Management and Operations Commons^™

Investigation Of An Avionics Part Deficiencies In Royal Saudi Air Force Fleets, Nasser S. Alanazi

Theses and Dissertations

The Royal Saudi Air Force (RSAF) is experiencing a shortage in certain avionics parts due to a lack of reliability. This issue is causing a supply chain disturbance in the F1-15 fleet and the Hawk fleet. One of the factors behind this problem is the environmental effects in Saudi Arabia .The study will investigate and analyze the methods for the Improvement Cycle Processes and the Quality Management within the RSAF repair cycle. Finding show that, the discrepancies are rising during summer and fall time due to the environment change, Other finding were addressed in the study.

Sortie-Based Aircraft Component Demand Rate To Predict Requirements, Thomas R. O'Neal

Theses and Dissertations

Weapon System Sustainment (WSS) costs are growing at an increasing rate despite the vast efforts to reduce them. Researchers have attributed much of the cost increase to inaccurate demand forecasts for weapon system spare parts. In 2011, the forecast to sustain all United States Air Force (USAF) aircraft was 19% accurate and WSS costs per year have continuously increased. The purpose of this study is to explore a parsimonious change to aircraft component forecasting to reduce costly forecast error. This study substitutes flying hours with sorties for the purpose of demand forecasting. Many F-16 and B-52 spare parts are evaluated …

Resilient Aircraft Sustainment: Quantifying Resilience Through Asset And Capacity Allocation, Zachary B. Shannon

Theses and Dissertations

Decision makers lack a clear, generalizable method to quantify how additional investment in inventory and capacity equates to additional levels of resilience. This research facilitates a deeper understanding of the intricacies and complex interconnectedness of organizational supply chains by monetarily quantifying changes in network resilience. The developed Area under the Curve metric (AUC) is used to quantify the level of demand that each asset allocation can meet during a disruptive event. Due to its applicability across multiple domains, the USAF F-16 repair network in the Pacific theater (PACAF) is modeled utilizing discrete event simulation and used as the illustrating example. …

Under Pressure: Decision Making In Aircraft Maintenance And The Role Of Gender, Stephanie Douglas Ph.D., Bettina M. Mrusek Ph.D.

National Training Aircraft Symposium (NTAS)

In aircraft maintenance, leaders are under near-constant pressure to maintain airworthiness. Every minute an aircraft cannot fly due to maintenance represents financial waste. Decisions are therefore made in a relatively quick fashion. A leader evaluates the situation, identifies a course of action and then communicates this message to a team of technicians. However, gender influences regarding leaders’ decisions can influence team members’ perceptions of those decisions.

The study will measure decision making methods of leaders in aircraft maintenance and the perceptions of the technicians. It informs how gender influences decision making from both the leader and follower perspective. The expected …

Revisiting Cost Index - The Challenge Of Calculating A Precise Figure For Brazilian Airliners, Joaquim Pedro De Albuquerque D'Orey, Guilherme Amaral Da Silveira

National Training Aircraft Symposium (NTAS)

Within numerous possibilities, Cost Index (CI) is the tool that can provide economic speeds and deliver the lowest cost for a given flight. Cost Index is a highly volatile number that shifts its optimum value in several different circumstances. Through the analysis of the Brazilian regulation, operation and infrastructure reality, this paper reviews several influencers that can interfere with the optimum CI value for a specific flight, aiming for maximum precision and economy. A structured questionnaire was submitted to pilots from four of the biggest Brazilian airliners operating under part 121. The purpose of this questionnaire was to investigate whether …

Inherent Jeopardy Of Performance Based Contracting Metrics: A Simulation Experiment, Daniel Cherobini

Theses and Dissertations

There is a growing trend across the world to adopt Performance Based Contracting strategies to support logistics systems. Using these policies, contract payments are strongly related to the performance achieved compared to prespecified metrics. However, managers are not always confident on what are the most suitable performance goals to use in these agreements. As a consequence, contractors struggle to deliver the desired performance results, while aircraft fleets experience an increase in support costs. And when the results are inadequate, leaders are tempted to impose even more performance targets to contractors, willing to exercise more control over the support organization. In …

