Catalysis and Reaction Engineering Commons^™

Preparation And Characterization Of Reactive Composites Combining Boron With Mixed Oxides, Purvam Mehulkumar Gandhi

Theses

Thirteen liquids have been explored as Process Control Agents (PCAs) for high-energy mechanical milling of two metal oxide powders, CuO and Bi₂O₃, with the practical purpose to reduce the sizes of powder particles and refine their crystal structure. Multiple liquid properties have been considered to analyze their effect on evolution of both particle and crystallite sizes during milling for each oxide. Experimental data were analyzed using the δ-AICc (Akaike Information criterion) correlation function applied to linear relations between liquid properties and powder characteristics. Multiple linear correlation models were ranked based on the highest log-likelihood and the …

Mixed Complex Compounds Of Palmitate, Oleate Calcium With Acetamide, Nicotinamide And Thiocarbamide, Ibadullaeva Tursunoy, Azizov Tokhir, Ibragimova Мavluda

CHEMISTRY AND CHEMICAL ENGINEERING

The purpose of the study was the synthesis and study of the structure of mixed complexes of palmitate, calcium oleate with acetamide, nicotinamide and thiocarbamide. The mixed coordination compounds of palmitate and calcium oleate were synthesized. The composition, individuality, thermal behavior, methods of coordinating the palmitate and oleate fragments, acetamide, nicotinamide and thiocarbamide molecules have been established. Comparison of the diffraction patterns of calcium palmitate and oleate, free ligand molecules and synthesized compounds showed the mismatch of the diffractograms, conseqently that the synthesized complexes have an individual crystal lattice different from the starting materials. The method of coordination of amide …

Synthesis Of Esters Of Halogenoacetic Acids, Yuldasheva Muxabbat, Turaev Sherzod

CHEMISTRY AND CHEMICAL ENGINEERING

Amidoalkylating reagents containing a phthalimide group are used in the synthesis of hard-to-reach primary amines and complex heterocyclic compounds. These types of amidoalkylating compounds are suitable reagents for nucleophilic substituted reactions in acidic media due to their resistance to acids. Result of reactions of amidoalkylating reagents-N-hydroxyethylphthalimide and N-hydroxymethylphthalimide with aliphatic carbonic acids can also produce new bactericidal and fungicidal esters. In this study, halogen acids reacted with N-hydroxymethylphthalimide monochloric acetic acid, monobromic acetic acid, monoiodic acetic acid, trifluoric acetic acid and trichloroacetic acid, as well as, N-b-hydroxyethylphthaleidyl monohydric acid. As a result of the reactions, new phthalimidomethyl and phthalimidoethyl esters …

Numerical Simulations Of Current And Temperature Distribution Of Symmetrical Double-Cathode Solid Oxide Fuel Cell Stacks Based On The Theory Of Electric-Chemical-Thermal Coupling, Cheng-Rong Yu, Jian-Guo Zhu, Cong-Ying Jiang, Yu-Chen Gu, Ye-Xin Zhou, Zhuo-Bin Li, Rong-Min Wu, Zheng Zhong, Wan-Bing Guan

Journal of Electrochemistry

Solid oxide fuel cell (SOFC) is a high-efficient clean conversion device for future energy management. Because of the low antioxidant reduction ability and complex thermal stress, the structure of traditional asymmetrical thin anode-supported planar SOFC is easily to be broken under stack operating conditions. To overcome these defects, a new complete symmetrical SOFC based on double-sided cathodes was developed. To study the influences of gas flow direction and current collection mode on the cell performance inside stack, a numerical model was established by finite element method based on the theory of electro-thermo-chemo multiphysical coupling. By applying this model, the molar …

Effect Of Reaction Conditions On Cu⁃Catalyzed Co2 Electroreduction, Chang Zhu, Wei Chen, Yan-Fang Song, Xiao Dong, Gui-Hua Li, Wei Wei, Yu-Han Sun

