Space Vehicles Commons^™

Space Environment-Ii Lecture - Powerpoint Presentation, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

Professor Bob Twiggs' lecture on Space Environment-II PowerPoint presentation delivered on December 3, 2012.

Cubesat: From The Beginning To Who Knows Where, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint presentation created by Professor Bob Twiggs titled "CubeSat: From the Beginning to Who Knows Where" from November 13, 2012.

Small-Satellites For Arctic And Maritime Operations And Research, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint presentation created by Professor Bob Twiggs titled "Small-Satellites for Arctic and Maritime Operations and Research" from November 9, 2012.

Cubesat, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint presentation created by Professor Bob Twiggs titled "CubeSat" from November 7, 2012.

A Gap Analysis Of Meteorological Requirements For Commercial Space Operators, Nicholas J. Stapleton

Doctoral Dissertations and Master's Theses

Commercial space companies will soon be the primary method of launching people and supplies into orbit. Among the critical aspects of space launches are the meteorological concerns. Laws and regulations pertaining to meteorological considerations have been created to ensure the safety of the space industry and those living around spaceports; but, are they adequate? Perhaps the commercial space industry can turn to the commercial aviation industry to help answer that question. Throughout its history, the aviation industry has dealt with lessons learned from mishaps due to failures in understanding the significance of weather impacts on operations. Using lessons from the …

The Us Challenge To Stay The Worlds Technical Leader In Innovation, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint presentation created by Professor Bob Twiggs titled "The US Challenge to Stay the Worlds Technical Leader in Innovation" from October 18, 2012.

The Corona Reconnaissance Satellite Program, Amy Parlett

Von Braun Symposium Student Posters

No abstract provided.

100k High Altitude Student Rocket, Markus Murdy

Von Braun Symposium Student Posters

No abstract provided.

Validation Of The Ballistic Limit Equation For Monolithic Aluminum Shielding At Geostationary Orbital Debris Impact Velocity, Brandon Holladay

Aerospace Engineering

The Cal Poly Electro Magnetic Rail Gun was used to eject a 0.370 gram, rectangular aluminum projectile towards a 1/16 inch monolithic aluminum plate at a speed of 280 ± 50 m/s. The resulting impact left a large attached spall on the back of the shielding. The impact damage was compared to an industry ballistic limit equation for a spherical aluminum projectile of similar diameter and was shown to have slightly less damage than the expected results.

In addition, an aluminum mesh double bumper shield was fired upon in order to verify its higher protection per aerial density as well …

Configuration Studies Of Electrostatic And Magnetostatic Active Space Radiation Shielding, Trac K. Nguyen

Electrical & Computer Engineering Theses & Dissertations

Developing successful and optimal solutions for mitigating the hazards of radiation in deep space is critical for the success of deep-space long duration explorations, including mission to the Moon, Mars and beyond. A recent report (Tripathi et al., 2008) had explored the feasibility of using electrostatic shielding in conjunction with state-of-the-art materials shielding technologies.

In this thesis research, we study the active electrostatic shielding strategy and examine a hybrid configuration that utilizes both electrostatic and magnetostatic fields. The main advantages of this system are shown to be: (i) much lower magnetic fields that could be below the thresholds set for …

Educating Undergraduate Space Science Students With Real Space Missions: Nanosatellite And Nanolab Missions In Kentucky, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint presentation created by Professor Bob Twiggs titled "Educating Undergraduate Space Science Students with Real Space Missions: NanoSatellite and NanoLab Missions in Kentucky" from September 27, 2012.

Operationally Responsive Spacecraft Using Electric Propulsion, Thomas C. Co

Theses and Dissertations

A desirable space asset is responsive and flexible to mission requirements, low-cost, and easy to acquire. Highly-efficient electric thrusters have been considered a viable technology to provide these characteristics; however, it has been plagued by limitations and challenges such that operational implementation has been severely limited. The technology is constantly improving, but even with current electric propulsion, a spacecraft is capable of maneuvering consistently and repeatedly in low-Earth orbit to provide a responsive and flexible system. This research develops the necessary algorithm and tools to demonstrate that EP systems can maneuver significantly in a timely fashion to overfly any target …

Proposed Msu Matchbooksat For Iss Launch 2014, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint presentation created by Professor Bob Twiggs titled "Proposed MSU MatchBookSat for ISS Launch 2014" from September 6, 2012.

