Review And Experimental Demonstration Of The Concrete Maturity Method For Early Opening Of Arkansas Pavements, Chase Dykema

Graduate Theses and Dissertations

Many Department of Transportation (DOT) specifications across the United States require a minimum time to gain strength for concrete pavements before they can be opened to construction equipment or traffic. This period is anywhere from three to seven days. However, concrete pavements can often be opened earlier as long as a minimum required strength is attained. With the development of modern pavement mixes, this strength can often be achieved well before the required curing period has passed. Allowing contractors to open pavements earlier increases construction efficiency. One nondestructive method of proving a pavement has achieved the required strength is the …

Utilizing Waste Paper Ash As Partial Cement Replacement In Concrete, Karim Hassan

Thesis/ Dissertation Defenses

The concrete industry has a considerable environmental impact. The manufacture of ordinary Portland cement (OPC) emits a large amount of carbon dioxide, while the extensive extraction of virgin natural aggregates further burdens the environment during concrete production. This thesis is concerned with the development of low-carbon concrete through the combined utilization of waste paper ash (WPA), recycled aggregates, and accelerated carbonation curing. The main objective is to reduce the environmental footprint of concrete products, including masonry units, by enhancing their carbon sequestration potential, decreasing the use of cement, and alleviating reliance on virgin aggregates, while also maintaining adequate mechanical and …

International Construction In El Salvador, Daniel Roberts

Construction Management

My senior project focused on participating in international construction operations in El Salvador through hands-on involvement in the construction of a steel warehouse facility and a small residential home. The project emphasized structural concrete placement, field coordination, construction sequencing, and adaptation to regional construction practices. Work included assisting with concrete foundations, slab preparation, reinforcing steel placement, masonry work, and general site coordination activities. The experience provided practical exposure to labor productivity, material availability, scheduling challenges, and construction methods commonly used in developing regions. The project also highlighted the importance of communication, problem-solving, and flexibility when working in an international construction …

Ada Concrete Walkway Improvements At The Gala Pride And Diversity Center, Jonathan A. Mintz, Manuel Gonzalez

Construction Management

This paper presents the planning, design, and construction of an accessible concrete walkway completed for the GALA Pride and Diversity Center in San Luis Obispo, California. The project addressed an accessibility gap between the center's front entrance and rear parking lot through a combination of site preparation, concrete work, retaining wall construction, and supporting improvements. Construction was managed around the active events schedule while staying within the constraints of a nonprofit budget. Challenges encountered during the project included scope changes, material selection decisions, and client coordination. The completed walkway provides a safe and stable path for all visitors and directly …

Characterization Of The Thermally Driven Red Hue Effect In Coated And Uncoated Concrete Systems: Implications For Post-Fire Assessment In Wildland Urban Interface Communities, Juan C. Palominos Jr

Master's Theses

The increasing frequency and intensity of Wildland-Urban Interface (WUI) wildfires, such as the destructive 2025 Pacific Palisades Fire that destroyed over 6,000 structures, have underscored the urgent need for rapid post-fire safety assessment methodologies. This study sought to quantitatively characterize the Thermally Driven Red Hue Effect (TRHE), a unique, irreversible color shift observed in architectural coatings and concrete substrates, to determine its reliability as a permanent visual record of thermal exposure. Concrete substrates were formulated with three distinct coarse aggregates: gold granite (14.7% Fe), red cinder (22.4% Fe), and green rock (33.6% Fe) and coated with a 20 PVC waterborne …

Sorption And Thermal Conductivity Of Concrete Containing Aggregates Of E-Waste, Rakesh Kumar Saini, Praveen Kumar

Journal of Sustainable Construction Materials and Technologies

In many parts of the world, substantial energy is used to maintain comfortable temperatures in inner parts of the buildings for living and working. Construction materials with low thermal conductivity, if used in the exterior walls and façade etc. in such structures can be useful in lowering the energy demand. On the other hand, moisture ingress through sorption is a common factor contributing in degradation of concrete structures with time. Constituents of concrete may be engineered to some extent to get both the desired attributes, lower thermal conductivity and sorption than normal concrete. The rapid increase in electronic waste, or …

Exploring The Stress-Strain Relationship Of Lightweight Concrete To Enhance The Lifecycle Performance Of Transportation Highways And Bridges, Fariborz M. Tehrani