Journal of Electrochemistry

Electrochemical conversion of carbon dioxide (CO₂) driven by renewable electricity that can meet both carbon emission reduction and renewable energy utilization has been rapidly developed in recent years. Copper (Cu) catalyst has long been a promising candidate for CO₂ electroreduction applications because of its natural abundance and specific capability of producing a substantial amount of C2 products. However, various metallic Cu electrodes reported have been significantly influenced by the adsorption of certain cation/anion ions, resulting in wide-span catalytic activities and selectivity for various products. In addition, a recent report demonstrated that by virtue of gas-diffusion flow cell …

Core-Shell Structured Ru@Ptru Nanoflower Electrocatalysts Toward Alkaline Hydrogen Evolution Reaction, Xue-Liang Wang, Yuan-Yuan Cong, Chen-Xi Qiu, Sheng-Jie Wang, Jia-Qi Qin, Yu-Jiang Song

Journal of Electrochemistry

Water electrolysis for hydrogen production is beneficial for solving the problem of energy crisis and environmental issues. It is necessary to study highly active and cost-effective catalysts toward hydrogen evolution reaction (HER) to reduce the consumption of noble metals. Herein, we report the synthesis of core-shell structured Ru@Pt_0.24Ru nanoflowers electrocatalyst by stepwise reduction of Ru and Pt precursors in the mixture of oleylamine and benzyl alcohol at 160 ^oC. The average diameter of the resultant Ru@Pt_0.24Ru was 16.5±4.0 nm with a bulk atomic ratio between Pt and Ru of 0.24:1 and a surface ratio of …

Reduction Of Copper And Iron Oxide Mixture With Local Reducing Gases, Shokhrukh Khojiev

Acta of Turin Polytechnic University in Tashkent

The article analyzes the scientific problems of the copper industry. In particular, the main problem with the classical production of copper is the causes of large amounts of slag and the negative impact of these wastes on the environment. Accordingly, the main component that forms the slag is iron, and the higher its content in the original copper concentrate, the more slag is formed, and at the same time a large amount of copper metal is released into the waste. The departure is indicated by evidence. To prevent this problem, a technology has been proposed to reduce copper sulfide concentrates …

Understanding The Role Of Atom Trapping In The Evolution Of Hydrocarbon Transformation Catalyst Morphology, Griffin Alexander Canning

Chemistry and Chemical Biology ETDs

Converting alkanes to other, more chemically and economically valuable molecules requires catalysts that can survive elevated temperatures and highly reducing environments. These environments can cause many metal-nanoparticle based catalysts to sinter rapidly, causing a loss of activity. They must also tolerate the coke formation, as well, since coke can restrict access to active sites by gas phase molecules, thus lowering catalytic activity. While there are routes to improve both the sinter and coke resistance of catalysts, an alternative strategy is to develop a protocol for regenerating the activity of the catalyst in question when coke formation or sintering becomes problematic. …

Atom Trapping And Its Role On The Nucleation & Growth Of Platinum Nanoparticles, Deepak Kunwar

Chemistry and Chemical Biology ETDs

Diesel oxidation catalysts deactivate due to Pt sintering, a major problem in automotive industries. To make sure they operate effectively throughout the lifetime of the vehicle, automotive industries are putting an excessive amount of Pt. There is a need to develop a catalyst that serves long term performance with minimal use of Pt. Jones et al^.1 demonstrated that ceria traps Pt atoms. His work generated some logical and valid questions such as what is the mechanism for the formation of anomalously large Pt particles? What is the upper limit of Pt metal loading in the form of single atoms …

Facile Synthesis Of Nitrogen-Doped Graphene-Like Active Carbon Materials For High Performance Lithium-Sulfur Battery, Quan-Hua Meng, Wen-Wen Deng, Chang-Ming Li

