Aerodynamics and Fluid Mechanics Commons^™

Optimal Integrated Cfd-Gnc Model For Drag-Based Reentry Dynamics, Sebastian Lopez

Doctoral Dissertations and Master's Theses

This research focuses on optimizing the control of a drag-maneuvering, Starship-class re-entry vehicle by closely integrating high-fidelity aerodynamic data derived from Computational Fluid Dynamics (CFD) simulations, specifically using StarCCM+. The aerodynamic models, tailored to the unique geometry of a drag-maneuvering body, are seamlessly incorporated into a guidance, navigation, and control (GNC) framework. This integration enables closed-loop CFD simulations with real-time control feedback, allowing for direct analysis and optimization of vehicle stability, trajectory, and control demands throughout the re-entry process.

Building upon the work of Gaglio and Bevilacqua, this advanced CFD-GNC model introduces high-order aerodynamic effects, such as aerodynamic moments and …

Development Of A Liquid Propellant Rocket Engine With Integrated Water-Based Cooling Jacket, Mauricio Bautista, Jesus Cortes, Christian Lopez, Hugo Robles, Will Owens, Josh Sutton, Jayden Pace, Shelby Enlow

Create@State

This projects describes the development of a liquid rocket engine with a metal casted cooling jacket. We test the system and provide simulation data for the project.

Effect Of Nozzle Pressure Ratio On Thrust And Flow Behavior In A Supersonic De Laval Nozzle, Esha Jain

Doctoral Dissertations and Master's Theses

Supersonic nozzles operate across a range of flow regimes. While an ideally expanded condition yields optimal thrust, practical propulsion systems rarely operate at this design point due to variations in altitude and engine operating conditions. As a result, nozzles frequently operate in off-design conditions. In overexpanded regime, where the exit pressure is lower than the ambient pressure, shock-induced separation may occur within the divergent section of the nozzle, potentially degrading nozzle performance. Understanding the aerodynamic behavior of nozzles operating under off-design conditions is therefore important for improving propulsion system performance and stability. In particular, direct thrust measurements provide a key …

Multiphysics Transport In Porous Thermal Protection Systems: Experimental Characterization Of Gas Permeability And Radiative Properties, Yejajul Hakim

Theses and Dissertations--Mechanical and Aerospace Engineering

Porous thermal protection systems (TPS) used in hypersonic vehicles exhibit coupled gas and radiative transport across multiple regimes and length scales. Accurate performance prediction requires reliable characterization of permeability, slip-flow behavior, and radiative transport properties, particularly for low-permeability and charred materials where existing data are limited. This dissertation presents experimental methods for characterizing multiphysics transport in porous TPS materials. A modular flow system was developed to measure permeability and slip behavior in both virgin and charred materials under relevant environments. A transient pressure decay method enables accurate permeability estimation in low-permeability regimes and provides insight into effective pore structure. Results …

Thermal Radiation Effects On Particles From Plasma Arc Radiation, Reece Davis, Joseph Mcgee

Williams Honors College, Honors Research Projects

Understanding the radiation heating and transport of both microparticles and nanoparticles is a phenomenon that is critical for both space and Earth sciences. In space, these particles are heated by plasma arcs within ionized space clouds or solar flares and can be present the path of deep space missions and orbital satellites. While on Earth, processes such as forest fires, nuclear fusion, and microchip manufacturing include the plasma arc heating of particles. These particles lay within the Mie Scattering Regime and Rayleigh Scattering Regime and emit radiation differently based on their diameter. New mathematical and computational modeling has been conducted …

L2 Certification Rocket Launch, Seungyou Cho

SACAD: Scholarly Activities

The LOC 835 high-power rocket with J275W-12 motor at Argonia, KS, for L2 certification, was auspiciously launched and returned. J means the motor can exert 640-1280 Ns of impulse, which makes a sizeable propelling sound. Even though four main hindrances occurred from the construction to the launch, the issues were revised correctly. The rail button and the tracker were severe issues, so I devised the method of drilling a hole for the rail button, but there was no way to replace a broken tracker. The wind speed on the launch day was so strong that the rocket flew 1-2 miles …