Mineta Transportation Institute

Concrete is the primary construction material of bridges, roads, and other transportation infrastructure across the United States, but conventional normal-weight concrete (NWC) is heavy, prone to cracking, and expensive to maintain over time. This study examines the mechanical properties, durability, and lifecycle performance of lightweight aggregate concrete (LWC) and internally cured concrete (ICC) as alternatives in transportation infrastructure applications. Through laboratory testing, computer modeling, and lifecycle analysis, the research evaluates how these materials perform in terms of strength, flexibility, durability, cost, and environmental impact. The results show that LWC and ICC can meet required strength levels while being lighter and …

Sustainability In Concrete: Decision-Makers, Dismissal Points, And A Framework For Implementation, Max Dennison

Construction Management

Concrete is essential to modern infrastructure, but is also one of the largest sources of embodied carbon, with cement production alone responsible for a significant share of global CO₂ emissions. Although low-carbon and otherwise “sustainable” concrete technologies are growing, their use in everyday projects remains limited. This research investigates why sustainable concrete options are most often dismissed during the project lifecycle, who drives these decisions, and what conditions are needed to enable broader adoption. Using a combination of literature review and semi-structured interviews with professionals in contracting, life-cycle assessment, sustainability consulting, and materials production, the study maps decision points from …

Feasibility Of Using Recycled Waste Plastic In Concrete Pavements In Nebraska, Amasi Hajahja, Jamilla Teixeira, George Morcous

Nebraska Department of Transportation: Research Reports

Waste plastic (WP) is a growing environmental concern due to its non-biodegradable nature, large-scale production, and harmful impact on natural resources. With nearly 75% of WP in the U.S. ending up in landfills, effective recycling strategies are urgently needed. In parallel, the limited availability of natural aggregates highlights the need for alternative materials in concrete construction. This study investigates the feasibility of using recycled waste plastic (RWP) in concrete mixtures, both as aggregates and fibers for rigid pavement applications in Nebraska. Concrete mixtures were prepared by partially replacing natural fine aggregates with recycled plastic aggregates (RPA) at replacement levels of …

Evaluating The Impact Of Aggregate Size And Reinforcement On Alkali-Silica Reaction In Concrete Through Nondestructive Testing Techniques, Li Ai, David Bianco, Vafa Soltangharaei, Rafal Anay, Mahmoud Bayat, Paul Ziehl

Civil Engineering Faculty Publications

This research investigates different nondestructive evaluation (NDE) methods to assess concrete under alkali-silica reaction (ASR) development. Four methods including acoustic emission (AE), ultrasonic pulse velocity (UPV), crack width measurement, and strain measurement were applied to reactive and control specimens under accelerated ASR conditioning. The innovation lies in using NDE methods to monitor concrete with varying aggregate sizes, quantifying method sensitivity through measured indices, and highlighting the effectiveness of each method to capture ASR development. The results indicate that the unconfined reactive fine-aggregate sample exhibited isotropic expansion, while coarse-aggregate specimens showed around 50 % greater longitudinal expansion and AE cumulative signal …

Utah’S Waste Glass Makes Concrete Stronger And Improves Durability, Rosemary Yahne

Research on Capitol Hill

Utah landfills receive thousands of tons of waste glass annually while our concrete industry relies on cement, one of the world's largest sources of CO₂ emissions.

We discovered that finely ground recycled glass can replace up to 30% of cement in concrete and improve performance.

This research tests whether Utah's waste-recycled glass can create stronger, more durable concrete for our roads, bridges, and buildings.

Towards Decarbonizing Concrete Industry In Egypt: Material Alternatives, And Economic Viability, Reem Gamal

Theses and Dissertations

The construction industry remains one of the largest contributors to global greenhouse gas emissions, with cement and steel production accounting for approximately 15% of total emissions. As global infrastructure demands continue to rise, there is an increasing need for practical tools that support low-carbon construction practices in line with international climate commitments. This research presents the development and testing of a mathematical, adaptable decision support system designed to assess both the environmental and financial impacts of material selection in concrete production. Focusing on life cycle stages A1 to A3, raw material extraction, transportation, and manufacturing, the decision support system enables …

Innovative Smart Sensing System For Accurate Monitoring Of Uhpc Setting Time, Ted Atera, Khalilullah Taj, Masoud Pasbani, Yen-Fang Su

