Astrodynamics Commons^™

Project Scrappie (Clear Constellation), Jacob Bertram, Jacob Britt, Bill Ngo, Mike Diesing

Senior Design Project For Engineers

Clear Constellation™ is a nationwide competition hosted by Rubicon® to combat the growing problem of space debris in Low Earth Orbit. Project Scrappie is our team’s solution to this problem. Scrappie is an autonomous apparatus will make use of Whipple shield technology to collide with debris at high velocities and effectively destroy the debris throughout selected orbital paths.

Developing A Light Curve Simulation Tool For Ground And Space-Based Observations Of Spacecraft And Debris, Andrew T. Ochoa

Master's Theses

A light curve is a plot of brightness versus time of an object. Light curves are dependent on orbit, attitude, surface area, size, and shape of the observed object. Using light curve data, several analysis methods have been developed to derive these parameters. These parameters can be used for tracking orbital debris, monitoring satellite health, and determining the mission of an unknown spacecraft.

This paper discusses the development, verification, and utilization of a tool that simulates light curve data. This tool models ground-based observations, space-based observations, self-shadowing geometry, tumbling debris, and controlled spacecraft. The main output from the tool is …

On The Mobility Of Small Aperture Telescopes For Initial Orbit Determination And Apparent Magnitude Derivation Of Low Earth Satellites, Jonathan Ian Hernandez

Master's Theses

Maintaining Space Domain Awareness (SDA) of satellites in low Earth orbit (LEO) requires effective methods of tracking and characterization. Optical measurements of these objects are generally sparse due to limited access intervals and high angular rates. Light pollution and geographic obstructions may also preclude consistent observations. However, a mobile small aperture telescope grants the ability to minimize such environmental effects, thereby increasing capture likelihoods for objects within this regime. By enhancing LEO satellite visibility in this way, extensive orbital and visual data are obtainable.

An 8-inch Meade LX200GPS telescope equipped with a Lumenera SKYnyx2-0M CCD camera comprises the system that …

Design, Development, And Testing Of Embedded Computing On Afit's Control & Autonomy Space Proximity Robot (Caspr), Collin A. Gwaltney

Theses and Dissertations

This thesis reviews RPO algorithm testbeds and discusses the development of the Control and Autonomy Space proximity Robot (CASpR) kinematic testbed housed at the Air Force Institute of Technology (AFIT). CASpR operates on a rail system to propagate the trajectories of two satellites using the Hill-Clohessy-Wiltshire (HCW) Equations of Motion (EOMs). In this study, the implementation of a Jetson TX2i as an onboard flight computer is discussed and accomplished. Each hardware component used in the process of adding embedded computing as well as the software and paths of communication are all discussed in detail. Tests are conducted to assess the …

Satellite Deceleration Using Gravity Assist From Asteroid, Nicolas M. Prulhiere

Doctoral Dissertations and Master's Theses

Satellites have used gravity assists to increase their speed when exploring the solar system. This same maneuver can be done but with the objective to slow down the satellites. This has been theorized to slow down asteroids using the moon to capture them in earth’s orbit. My goal is to determine if asteroids can be used to provide a change in speed great enough to the point that after multiple of these maneuvers the satellite can come to a stop. By being able to slow down and stop a satellite without having to use thrusters will allow the mass allocated …

Optimization Of Interplanetary Transfer Trajectories Using The Invariant Manifolds Of Halo Orbits, Ryan Yedinak

Master's Theses

Traditionally, two-body dynamics have been used to design orbital trajectories for interplanetary missions using a series of Lambert’s transfers and gravity assists. Although these are reliable methods, they have extremely high fuel requirements, especially for missions to outer planets. From an orbital mechanics perspective, three ways of reducing fuel requirements for these types of missions are utilizing low energy transfer trajectories, applying low thrust engine parameters, and implementing orbit optimization techniques.

The goal of this thesis is to combine low energy transfers created from the dynamics of the Circular Restricted Three-Body Problem (CRTBP) with low-thrust orbit optimization techniques to develop …

Stochastic Satellite Air Drag With The Ballistic Coefficient As A Random Variable, Everett B. Palmer Iv

Theses and Dissertations

The drag acceleration caused by the Earth's atmosphere is a significant cause of prediction uncertainty for low Earth orbit satellites. Most existing research has focused on improving deterministic atmospheric density predictions or on density as a random variable. This research investigates a new paradigm and focuses on modeling the uncertainty caused by air drag using the ballistic coefficient, a component of air drag that is independent of the model used to predict atmospheric density. Time series of ballistic coefficient values were calculated and analyzed as random processes. These random processes were then used as the foundation of a stochastic satellite …

Autonomous Mission Planning For Spacecraft Rendezvous And Proximity Operations, Julia C. Bell