Kentucky Re-Entry Universal Payload System (Krups): Second Atmospheric Re-Entry Flight, Kirsten F. Ford

Theses and Dissertations--Mechanical and Aerospace Engineering

Kentucky Re-entry Universal Payload System (KRUPS) is a small-scale re-entry capsule developed at the University of Kentucky. The KRUPS project began in 2013 with the aspiration of providing an affordable and repeatable method of collecting data on the re-entry environment. Numerically-based methods used to model re-entry require experimental data to validate their predictions. However, re-entry data is not easily obtained. Flight tests of re-entry vehicles require extensive time and resources, including a substantial financial burden. Alternatively, ground testing is not able to accurately and completely replicate the complex re-entry environment. Thus, there is a need for an inexpensive and accessible …

Experimental And Numerical Analysis Of Laminar And Transitional Flow Through Annular Corrugated Pipes, Joseph Russell Sargent

Theses and Dissertations

This dissertation presents studies on pressure loss through annular corrugated pipes to determine a friction factor coefficient using nitrogen. Ten different corrugated pipes’ geometries were evaluated via testing and experimentation. The ratio of corrugation height to inner diameter varied from 0.233 to 0.333 and the ratio of corrugation pitch to inner diameter varied from 0.181 to 0.446. Nitrogen flow rates between 0.25 to 94.4 standard liters per minute were used, resulting in Reynolds numbers, based on the corrugated pipe inner diameter, from 100 to 23,000. The experimental set-up was validated using smooth-pipe pressure loss measurements and the derived friction factor …

Martian Atmospheric Rover Simulation (M.A.R.S.), Matt Berard, Shelby Beddard, Alexander Brunette, Emma Conti, Collin Duke, Delaney Novak, Keelin Weaver

Aerospace, Physics, and Space Science Student Publications

While rovers have been used by various agencies to explore Mars, their travel is limited by terrain obstacles, which may prevent mission completion. Creating a vehicle equipped with both driving and flight capabilities would allow greater range of motion on extraterrestrial planets. Integrating the technology for both transportation modes into one rover allows for efficiency and advancements in technological and planetary research.

Development Of Advanced Instrumentation For High-Enthalpy Flow Characterization For The Onr-Uta Arc-Jet ”Leste” Facility, Ian Raybon

Mechanical and Aerospace Engineering Dissertations - Archive

Sustained hypersonic flight is an exceedingly challenging task comprised of a myriad of complex physical processes. At hypersonic speeds, which is defined by the presence of unique phenomena like high-temperature nonequilibrium flow, viscous and vorticity interactions, and thin shock layers, which are not seen in supersonic, transonic, or subsonic vehicles, the vehicle design is principally driven by the high levels of aerodynamic heating caused by the conversion of kinetic energy to internal energy. Gaining an understanding of how these physical processes interact with each other is required to develop a design methodology for this class of vehicles. Arc-jet wind tunnels …

Steady And Transient Study Of Conjugate Heat Transfer In Regenerative Cooled Nozzle, Khaled Bensayah, Khadidja Kamri

Emirates Journal for Engineering Research

The Heat transfer is one of the most serious challenges that exist in a supersonic nozzle flow. The combustion chamber wall and the nozzle are exposed to high-temperature gases during combustion and gas expansion, which can eventually lead to structural failure. This paper reports a computational study of steady and transient conjugate heat transfer in regenerative water cooled nozzle. Numerical computation solved Reynolds-averaged equations based on RSM-Omega turbulence model coupling with solid-phase heat conduction equation and with coolant-phase. The effect of four inlet cooled approach length 0 inch, 6 inch, 12 inch and 18 inch are studied and validated against …

State Space Modeling And Estimation Of Flexible Structure Using The Theory Of Functional Connections, Carlo Lombardi, Riccardo Bevilacqua