Distinguished Undergraduate Researcher Program

Ultra-High-Performance Concrete (UHPC) is an advanced concrete material known for its strength and durability. Its superior mechanical properties make it an ideal material for demanding structural applications such as bridges. Accurate setting time measurements are crucial in helping to optimise the performance of UHPC. All conventional methods and standards for measuring the setting time of concrete rely on using expensive specialised equipment, such as the Vicat apparatus, which assesses penetration depth or resistance. However, these methods may not be well-suited for UHPC due to its rapid surface drying while the interior remains fresh. This prevents free needle penetration and leads …

Durability Of Basalt Fiber-Reinforced Polymer Bars In Moist Concrete Under Sustained Load, Osama Ahmed

Thesis/ Dissertation Defenses

This thesis is concerned with the long-term durability of basalt fiber-reinforced polymer (BFRP) bars embedded in moist concrete. The study focuses on the combined effects of exposure duration, elevated temperature, and sustained tensile stress, which together influence the mechanical and chemical stability of BFRP reinforcement in aggressive environments. The main objective is to evaluate the degradation mechanisms of BFRP bars subjected to coupled hygrothermal and mechanical conditions and to develop a predictive durability model capable of estimating service life under realistic climate scenarios. Concrete-encased BFRP bars were conditioned at three temperatures (20, 40, and 60°C), three durations (3, 6, and …

Effect Of Granite Machine-Made Sand Properties On Concrete Performance, Wang Jiliang, Wei Xinyuan, Yu Bo

Journal of China & Foreign Highway

As an important stone resource in China,granite is widely used in the preparation of machine-made sand and other building materials due to its stable physical properties and favorable mechanical performance.In order to promote the better application of granite in machine-made sand for cement concrete,this paper analyzed the mineral composition,particle grading,and mica content of granite machine-made sand.It systematically summarized the influence of these characteristics on the mechanical properties,durability,and volumetric stability of concrete.The results show that the concrete performance declines with increasing mica and stone powder content in granite machine-made sand.Properly limiting their content can improve the mechanical properties and durability of …

A Review On The Use Of Salt And Sugar As Natural Admixtures In Concrete, Noura A. Yassine, Lelian W. Elkhatib, Adel Elkordi, Mohammed Sonebi, Jamal Khatib

BAU Journal - Science and Technology

Due to the large increase in construction nowadays, the focus on the reduction of waste in the environment and saving cost becomes crucial. This issue, if solved, will conserve natural materials and make an eco-friendly environment. According to this, the use of natural materials, specifically in concrete/mortar, will shape a green and sustainable environment. One of the most used materials in construction is concrete where some additives like accelerators and retarders are added in order to enhance and modify some properties of concrete. These additives are beneficial and important to be used specifically in case of different weather conditions. Weather …

Optimizing The Use Of Sustainable Additives In Subgrade Soil Stabilization, Orchi Mallick

Student Theses and Dissertations

Subgrade soil critically impacts pavement lifespan, where poor conditions lead to premature failure. This study evaluates soil stabilization of AASTHO classified, A-4 and A-6 soil, using sustainable additives: Rice Husk Ash (RHA), Reclaimed Fly Ash (RFA), and a traditional stabilizer Hydrated Lime (HL). Laboratory tests (Atterberg Limits, Modified Proctor, California Bearing Ratio (CBR), and Free Swell) were conducted on untreated and treated soils with RHA (3%, 6%, and 9% by weight), HL (1%, 3%, and 5% by weight), RFA (4%, 6%, and 8% by weight), and combinations of HL + RHA. Results showed all stabilizers improved strength and reduced swell. …

Concrete Patio Demolition And Construction, Tyler Nielsen

Construction Management

A 6.25 cubic yard unreinforced concrete patio was constructed for the non-profit organization. This project included three phases: concrete slab demolition, grading and formwork, and concrete pouring. Each phase was estimated and then received owner approval prior to execution. The demolition phase involved obtaining city permits for a roll-off container for debris removal. This phase also included two days of work with over 10 demolition crew members, who were given the required training and equipment to ensure safety and productivity. The following weeks included grading and setting up formwork. Once the grade was complete, the formwork was laid out and …

