Petroleum Engineering Commons^™

Gas Composition Analysis Using Limited Production Data Eagle Ford Case Study, Ryckur K. Shuttler

Honors Capstones

No abstract provided.

The Biological Impact Of Concurrent Exposure To Metallic Nanoparticles And A Static Magnetic Field, Kristen K. Comfort, Elizabeth I. Maurer, Saber M. Hussain

Chemical and Materials Engineering Faculty Publications

The rapid advancement of technology has led to an exponential increase of both nanomaterial and magnetic field utilization in applications spanning a variety of sectors. While extensive work has focused on the impact of these two variables on biological systems independently, the existence of any synergistic effects following concurrent exposure has yet to be investigated. This study sought to ascertain the induced alterations to the stress and proliferation responses of the human adult low calcium, high temperature keratinocyte (HaCaT) cell line by the application of a static magnetic field (approximately 0.5 or 30 mT) in conjunction with either gold or …

Effects Of Enhanced Oil Recovery On Production Engineers, Elm Coulee Field, Bakken Reservoir, Richland County, Montana, Burt J. Todd, Ph.D., John Evans, Leo Heath, David Reichhardt

Petroleum Engineering

This presentation describes research at Montana Tech to improve oil recovery rates in the Elm Coulee Oil Field in the Bakken Reservoir, Richmond County, Montana. The slides display current recovery rate predictions, enhanced oil recovery methods, reservoir model building and history matching strategies. Recommended development strategies include implementing hydrocarbon gas injection operations to improve current oil recovery rates by more than 75%. The impact of increased production on Production Engineers is also described. The Principal Investigators include John Evans, Leo Heath, David Reichhardt and Burt Todd in the Petroleum Engineering Department.

Slab Flattening Trigger For Isotopic Disturbance And Magmatic Flareup In The Southernmost Sierra Nevada Batholith, California, Alan D. Chapman, Jason B. Saleeby, John Eiler

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The San Emigdio Schist of Southern California permits examination of partial melting and devolatilization processes along a Late Cretaceous shallow subduction zone. Detrital and recrystallized zircon of the structurally highest portions of the schist bracket the depositional age to between ca. 102 and 98 Ma. Zircon oxygen isotope data from both lower-plate schist and upper-plate assemblages of the Sierra Nevada batholith (SNB) reveal a δ18O shift of ̃1.5% between igneous (̃5.5%) and recrystallized (̃7%) domains. These results, taken with previous zircon and whole-rock δ18O measurements, provide evidence for devolatilization and/or partial melting of the schist and fluid ascent through overlying …

Decoupling The Stationary Navier-Stokes-Darcy System With The Beavers-Joseph-Saffman Interface Condition, Yong Cao, Yuchuan Chu, Xiaoming He, Mingzhen Wei

Mathematics and Statistics Faculty Research & Creative Works

This paper proposes a domain decomposition method for the coupled stationary Navier-Stokes and Darcy equations with the Beavers-Joseph-Saffman interface condition in order to improve the efficiency of the finite element method. The physical interface conditions are directly utilized to construct the boundary conditions on the interface and then decouple the Navier-Stokes and Darcy equations. Newton iteration will be used to deal with the nonlinear systems. Numerical results are presented to illustrate the features of the proposed method.

Enzymatic Production Of Biodiesel From Fats Extracted From Lamb Meat Using Supercritical Co2, Hanifa Easa Taher

Theses

Due to the reduction in fossil fuel reserves and associated environmental impacts from using petroleum fuels, biodiesel has been presented as a feasible alternative because it is sustainable and environmentally friendly. In this study, it is proposed to investigate the feasibility of enzymatic production of biodiesel from waste animal fats using supercritical fluid technology for the extraction and reaction. The operating conditions that resulted in the optimum extraction and biodiesel production yield were identified. To the best of my knowledge of the investigators, the waste animal fat extracted by supercritical CO₂ (SC-CO₂) for the production of biodiesel …

A Framework For Oil Price Benchmark Determination: Lessons For Nigeria, Taiwo H. Sanni, Bassey D. Akpan

Bullion

The main thrust of this paper is to draw lessons of experience from other selected oil producing countries. the outcome of the study is expected to help in strengthening Nigeria's oil price framework in line with international best practice. Section 2 dwells on the theoretical and literature review on oil based fiscal rule, while section 3 presents the framework for oil price benchmark determination and section 4 examines those factors capable of stimulating determination of oil price benchmark, lastly section 5 discusses some lessons of experience from Nigeria and then the conclusion.