Student Works

In this work, we present a novel method to model the dynamics of a continuous structure based on measurements taken at discrete points. The method is conceived to provide new instruments to address the problem of flexible dynamics modeling in a spacecraft, where an effective mathematical representation of the non-rigid behavior of the is of critical importance in the design of an effective and reliable attitude estimation and control system. Both the measurements and the model that describes the structure can be affected by uncertainty. The purpose of the developed method is to estimate the position and the velocity of …

The Influence Of Mixing Duct Length And Phase Of Flight On Wall Temperatures Of A Rocket Based Combined Cycle Engine In Ejector And Air-Augmented Modes, Jonathan Grow

Doctoral Dissertations and Master's Theses

Rocket Based Combined Cycle (RBCC) engines have been theorized as a possible means of powering launch vehicles and high-speed atmospheric vehicles. By incorporating aspects of both air-breathing and rocket propulsion, RBCC engines promise up to a 230 % increase in specific impulse over traditional chemical rocket propulsion by entraining a secondary flow of atmospheric air and mixing it with the exhaust of a rocket motor. Students within the Embry-Riddle Future Space Explorers and Developers Society (ERFSEDS) identified a
problem of excessive heating and structural failure of the mixing duct during launch and transonic flight of a student-built flight test vehicle. …

Probabilistic Short Term Solar Driver Forecasting With Neural Network Ensembles, Joshua Daniell

Graduate Theses, Dissertations, and Problem Reports (ETD)

Commonly utilized space weather indices and proxies drive predictive models for thermosphere density, directly impacting objects in low-Earth orbit (LEO) by influencing atmospheric drag forces. A set of solar proxies and indices (drivers), F_10.7, S_10.7, M_10.7, and Y_10.7, are created from a mixture of ground based radio observations and satellite instrument data. These solar drivers represent heating in various levels of the thermosphere and are used as inputs by the JB2008 empirical thermosphere density model. The United States Air Force (USAF) operational High Accuracy Satellite Drag Model (HASDM) relies on JB2008, and …

Optical Microresonator-Based Flow-Speed Sensor, Elie Ramon Salameh

Mechanical Engineering Research Theses and Dissertations

Optical sensors have become more prominent in atmospheric measurement systems, with LiDAR instruments deployed on a variety of earth-bound, air-borne, and space-based platforms. In recent years, the interest in the human exploration of Mars has created a substantial push towards reliable and compact sensing elements for Mars exploration missions, particularly during a spacecraft’s entry, descent, and landing stages. Real-time sensors able to reliably measure the craft’s speed relative to the surrounding atmosphere during these stages are thus of great interest. In this dissertation, a proof-of-concept for an optical microfabricated sensor, which leverages the whispering-gallery-mode (WGM) and Doppler shift principles, is …

A Decoupled Engineering Methodology For Accurate Prediction Of Ablative Surface Boundary Conditions In Thermal Protection Systems, Justin Cooper

Theses and Dissertations--Mechanical and Aerospace Engineering

The main objective of the present work is to demonstrate a method for prediction of aerothermal environments in the engineering design of hypersonic vehicles as an alternative to the current heritage method. Flat plate and stagnation point boundary layer theory require multiple assumptions to establish the current engineering paradigm. Chief among these assumptions is the similarity between mass and heat transfer. Origins of these assumptions are demonstrated and their relationship to conservative engineering design is analyzed, as well as conditions where they possibly break down. An alternative approach for assessing aerothermal environments from the fluid domain is presented, which permits …

Co2 Based Parachute Deployment, Anthony M. S. Settlemier, Nicholas Motter

Williams Honors College, Honors Research Projects

This paper describes the design process of a CO2 based parachute deployment system for the Akronauts Rocket Design team, with particular emphasis on the selection of methodologies of deployment as well as design iteration. The objective was to create a fully mechanical system in order to replace the black powder based systems that were used previously by the team.

Emphasis was put in creating a system that would function well at higher altitudes while also preventing damage to the parachute during deployment. This system emphasizes robustness under launch conditions.