Journal of Electrochemistry

Lithium-sulphur (Li-S) battery is regarded as a promising energy storage device because of its high theoretical capacity. However, the low S utilization and short cycling life limit the commercial applications. In this work, nitrogen-doped graphene-like carbon (NGC) materials were synthesized by simply pyrolyzing and carbonizing the mixture of melamine (C₃H₆N₆) and L-cysteine (C₃H₇NO₂S). The graphene-like structure in NGC effectively buffered the volume change of S during the discharge/charge process and improved the cycling stability. Meanwhile, nitrogen-containing functional groups in NGC facilitated the transportation of ions and suppressed the …

A Model For The Anodic Carbonization Of Alkaline Polymer Electrolyte Fuel Cells, Qi-Hao Li, Ying-Ming Wang, Hua-Long Ma, Li Xiao, Gong-Wei Wang, Jun-Tao Lu, Lin Zhuang

Journal of Electrochemistry

The alkaline polymer electrolyte fuel cell (APEFC) has made appreciable progress in recent years but is still suffering performance loss during discharge with air as the oxidant. Several theories have been suggested to interpret the loss. However, efforts are still needed to reach a clear quantitative understanding. Based on the major experimental findings in combination with thermodynamics and kinetics of the reactions involved in the anode, this paper presents a model featuring layered carbonization in the anode and relevant grouped equations. The simulation results generated from the latter are compared with experiments, and possible principles to suppress the performance loss …

Mucilage-Capped Silver Nanoparticles For Glucose Electrochemical Sensing And Fuel Cell Applications, Ziad Khalifa, Moustafa Zahran Dr, Magdy Zahran Prof, Magdi Abdel Azzem Prof

Chemical Engineering

A simple, cost-effective and green mucilage-capped silver nanoparticles (Mucilage-AgNPs) modified glassy carbon electrode (GC) composite was constructed for efficient and facile electrochemical oxidation of glucose for the first time. Mucilage-AgNPs were synthesized through the direct chemical reduction of Ag+ by mucilage extracted from Opuntia ficus-indica. Mucilage-AgNPs were identified and characterized using ultraviolet-visible spectroscopy, transmission electron microscopy and square wave voltammetry. Modification of the GC with AgNPs was carried out via a transfer-sticking technique with an immobilization time of 1 h. The Mucilage-AgNPs/GC composite was studied as a possible anode for glucose oxidation in a biofuel cell. The composite resulted in …

Modification Of Inuline By Iodic Acid, Rakhmanberdiyev Gappar, Ibragimova Кomila, Аxmedov Оliy

CHEMISTRY AND CHEMICAL ENGINEERING

In order to further modify inulin with drugs, the process of introducing reactive aldehyde groups into the inulin macromolecule was carried out. Aldehyde groups were introduced by oxidizing inulin with iodic acid. The process of oxidation of inulin and cellulose with iodic acid was compared. The quantities of aldehyde groups in the oxidized samples were estimated, their molecular weights were determined, IR spectra were measured, the iodine number of the inulin dialdehyde and their oxidation state were determined.

Synthesis Of 1,2,3-Triazoles Based On Propargyl Ethers Of Carbamate, Djuraev Abdukahhor, Yakubxodjaeva Malika, Ataxodjaeva Matluba, Gaibullaev Oibek

CHEMISTRY AND CHEMICAL ENGINEERING

By the interaction of propargyl esters of carbamate derivatives with phenylazide, 1,2,3- triazole derivatives were synthesized. Their anti-inflammatory activity was subsequently studied.During the study of biological activity, a relationship was established between the anti- inflammatory activity and the chemical structure in the studied series of 1,2,3-triazole derivatives.

