Engineering Commons^™

Understanding The Effects Of Wind Intensity, Forward Speed, And Wave On The Propagation Of Hurricane Harvey Surges, Madinah Shamsu, Muhammad Akbar

Mechanical and Manufacturing Engineering Faculty Research

Hurricane storm surges are influenced by wind intensity, forward speed, width and slope of the ocean bottom, central pressure, angle of approach, shape of coastal lines, local features, and storm size. A numerical experiment is conducted using the Advanced Circulation + Simulation and Simulating Waves Nearshore (ADCIRC + SWAN) coupled model for understanding the effects of wind intensity, forward speed, and wave on the storm surges caused by Hurricane Harvey. The ADCIRC + SWAN is used to simulate hurricane storm surges and waves. The wind fields of Hurricane Harvey were reconstructed from observed data, aided by a variety of methodologies …

Exploration Of Efficient Dewatering Methods In Stimulus-Responsive Hydrogels And Their Potential For Desalination, Weiliang Sun

LSU Doctoral Dissertations

Addressing global freshwater scarcity is a pressing challenge, and desalination has emerged as a viable solution to generate high-quality water without compromising natural freshwater ecosystems. In comparison to conventional desalination methods such as thermal distillation and membrane-based processes, hydrogels offer distinct advantages including strong water absorption, water retention, well-defined pore structures, customizable functional groups, and responsive properties to external stimuli. These unique characteristics position hydrogels as promising candidates for water treatment applications. Hydrogel-based desalination involves the utilization of hydrogels to absorb water from saltwater, and then discharge low-concentration solutions to obtain reclaimed water. The fundamental principle underlying the desalination ability …

Controls On The Stratiform Copper Mineralization In The Western Syncline, Upper Peninsula, Michigan, William C. Williams, Theodore J. Bornhorst

Michigan Tech Publications

The Western Syncline hosts reduced-facies, or Kupferschiefer-type, sedimentary rock-hosted stratiform Cu deposits (SSC) in the lowermost meters of the Nonesuch Formation, which is part of a thick section of clastic sedimentary rocks that comprise the upper fill of the Mesoproterozoic Midcontinent Rift of North America. Located in the Porcupine Mountains Cu district in Upper Peninsula, Michigan, these blind deposits were discovered in 1956, but are not yet developed, although recent renewed interest may result in near-term production. The deposits are distinguished by their relatively undeformed nature and lack of superposed hydrothermal events. Prior to lithification, chalcocite mineralization replaced diagenetic pyrite …

Optimizing The Membrane-Assisted Recovery Of Solids (Mars) Technology For Nutrient Removal And Recovery From Concentrated Waste Streams, Ben Yamin Hoque

USF Tampa Graduate Theses and Dissertations

The effective management of nutrients, such as nitrogen and phosphorus, in decentralizedwastewater treatment environments is a pressing challenge. These nutrients pose significant risks to the environment and public health when discharged into water bodies, while their recovery and reuse can help alleviate nutrient shortages in various industries, including agriculture. Conventional biological treatment methods used in centralized facilities are not suitable for decentralized systems due to operational complexities and space limitations. Chemical treatment mechanisms, such as adsorption, ion exchange, precipitation, and air-stripping, offer potential solutions but are accompanied by challenges like high costs and logistical issues. Therefore, finding a sustainable and …

Situational Analysis Of Gold Processing Practices At Artisanal And Small-Scale Gold Mining In Tanzania, Sospeter Maganga

Tanzania Journal of Engineering and Technology (TJET)

This study reports the state-of-art situation of gold processing practices at artisanal and small-scale gold mining (ASGM) in Tanzania. It involved literature review, document review of public domain reports, and field survey during data collection. This was followed by screening of literature, reports, and field data relevant to the study topic. Further, the strengths, weaknesses, opportunities, and challenges (SWOC) analysis of ASGM was conducted and discussed. The study indicates that ASGM subsector in Tanzania continues growing with people involved directly in ASGM ranging between 1 to 1.5 million. Further, the study indicates that ASGM in Tanzania contributes about 90% of …

Improved Burned Area Mapping Using Monotemporal Landsat-9 Imagery And Convolutional Shift-Transformer, Seyd Teymoor Seydi, Mojtaba Sadegh