Cfd And Heat Transfer Analysis Of Rocket Cooling Techniques On An Aerospike Nozzle, Geoffrey Sullivan

College of Graduate Studies: Theses & Dissertations

In recent years the development of rocket engines has been mainly focused on improving the engine cycle and creating new fuels. Rocket nozzle design has not been changed since the late 1960s. Recent needs for reliable and reusable rockets, as well as advancements in additive manufacturing, have brought new interest into the aerospike nozzle concept. This nozzle is a type of altitude adjusting nozzle that is up to 90% more efficient than bell nozzles at low altitudes and spends up to 30% less fuel. Since the nozzle body is submerged in the hot exhaust gasses it is difficult to keep …

Preliminary Development Of The Dialysis-Membrane-Based Passive Biocide Delivery System For Spacecraft Water Recovery Units, Rogelio Elias Garcia Fernandez

Graduate Theses and Dissertations

The purpose of this investigation is to explore the capabilities of a dialysis-membrane-based system for the in-line dosing of silver ions to treated water in spacecraft water recovery units. The spacecraft environmental control and life support system community (ECLSS) are interested in adopting silver ions as a biocide in future spacecraft water recovery processes since silver ions are effective biocide at concentrations that humans can safely consume. The system has been designed following the configuration of the Water Processor Assembly (WPA) aboard the International Space Station. In this configuration, silver ions have to be added at the last step in …

Numerical Analysis Of Aerospike Engine Nozzle Performance At Various Truncation Lengths, Sam Dakka Dr, Oliver Dennison

International Journal of Aviation, Aeronautics, and Aerospace

The aerospike engine was first devised in the early 1960s where it provided new means of reaching orbit in a single stage. The paper aimes to demonstrate the viability of the technology by showcasing the increased nozzle thrust efficiency over the conventional bell nozzle. Various truncations were applied to the nozzle and each was subjected to two conditions, an over-expansion and near optimum condition. The nozzle contour was developed using the simple approximation method and was chosen to replicate that of the XRS-2200. This anchored the data, thereby validating the computational fluid dynamics (CFD) simulation. Simulations were completed for at …

Celebrating 90-Orbits Around The Sun, Stafford Air & Space Museum

Programs

In celebration of the 90th birthday of Oklahoma astronaut and aerospace legend, Gen. Thomas P. Stafford, the Stafford Air & Space Museum in Weatherford, Oklahoma is offering free admission on September 17th, 2020.

Unless stated otherwise within this repository collection, all materials are shared under the following Creative Commons license: [Creative Commons Attribution-NonCommercial 4.0 International License].

Development Of Universal Solver For High Enthalpy Flows Through Ablative Materials, Umran Duzel

Theses and Dissertations--Mechanical and Aerospace Engineering

Atmospheric entry occurs at very high speeds which produces high temperature around the vehicle. Entry vehicles are thus equipped with Thermal Protection Systems which are usually made of ablative materials. This dissertation presents a new solver that models the atmospheric entry environment and the thermal protection systems. In this approach, both the external flow and the porous heat shield are solved using the same computational domain. The new solver uses the Volume Averaged Navier-Stokes Equations adapted for hypersonic non-equilibrium flow, and is thus valid for both domains. The code is verified using analytical problems, set of benchmarks and also a …

An Afternoon With General Thomas P. Stafford, Stafford Air & Space Museum

Programs

An Afternoon with General Thomas P. Stafford

Sunday, May 19th, 2019 at 2:00 P.M. at the Weatherford High School Performing Arts Center.

Unless stated otherwise within this repository collection, all materials are shared under the following Creative Commons license: [Creative Commons Attribution-NonCommercial 4.0 International License].

Apollo 10, 50th Anniversary Gala, Stafford Air & Space Museum

Programs

The Apollo 10 50th Anniversary Gala was held on May 18th, 2019 at the Stafford Air & Space Museum in Weatherford, Oklahoma.

Unless stated otherwise within this repository collection, all materials are shared under the following Creative Commons license: [Creative Commons Attribution-NonCommercial 4.0 International License].

