Engineering Commons^™

Characterization Of An Impulse Radiating Antenna In The Near Field, Chandra Barjracharya

Electrical & Computer Engineering Theses & Dissertations

The biological effects of intense sub-nanosecond pulses on tissues or cells are in the dielectric domain and not based on thermal loading as in the conventional microwave radiation, which may lead to an entirely new approach of modifying cell functions. Moreover, the resulting cell functional change may be detected with higher resolution by broadband, sub-nanosecond pulses than conventional narrowband systems. The delivery of intense sub-nanosecond pulses to near-field biological tissues, however, has not been studied, not mentioning the focal depth and volume. In this dissertation, for the first time, an impulse radiating antenna with a balanced feed structure is studied …

Analyses Of Groundwater Contribution To A Riverine Wetland, Farzad Mahmoodinobar

Dissertations

Rainfall, runoff, overbank flow and groundwater, all contribute water to wetlands. Each transport element is associated with unique modeling approaches and uncertainties. Transpiration is perhaps the hardest to quantify as it is subject to all the variability of plant growth. Transpiration causes land area to lose moisture and the loss amount depends on precipitation incidence, the temperature and type and extent of vegetation. Plants can intercept virtually all recharge during the growing season and almost none from late fall to early spring in northeastern United States. Thus, an improvement in the transpiration element can contribute considerably to an improved groundwater …

Discrete Element Method Based Scale-Up Model For Material Synthesis Using Ball Milling, Priya Radhi Santhanam

Dissertations

Mechanical milling is a widely used technique for powder processing in various areas. In this work, a scale-up model for describing this ball milling process is developed. The thesis is a combination of experimental and modeling efforts.

Initially, Discrete Element Model (DEM) is used to describe energy transfer from milling tools to the milled powder for shaker, planetary, and attritor mills. The rolling and static friction coefficients are determined experimentally. Computations predict a quasi- steady rate of energy dissipation, Ed, for each experimental configuration. It is proposed that the milling dose defined as a product of Ed and milling …

Engineering Collaborations In Medical Modeling And Simulation, Frederic D. Mckenzie, Salim Chemlal, Tom Hubbard, Robert E. Kelly, Roderick C. Borgie, David A. Besachio, Michel Audette

Computational Modeling & Simulation Engineering Faculty Publications

Fifty years ago computer science was just beginning to see common acceptance as a growing discipline and very few universities had a computer science department although other departments were utilizing computers and software to enhance their methodologies. We believe modeling and simulation (M&S) is on a similar path. Many other disciplines utilize M&S to enhance their methodologies but we also believe that M&S fundamentals can be essential in making better decisions by utilizing the appropriate model for the problem at hand, expanding the solution space through simulation, and understanding it through visualization and proper analyses. After our students learn these …

Thermal And Cooling Systems Modeling Of Powertrain For A Plug -In Parallel-Through-The-Road Hybrid Electric Vehicle, Mengjia Cao

Wayne State University Theses

Thermal modeling and control play an ever increasing role with hybrid electric vehicle (HEV) design and development for improving overall vehicle energy efficiency, and to account for additional thermal loading from electric powertrain components such as electric motor, motor controller and battery pack.

This thesis presents a complete development process for an efficient modeling approach with integrated control strategy for the thermal management of plug-in HEV in a parallel-through-the road (PTTR) architecture, adopted by Wayne State University Hybrid Warriors for their Department of Energy's EcoCAR2 Plugging in to the Future Competition.