Optimal Slewing Of A Constrained Telescope Using Seventh Order Polynomial Input Torques, Julia K. Bush

Master's Theses

Two-axis gimbals are frequently used to point cameras and telescopes at various points of interest for surveillance, science, and art. The rotation of a two-axis gimbal system is governed by nonlinear angular momentum equations of motion. This paper presents a method for slewing a telescope in space with a gimbaled sensor attached to a nominally non-rotating spacecraft using two seventh order polynomial input functions to characterize torques. To accomplish this task, picking the optimal coefficients of the seventh order polynomial was necessary. It was also desired to use constraint equations to limit the excursion, angular velocity, angular acceleration, and jerk …

Where Did All Those Launches Come From? Or What Can We Do Now That We Have Launches?, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint presentation created by Professor Bob Twiggs titled "Where did all those Launches come from? Or What can we do now that we have launches?" from August 11, 2012.

Tiny Satellites For Stem, Carlos G. Niederstrasser

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint presentation created by Carlos G. Niederstrasser titled "Tiny Satellites for STEM" from July 13, 2012.

The Effects Of Familiarity And Persuasion On Risk Assessment, Casey L. Smith

Doctoral Dissertations and Master's Theses

Cognitive biases influence decisions and the analyses of risk. They are often derived from two separate processes: bias based on familiarity (familiarity bias) and bias as the result of influences from outside sources (persuasion bias). Research suggests that familiarity-based bias may lead to acceptance of an activity's drawbacks and a leniency of its risks.

In addition, research has tried to measure and analyze different types of biases individually, but few have compared the interactions of more than one bias at once. Because different biases may derive from different mental phenomena it is important to tease out the distinctions, and observe …

Interstellar Mission To Gliese 581, Brock Schmalzel, Brian Tsoi

Aerospace Engineering

This report details a conceptual design for a one-way, interstellar mission, based upon assumed technological advances over the next few hundred years. It addresses the unique challenges associated with an interstellar mission, looking at both developed and theoretical technologies. This report looks specifically at propulsion systems required to reach an exoplanet. In addition, the power, communication, and orbital trajectories are analyzed to see the differences and technological advancements necessary for future missions and the proposed interstellar mission. The destination for the interstellar mission in Gliese 581, a star system located 20.3 light years away and has 5 known planets and …

Development Of A Pyrotechnic Shock Simulation Apparatus For Spacecraft Applications, Joseph Binder, Matthew Mccarty, Chris Rasmussen

Aerospace Engineering

This report details the research, design, construction, and testing of a pyrotechnic shock simulation apparatus for spacecraft applications. The apparatus was developed to be used in the Space Environments Lab at California Polytechnic State University. It will be used for testing spacecraft components with dimensions up to 24”x12”x12” as well as CubeSats. Additionally, it may be used as an instructional or demonstrational tool in the Aerospace Department’s space environments course. The apparatus functions by way of mechanical impact of an approximately 20 lb stainless steel swinging hammer. Tests were performed to verify the simulator’s functionality. Suggestions for improvement and further …

Thermal Vacuum Integration For Cal Poly's Space Environments Laboratory, Chelsea Barackman, Steven Jackowski

Aerospace Engineering

The purpose of the senior project is to construct a thermal vacuum by utilizing a preexisting vacuum chamber in the Space Environments Lab, and a donated Advanced Thermal Sciences (ATS) chiller. While a thermal vacuum is already available on campus, building one for the Space Environments Lab would grant undergraduates access to the equipment, allowing a much better understanding of testing methods and procedures in use by the aerospace industry. This paper explains the design and analysis of the thermal vacuum (T-VAC) project as well as the operation and procedures required for the ATS chiller and fill/drain tank. The thermal …

Multi-Dimensional Modeling Of Charring Ablators, Haoyue Weng, Huaibao Zhang, Ovais U. Khan, Alexandre Martin

Mechanical Engineering Faculty Publications

Re-entry of a spacecraft occurs at the hypersonic regime where the flow field is extremely complex: high temperature gradients occurring in the shock-layer region ionize and dissociate the air. Even if a large portion of heat generated during this process is convected away in the surrounding air, a fraction of it is still transferred to the vehicle. Therefore, it is important to protect the vehicle with a suitable kind of shielding. Of the many techniques available today, use of ablative material is gaining popularity. The basic idea behind an ablating heat shield is that the energy incident on the spacecraft …