The Research Of Conditions For The Formation Of Phenol Formaldehyde Resins Modified With Hydroxyl Containg Polyether Polyol, Magrupov Farkhad, Umarov Sherali, Tohirov Murodjon, Radjabova Zukhra

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of the study was to study the conditions of copolycondensation of phenol alcohol with hydroxyl-containing polyether polyol in the presence of maleic anhydride chain extender in order to obtain modified thermoset phenolic-formaldehyde oligomers. Investigation of the dependence of the content of free phenol, formaldehyde and methylol groups on time during the synthesis of the modified phenol-formaldehyde resin with the ratios hydroxyl-containing polyether polyol:phenol alcohol 1:60 mol/mol and 1:100 mol/mol. It was revealed that maleic anhydride, present in the reaction medium as a copolycondensation catalyst, also participates in copolycondensation reactions as a chain extender. Moreover, as the molar fraction …

Vinylation By 3,6-Dimetyloctin-4-Diol-3,6 Acetylene, Yusupova Lola, Abdukarimova Saida, Rajabov Rustambek, Khalimova Oygul

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of the research work elaboration of technology of obtaine of acetylene diols and their vinyl ethers. Reaction of formation mono di vinyl ethers as a result vinyl 3,6-dimetyloktin-4-diol-3,6 by acetylene, and also influence of solvents, the catalyst and its quantity, duration of reaction, temperatures is investigated. Are defined speed of reaction. Recommended vinyl 3,6-dimetyloktin-4-diol-3,6 acetylene in the presence of highly basic systems at atmospheric pressure.

Synthesis And Research Of New Heterometal Complexes Cо(Ii), Ni(Ii), Cu(Ii) And Mn(Ii) Based On V(V) And 5-(4-Pyridyl)-1,3,4-Oxadiazole-2(3h)-Thione Lubricants, Pirimova Mehribon, Kadirova Shakhnoza, Rakhmonоva Dilnoza, Ziyayev Abduhakim

CHEMISTRY AND CHEMICAL ENGINEERING

The oxadiazole derivatives complex compounds with metals are biologically active substances. The aim of the study was to study the interaction of the chlorides of Co (II), Ni (II), Cu (II) and Mn (II) with 5-(4-pyridyl)-1,3,4-oxadiazole-2(3H)–thione, ammonium vanadate. Competitive coordination of donor centers, electronic and geometric structures of the ligand molecule were studied on the basis of the quantum-chemical software package Gaussian09 LanL2DZ. It was shown that 5-(4-pyridyl)-1,3,4-oxadiazole-2(3H)-thione ligand is partially coordinated through a localized nitrogen or sulfur atoms at formation of the complex. А procedure was developed for the synthesis of new mixed-metal complexes. The composition and structure of …

Research Of Kinetic Characteristics Of The Process Of Decomposition Of Zinc Concentrate With Hydrochloric Acid, Rosilov Mansur, Deng Tianlong, Usmanov Ilham, Samadiy Murodjon

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of the study was the theoretical justification of the kinetic characteristics of the process of producing zinc chloride from zinc concentrate of the Khandiza deposit. For this, the effect of temperature and duration of the process of autoclave zinc extraction in a 28% hydrochloric acid solution was studied at a ratio of Zn: HCI = 1:1.1. Variable parameters were the temperature of 70, 80 and 90 °C and the duration of the leaching process of 6, 8 and 10 hours. The optimal parameters for the production of zinc chloride were determined.

The Study Of The Component Composition Of The Reaction Mixture Containing Formaldehyde Reaction Products, Hurramov Lochinbek, Alimukhamedova Nozima, Adilov Ravshan, Alimukhamedov Muzafar

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of this work is to study the effect of the conditions of the reaction of monoethanolamine (Meol) with formaldehyde (FD) on the composition of the reaction mixture. Interaction of monoethanolamine with formaldehyde leads to the formation of N,N’,N”-tris(β-oxyethyl) hexahydro-S-triazine or N,N-bisoxazolidine. The type of final product was determined by the conditions of the reaction and the molar ratio of aminoalcohol:formaldehyde. The chromatogram of the vacuum-distilled final product obtained at the molar ratio of monoethanolamine:formaldehyde=1:1 shows on an individual compound with a retention time of 4.173 s. With increase in the molar ratio of monoethanolamine:formaldehyde=1: 2, the final product …

Isotherm And Kinetics Study For The Adsorption Of Nitrate From An Aqueous Solution Using A Modified Rice Straw, Dalia A. Ali Eng, Mohamed A. Sadek Prof., Nagwa Mahmoud Al-Mansi Prof, Ahmad Wafiq Aboelnasr Dr.