The frameworks of this project include simulating the thermal …

The Effects Of Asymmetric Micro Ratchets On Pool Boiling Performance, Lance Austin Brumfield

LSU Doctoral Dissertations

Nucleate boiling is an attractive method for achieving high heat flux at low superheat temperatures. It is frequently used for industrial applications such as heat exchangers and is being considered to cool advanced central processing units (CPU) which produce heat fluxes on the order of 1 MW/m2 and are becoming increasingly less efficient to cool via forced conduction of air. The issue with implementing nucleate boiling as a cooling mechanism lies in the difficulty of quantifying the numerous and complex mechanisms which control the process. A comprehensive nucleate boiling model has yet to be formulated and will be required in …

Generic Incident Model For Investigating Traffic Incident Impacts On Evacuation Times In Large-Scale Emergencies, Andrew J. Collins, Peter Foytik, Erika Frydenlund, R. Michael Robinson, Craig A. Jordan

VMASC Publications

Traffic incidents cause a ripple effect of reduced travel speeds, lane changes, and the pursuit of alternative routes that results in gridlock on the immediately affected and surrounding roadways. The disruptions caused by the secondary effects significantly degrade travel time reliability, which is of great concern to the emergency planners who manage evacuations. Outcomes forecast by a generic incident model embedded in a microscopic evacuation simulation, the Real-Time Evacuation Planning Model (RtePM), were examined to quantify the change in time required for an emergency evacuation that results from traffic incidents. The incident model considered vehicle miles traveled on each individual …

A Program Manager's Dilemma: Measuring The Effect On Performance Of Different Visual Modalities In Mixed Reality Aerial Door Gunnery, Jonathan Stevens

Electronic Theses and Dissertations

The United States Army continues to develop new and effective ways to use simulation for training. One example is the Non-Rated Crew Member Manned Module (NCM3), a simulator designed to train helicopter crewmembers in critical, high risk tasks such as crew coordination, flight, aerial gunnery, hoist and sling load related tasks. The goal of this study was to evaluate visual modalities' effect on performance in mixed reality aerial door gunnery. There is a strong belief in the United States Army that the greater the degree of immersion in a virtual simulation, the more effective that simulation is. However, little scientific …

Imperfect Situation Analysis: Representing The Role Of Error And Uncertainty In Modeling, Simulation And Analysis, Victor Eaton Middleton

Browse all Theses and Dissertations

Much of traditional modeling, simulation and analysis (MS&A) is supported by engineering models - deterministic, Newtonian physics-based representations of closed systems. Such approaches are not well-suited to represent the intricacies of human behavior. This research advocates and seeks to articulate the concept of a more human- centric approach to MS& A, one that better represents decision-making and other cognitive aspects of human behavior as well as it does physical activity.

It starts with a view of individuals and groups as complex adaptive systems, which are best represented using agent-based modeling. Representation of human behavior through intelligent agents incorporates models of …

Construction Of 3d Cardiopulmonary Resuscitation Emergency Scenarios For First Responder Pre-Nursing Training On Stereoscopic Display Systems, Alanzo Deon Granville

All ETDs from UAB

In today's society there is a need to have well prepared medical staff, especially in cases of cardiac arrest, and nurses are one of the first lines of defenses against cardiac arrest. They play a crucial role as first responders to administer cardiopulmonary resuscitation (CPR) to patients in need of resuscitation, but CPR history has demonstrated CPR as a difficult process to learn for both medical professionals and laypersons. There are consistent recurring changes in guidelines to improve CPR practice which may promote changes within CPR knowledge, and the administration of CPR may also differ in complexity depending on the …

Numerical Investigation Of Cryopreserved Zebrafish Sperm Cell Activation In Microchannels, Thomas Foster Scherr

LSU Doctoral Dissertations

This aim of this research project is to probe the activation process of zebrafish spermatozoa. Zebrafish are a model species for biological engineering applications, and the cryopreservation of their reproductive cells allows for inexpensive cataloging and maintenance of valuable biological material. Evaluation of cryopreservation protocols for aquatic sperm cells is typically accomplished by motility analysis after subjecting cells to a cryopreservation treatment. In zebrafish sperm cells, motility is initiated when cells come into contact with a hypo-osmotic environment. Subsequent activation analysis is currently done manually and brings with it an inherent difficulty and error. This process is slow and not …

An Algorithm To Recognize Multi-Stable Behavior From An Ensemble Of Stochastic Simulation Runs, Eduardo Monzon

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Synthetic biological designers are demanding tools to help with the design and verification process of new biological models. Some of the most common tools available aggregate multiple simulation results into one “clean” trajectory that hopefully is representative of the system’s behavior. However, for systems exhibiting multiple stable states, these techniques fail to show all the possible trajectories of the system. This work introduces a method capable of detecting the presence of more than one “typical” trajectory in a system, which can also be integrated with other available simulation tools.