Fuel Subsidy And Other Unproductive Public Expenditures Removal: A Pragmatic Approach To Restructure And Transform The Nigerian Economy, Lawrence O. Akinboyo

Bullion

While the short term measures to reduce recurrent expenditure are necessary conditions for fiscal sustainability, the long term imperative is to increase revenue. Thus, efforts should be made by the fiscal authorities in Nigeria to pursue the policy of balancing of expenditure with revenue improvements. The issues of the underperformance of the capital budget should be reversed before savings from cuts in recurrent expenditure can be diverted to the financing of capital expenditure. From the analysis, we say that removal of fuel subsidy would no doubt have some social and economic hardship on the people in the short run, However, …

Comparison Of Square Root Of Time Approach And Statistical Approach To Minimize Subjectivity In The Determination Of Minimum In-Situ Stress, Soumitra Bhaskar Nande

Masters Theses

"A formation's minimum in-situ stress is an important parameter to determine for hydraulic fracturing. While minimum in-situ stress, and its orientation, can be measured from triaxial tests on core, it is more common to measure it as closure stress, by performing pressure testing of wells in the field. Closure stress is considered equal to, or a good approximation of the minimum in-situ stress for most cases. The analytical methods applied to such pressure testing include the square root of time plot, G function plot and the G-dP/dG plot. These plots require the engineer to fit tangent lines to the data, …

Development Of A Framework For Scaling Surfactant Enhanced Co₂ Flooding From Laboratory Scale To Field Implementation, Gbolahan I. Afonja

LSU Doctoral Dissertations

The efficiency of the use of CO2 as a displacement fluid in oil recovery is hampered by the existence of an unfavorable mobility ratio that is caused by the large difference in viscosity between the injected fluid (CO2) and the reservoir fluids. This viscosity contrast results in early CO2 breakthrough, viscous fingering, gas channeling, and consequently, the inability of CO2 to effectively contact much of the reservoir and the oil it contains. Improvement of sweep efficiency and mobility control in CO2 injection require solutions to these problems. The use of surfactants and other chemical means for mobility control has been …

A Feasibility Study Of Multi-Functional Wells For Water Coning Control And Disposal, Lu Jin

LSU Doctoral Dissertations

Although water coning is well understood, it is difficult to control in field operations resulting in low recovery and large volumes of waste produced water. A solution - proposed here - is a multi-functional well with the in-situ bottom water drainage and injection installations - Downhole Water Loop (DWL). Theoretically, DWL greatly improves well performance (for example, a two-fold increase of DWL well’s water drainage rate would increase the critical (water-free) oil rate by 80%). However, DWL has practical limitations that must be quantified for actual well design. The objective of this work is to: (1) find maximum water drainage …

Multi-Scale Modeling Of Inertial Flows Through Propped Fractures, Ali Takbiri Borujeni

LSU Doctoral Dissertations

Non-Darcy flows are expected to be ubiquitous in near wellbore regions, completions, and in hydraulic fractures of high productivity gas wells. Further, the prevailing dynamic effective stress in the near wellbore region is expected to be an influencing factor for the completion conductivity and non-Darcy flow behavior in it. In other words, the properties (fracture permeability and β-factor) can vary with the time and location in the reservoir (especially in regions close to the wellbore). Using constant values based on empirical correlations for reservoirs/completions properties can lead to erroneous cumulative productivity predictions. With the recent advances in the imaging technology, …

Tannic Acid Coated Gold Nanorods Demonstrate A Distinctive Form Of Endosomal Uptake And Unique Distribution Within Cells, Emily A. Untener, Kristen K. Comfort, Elizabeth I. Maurer, Christin M. Grabinski, Donald A. Comfort, Saber M. Hussain