Effect Of Chemical Reactions On The Fluidic Thrust Vectoring Of An Axisymmetric Nozzle, Rachid Chouicha, Mohamed Sellam, Said Bergheul

International Journal of Aviation, Aeronautics, and Aerospace

Abstract:

During the last years, several thrust control systems of aerospace rocket engines have been developed. The fluidic thrust vectoring is one of them; it is simple in design and offers a substantial gain in weight and in performance. Most of studies related to this device were carried out with cold gas. It’s quite legitimate to expect that the thermophysical properties of the gases may affect considerably the flow behavior. Besides, the effects of reacting gases at high temperatures, under their effects all flow parameters like to vary.

This study aims to develop a new methodology that allows studying and …

Aerothermodynamic Analysis Of A Mars Sample Return Earth-Entry Vehicle, Daniel A. Boyd

Mechanical & Aerospace Engineering Theses & Dissertations

Because of the severe quarantine constraints that must be imposed on any returned extraterrestrial samples, the Mars sample return Earth-entry vehicle must remain intact through sample recovery. Vehicles returning on a Mars-Earth trajectory will attain velocities exceeding any that have been experienced by prior space exploration missions, with velocities approaching 14 km/s. Velocities as high as these will encounter significant heating during atmospheric re-entry to Earth.

The purpose of this study has been to systematically investigate the aerothermodynamic challenges that will result from a Mars sample return, Earth-entry vehicle design. The goal was to enable efficient estimation of maximum stagnation …

Experimental Investigation Of A New Spiral Wingtip, Naseeb Ahmed Siddiqui, Mohammed Aldheeb, Waqar Asrar, Erwin Sulaeman

International Journal of Aviation, Aeronautics, and Aerospace

Experiments on the relative merits and demerits of slotted wingtips mimicking a bird’s primary feathers have been performed. The real emargination length of feather tips, their flexibility and curved shapes during cruise are considered in the present study. The experiments were performed at a Reynolds number of 3.7 x 10⁵ on a symmetric flat plate half wing of aspect ratio 3. Lift, drag and pitching moments were measured using a six component aerodynamic balance. Four different shapes inspired by bird primary feathers have been analysed. The rigid curved tip performed the best increasing the L/D ratio by 20%. This …

Verification And Validation Studies For The Kats Aerothermodynamics And Material Response Solver, Olivia Schroeder

Theses and Dissertations--Mechanical and Aerospace Engineering

Modeling the atmospheric entry of spacecraft is challenging because of the large number of physical phenomena that occur during the process. In order to study thermal protection systems, engineers rely on high fidelity solvers to provide accurate predictions of both the thermochemical environment surrounding the heat shield, and its material response. Therefore, it is necessary to guarantee that the numerical models are correctly implemented and thoroughly validated. In recent years, a high-fidelity modeling tool has been developed at the University of Kentucky for the purpose of studying atmospheric entry. The objective of this work is to verify and validate this …

Design Of Shape-Conforming Nosecone For Optimal Fluid Flow From Transonic To Supersonic Range, Anna Tombazzi

Williams Honors College, Honors Research Projects

Modern flight vehicles, such as rockets, missiles, and airplanes, experience a force caused by forebody wave drag during the flight. This drag force is induced when the frontal point of each vehicle breaks the pressure wave during flight. Efforts to reduce this wave drag force to improve flight efficiency include modifying the nosecone profile of the flight vehicles to lower the drag force.

This project revolved around creating a design to make the transformation of nosecone shapes from a ¾ Parabolic profile to a ½ Power Series profile possible, mid-flight. Using a novel nosecone assembly, shape memory alloys (SMAs) and …

Literature Review: Biomimetic And Conventional Aircraft Wing Tips, Naseeb Ahmed Siddiqui, Waqar Asrar, Erwin Sulaeman

International Journal of Aviation, Aeronautics, and Aerospace

This paper is an attempt to summarize the effect of wing tip devices employed by birds, as well as aeronautical engineers in the past to improve the performance characteristics of aircraft. The focus is on reduction of the induced drag or drag due to lift also known as inviscid drag. This paper will provide an insight on both biomimetic and conventional wing tip approaches to reduce the induced drag. Prior analysis and experiments on the aerodynamics of airplane performance due to both these separate studies have been discussed. The needs of the industry and their past inventions have been described …