Enhancing Gan Led Efficiency Through Nano-Gratings And Standing Wave Analysis, Gabriel M. Halpin

Master's Theses

Improving energy efficient lighting is a necessary step in reducing energy consumption.Lighting currently consumes 17% of all U.S. residential and commercial electricity, but a report from the U.S. Office of Energy Efficiency and Renewable Energy projects that switching to LED lighting over the next 20 years will save 46% of electricity used in lighting.GaN LEDs are used for their efficient conversion of electricity to light, but improving GaN efficiency requires optically engineering the chip to extract more light.Total internal reflection limits GaN LED performance since light must approach the chip surface within 23.6° of normal to escape into air.This thesis …

Simulation Of Vertical Axis Wind Turbines With Variable Pitch Foils, L. Damon Woods, John F. Gardner, Kurt S. Myers

Mechanical and Biomedical Engineering Faculty Publications and Presentations

A dynamic computer model of a turbine was developed in MATLAB in order to study the behavior of vertical axis wind turbines (VAWTs) with variable pitch (articulating) foils. The simulation results corroborated the findings of several empirical studies on VAWTs. The model was used to analyze theories of pitch articulation and to inform the discussion on turbine design. Simulations of various models showed that pitch articulation allowed Darrieus-style vertical axis wind turbines to start from rest. Once in motion, the rotor was found to accelerate rapidly to very high rotational velocities. The simulations revealed a plateau region of high efficiency …

Next Generation Crystal Viewing Tool, Zach Schaffter, Gerhard Klimeck

The Summer Undergraduate Research Fellowship (SURF) Symposium

The science and engineering community is limited when it comes to crystal viewing software tools. Each tool lacks in a different area such as customization of structures or visual output. Crystal Viewer 2.0 was created to have all of these features in one program. This one tool simulates virtually any crystal structure with any possible material. The vtkvis widget offers users advanced visual options not seen in any other crystal viewing software. In addition, the powerful engine behind Crystal Viewer 2.0, nanoelectronic modeling 5 or (NEMO5), performs intensive atomic calculations depending on user input. A graphical user interface, or GUI, …

Thin Electrical Double Layer Simulation Of Micro-Electrochemical Supercapacitors, Kaitlyn Fisher, Guoping Xiong, Timothy S. Fisher

The Summer Undergraduate Research Fellowship (SURF) Symposium

The deteriorating state of the environment has drawn many people to hybrid electric vehicles. Electrochemical micro-supercapacitors are of interest in this field because of their high power density relative to other micro-power sources. However, little is known about how the properties of the electrolyte used affect the performance of such devices. The first step of this investigation was to use thermoreflectance microscopy to measure the temperature change of the electrodes while charging and discharging supercapacitor samples. The components of these samples were graphitic petal electrodes with a Ti/Au covering (for enhanced light reflectance) on a SiO₂ base, with a …

Nanohub - Crystal Viewer 2.0, Kevin Margatan, Gerhard Klimeck

The Summer Undergraduate Research Fellowship (SURF) Symposium

nanoHUB is an online compilation of tools for simulations. Equipped with 3-D simulations and a capability to solve very complex calculations, nanoHUB provides its users worldwide with various tools to help them finish their assignments. One of the tools available is called a Crystal Viewer Tool, an advanced crystal visualization tool. This tool allows users to generate various crystal types including their every single detail. Currently, a newer version, called Crystal Viewer 2.0, is being tested prior to its release. However, this tool is lacking some important features and a GUI that is not as user friendly as expected. The …

