Engineering Commons^™

Thermal Heterogeneity And Lithium Plating During Fast Charging Of Lithium-Ion Battery., Ayodeji Avis Adeniran

Electronic Theses and Dissertations

Presently, widespread adoption of electric vehicles (EVs) is hindered by challenges associated with XFC, including heat generation, lithium plating, and accelerated battery degradation. This dissertation addresses these barriers through two coordinated themes—lithium plating and thermal management—spanning four manuscripts that integrate operando diagnostics, physics-based simulation, and module-level design optimization. The first theme seeks a fundamental investigation into the dynamic interplay between temperature heterogeneity and lithium plating during fast charging, a phenomenon that poses significant limitations on the performance of graphite-based anodes. Firstly, a custom operando cell with a sapphire window was designed to enable synchronized MWIR thermography and optical imaging of …

Alkali-Silica Reactivity And Ionic Transport In Mortar With Hydrophobic Inclusions., Isaac Offei

Electronic Theses and Dissertations

Alkali-silica reaction (ASR) causes extensive damage to concrete infrastructure worldwide, with traditional mitigation strategies increasingly constrained by supplementary cementitious material (SCM) supply limitations. This dissertation investigates an innovative approach to ASR prevention through strategic application of hydrophobic materials to modify moisture and ionic transport pathways in cement mortars. The research employed a comprehensive three-objective experimental program using highly reactive aggregates and three hydrophobic materials: hexamethyldisilazane (HMDS)-treated fumed silica, silane-based emulsion, and silane-based crème. The first objective demonstrated the feasibility of hydrophobic aggregate surface modification, achieving 46% and 38% reductions in ASR expansion for washed and non-washed hydrophobic aggregates, respectively. Microstructural …

Detecting Non-Axisymmetric Instabilities In Fluid-Based Manufacturing Via Multi-View Tensor Analysis., Bidusi Khadka

Electronic Theses and Dissertations

Fluid-based manufacturing processes, such as inkjet printing and electrospinning, fabricate micro- and nano-scale structures with high precision, but are prone to complex fluid dynamics exhibiting axisymmetric and non-axisymmetric instabilities. Conventional monitoring often relies on single-camera inputs and symmetry assumptions, limiting the detection of three-dimensional anomalies like jet deflection. This study presents a novel multi-view streaming video-based anomaly detection framework to address this gap. The framework employs a modified Tensor Sequential Sampling (TSS) algorithm with edge-based sampling to capture geometric spatiotemporal features of each camera view using the videos obtained from an orthogonally positioned dual-camera setup. These features are fused with …

Isolated Dc-Dc Converter For An Ev Microgrid, Oscar Yu, William Leiker

Electrical Engineering

This product is a redesign of a DC-DC buck-boost converter which utilizes a new topology, the flyback converter, for use in an electric vehicle (EV) as a microgrid. The main driver behind the redesign is to provide electrical isolation between elements in the microgrid. The EV microgrid consists of the battery, motor, external DC and AC ports, and the power electronics (DC-DC converter and AC-DC inverter) which were designed and built in previous senior projects. Using EV’s as microgrids can help relieve stress from the main power grid caused by charging electric vehicles. Implementing EV’s as a microgrid enables the …

Data-Driven Evaluation Of Sustainable Waste-To-Energy Pathways For Intelligent Urban Systems, Izech Brian O. Edwin, King Harold A. Recto

Electronics, Computer, and Communications Engineering Faculty Publications

The handling of municipal solid waste (MSW) in swiftly urbanizing Philippine cities poses intricate energy and governance challenges. In Baguio City, reliance on landfills has reached critical levels due to diminishing capacity, rising transport costs, and opposition to trash transfers by nearby LGUs. Although shaped by unique topographical and governance constraints, Baguio’s situation reflects issues faced by other rapidly growing Philippine cities; therefore, analyzing it offers insights for national MSW decision-making. This study applies a triple bottom line (TBL) framework to assess three management scenarios: (1) Status Quo, where all MSW is landfilled with no energy recovery; (2) Landfill with …

Engineering Risk And Indigenous Resilience Toward Intelligent Decision Support For Mining In Ancestral Lands, Izech Brian O. Edwin, King Harold A. Recto

Electronics, Computer, and Communications Engineering Faculty Publications

Mining within ancestral territories reveals an ongoing conflict between technical viability and Indigenous consent. This collaborative study, conducted by an engineering scholar and a policy researcher of Indigenous heritage in Benguet among the Ibaloi and Kankanaey peoples, investigates how risk transparency and policy alignment can bridge existing divides, while formulating principles applicable to other Indigenous mining contexts. The study provides an initial evaluation of the feasibility of a proposed large-scale mining operation within a risk-informed, data-driven governance framework. Three elements of engineering risk were assessed utilizing literature-derived and proxy parameters: (1) Land degradation is indicated by a Soil Productivity Index …