Chemical and Materials Engineering Faculty Publications

One of the primary challenges associated with nanoparticle-dependent biological applications is that endosomal entrapment in a physiological environment severely limits the desired targeting and functionality of the nanoconstructs. This study sought to overcome that challenge through a systematic approach of gold nanorod (GNR) functionalization: evaluating the influence of both aspect ratio and surface chemistry on targeted cellular internalization rates and preservation of particle integrity. Owing to their unique spectral properties and enhanced surface area, GNRs possess great potential for the advancement of nanobased delivery and imaging applications. However, their ability for efficient intracellular delivery while maintaining their specific physiochemical parameters …

Gas And Water Flow Through Nanoscale Porous Media, Songyuan Liu

Masters Theses

"This work provides a lab experiment to describe the fluid diffusion in nanoscale porous media. By using ideal ceramic membranes which have uniform pore size in nanoscale and homogeneous pore distribution instead of shale or tight sandstone which have various pore sizes and complicated pore distribution and structure, a better understanding of fluid flow through nanoscale porous media could be gained.

Core flooding test were conducted by injecting nitrogen and water separately to describe gas and liquid flow in nanoscale porous media. With all the other factors known or controlled, pressure and flow rate were measured to calculate permeability. By …

Comparison Of Class Ii Injection Well Area Of Review Requirements With Area Of Evaluation For Hydraulically Fractured Wells, Yashesh Jitendra Panchal

Masters Theses

"Since 2010 the US Environmental Protection Agency (EPA) has been proposing plans to study, and has now initiated research regarding the potential impact of hydraulic fracturing processes on drinking water sources. Their work refers to an 'Area of Evaluation' around a hydraulically fractured well, inferring that the wells immediately around hydraulic fractured wells should be studied, to evaluate the conditions of these wells and their potential to contaminate overlying USDWs. Class II injection wells must have a minimum 1/4 mile radius area of review to determine the condition of wells surrounding the proposed injection well. All wells within this AOR …

Tensile Failure During Structural Development Of Single-Layer Buckle Folds, Xiaolong Liu

Masters Theses

"Folds and fold trains of sedimentary strata are among the most common structural traps systems for hydrocarbon reservoirs. The existence of tensile fractures associated to buckle folding is associated to the distribution of extensional strain in the outer arc of the fold hinges. This study investigates the conditions under which tensile stresses develop due to buckling in a realistic in situ stress scenario. By applying a 2D finite element modeling approach, the influence of realistic mechanical stratigraphy (including strain rate, overburden depth, competence contrasts, viscosity, and permeability) on the development of single-layer buckle folds with Newtonian viscous rheology is studied. …

Computational Fluid Dynamics Flow Comparison Between Openhole Sleeve And Plug-And-Perf Completion In A Hydraulic Fractured Horizontal Well, Viriyah Theppornprapakorn

Masters Theses

"Multi-stage hydraulic fracture completions in horizontal wells have facilitated economic development of natural gas from unconventional and tight gas reservoirs.Industry has relied on two horizontal multi-stage completion technologies: cemented and perforated liner or Plug-and-perf method and Openhole Sleeve Multi-stage method. Each method has its own advantages and disadvantages. However, one of the most important questions is which method yields better gas production? Computation fluid dynamics (CFD) is a powerful tool for solving complex fluid flow problems. In well completion design, CFD plays a significant role aiding the completion engineers on making decision on well completion methods. In this study, a …

Analytical Modeling And Diagnosis Of Penetration Rate Performance Of Pdc Bits, Reza Rahmani

LSU Doctoral Dissertations

The high cost of drilling deep (15000+ ft) wells, due to slow rate of penetration (ROP) at depth, has severely limited the utilization and economic significance of deep hydrocarbon resources. The overall objective of this study was to obtain a better understanding of the major cause(s) of slow ROP in deep drilling. An analysis of field data demonstrated the impact of the problem and identified shale and limestone as the primary lithologies where slow ROP occurs at depth. Previous researchers have concluded that interactions between rock, drilling fluid, cuttings, and the bit control ROP. More specifically, several researchers have concluded …