Mems Lab Simulation Tool, Oluwatosin D. Adeosun, Sambit Palit, Ankit Jain, Muhammad A. Alam

The Summer Undergraduate Research Fellowship (SURF) Symposium

MEMS actuators have multiple design applications. Understanding their behavior as well as the ability to predict their actuation characteristics and voltage response is important when designing these actuators. In order to know these devices will behave, designers have to solve multiple analytical equations and experiments that can be very time consuming. Over the course of the summer a tool was created on nanoHUB that will allow users to enter information about a MEMS actuator and provide the voltage response of the actuator. To create the tool, scaling equations were first provided for various geometry configurations and the equations were next …

Simulation Of Beam Dynamics For Mems Devices, Saagar Unadkat, Devon Parkos, Alina Alexeenko

The Summer Undergraduate Research Fellowship (SURF) Symposium

Microelectromechanical Systems (MEMS) are systems made up of small components to complete a bigger goal. Some of these components can be modeled as small beams, which are anchored at both sides, or as cantilever beams. These beams can be subjected to various forces such as Knudsen Forces, Electrostatic Forces as well as G-loading. These devices have many applications such as sensors, actuators and even as accelerometers for airbags, smart phones and game controllers. Modeling the dynamics of these beams is an important task for the MEMS community, consisting of researchers, fabricators, and designers working on one of the many applications …

Kinetic Monte Carlo Simulations, Jingyuan Liang, R. Edwin García, Ding-Wen (Tony) Chung, David Ely

The Summer Undergraduate Research Fellowship (SURF) Symposium

Kinetic Monte Carlo (kMC) is a set of scientific libraries designed to deploy kMC simulations intended to simulate the time evolution of some processes occurring in nature. kMC is currently allows the user to intuitively generate single component crystal lattices to simulate, post process, and visualize the kinetic Monte Carlo-based atomistic evolution of materials. kMC provides an interface to the Stochastic Parallel PARticle Kinetic Simulator (SPPARKS) [1] and is specifically designed to simulate individual atomic deposition (condensation) and dissolution (evaporation) events, while simultaneously tracking the surface and bulk crystallographic anisotropic diffusion. The main goal of this project is to create …

Thermophotovoltaic System Efficiency Simulation, Qingshuang Chen, Roman Shugayev, Peter Bermel

The Summer Undergraduate Research Fellowship (SURF) Symposium

Thermophotovoltaic (TPV) power systems, which convert heat into electricity using a photovoltaic diode to collect thermal radiation, have attracted increasing attention in recent work. It has recently been proposed that new optical structures such as photonic crystals can significantly improve the efficiency of these devices in two ways. First, the electronic bandgap of the TPV diode should match the photonic bandgap of the emitter, in order to ensure that the majority of emitted photons can be converted. Second, a photonic crystal short-pass optical filter can be added to the front of the TPV diode to send long wavelength photons back …

The Stability And Control Of The Single Track Vehicles, Shyngys Karimov, Martin Corless

The Summer Undergraduate Research Fellowship (SURF) Symposium

Bicycles, motorcycles and scooters are all examples of the single track vehicles. The dynamics of the single track vehicle involve many degrees of freedom and various modes which govern its performance, making a complicated and interesting research topic. Motorcycle in motion can roll, yaw, and steer about the steering axis. It has three main modes which determine the motion and stability of it, they are weave, capsize, and wobble. The motorcycle performance is limited by the behavior of its modes, and if even one of the modes becomes unstable, the vehicle will roll over, and crash. The goal of this …

Developing A Crystal Viewer Tool For Nanohub, Osiris V. Ntarugera, Gerhard Klimeck