Son Care Foundation – Pergola Structure Construction, Jackson Landless

Construction Management

This paper covers the construction process of a pergola structure for the Son Care Foundation in San Luis Obispo, California. The project’s goal in this study is to create a welcoming outdoor space for clients their dogs. Excavating four footings, fabricating custom rebar cages, and pouring concrete using fast-setting mix were all part of the construction efforts. Framing the structure required precise calculations to accommodate for the slope and corner braces. The matching white paint and corrugated PVC roof further achieved the desired aesthetic the client requested. Trial and error, practical experience, and cooperation with local material suppliers and maintenance …

Optimizing Concrete Strength: How Nanomaterials And Ai Redefine Mix Design, Dan Huang, Guangshuai Han, Ziyang Tang

Physics and Engineering Science

Nanomaterials and supplementary cementitious materials (SCMs) are typically used together in efforts to enhance the performance of concrete and mitigate the environmental impact of concrete construction. However, the complex interactions between nanomaterials, SCMs, and cement make concrete mix design a challenging, iterative, and labor-intensive process, often relying on trial-and-error experimentation. Machine learning (ML) offers an opportunity to better understand the influence of input parameters and to accelerate the optimization of mix designs through data-driven insights. This study proposes an open-source and easy-to-access framework, Canopy, to support the concrete research community in optimizing mix design. Using a dataset collected from the …

Evaluation Of Novel Jointless Engineered Cementitious Composite Ultrathin Whitetopping (Ecc-Utw) Overlay, Hassan Noorvand, Marwa Hassan, Tyson Rupnow, Ricardo Hungria

Publications

The present work corresponds to the development and the application of a cost-effective Engineered Cementitious Composites (ECC) mix design with the name M3-1.5%. Once the material was developed it was applied in the construction of a novel engineered cementitious composites ultrathin whitetopping (ECC-UTW) overlay. The overlay was constructed in May 2019 at the Pavement Research Facility (PRF) in Port Allen, Louisiana. The project was built on top of a distressed asphalt pavement corresponding to a previous project. During the construction, samples were gathered and subjected to testing after 28 days through means of compressive, uniaxial tension and flexural strength tests. …

Development Of Low-Carbon Cementitious Composites With Volcanic Ash And Calcium Carbide Residue Using Carbonation Curing, Jad Samir Bawab

Thesis/ Dissertation Defenses

The production and use of cement and concrete is a major contributor to numerous environmental problems, primarily centered around high carbon emissions, extensive resource depletion, and vast waste generation. This thesis aims to develop and characterize low-carbon concrete by using volcanic ash (VA) and calcium carbide residue (CCR) as partial cement substitutes while exposing the cementitious composite to accelerated carbonation curing. The study is a multi-level assessment of the incorporated materials and curing method divided into four phases. The first stage studied and optimized the CCR content and carbonation curing parameters of carbonation-cured concrete. It was revealed that using 5% …

Use Of Wastewater Grit And Milorganite Chaff In Concrete, Carter Deinhammer

Master's Theses (2009 -)

Wastewater grit is a major byproduct from preliminary municipal wastewater treatment. Chaff is a collection of dried biosolids generated as a waste product from Milorganite® fertilizer production. Because landfilling is a costly and unsustainable method, the development of technologies for diverting grit from landfills to a useful product by tapping grit’s inherent values (e.g., sand and gravel) are of great interest. Chaff, consisting of fibers, provides a potential source for bolstering concrete tensile strength through internal means. This research has proposed a concept of grit and chaff additive-based concrete, an expansion of the grit-assisted patch material developed (GAP) in previous …

Molecular Scale Investigations Of Interactions Between Pfas And Concrete, Eric E. Keeler

Theses and Dissertations

Per- and polyfluoroalkyl substances (PFAS), widely referred to as “forever chemicals,” exhibit high environmental persistence and potential health risks due to their robust carbon-fluorine bonds. These substances are prevalent in aqueous film-forming foams (AFFF), used in industrial and military applications, and are known to contaminate environmental surfaces, including concrete. This study aims to characterize the molecular-level interaction energies of six PFAS species—PFOA, PFOS, PFHxS, PFHxA, 6:2 FTS, and PFBS—with calcium silicate, a key component of concrete, using density functional theory (DFT) calculations. Change in Gibbs free energy (ΔG) was determined for each of the interactions, revealing negative ΔG values for …

A Durability Evaluation Of Class B Concrete Bridge Substructures Under West Virginia Freeze–Thaw Conditions, Nathaniel Wayne Dunbar

Graduate Theses, Dissertations, and Problem Reports (ETD)

This study evaluates whether the West Virginia Division of Highways (WVDOH) Class B concrete specification for bridge substructures remains adequate under modern durability and design-life expectations. The current specification, which permits a minimum compressive strength of 3,000 psi, reflects practices established when shorter service lives were generally assumed. Modern AASHTO LRFD provisions are based on a 75-year design life, raising concern that this lower-strength concrete may not provide sufficient durability under West Virginia’s climatic conditions.