Emergence Of Delamination Fractures Around Casing And Its Stability, Wei Wang

LSU Doctoral Dissertations

The cement sheath failures and nearby wellbore failures may lead to upward flow of drilling fluid or formation fluid, which may have significantly adverse consequences like loss of reserve and environmental hazards. In order to maintain wellbore integrity in the long term, it is expedient to examine the causes of failures around the wellbore and propose suitable numerical models to predict annulus cracks around the casing. The complex failure behavior of cement/rock interfaces observed in the laboratory experiments does not look like the behavior of linear or simple nonlinear mechanical interfaces. Cohesive zone method (CZM) with BK-form bilinear traction separation …

A Large Scale Network Model To Obtain Interwell Formation Characteristics, Seyedmohammadamin Gherabati

LSU Doctoral Dissertations

Limited data availability and poor data quality make it difficult to characterize many reservoirs. For reservoirs that have undergone waterflooding, production and injection data are a reliable source of information from which injector-to-producer connections can be inferred. In this research, we use well locations, injection and production rate data and well fractional flow values to develop a reservoir-scale network model. A Voronoi mesh divides the reservoir into a number of node volumes each of which contains a well. Bonds connect each of the nodes with conductance values that must be inferred from the rate data. An inverse problem is formulated …

Experimental And Modeling Study Of Foam Flow In Pipes With Two Foam-Flow Regimes, Ali Reza Edrisi

LSU Doctoral Dissertations

The use of foams can be found abundantly in many applications in a wide range of industries, including oil and gas industry. Although understanding foam flow behavior is crucial for the optimization of such applications, the complex flow behavior of foams has been a major challenge. Recent experimental studies with surfactant foams presented a new way to characterize foam flow characteristics by using two flow regimes: the low-quality regime showing either plug-flow or segregated-flow pattern, and the high-quality regime showing slug-flow pattern. This study consists of three main components: (1) experimental investigation of foam rheology in pipes; (2) building up …

Preparation Of Cobalt/Nickel Molybdenum Sulfide Catalysts Supported By Aqueous Media Soluble Multi-Wall Carbon Nanotubes., Hassan Ahmad Bleibel

Open Access Theses & Dissertations

Multi-walled carbon nanotubes (MWCNTs) have been subjected to chemical treatment in order to introduce hydrophilic functional groups on their surfaces. These covalently bonded groups did enhance the solubility of MWCNTs in aqueous media as expected. Functionalized MWCNTs were characterized using FTIR, Raman spectroscopy, TGA, X-ray diffraction, dispersion test and TEM. Then, functionalized MWCNTs were incorporated in the hydrothermal synthesis method of transition metal sulfide catalysts (CoMo, NiMo, and Ethylenediamine-CoMo Sulfides). Catalysts were characterized using X-ray diffraction, TEM, SEM, N2 Gas adsorption-desorption, elemental analysis, and Hydrodesulfurization (HDS) reaction of dibenzothiophene (DBT). The objective was to study the functionalized MWCNTs' effect; being …

Aggregation Of Uncontrolled Fluids During Catastrophic System Failures In Offshore Environments, James Thomas Stiernberg

LSU Master's Theses

Safety culture relating to offshore operations has shifted since the Deepwater Horizon blowout and resulting oil spill. This incident has prompted the research of high volume spills during all stages of hydrocarbon exploration and production. This study particularly covers the interactions of wells and offshore networks as they pertain to situations where a release of reservoir fluids to the environment is occurring. Primary concerns of this investigation are stream confluences, leak modeling, and fluid behavior; the first two will be handled with various numerical software packages (OLGA®, CFD, and nodal analyses) while the later will require more rigorous treatment and …

Dynamic Modeling Of Channel Formation During Fluid Injection Into Unconsolidated Sands, Sayamik Ameen

LSU Master's Theses

Water injection is widely used for sweeping hydrocarbons in waterflooding operations, and also for maintaining reservoir pressure or disposing waste water. Injection at a high rate is required to maintain the economy of waterflooding projects; however, loss of injectivity is a quite common problem in unconsolidated sand formations like deep water Gulf of Mexico. Well intervention operations, hurricanes, and other issues require frequent shut-downs during the life of offshore wells; in order to minimize deteriorating effect of these shutdowns on wellbore injectivity more accurate modeling of the injection process is needed. Injection of water into a saturated, granular, porous medium …