Civil Engineering Faculty Publications and Presentations

Satellite imagery, specifically Landsat, have been widely used for mapping and monitoring wildfire burned areas. The new Landsat-9 satellite – with higher radiometric resolution compared to its predecessors, and improved temporal resolution when combined with Landsat-8 (∼8 days) – enables a wide range of applications, particularly burned area mapping (BAM). We propose a novel deep learning BAM model that leverages the strengths of the convolutional layers for deep feature generation from Landsat-9 imagery and shift-transformer block for burned area classification. The performance of the model is evaluated in five large fire case studies across the globe. BAM results are also …

Exploring The Impact Of Students Demographic Attributes On Performance Prediction Through Binary Classification In The Kdp Model, Issah Iddrisu, Peter Appiahene, Obed Appiah, Inusah Fuseini

Knowledge Engineering and Data Science

During the course of this research, binary classification and the Knowledge Discovery Process (KDP) were used. The experimental and analytical capabilities of Rapid Miner's 9.10.010 instructional environment are supported by five different classifiers. Included in the analysis were 2334 entries, 17 characteristics, and one class variable containing the students' average score for the semester. There were twenty experiments carried out. During the studies, 10-fold cross-validation and ratio split validation, together with bootstrap sampling, were used. It was determined whether or not to use the Random Forest (RF), Rule Induction (RI), Naive Bayes (NB), Logistic Regression (LR), or Deep Learning (DL) …

Conceptual Design And Preliminary Safety Analysis Of A Proposed Nuclear Microreactor For Mobile Application, A. S. M. Fakhrul Islam

Theses and Dissertations

Conceptual design and preliminary safety analysis of a proposed helium-cooled Micro Nuclear reactor In ONe megawatt (MINION) thermal output is done through three-dimensional computational analysis. Compared with the conventional high temperature gas-cooled reactors (HTGR) that use tri-structural or bi-structural isotropic (TRISO or BISO) fuel particles, MINION uses traditional clad fuel pellets. This greatly simplifies the core design and allows for a substantially more compact design thanks to the fuel’s signif-icantly higher U-235 atom density. Uranium carbide (UC) enriched up to 19.75% in U-235 is used as fuel. In the power-flattened design, U-235 enrichment varies radially between 19.75% and 10.5% in …

Neurocomputing And Interfacing Digital Tasting System: Research, Design, And Evaluation, Amira J. Zaylaa, Ahmad El Hajj

BAU Journal - Science and Technology

The continuous evolution in computing and interfacing has been extended to develop multi-sensory experiences in many domains such as neurological, auditory, vision, and haptic domains. So far, only a few remarkable system approaches have been approved to be serving the taste sensation digitally. Although taste sensation is linked to the brain, there is a lack of optimal neurocomputing digital taste sensation systems. Our study provides a new neurocomputing method to digitally stimulate the sense of taste by electrical stimulation on the human tongue. We aim to link chemical stimulation and electrical stimulation in order to design an electronic interface for …

Methods And Surface Materials Repair For Concrete Structures – A Review, Lelian W. Elkhatib, Adel Elkordi, Jamal Khatib

BAU Journal - Science and Technology

Concrete is a very critical material that may require maintenance and possible repair periodically, especially in important structure such as bridges. In general, concrete in structures (e.g. reinforced concrete) may be subjected to cracks due to a variety of reasons. These include, design and external environments such as the ingress of harmful ions into the concrete, unexpected extra loads including earthquakes. These cracks can affect not only the appearance of the structure but more importantly the structural performance of concrete and the integrity of the concrete structure. Therefore, when cracks occur a proper repair method should be selected, based on …

Localized Surface Plasmon Resonance Of Palladium Parallelepiped Nanoparticles, Salem Marhaba, Nourhan El Kawni

BAU Journal - Science and Technology

Localized surface plasmon resonance (LSPR) of palladium parallelepiped nanoparticle have been investigated using Finite Element Method (FEM) in the frame of COMSOL Multiphysics Software. Spectral characteristics (magnitude, peak position and width) of LSPR of a single Pd nanoparticle having the shape of a parallelepiped are investigated in two different cases. The first case studied the size effect on LSPR by fixing the height with varying both length and width. However, the second case studied the shape effect on the LSPR by rounding the corners of the parallelepiped for different radii while fixing its dimensions. The extinction cross-section spectra of these …

On The Use Of Wireless Technologies For Wildlife Monitoring: Wireless Sensor Network Routing Protocols, Lilian Mutalemwa

