediment is the high computational cost associated with LES. The authors attempt to investigate the computational cost and accuracy by employing different sub-grid scale (SGS) models in LES and hybrid RANS-LES models. One of the prerequisites of accurate pressure estimations is to ensure a horizontally homogeneous empty computational domain. This study aims to compare the computational competence qualitatively and quantitatively using an empty domain in regards to the ability to maintain horizontal homogeneity. The …

On The Computational Efficiency Of Les And Hybrid Rans-Les Models In Building Aerodynamics, Faiaz Khaled, Aly Mousaad Aly

Faculty Publications

No abstract provided.

Evaluating The Sustainability Of Infrastructure Projects During Front-End Planning Phase, Valentina Ferrer Rivero

FIU Electronic Theses and Dissertations

Front-End Planning (FEP) for Sustainable Infrastructure (SI) projects is a promising process that can support addressing multiple challenges in infrastructure projects (i.e. cost overruns, schedule delays, and poor sustainability). This study aims to investigate synergies between sustainability and FEP tools for infrastructures through stakeholders’ surveys, multiple case-study analyses, and a Problem-Based Learning (PBL) activity with students. The PBL activity enhanced students’ knowledge on FEP for SI projects, and, together with other analyses, it helped in defining three different frameworks that correlate sustainability and FEP tools for infrastructure projects. The findings of this thesis contribute to the infrastructure, engineering and construction …

A Critical Examination Of Visual Programming And Generative Design For The Compliance Checking Of Open Plan Office Layouts Against Hse Guidelines Post Covid-19., Bim Tudublin, Ronan Byrne

Capstone Reports

The purpose of this study is to explore the feasibility of Visual Programming (VP) and Generative Design (GD) in assisting employers review open plan office layouts against Ireland’s HSE guidelines implemented in May 2020 in response to Covid-19. The pandemic has affected all areas of life with workplace standards requiring a complete overhaul. This study will attempt to ascertain compliance with natural ventilation and social distancing requirements through the completion of an experimental research study, utilising Computational Design (CD) tools. A GD study will be undertaken to provide the designer with numerous office layout design solutions to evaluate and evolve. …

Opportunities In The Irish Reinforced Concrete Industry For Lean And Bim Adoption, Bim Tudublin, Kieran Mcconnell

Capstone Reports

The Irish Reinforced Concrete (RC) sector has yet to realise the full potential of Building Information Modelling (BIM) and Lean construction. The positive impacts and benefits of both BIM and Lean in the wider Architecture, Engineering and Construction sector are widely recognised; many of these are transferable to the RC sector, but there is limited research and knowledge on practical transference, uses and advantages. This research aims to fill some of the existing knowledge gaps by examining BIM and Lean adoption and awareness in the Irish RC sector across sub-sectors, professions, and organisational levels, and by exploring opportunities for increasing …

To What Extent Can Lean Construction Processes And Principles Be Utilised In The Design Stage Of A Bim Project In The Irish Design And Construction Industry, Bim Tudublin, Barry Sheramn

Capstone Reports

Although different in many ways, Building Information Modelling (BIM) and Lean Construction are two processes that are having a significant impact on the Design & Construction Industry. In recent years, the Irish AECO industry has seen a tenfold increase across numerous construction disciplines with the adoption of new workflows and processes centred around both BIM and Lean methodologies. Existing literature identifies a strong synergistic relationship between the two processes and highlights the opportunity for Lean processes and principles to be implemented into the design stage workflow. This paper investigated existing literature relating to several lean processes currently implemented in the …

Should Acoustic Simulation Technology Be Utilised In Architectural Practice? Does It Have The Potential For Bim Integration?, Bim Tudublin, Keith Harvey

Capstone Reports

The research presented in this paper, firstly, aims to convey the importance of our acoustic environment through focusing on the effects of undesirable acoustic conditions on cognitive abilities in spaces where cognitive performance is of the utmost concern, our learning environments. Secondly, it aims to investigate current state-of-the-art acoustic simulation methods, available platforms, and their levels of interoperability with architectural BIM authoring software. Structured interviews were carried out with 7 Irish architects and architectural technologists to determine if a disconnection between architectural design and acoustic performance exists and to identify the advantages and disadvantages of current workflows for acoustic performance …

A Method For Uncertainty Managementin Life Cycle Assessment Studies –A Tiered-Hybrid Case Study Of An Irish Construction Project, Deidre Wolff

Doctoral

Life Cycle Assessment (LCA) quantifies the potential environmental impact of a product system throughout its life cycle from raw material extraction, production, manufacture, use and maintenance through to final disposal. The results from LCA studies are often used to support decision-making processes andpolicy development. LCA is conducted in four iterative steps, beingGoal and Scope definition, Life Cycle InventoryAnalysis (LCI), Life Cycle Impact Assessment (LCIA), andInterpretation. The guidelines for each step are provided in the International Organization for Standardization (ISO) standards, ISO 14040:2006 and 14044:2006. Uncertainty arises in all steps of an LCA,yet the propagation and reporting of these uncertainties is …

A Novel Self-Healing System: Towards A Sustainable Porous Asphalt, Shi Xu, Xueyan Liu, Amir Tabakovic, Erik Schlangen

Articles

Self-healing asphalt, aimed to produce a sustainable asphalt pavement using green technology, has been studied in the past two decades. Technologies including encapsulated rejuvenator and induction heating have been proposed, demonstrated in the laboratory, and gradually evaluated in field application. This paper looks into the synergy effect of the above two technologies, where induction heating serves as the asphalt damage repair mechanism, requiring just 2 min heating time and encapsulated rejuvenator will replenish (rejuvenate) aged asphalt binder and reinstate bitumen’s healing ability. Moreover, the increased temperature from induction heating could in turn accelerate the diffusion process of rejuvenator into aged …

Finding Patterns In Subsurface Using Bayesian Machine Learning Approach, Wang Hui

Civil and Environmental Engineering and Engineering Mechanics Faculty Publications

Stochastic simulation approaches and uncertainty quantification are usually adopted for gaining insight into variability in soil stratigraphy configurations. Previous investigations at geotechnical site characterization and interpretation can be broadly categorized into geostatistics- and process-based methods. On the other hand, modern site exploration techniques provide high-quality, dense datasets in physical spaces with high resolution, either directly from sensors (for example, cone penetration testing data) or indirectly from geophysical inversion (such as seismic inversion, electromagnetic induction inversion, and ground penetrating radar). In this work, anisotropy and heterogeneity are considered as possible patterns that inherently exist in the observations, and these are inferred …

Wireless Underground Communications In Sewer And Stormwater Overflow Monitoring: Radio Waves Through Soil And Asphalt Medium, Usman Raza, Abdul Salam

Faculty Publications

Storm drains and sanitary sewers are prone to backups and overflows due to extra amount wastewater entering the pipes. To prevent that, it is imperative to efficiently monitor the urban underground infrastructure. The combination of sensors system and wireless underground communication system can be used to realize urban underground IoT applications, e.g., storm water and wastewater overflow monitoring systems. The aim of this article is to establish a feasibility of the use of wireless underground communications techniques, and wave propagation through the subsurface soil and asphalt layers, in an underground pavement system for storm water and sewer overflow monitoring application. …