Theses and Dissertations

The evolving space environment has created a demand for autonomous spacecraft that can maneuver in complex and sometimes contentious environments. Constraint enforcement, such as an avoidance zone to prevent collision with a target, is a key component of autonomous control to ensure safety and performance requirements are met. Finite-horizon Model Predictive Control (MPC) is a popular control method due to its improved computation time while optimizing performance. Two areas of MPC in need of expansion are time-varying constraints and phase transitions in multi-phase applications. In this work, MPC is employed to track the reference trajectory of a multi-phase satellite inspection …

Passive Disposal Of Launch Vehicle Stages In Geostationary Transfer Orbits Leveraging Small Satellite Technologies, Marc Alexander Galles

Master's Theses

Once a satellite has completed its operational period, it must be removed responsibly in order to reduce the risk of impacting other missions. Geostationary Transfer Orbits (GTOs) offer unique challenges when considering disposal of spacecraft, as high eccentricity and orbital energy give rise to unique challenges for spacecraft designers. By leveraging small satellite research and integration techniques, a deployable drag sail module was analyzed that can shorten the expected orbit time of launch vehicle stages in GTO. A tool was developed to efficiently model spacecraft trajectories over long periods of time, which allowed for analysis of an object’s expected lifetime …

Adaptive-Optimal Control Of Spacecraft Near Asteroids, Madhur Tiwari

Doctoral Dissertations and Master's Theses

Spacecraft dynamics and control in the vicinity of an asteroid is a challenging and exciting problem. Currently, trajectory tracking near asteroid requires extensive knowledge about the asteroid and constant human intervention to successfully plan and execute proximity operation. This work aims to reduce human dependency of these missions from a guidance and controls perspective. In this work, adaptive control and model predictive control are implemented to generating and tracking obstacle avoidance trajectories in asteroid’s vicinity.

Specifically, direct adaptive control derived from simple adaptive control is designed with e modification to track user-generated trajectories in the presence of unknown system and …

Adaptive Control For Nonlinear, Time Varying Systems, John Zelina

Doctoral Dissertations and Master's Theses

It is common for aerospace systems to exhibit nonlinear, time varying dynamics. This thesis investigates the development of adaptive control laws to stabilize and control a class of nonlinear, time varying systems. Direct adaptive control architectures are implemented in order to compensate for time varying dynamics that could, for example, be caused by varying inertia resulting from fuel slosh or settling in a tank. The direct adaptive controller can also respond to external disturbances and unmodeled or nonlinear dynamics. Simulation results are presented for a prototype system that consists of two rotating tanks with time varying inertia due to the …

Applied Reachability Analysis For Time-Optimal Spacecraft Attitude Reorientations, Layne C. Barrett

Theses and Dissertations

Satellite attitude reorientation has been of significant interest in astronautical engineering, and being able to reorient in a time-optimal manner has been of exceeding interest since the 1970s. Ensuring a spacecraft mission set can be conducted within a certain amount of time begs the question of whether or not a certain maneuver can be completed with a bounded control. This thesis answers that question by using the concept of reachability to provide reachable sets for different spacecraft reorientation scenarios. The reachable sets generated provide a range of initial states that guarantee a satellite reach a desired end orientation given a …

Next-Generation Re-Entry Aerothermodynamic Modeling Of Space Debris Using Machine Learning, Nicholas Sia

Graduate Theses, Dissertations, and Problem Reports

The number of resident space objects re-entering the atmosphere is expected to rise with increased space activity over recent years and future projections. Predicting the survival and impact location of the medium to large sized re-entering objects becomes important as they can cause on ground casualties and damage to property. Uncertainties associated with the re-entry process makes necessary a probabilistic approach, which can be computationally expensive when using high-fidelity numerical methods for estimating aerothermodynamic properties. To date, object-oriented analysis is the dominant tool used for atmospheric re-entry modeling and simulation, where aerothermodynamic coefficients are used to determine the risk a …

Updates And Improvements To The Satellite Drag Coefficient Response Surface Modeling Toolkit, Phillip Logan Sheridan

Graduate Theses, Dissertations, and Problem Reports

For satellites in Low Earth Orbit, the drag coefficient is a major area of uncertainty. Researchers at the Los Alamos National Laboratory have created a Response Surface Modeling (RSM) toolkit to provide the community with a resource for simulating and modeling satellite drag coefficients in Free Molecular Flow. The toolkit combines the high fidelity of numerical simulation techniques with the speed of regression modeling. Specifically, it uses a training sample of drag coefficients simulated with the Test Particle Monte Carlo method with the robust Gaussian Process Regression approach. The RSM toolkit is the prime process to become a toolkit of …