Tanzania Journal of Engineering and Technology (TJET)

Traditional methods for wildlife monitoring are labor-intensive and time-consuming. Therefore, advanced technologies and remote monitoring methods are becoming increasingly popular. This paper presents a study on wireless technologies for wildlife monitoring. In the study, a review of the literature was done to identify the most commonly used wireless technologies. Various technologies were explored including unmanned aerial vehicles (UAVs), Internet of Things (IoT), wireless sensor networks (WSNs), artificial intelligence (AI), global positioning system (GPS), and very high frequency (VHF) radio. Then, a more detailed study was done on WSN technology. Investigations were done to observe the performance of routing protocols in …

Product Costing And Pricing In Small And Medium Enterprises In Tanzania, Cosmas F Kindole

Tanzania Journal of Engineering and Technology (TJET)

metalwork small and medium enterprises located in Dar es Salaam with the aim of establishing methods used by SMEs in Tanzania in setting selling prices of their products. The study was necessitated by the apparent discrepancy of prices for similar products from SMEs. The approach used to gather information was mainly through direct interview and the use of questionnaires. Direct observation and literature review were also used to establish the whole costing and pricing practices in metal manufacturing SMEs. The findings of the study established that product selling practices of the surveyed SMEs were based on instinct and appearance of …

A Perspective Into Development Of Pavement Design Methods For Low Volume Roads: A Review, Mwajuma Lingwanda

Tanzania Journal of Engineering and Technology (TJET)

The definition of low volume roads (LVRs) is not time static and it varies from place to place around the world. The importance of such roads for providing access, in connecting communities and link farms to markets is well appreciated worldwide. LVRs are credited as the direct source of social economic development in rural communities, growth, reduction of poverty and sustaining livelihood. Nevertheless, the LVR network is growing at an unsatisfactory rate especially in Sub-Saharan Africa. The slow rate in developing LVR network is attributed to the high cost of construction and maintenance. To the author’s perspective, research has a …

Applications Of Uavs In Mine Industry: A Scoping Review, Dang Tuyet Minh, Nguyen Ba Dung

Journal of Sustainable Mining

In recent years, a variety of technologies have improved mining operations. One of them is the Unmanned Aerial Vehicles (UAVs), the emerging technology that has been changing the mining process, boosting mining safety and productivity. The main purpose of this paper is to review the applications of UAVs in the mining industry based on the results of 113 research papers over the past twelve years, from 2010 to May 2022. The potential applications of UAVs in the mining industry are broad. Based on the paper identified, eight categories are used to classify UAV applications in the mining sector. The reviewed …

Work In Progress: Assessing Engineering Students' Behavioral Engagement And Learning; Survey Development And Validation, Ibukun Samuel Osunbunmi, Kurt Henry Becker, Young Min Kim, Mohammad Al Mestiraihi

Electrical and Computer Engineering Faculty Publications

Studies have shown that the more involved students are with their learning, the better their achieved desired educational outcome. However, little is known about the extent to which the existing engineering curriculum and pedagogical strategy implemented elicit engineering students’ engagement in the Middle East and North Africa region (MENA) of the world. The goal of this study is to examine to what extent the existing engineering curriculum elicits student engagement in self-learning and collaborative learning. This effort is part of the ongoing re-evaluation and redesign of the water engineering curriculum of one of the countries in the MENA region by …

Evaluating The Post-Mining Land Uses Of Former Mine Sites For Sustainable Purposes In South Africa, Sphiwe E Mhlongo

Journal of Sustainable Mining

This paper uses a case study of an abandoned magnesite mine in the Limpopo Province of South Africa to find ways of identifying post-mining land used from the current uses of the abandoned mine sites or features. The approach used involved carrying out a field characterization of the mine site and documentation of the current uses of the features of the abandoned mine site. The technique used to identify the internal and external factors of the land uses involved analyzing their Strength, Weakness, Opportunities, and Threats. The Analytic Hierarchy Process (AHP) technique was used for further ranking of the land …

A Novel Approach Using Integrated Greywater Treatment System Applying Net Zero Wastewater Concept For Sustainable Urban Communities, Mianda Khattab

Theses and Dissertations

We are blessed with endless resources that are naturally existing in our world and we fully rely-on without envisioning the bigger picture of what would happen if these resources came to an end, or how can we even ensure sustainable lives by regenerating or reusing or utilizing the naturally existing resources? The surrounding ecosystem, the land we live on, the air we breathe, the water we drink and use for cooking, laundry, shower, irrigation, and many other usages are examples of the resources that we, as global users, are taking for granted.