The Effects Of Funding Gaps On Depot Maintenance Hours, Carlo S. D'Amato

Theses and Dissertations

The relationship between expenditures and readiness level is a topic of interest to military senior leaders, defense resource planners, and the American taxpayer alike. Senior leaders within the Air Force (AF) justify increased defense budgets by pointing to the potential adverse effects that decreased funding could have on military readiness. Resource planners within the AF are then tasked with the responsibility of ensuring that budgets are allocated most effectively to maximize the AF's ability to project airpower across a variety of contingency operations. This thesis investigates the relationship between budgets and readiness by examining the relationship between depot level funding …

Scenario-Based Strategic Planning For Future Civil Vertical Take-Off And Landing (Vtol) Transport, Woojin Choi, Steven Hampton

Journal of Aviation/Aerospace Education & Research

Rapid evolvement of the vertical take-off and landing (VTOL) technology in conjunction with recent robust R&D has demonstrated the technical feasibility of the civil VTOL system as a short-haul mass transit mode. Its combined benefits of a helicopter and a turboprop into one aircraft is expected to become an effective remedy for congested air traffic and difficulties with airport expansions in the metropolitan areas along with the potential benefit to improve accessibility to population centers and remote areas where conventional aircraft cannot access.

In this study, based on a the Political, Economic, Social, Technological, Environmental, and Legal (PESTEL) factors and …

Airport Ceos And The Decentralized System Of Airports: A Case Study, Marjan Mazza

Publications

The job of the airport CEO is complex with responsibility for the security and safety of a large and dynamic facility and, yet the FAA does not have regulatory qualification and performance standards for the position. The purpose of this qualitative multi-case study was to explore the primary attributes that could be the leading indicators in the event national standards for the hiring of airport CEOs are pursued at major commercial airports. The guiding conceptual framework of the study was to combine competency with the concept of training and development. Airport CEOs from six airport facilities were interviewed, and an …

A Conceptual Framework For Valuating Airline Frequent Flyer Program Miles, Yi Gao

International Journal of Aviation, Aeronautics, and Aerospace

Frequent flyer programs of airlines have gradually evolved into a multi-billion dollar business over the years. Valuing frequent flyer program miles accurately and fairly has its practical implications both for airlines and members of frequent flyer programs. As a ground-breaking academic study dedicated to airline loyalty programs, this study aims to build a conceptual framework to guide the valuation of miles. Through comparing required miles for different award types with their equivalent cash prices, this study has successfully addressed the purchasing power of AAdvantage miles of American Airlines when they are used for award redemption. Not only can this study …

Efficiency Analysis Of A Congested Brazilian Airport Applying Slots Optimization Control: Congonhas Airport Case, Mariana Franco B. Mendes, Rafael Roco De Araujo, Ana Paula Beck Da Silva Etges, Massoud Bazargan

International Journal of Aviation, Aeronautics, and Aerospace

The current slot allocation mechanism in Brazil, based on the International Air Transport Association (IATA) rules, and its supplementary local regulation The National Civil Aviation Agency (ANAC), displays a few issues and limitations (e.g. slot misuse, allocation inefficiencies). Such issues are particularly present in the case of busy airports that works near their maximum capacity for major parts of the day. This inefficiency problem is generated because of the complexity of slot allocation added to the limited decision support available for the Brazilian system. This study focuses on the implementation of an optimal slot model, based on IATA regulations with …

Order Fulfillment Errors And Military Aircraft Readiness, Michael Weber, Daniel Steeneck, William Cunningham

Faculty Publications

This paper aims to measure the effect of supply discrepancy reports (SDRs) on military aircraft readiness metrics, including aircraft availability, not mission capable supply (NMCS) hours, cannibalizations and mission-impaired capability awaiting parts (MICAP) hours.

Monthly SDR, NMCS, aircraft cannibalizations and MICAP data from 2009 to 2018 are analyzed using linear regression and independent samples t-tests to examine whether discrepant shipments negatively impact aircraft readiness.

Taking Off In Africa: Critical Elements Of Aircraft Engine Manufacturer Engagement That Can Affect Airline Safety Performance, Nathan Michael Woods

Antioch University Dissertations & Theses

Original Equipment Manufacturer (OEM) is a term used in many industries to describe a company that produces parts and equipment that may be marketed by another manufacturer. In the aviation industry, the aircraft engine OEM refers to the company the manufactures engines powering the aircraft. The OEM manufactures the engine, defines the required maintenance to operate the engines, and recommends product modifications. Product modifications are recommended to improve product safety, durability, reliability, and cost of ownership and are formally communicated through issuance of service bulletins. Properly performing the required maintenance and adopting service bulletins is an important element of maintaining …