De-Orbiting Upper Stage Rocket Bodies Using A Deployable High Altitude Drag Sail, Robert A. Hawkins Jr., Joseph A. Palomares

Aerospace Engineering

This report examines the effectiveness of a drag sail to de-orbit upper stage rocket bodies. Many other perturbations contribute to the de-orbiting of these rocket bodies, and these perturbations will also be discussed briefly. This paper will show the length of time needed to force the altitudes of various launch vehicle stages with varying drag area sizes to less than 100 km. The upper stage of the Delta IV launch vehicle in an orbit with an altitude of 500 km will naturally de-orbit in 720 days but when equipped with a 20 m² drag sail, it will de-orbit in …

Preliminary Design Of A Laboratory Cylindrical Hall-Effect Thruster, Scott Mcgrail, Sam Parker

Aerospace Engineering

A 3-cm cylindrical Hall thruster with permanent magnets was designed and modeled. The goal was to design a Hall thruster for Cal Poly’s propulsion laboratory of similar size and performance as Cal Poly’s MiXI thruster. The design process began with an investigation into the physics of Hall thrusters and selection of certain thruster parameters. The selected parameters were the diameter and depth of the channel, the total power input to the system, the discharge supply voltage, the cathode voltage, and the propellant flow rates to the anode and cathode. These parameters were used to determine the operational characteristics of the …

Reliable Software Updates For On-Orbit Cubesat Satellites, Sean Fitzsimmons

Master's Theses

CubeSat satellites have redefined the standard solution for conducting missions in space due to their unique form factor and cost. The harsh environment of space necessitates examining features that improve satellite robustness and ultimately extend lifetime, which is typical and vital for mission success. The CubeSat development team at Cal Poly, PolySat, has recently redefined its standard avionics platform to support more complex mission capabilities with this robustness in mind. A significant addition was the integration of the Linux operating system, which provides the flexibility to develop much more elaborate protection mechanisms within software, such as support for remote on-orbit …

Implementation Of A ¼ Inch Hollow Cathode Into A Miniature Xenon Ion Thruster (Mixi), David Wayne Knapp

Master's Theses

Over the last decade, miniature ion thruster development has remained an active area of research do to its low power, low thrust, and high efficiency, however, due to several technical issues; a flight level miniature ion thruster has proved elusive. This thesis covers the design, fabrication, assembly, and test of an altered version of the Miniature Xenon Ion thruster (MiXI), originally developed by lead engineer Dr. Richard Wirz, at the California Institute of Technology (Caltech). In collaboration with Dr. Wirz, MiXI-CP-V3 was developed at Cal Poly San Luis Obispo with the goal of implementing of a ¼ inch hollow cathode …

Sun-Synchronous Orbit Slot Architecture Analysis And Development, Eric Watson

Master's Theses

Space debris growth and an influx in space traffic will create a need for increased space traffic management. Due to orbital population density and likely future growth, the implementation of a slot architecture to Sun-synchronous orbit is considered in order to mitigate conjunctions among active satellites. This paper furthers work done in Sun-synchronous orbit slot architecture design and focuses on two main aspects. First, an in-depth relative motion analysis of satellites with respect to their assigned slots is presented. Then, a method for developing a slot architecture from a specific set of user defined inputs is derived.

Spacecraft And Propulsion Technician Error, Daniel Clyde Schultz

Doctoral Dissertations and Master's Theses

Commercial aviation and commercial space similarly launch, fly, and land passenger vehicles. Unlike aviation, the U.S. government has not established maintenance policies for commercial space. This study conducted a mixed methods review of 610 U.S. space launches from 1984 through 2011, which included 31 failures. An analysis of the failure causal factors showed that human error accounted for 76% of those failures, which included workmanship error accounting for 29% of the failures. With the imminent future of commercial space travel, the increased potential for the loss of human life demands that changes be made to the standardized procedures, training, and …

Comm-Multiple Access - Slides, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Professor Bob Twiggs on "Comm-Multiple Access" from April 24, 2012.

Ec 723 Satellite Communication Systems, Mohammed Khedr

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Professor Mohammed Khdr titled "EC 723 Satellite Communication Systems" from April 10, 2012.

Space Science And Astrophysics Programs, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint presentation created by Professor Bob Twiggs titled "Space Science and Astrophysics Programs" from April 9, 2012.