It is a common knowledge that we are …

Prediction Of Terephthalic Acid Yield In Aqueous Hydrolysis Of Polyethylene Terephthalate, Hossein Abedsoltan, Zeinab Zoghi, Amir H. Mohammadi

Chemical and Biochemical Engineering Faculty Research & Creative Works

Aqueous hydrolysis is used to chemically recycle polyethylene terephthalate (PET) due to production of high-quality terephthalic acid (TPA), the PET monomer. PET hydrolysis depends on various factors including PET size, catalyst concentration, and reaction temperature. So, modeling PET hydrolysis by considering the effective factors can provide useful information for material researchers to specify how to design and run these reactions. It will save time, energy, and materials by optimizing the hydrolysis conditions. Machine learning algorithms enable to design models to predict the output results. For the first time, 381 experimental data were gathered to model aqueous hydrolysis of PET. Effective …

Antimicrobial Efficacy And Hplc Analysis Of Polyphenolic Compounds In A Whole-Plant Extract Of Eryngium Campestre, Abdulaziz A. Al-Askar, Shimaa Bashir, Abdallah E. Mohamed, Omaima A. Sharaf, Rokaia Nabil, Yiming Su, Ahmed Abdelkhalek, Said I. Behiry

Civil and Environmental Engineering Faculty Publications

Due to the constant increase in the number of plant diseases and the lack of available treatments, there has been a growing interest in plant extracts over the past few decades. Numerous studies suggest that plant extract molecules possess valuable antimicrobial activities, particularly against fungi and bacteria. This suggests that these biomaterials could potentially serve as attractive therapeutic options for the treatment of phytopathogen infections. In the present study, we investigated and analyzed the methanolic extract of Eryngium campestre L. whole plant extract using HPLC. The analysis revealed the presence of several polyphenolic constituents, with benzoic acid, catechol, quercetin, vanillic …

Obujulizi Share - Enabling Voices For Rural Ugandan Communities, Aastha Khare, Sravani Polkampalli

Computer Science and Engineering Senior Theses

Rural communities in Uganda currently lack proper technical infrastructure to effectively communicate their issues and find support within their communities. For our project, we collaborated with Rose Academies, a nonprofit organization that aims to empower and aid impoverished communities in Sub-Saharan Africa. We intend to help them by creating a centralized, secure, and accessible system that allows members of the communities they serve to share their experiences. Our project consisted of three parts: an interview application, where Rose Academies’ creative team can take and record interviews, a content managing application to allow the creative team to select compelling interviews and …

Insect Classification And Explainability From Image Data Via Deep Learning Techniques, Tanvir Hossain Bhuiyan

USF Tampa Graduate Theses and Dissertations

Since the dawn of the Industrial Revolution, humanity has always tried to make labor more efficient and automated, and this trend is only continuing in the modern digital age. With the advent of artificial intelligence (AI) techniques in the latter part of the 20th century, the speed and scale with which AI has been leveraged to automate tasks defy human imagination. Many people deeply entrenched in the technology field are genuinely intrigued and concerned about how AI may change many of the ways in which humans have been living for millennia. Only time will provide the answers. This dissertation is …

Neutrosophic Framework For Assessment Challenges In Smart Sustainable Cities Based On Iot To Better Manage Energy Resources And Decrease The Urban Environment's Ecological Impact, Samah Ibrahim Abdel Aal

Neutrosophic Systems with Applications

Sustainable smart cities based on the Internet of Things (IoT) technology provide promising prospects for improving quality of life. However, in order to facilitate the widespread implementation of IoT-based smart city solutions, there is a need to concern about data privacy and security, standardization, interoperability, scalability, and sustainability. Reducing the environmental effect of urban activities, optimizing the management of energy resources, and designing novel services and solutions for inhabitants are all examples of how the smart city concept is inextricably linked to sustainability. There is a need to assess challenges in smart sustainable cities based on IoT. This paper is …