To address this issue, bridge inspection data, regional climate mapping, and durability modeling were used to assess the condition and performance of concrete substructures across …

Durability Of Basalt Fiber-Reinforced Polymer Bars In Moist Geopolymer Concrete, Mouaz Chkhachirou

Thesis/ Dissertation Defenses

The rapid growth of infrastructure projects in the Gulf region has significantly increased the demand for construction in the urban coastal areas of the Arabian Gulf. This harsh coastal environment accelerates the corrosion of steel reinforcement in structural concrete, which leads to severe safety hazards as well as considerable financial losses. The utilization of non-corrodible materials as reinforcement bars in concrete structures would extend their service life and reduce the operation and maintenance expenditure. Basalt fiber-reinforced polymer (BFRP) bars have great potential to replace traditional steel reinforcement and eliminate corrosion-related problems. At the same time, the construction industry is responsible …

Controlling Expansion Behavior Through Curing And Mix Design For An Expansive, Rapid-Setting Bcsa Cement, Amanda Parolini Dutra

Graduate Theses and Dissertations

Cracking in concrete has been a concern for engineers because it reduces its durability and strength. Some of this cracking behavior is due to shrinkage, which occurs when the water in the concrete evaporates and causes a reduction in volume. Expansive cements were invented to counteract this shrinkage behavior. This research studies a new formulation of a standalone, fast-setting, fast-strength gain expansive BCSA cement. Since it is a new cement, a limited amount of literature is available about mixture design, strength properties, and how to obtain the desired level of expansion. This study then aims to fill some of these …

Paste Properties, Hardened Concrete Properties, And Mix Design Process For Magnesium Phosphate Cement, Rilye Dillard

Graduate Theses and Dissertations

Magnesium phosphate cement (MPC) is a rapid-setting alternative cement typically used as a quick repair material. MPC has gained popularity in recent years due to its ability to reduce CO2 emissions, its strong chemical resistance, and potential use in large scale applications. There is currently limited research on the properties of MPC when varying the proportions of its ingredients. Several hardened concrete properties were analyzed on concrete mixtures made with MPC. A mix design process for MPC concrete is proposed based on testing of 300 MPC paste mixtures and 115 MPC concrete mixtures. A standardized mix design process is imperative …

An Investigation Into The Effect Of Performance Engineered Mixture (Pem) Design On The Workability And Strength Of Concrete Pavement Mixtures, Alexander Cook

Graduate Theses and Dissertations

The Arkansas Department of Transportation (ARDOT) currently requires a minimum cement content of 564 pounds of cement per cubic yard of concrete. This minimum cement requirement can be reduced through the utilization of optimized gradation of aggregates within concrete mixtures as well as the addition of supplementary cementitious materials (SCMs) such as fly ash. The study presented in this paper aims to demonstrate how the use of the Tarantula Curve can be used to design concrete mixtures with reduced cement contents while maintaining sufficient workability for concrete mixtures to be used for slipform paving. Fresh workability was measured using the …

Caed Shop Entrance Wall Redesign, Theodore Haoran Khuong, Joelle Schalesky, Ellen Elizabeth Untalan, Katherine Evalyn Timbes

Construction Management

This paper details the preconstruction process involving the replacement and redesign of the north wall at the CAED Support Shop at Cal Poly, San Luis Obispo. Accomplished by an interdisciplinary team of Architectural Engineering and Construction Management students, this project explores the requirements and procedures of generating a project proposal to submit to Cal Poly Facilities Management. The project, initiated in the fall of 2024, aimed to redesign the wall aligned with the adjacent Engineering West building and replace it with a CMU low lift grouted wall. The CAED Support Shop is offered as a resource to all CAED students …