Multi-Cater Pack Heat Sealer, Ivan Medina-Zepeda, Laurent Hirakata, Donovan Furtado, Cody Ngan

Mechanical Engineering

The Multi-Cater Pack Heat Sealer was developed to support Achievement House, a non-profit organization that employs adults with intellectual and physical disabilities and is facing increasing demand for sealed cater packs. Existing single-pack sealers limited both throughput and accessibility, which led to the creation of a 3D printed attachment for a 40-inch impulse heat sealer. The attachment allows nine packs to be sealed at the same time and includes a tray-style trapdoor that allows for quick unloading. The need for accessibility and usability guided the design throughout the process. Alignment guides improve placement consistency, and the ergonomic layout accommodates both …

Water Bottle Lid Co Detector, Zeke Bukovansky, Jake Siegel, Jack Wisegarver, Cody Rudman

Mechanical Engineering

This project introduces a portable carbon monoxide detector integrated into a water bottle lid to give users a simple way to stay aware of CO exposure in daily life. The design packages an electrochemical sensor, onboard electronics, and clear visual and audible alerts into a compact form that fits standard bottles. By embedding sensing into an object people already carry, the device offers a practical path toward reducing unrecognized CO risks and improving personal safety.

Porous Triboelectric Nanogenerator For Load Sensing Of Total Knee Replacement, Elham Mahmoudi, Adam Garry Redgrift, Emre Salman, Milutin Stanacevic, Ryan Willing, Shahrzad Towfighian

Mechanical Engineering Faculty Scholarship

This study addresses the critical need for self-powered, durable pressure sensors in Total Knee Replacement (TKR) implants to enable the collection of post-operative information. The scope of this research encompasses the design, development, and testing of a triboelectric nanogenerator (TENG) integrated into an instrumented knee implant for energy harvesting and pressure sensing. The authors’ unique approach involves utilizing a porous silicone rubber as a dielectric material. This allows the TENG to withstand forces up to 2000 N and generate a maximum power output of 18 μW. Theoretical modeling combined with experimental validation provides deeper insight into the fundamental operating principles. …

Bridging Cybersecurity Practice And Law: A Hands-On, Scenario-Based Curriculum Using The Nice Framework To Foster Skill Development, Colman Mcguan, Aadithyan Vijaya Raghavan, Komala M. Mandapati, Chansu Yu, Brian Ray, Debbie Jackson, Sathish Kumar

Electrical and Computer Engineering Faculty Publications

In an increasingly interconnected world, cybersecurity professionals play a pivotal role in safeguarding organizations from cyber threats. To secure their cyberspace, organizations are forced to adopt a cybersecurity framework such as the NIST National Initiative for Cybersecurity Education Workforce Framework for Cybersecurity (NICE Framework). Although these frameworks are a good starting point for businesses and offer critical information to identify, prevent, and respond to cyber incidents, they can be difficult to navigate and implement, particularly for small-medium businesses (SMBs). To help overcome this issue, this paper identifies the most frequent attack vectors to SMBs (Objective 1) and proposes a practical …

Origami-Inspired Pneumatic Soft Robotic Gripper, Conor J. Schott

Master's Theses

This thesis presents the design and evaluation of a vacuum-actuated, origami-based soft robotic gripper. A custom Sea Urchin crease pattern forms a lightweight folding skeleton that collapses radially under vacuum. The system emphasizes low cost and accessibility through laser cutting, 3D printing, and silicone molding. The Sea Urchin geometry was selected after digital and physical screening of candidate crease patterns for smooth folding, low strain concentration, and uniform inward motion. The folding skeleton is laser cut from 4 mil drafting film and folded into a compliant core. Four membrane configurations were developed: an origami gripper with a 36-inch balloon (Design …

Multi-Modal Data-Efficient Learning For 3d Machine Vision, Zhimin Chen

All Dissertations

The rapid progress of 3D computer vision has enabled a wide range of applications in autonomous driving, robotics, and augmented reality. Despite this growth, training robust 3D perception models remains challenging due to limited labeled data, the complexity of integrating multiple modalities, and the inherently imbalanced and long-tailed nature of 3D datasets. This dissertation addresses these challenges by proposing data-efficient, multi-modal learning frameworks that improve the accuracy, generalization, and scalability of 3D scene understanding.