Tank Level Controller Plc Lab, Siddhi Upadhyaya, Teghvir Grewal

Electrical Engineering

The California Polytechnic State University San Luis Obispo’s Electrical Engineering Department is currently developing lab experiments for the new EE435 (Industrial Power Control and Automation) class. In order to support these efforts, fourth year Cal Poly students are expected to develop laboratory experiments that will be conducted during this new class for the semester system. The lab experiment focused on in this project is called the Tank Level Controller. This experiment will introduce EE 435 students to Schneider Electric Programmable Logic Controller (PLC) hardware and software, which is prominent in the automation industry.
This experiment will require students to develop …

Lighting Industry-University Collaboration: Enabling Collaborator-Based Evaluation Of Performance, Amardeep M. Dugar

Manipal Journal of Science and Technology

This paper explores a theoretical framework, the antecedent factors that shape it, and a practical interactive study for formalizing industry-university collaborations in the field of lighting. The framework uses an identity paradigm – an educational identity for the lighting industry and an entrepreneurial identity for universities. It further argues that such an identity exchange provides better avenues to address the performance of industry-university collaborations. These collaborations are viewed as learning interactions and decisions based on knowledge transfer between individuals from the lighting industry and universities. The proposed interactive study using survey research will be designed to enable participating individuals from …

Development Of Cal Poly’S Hybrid Ac/Dc House, Eduardo Andres Muñoz, Giovanni Ramirez Angel

Electrical Engineering

The Hybrid House provides an example for what sustainable housing solutions could look like. It also functions as a potential solution to the current rural electrification issues many developing countries face. The use of a DC-DC MISO converter allows for combining multiple power sources into a single DC bus. The Hybrid House integrates the DC bus by employing the use of DC-DC converters for home use. This system may potentially improve the overall system efficiency by avoiding the losses associated with AC-DC converters. The use of the DC bus further leverages the Solar Panel renewable energy solution to become a …

Utilizing Machine Learning Models To Estimate Energy Savings From An Industrial Energy System, Eva Mclaughlin, Jun-Ki Choi

Mechanical and Aerospace Engineering Faculty Publications

Energy audits are an important part of reducing energy usage, costs, and carbon emissions, but there have been discrepancies in the quality of audits depending upon the auditor, which can negatively affect the impacts and credibility of the energy assessment. In this paper, historical energy auditing data from a U.S. Department of Energy sponsored research program was gathered and analyzed with a machine-learning algorithm to predict demand savings from a compressed air system assessment recommendation in industrial manufacturing facilities. Different energy auditors calculate savings for repairing leaks in compressed air systems in various ways, so the energy demand savings have …

Overview Of Low-Cost Carriers In Russia And Post-Soviet States, Tamilla Curtis, Dawna L. Rhoades

Publications

The low-cost carrier's model made remarkable gains across the globe in the prior decade, although growth was uneven domestically and intraregionally. Within this region, there are significant differences in overall country size, the size of the domestic aviation market, and the number of carriers serving the market. The largest and most developed market is in Russia, but rest of the region also experienced growth in economy airlines' activity as they discovered the power of the model to expand aviation access and lower costs. The success of low-cost carriers, however, has been halting and hampered by government decisions on foreign investment, …

The Influence Of Environmental Tax And Technology On Different Air Pollution Emissions In Oecd Countries, Malak Ali Assaf

BAU Journal - Creative Sustainable Development

Although countries continuously employ taxation and technological measures to control air pollution in the Organization for Economic Co-operation and Development, the results of these practices should be evaluated to determine whether they reach their intended outcomes. This study used panel autoregressive distributed lag model to establish how environmental taxes and technology affects the emission of air pollutants (nitrogen oxides, Carbon dioxide, and particulate matter 2.5). Using secondary data present in the OECD Database and The World Bank, EViews panel was derived to create 3 model in which each of the three variables would be sufficiently explained by environmental tax, abatement …

Evidence On The Impact Of Corruption On Economic Growth: A Systematic Literature Review, Nour Mohamad Fayad

BAU Journal - Creative Sustainable Development

The relationship between corruption and economic growth is complex and has been extensively studied. Till recent days it is still one of the most genuine political challenges that all countries face. Even though anti-corruption measures have improved, they still lack consistency and clarity. Accordingly, this paper reviews the extant literature on this issue, by examining 66 research papers on the impact of corruption on economic growth. The study was aided by analysis of the theme Corruption and economic growth identified in the present literature. Impact of Corruption on economic growth has been tested in multiple studies utilizing time series, panel, …