Chemical Engineering

In this research, modified rice straw (MRS) is proposed. The proposed production process of the modified rice straw (MRS) adsorbent is carried out by precipitation of iron nano particles on the surface of acid activated rice straw. The nitrate adsorption is carried out through batch experiments. The optimum nitrate removal 94.8 % was achieved at pH = 7, adsorbent dose 3 = g/L, 150 rpm, initial nitrate concentration = 23 mg/L and contact time 180 = min. The new adsorbent synthesis, kinetics and isotherm models were studied. The nitrate adsorption was well described by pseudo second order kinetic model (R2 …

Recent Progress In Bifunctional Catalysts For Zinc-Air Batteries, Neng-Neng Xu, Jin-Li Qiao

Journal of Electrochemistry

Zinc-air battery has attracted great attention from researchers due to its high energy density and power density, which is expected to be widely used in energy conversion and storage. Air electrode as the core area of oxygen catalytic reaction is the focus of the entire zinc-air battery research. Recently, many research achievements have been made in non-noble metal bifunctional catalysts/electrodes with high activity, low cost and abundant species. In this review, we mainly focus on the reaction mechanism and the recent progress in non-noble metal oxide catalyst, carbon-based catalyst, and carbon-based transition metal compound composite and self-supporting electrode. In addition, …

Research Progress Of Metal-Nitrogen-Carbon Catalysts Toward Oxygen Reduction Reaction Inm Changchun Institute Of Applied Chemistry, Ming-Jun Xu, Jie Liu, Jun-Jie Ge, Chang-Peng Liu, Wei Xing

Journal of Electrochemistry

The development of highly active and stable catalysts toward oxygen reduction reaction (ORR) has been facing severe challenges. In recent years, pyrolytic M-N-C catalysts and metal-organic framework derived materials made the performance of non-noble metal catalysts greatly improved, however, the molecular and atomic level understanding in the reaction active sites and the mechanism are still lacking. Here, we summarize the recent research progress made in the Changchun Institute of Applied Chemistry. We present a microporous metal-organic-framework confined strategy toward the preferable formation of ORR catalysts. Firstly, we studied the active site and proposed a new active site structure for the …

Electrochemical Carbon Dioxide Reduction In Flow Cells, Jia Fan, Na Han, Yan-Guang Li

Journal of Electrochemistry

Electrochemical carbon dioxide reduction (CO₂RR) is an appealing approach to convert atmospheric CO₂ to value-added fuels and industrial chemicals, and may play an important role during the transition to a carbon-neutral economy. In order to make this technology commercially viable, it is essential to pursue CO₂RR in flow reactors instead of conventional H-type reactors, and to combine electrocatalyst development with system engineering. In this review, we overview the cell configurations and performance advantages of the two types of flow reactors, analyze their shortcomings, and discuss the effects of their different components including gas diffusion electrode …

Electrolyte Tailoring For Electrocatalytic Reduction Of Stable Molecules, Jin-Han Li, Fang-Yi Cheng

Journal of Electrochemistry

Reduction of stable molecules such as CO₂ and N₂ is important process in electrochemical energy conversion and storage technologies for electrofuels production. However, for the inert nature of CO₂/N₂ molecule and competitive proton reduction in conventional aqueous electrolytes, selective electrochemical carbon/nitrogen fixation suffers from high overpotential, low reaction rate and low selectivity. While addressing these issues has witnessed substantial advances in electrocatalysts, much less attention has been placed on the electrolytes, which play an important role in regulating the local environment and thus the performance of catalysts under operating conditions. Rational design of electrolytes has …

Fuel Cell Performance Of Non-Precious Metal Based Electrocatalysts, Yan-Feng Zhang, Fei Xiao, Guang-Yu Chen, Min-Hua Shao