In the semi-supervised setting, this work presents novel approaches that combine limited annotations with large amounts of unlabeled data to enhance 3D object classification and retrieval. …

Synthesis And Characterization Of Chemically Recyclable Polypropylene-Based Covalent Adaptable Networks, Andrii Tiiara

All Dissertations

Polyolefins (POs) are inexpensive engineering materials with excellent physical and mechanical properties, accounting for nearly 60% of all thermoplastics. However, large-scale recycling remains limited, with only ~15% undergoing mechanical recovery. This dissertation addresses this challenge by fragmenting and functionalizing polypropylene (PP) chains to generate macromonomers and employing them, along with industrial reactive PP macromonomers, to synthesize, depolymerize, and repolymerize chemically recyclable polypropylene-based polyolefins (CR-POs). These CR-POs incorporate ester linkages that form covalent adaptable networks (CANs), maintaining a gel fraction of ~70% while remaining melt-reprocessable via extrusion and compression molding.

First, the fragmentation of PP is investigated by microwave irradiation. Microwave …

Purifying Circular Rna Therapeutics, Karen Guillen-Cuevas

All Dissertations

Circular RNA (circRNA) has emerged as a promising therapeutic modality due to its enhanced stability and resistance to exonuclease degradation compared with linear mRNA. However, its stability and functionality depend strongly on achieving high purity, and current methods such as size-exclusion chromatography suffer from peak overlap, low yields, and poor scalability. This dissertation addresses these limitations by developing ultrafiltration-based strategies to purify circRNA directly from in vitro transcription (IVT) and self-splicing (circularization) reactions. First, the feasibility of ultrafiltration was demonstrated using polyethersulfone membranes, where sieving coefficients and critical flux values of circRNA, precursor RNA, and nicked RNA were measured to …

End-To-End Direct Current For Standalone Power Network, Eyad Ahmad Aldarsi

All Dissertations

The primary issue that faces the humanity is climate change and because of that greenhouse gases (GHGs) emissions are rising. The consequences of this issue have emphasized the necessity for replacing the dominant method of electricity generation, which mostly utilizes fossil fuels, to be centered on access to all, green, low-cost, and renewable sources of energy. Currently, photovoltaics (PV) and wind turbines are the two technologies so far that can convert the source of renewable energy, which is produced by sun irradiance and wind respectively, into large-scale electric power that can be distributed into the electricity grid. The work in …

Robust Data-Driven Predictive Control Of Nonlinear Systems Under Modeling Uncertainty, Pegah Ghafghanbari

All Dissertations

Data-driven predictive control enables designing controllers directly from data, making it attractive for complex systems with hard-to-model dynamics. However, practical deployment is challenged by modeling inaccuracies and changing operating conditions. This dissertation develops predictive control frameworks that incorporate robustness and adaptability to address these issues in uncertain nonlinear systems.

The first part employs the Linear Parameter-Varying (LPV) framework, which represents nonlinear dynamics through simple linear form representation. To characterize the plant-model-mismatch often caused by limited data and numerical calculations, Bayesian Neural Networks (BNNs) are used, and their uncertainty estimates are integrated into two robust control approaches. The first is a …

Surface Reaction And Transportation Of Radium-226 In Marine Systems, Jiusi Wang

All Dissertations

Historical uses of radium (Ra)-containing self-luminous paint, such as on gauges and dials in naval ships, have led to the potential for such paint, and thus Ra, to be released into the marine environment. Radium-226 (²²⁶Ra) behavior in marine systems is not fully described in the literature, presenting a knowledge gap in the process of evaluating potential ecological impact of Ra in marine systems. This study explores various mechanisms contributing to Ra environmental transport in marine systems on a laboratory scale, including leaching, sorption, and diffusion. ²²⁶Ra leaching from watch hand dials containing radioactive luminous paint is …

Advancing Life Cycle Assessment Of Mass Timber: Environmental Performance, Circular Design And End-Of-Life Strategies, Muzan Williams Ijeoma

All Dissertations

Mass timber has emerged as a leading candidate for low-carbon construction, offering the dual benefits of reduced embodied emissions and biogenic carbon storage. Yet, fully realizing its sustainability potential requires a comprehensive and context-specific understanding of its environmental performance across the entire life cycle, from raw material production to building operation and beyond end-of-life (EoL). This dissertation advances life cycle assessment (LCA) practices for mass timber by addressing critical challenges across multiple phases of its life cycle. This dissertation is comprised of three published papers, and two submitted manuscripts. First, I conducted a critical review and meta-analysis of mass …