Discrete Phase Simulations Of Drilled Cuttings Transport Process In Highly Deviated Wells, Doguhan Yilmaz

LSU Master's Theses

Transporting drilled cuttings from the bottomhole to the surface becomes more difficult and problematic in highly deviated wells than in vertical wells. Cuttings tend to settle down on the low side of the annulus typically in the form of a bed which can cause further problems. The height of this bed depends on many parameters such as annular domain geometry, drilling fluid density and rheology, annular flow rate, drill pipe rotation speed, cuttings size, shape, and their density. Prediction of the stationary cuttings bed height with respect to these aforementioned parameters is thus necessary to optimize the range of the …

The Diagnosis Of Well Control Complications During Managed Pressure Drilling, Brian Piccolo

LSU Master's Theses

The constant bottom-hole pressure method of managed pressure drilling is generally expected to reduce well control risks and apply well understood concepts when a kick is taken. Nevertheless, complications, such as operator error, leaks, plugging, equipment failures, and exceeding kick tolerance, can occur during kick circulation. By not properly interpreting the symptoms of a complication, a driller risks the consequences of additional influx, lost circulation or the simultaneous occurrence of both. To address the challenge of diagnosing complications, the implied pit gain (IPG) method is being evaluated as an enhancement to established industry practices. Traditional diagnostic methods attempt to match …

Thermal, Compositional, And Salinity Effects On Wettability And Oil Recovery In A Dolomite Reservoir, Azadeh Kafili Kasmaei

LSU Master's Theses

Low salinity and composition effects in improving oil recovery in sandstone reservoirs are known. However, these effects have not been thoroughly studied for the carbonate reservoirs. Because of the lack of the clay minerals in the carbonate rocks, the mechanisms for the improved oil recovery with low salinity, brine composition, and temperature may not be the same as those for sandstones. This experimental study attempts to investigate the effects of low salinity, brine composition, and temperature on wettability and oil recovery in a dolomite reservoir. Also, it is attempted to confirm that wettability alteration is the main mechanism for improvement …

Establishing Well Operability Limits For Frac Pack Sandface Well Completions Using A Screen Erosion Model And Well Completion Score Card, Rickey Hendrix

Doctoral Dissertations

"Completion quality has a direct impact upon the maximum production rate at which a frac pack well should be operated. Best practices for frac pack well completions ensure the highest possible quality for the well completion. A novel frac pack well completion score card was developed based on best practices for frac pack well completions identified through consultation with industry experts. The score card systematically combines and assesses completions data readily available standard completion reports. The outcome of the score card process is a numerical completion quality rating, which combines all well design and frac pack operations information.

The completion …

Coupled Geomechanical Reservoir Simulation, Amin Amirlatifi

Doctoral Dissertations

"Founded by Department Of Energy, the Plains CO₂ Reduction (PCOR) Partnership is investigating the Williston Basin as a candidate for sequestering CO₂ emissions from power plants. The State of Missouri, a member of PCOR, lies at the outermost point on the proposed transportation route and consequently faces the highest CO₂ compression and transportation costs. In order to minimize the cost of CO₂ sequestration, it is desirable to find a storage site within the state. The Lamotte sandstone is identified as a suitable sequestration aquifer formation in Missouri with acceptable permeability, porosity, extension, rock strength and water salinity. Using the finite …

Minimizing Formation Damage For Preformed Particle Gels Treatment In Mature Reservoirs, Mahmoud Omran Elsharafi

Doctoral Dissertations

"This research studied the effect of preformed particle gels (PPGs) on unswept, low-permeable zones/areas. The objective was to find methods that minimized the damage caused by PPGs on unswept, low-permeable zones/areas, thus improving PPG treatment efficiency. These results can help to identify of the best PPG types, particle sizes, and brine concentrations for specific reservoirs and treatments. This study used sandstone core samples with various degrees of permeability. Two types of particle gels, a strong Daqing gel (DQ) and a weak Liquiblock™ 40k gel (40K), were used, each with a different strength.

This research included two stages. Firstly, both a …