Journal of Electrochemistry

The commercialization of proton exchange membrane fuel cells (PEMFCs) is hindered by high cost and low durability of Pt based electrocatalysts. Developing efficient and durable non-precious metal catalysts is a promising approach to addressing these conundrums. Among them, transition metals dispersed in a nitrogen (N)-doped carbon support (M-N-C) show good oxygen reduction reaction activity. This article reviews recent progress in M-N-C catalysts development, focusing on the catalysts design, membrane electrode assembly fabrication, fuel cell performance, and durability testing. Template-assisted approach is an efficient way to synthesize M-N-C materials with homogeneously dispersed single atom active site and reduced metal particles, carbides …

Recent Progress On Enhancing Effect Of Nanosized Metals For Electrochemical Co2 Reduction, Yu-Ning Zhang, Dong-Fang Niu, Shuo-Zhen Hu, Xin-Sheng Zhang

Journal of Electrochemistry

The electrochemical conversion of CO₂ to chemical raw material for further utilization shows promising future to alleviate global warming and realize carbon cycle in nature, which is of great significance to the green chemistry and sustainable development. This review briefly introduces the advantages of CO₂ electrochemical reduction (CO₂ER) and its basic reaction principles, and summarizes the recent progress in a series of activity enhancement strategies based on nanosized metal catalysts. The influences of alloy effect, interface engineering, synergistic effect, surface defect engineering and support effect on the catalytic performance of nanosized metals for CO₂ER …

Thermal Control Development Of A Proton Exchange Membrane Fuel Cell System, Ola Mohammed Taha Al-Shalash

Mechanical Engineering Theses

A fuel cell is an electrochemical energy conversion device that uses fuel to generate electricity. It basically converts the chemical energy of reactants directly into electricity without combustion. In a Proton Exchange Membrane Fuel Cell (PEMFC), the reactants, hydrogen and oxygen, are fed into the two electrodes, anode and cathode, respectively. A reaction takes place at each electrode and produces electricity, as well as water, and heat as the by-products. In order to maximize performance of a fuel cell, many factors can be considered for tuning and control. Temperature management is one of these factors.

A thermal-fluid model of a …

Optimization Of Nitrate Removal From Aqueous Solution By Acid-Activated Rice Straw Supported Nano Zero-Valent Iron Using Response Surface Methodology, Dalia A. Ali Eng, Nagwa Mahmoud Al-Mansi Prof, Mohamed Amin Sadek Prof., Ahmad Wafiq Abolnasr Dr.

Chemical Engineering

Rice straw is one of the most common agricultural wastes due to its large production amounts. Energy valorization of rice straw is a technology used for nitrate removal as the produced ashes used to generate the adsorbent by means of an alkali dissolution followed by acid precipitation. The novelty of the proposed process is that the production of the nano zero-valent iron supported acid-activated rice straw (AARS-nZVI) adsorbent is carried out without the energy valorization process but, through an acid activation for rice straw followed by precipitation of nZVI particles on its surface. The new adsorbent synthesis, characterization and application …

Development Of Novel Catalysts For Hydrogen Gas Production From Biomass Compounds, Boanerges Bamaca

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

Hydrothermal biomass gasification technologies (sub- and supercritical water gasification and aqueous-phase reforming) have considerable economic, environmental, and technical advantages over other energy-extensive technologies (e.g. natural gas reforming) for hydrogen gas production. However, lack of economically feasible and highly active catalysts is a main challenge that impedes upscaling of these technologies for hydrogen gas production.

The goal of this study was to develop innovative, economically feasible and active heterogeneous supported metal catalysts for hydrothermal processes for producing hydrogen gas from biomass-derived compounds. Because of its stable structure and chemical inertness, graphene was used as catalyst support. Graphene supported metal catalysts were …

Natural Latex-Capped Silver Nanoparticles For Two-Way Electrochemical Displacement Sensing Of Eriochrome Black T, Ziad Khalifa, Moustafa Zahran Dr, Magdy Zahran Prof, Magdi Abdel Azzem Prof

Chemical Engineering

No abstract provided.