Reverse (Bio)Engineering: A Machine Learning Approach To Optimize Baseball Pitcher Health And Performance, Robert C. Moore

All Dissertations

Ball tracking systems are becoming ubiquitous in sport, creating an unprecedented opportunity for big data applications to optimize human health and performance. These applications are especially common in baseball, a sport known for analyzing ball flight data to quantify performance. Analysts routinely use ball flight data to identify the attributes of top performing pitchers, finding that the best pitchers throw with optimal combinations of release speed and spin to precise locations. However, for certain pitchers, the throwing motion required to produce optimal ball flight places exceedingly high biomechanical load on the elbow, and consequently injury rates continue to rise. This …

Hybrid Learning For Rough Terrain Navigation Of Actively Articulated Wheeled Vehicles, Dhruv Mehta

All Dissertations

Conventional wheeled ground vehicles have been used for rough terrain navigation in the recent years. They consist of a chassis connected to wheels through passive, semi-active, or active suspension systems. However, their fixed configurations limit mobility and maneuverability, constraining their ability to autonomously navigate diverse and rough terrains. Autonomous Ground Vehicles (AGVs) face significant challenges in this regard, including varying terrain roughness, soil hardness, and obstacle crossing.

To address these limitations, Actively Articulated Wheeled Vehicle (AAWV) architectures have recently emerged, offering real-time geometric adaptability. AAWVs have chassis and wheels connected via articulated serial or parallel linkages. However, increased articulation introduces …

Data-Driven Discovery Of Finite-Dimensional Koopman Operator For Modeling And Control Of Uncrewed Ground Vehicles, Ajinkya Joglekar

All Dissertations

This dissertation advances data-driven modeling and adaptive control techniques for Uncrewed Ground Vehicles (UGVs), with a focus on autonomy in mission-critical and safety sensitive environments. UGVs are deployed across a wide spectrum of domains, from structured manufacturing shop floors to unstructured off-road terrains, including planetary exploration, precision agriculture, and disaster response. These platforms, operating in dull, dirty, and dangerous conditions, demand autonomy that is both adaptable and robust. While traditional model-based control methods offer interpretability and robustness, they struggle with unmodeled dynamics, parameter variations, and integration of high-dimensional sensing. Conversely, modern machine learning approaches can directly exploit sensory data but …

Hydrodynamics Of Perforated Heave Plates, Muhammad Usman

All Dissertations

Ocean waves are a clean and renewable energy source that can help reduce dependence on fossil fuels and combat climate change. To capture this energy, researchers have developed devices known as wave energy converters (WECs). One common type, called a two-body point absorber WEC, uses a buoy floating on the ocean surface connected to a submerged reaction plate, known as the heave plate, which lies underwater. The relative up-and-down motion between the buoy and the heave plate, driven by ocean waves, generates usable power via a power take-off (PTO) system. Traditionally, these submerged heave plates are solid structures. However, this …

Opposed-Piston Two Stroke Engine As A High Power Density Solution In Heavy Duty Applications: An Experimental Evaluation With Diesel And Ethanol, Ankur Bhatt

All Dissertations

With an increasing demand to reduce greenhouse gas (GHG) emissions, the conventional powertrain technology is at a saturation point. There is reinvigorated research interest in alternative powertrain designs that offer potentially higher efficiencies and lower engine-out emissions compared to conventional powertrains. The opposed piston two-stroke (OP2S) engine is one such alternative engine architecture that has demonstrated a reduction in engine-out emissions and increased efficiency compared to conventional four-stroke diesel engines. Like any two-stroke engine, the scavenging process and the composition of the internal residuals are predominantly governed by the pressure differential between the intake and the exhaust ports. Without dedicated …

Unraveling Nucleation Mechanisms In Membrane Distillation: A Molecular Dynamics And Enhanced Sampling Approach, Nazanin Abbasi

Graduate Theses and Dissertations

Membrane distillation offers a promising route for desalination but remains limited by salt scaling, where mineral crystals nucleate and grow in concentrated brines. To inform strategies that mitigate scaling, this thesis investigates homogeneous nucleation in supersaturated aqueous NaCl solutions using molecular dynamics and enhanced sampling techniques. Several collective variables (CVs) are tested to capture the early stages of ion aggregation and crystal formation, including ion–ion coordination number, dehydration, and bond orientational order parameters Q₄ and Q₆. Enhanced sampling techniques, such as metadynamics and umbrella sampling, are employed to overcome the high free energy barriers associated with the formation of critical …

Extending Touch: Investigating Sensorimotor Integration, Cognitive Workload, And Presence With Neuro-Haptic Feedback In Virtual Reality, Aliyah Khadijah Shell

Graduate Theses and Dissertations

Sensory feedback from the hand is fundamental for the coordination of fine motor skills and overall sensorimotor function. Impaired somatosensation during task execution has been associated with the development of inaccurate motor plans, which can hinder motor learning. Virtual Reality (VR) has emerged as a promising tool for motor rehabilitation; however, most VR-based interventions overlook the critical role of tactile feedback in motor control. The absence of touch feedback, which is integral to conventional rehabilitation and training, may limit the full therapeutic potential of VR. Integrating functionally relevant neurostimulation based haptic feedback (neuro-haptic feedback) into VR-based interventions may enhance functional …

Design And Testing Of A Gallium Nitride Power Amplifier For High-Temperature Radar Applications, Walker Landry Harbison

Graduate Theses and Dissertations

This thesis offers the design, fabrication, and evaluation of a gallium nitride (GaN) power amplifier integrated circuit (IC) intended for high-temperature radar applications. Radar systems are used in many different applications, such as defense, aerospace, and weather. For their function, these systems require high power, efficiency, and reliability under a wide range of operating conditions. Taking advantage of the material properties of GaN, including its high breakdown voltage, wide bandgap, and thermal conductivity bolstered by the use of silicon carbide in the substrate, this work focuses on examining amplifier performance in both ambient and elevated temperature conditions. The PA was …

Developing Standardized Testing Datasets For Benchmarking Automated Quality Control Algorithm Performance With Aquatic Sensor Data, Ehsan Kahrizi

All Graduate Theses and Dissertations, Fall 2023 to Present

Advances in water monitoring technologies have led to a large increase in the amount of data collected from rivers, lakes, and other water systems. However, ensuring that these data are accurate and reliable remains a major challenge. Traditional data quality checks are done manually by a technician, which can be slow, inconsistent, and not practical for real-time monitoring. This research addresses these challenges by developing standardized datasets for testing computer-based methods that automatically detect and correct errors in water data. Using information from the Logan River Observatory in northern Utah, we created a step-by-step process to identify, categorize, and label …

Strategic Enhancement Of Biofuel Production Using Bacillus Subtilis As A Model Organism: A Dual Approach Of Gene Essentiality Mapping And Optimization, Angela A. Zebede

Electronic Theses and Dissertations

With rising global demand for renewable energy, enhancing microbial platforms for biofuel production is vital. This study engineered Bacillus subtilis to improve resilience to solvent stress by targeting membrane lipid biosynthesis pathways essential for integrity. Growth curve analysis (OD₆₀₀) showed that phosphatidylserine (PS) and phosphatidylethanolamine (PE) knockout strains grew significantly slower than wild type (168), indicating the importance of these lipids under stress. Laurdan fluorescence spectroscopy was used to assess membrane properties. Generalized polarization (GP) analysis revealed a concentration-dependent reduction in membrane order upon 1%–2% 1-butanol exposure. GP values declined progressively from control to 2% treatment, reflecting increased membrane fluidity …

Towards Trustworthy Federated Learning, Alina Basharat

Theses and Dissertations

Federated learning is a collaborative training model in which multiple clients optimize aglobal model by transmitting updates to a coordinating server while keeping raw data on-device, thereby reducing direct data exposure and enabling iterative global improvement. However, the iterative communication process is vulnerable to malicious attackers that either deliberately destroy the model or curious to infer raw data. Moreover, learning from multiple agents may result in unfair results. To enhance trustworthiness within this setting, we employ two-sided norm-based screening (TNBS) that removes both abnormally large and abnormally small updates, pair it with a q-fair objective to emphasize high-loss (disadvantaged) clients, …

When Textures Trim Drag: Micro-Structures For Adaptive Drag Reduction And Flow Authority, Miguel Angel Olvera

Theses and Dissertations

Turbulent boundary layers are a major source of drag and performance loss. This thesis investigates Triangular Porous Texturing (TPT), apex-forward microstructures with optional bleed channels, as a passive concept for simultaneously reducing skin friction and strengthening boundary layer momentum near separation. Low-speed wind tunnel tests are conducted over tripped turbulent boundary layers on flat plates with three surfaces: a smooth baseline, a solid-crest TPT array isolating the knife-edge “slip-cut” effect, and a porous-bleed TPT array whose paired micro-channels vent a small fraction of the free stream. Time-resolved PIV provides wall-normal velocity fields; skin friction is inferred from near-wall shear, and …