The Summer Undergraduate Research Fellowship (SURF) Symposium

Most materials found in nature have their atoms arranged in a regular and repeated pattern known as crystalline structure; this is particularly true for metals. It is very important to understand the crystal structure of materials in order to predict their properties such as the electric conductivity, heat transfer, and more. Particularly, students and scholars in the field of material science need a way to visualize the different crystal structures. Atomic structures of elements are not visible to the naked eye. In that context, a computer based tool can be used to simulate and to visualize the crystal structures of …

Direct Simulation Monte Carlo Simulation Toolkit For Equilibrium (0d) And Planar Couette Flow (1d), Austin I. Saragih, Alina A. Alexeenko

The Summer Undergraduate Research Fellowship (SURF) Symposium

Visualized simulation tool of Direct Simulation Monte Carlo (DSMC) is essential in aeronautical engineering and gas dynamics, by presenting information that can educate engineers and scientists to preliminarily understand the molecular gas dynamics and direct simulation of gas flows. Two educational tools and models are described for rarified gas flows and simulated particle collisions. A 0-Dimensional DSMC in approach to translational equilibrium was developed to simulate the speed distribution over time and the comparison between the final distribution and the Maxwell-Boltzmann distribution. A 1-Dimensional DSMC for Planar Couette flow was also developed to calculate the number of strikes of the …

Python-Based Simulation Tool For Kinetic Monte Carlo, Zaiwei Zhang, R. Edwin García

The Summer Undergraduate Research Fellowship (SURF) Symposium

Simulation tools are highly needed for testing or designing nanotechnology in university research projects.The problem in the current simulation tool used in our research, which is conducted by Prof.Garcia in MSE department at Purdue, is that users cannot observe the changing numbers of diffusivities during Vacancy Diffusion simulations between different materials. Also, there is no Graphic User Interface for the simulation tools.To solve the problem, the Virtual Kinetics of Materials Laboratory program is used to create the Graphic User Interface. Also, GTK+ toolkit has been used to create a pop-up window displaying updated diffusivities during the simulation. For user purpose, …

Developing A Framework For Determining The Contribution Of Transportation Project To Sustainable Development, Karim Ahmed Abdel Warith

Open Access Dissertations

In the past few years, stakeholders in the transportation industry have been concerned with sustainability. However, transportation decision makers have had difficulty incorporating sustainability into transportation infrastructure decisions. This is mainly attributed to the vagueness of the term. Incorporating sustainability into transportation decision making has been a desire put forth by engineers for that past 10 years. However, with no apparent method of defining sustainability, designers and decision makers have not been able to fulfill this desire.

This investigation attempts to define sustainability in a comprehensive and quantitative manner. The research proposes a new methodology that relies on the objective …

Technical Subtopic 2.1: Modeling Variable Refrigerant Flow Heat Pump And Heat Recovery Equipment In Energyplus, Florida Solar Energy Center, Richard Raustad

FSEC Energy Research Center®

The University of Central Florida/Florida Solar Energy Center, in cooperation with the Electric Power Research Institute and several variable-refrigerant-flow air conditioning (VRF AC) manufacturers, provided a detailed computer model for a VRF AC system in the United States Department of Energy's (U.S. DOE) EnergyPlus' building energy simulation tool. No other simulation tool currently has the capability to accurately model this state-of-the-art VRF heating, ventilating, and air conditioning (HVAC) equipment. Detailed laboratory testing and field demonstrations were performed to measure equipment performance and compare this performance with that predicted by the use of this new model through computer simulation.

This project …

Computational Modeling And Experimental Study On Optical Microresonators Using Optimal Spherical Structure For Chemical Sensing, Hanzheng Wang, Lei Yuan, Jie Huang, Xinwei Lan, Cheol-Woon Kim, Lan Jiang, Hai Xiao

Electrical and Computer Engineering Faculty Research & Creative Works

Chemical sensors based on optical microresonators have been demonstrated highly sensitive by monitoring the refractive index (RI) changes in the surrounding area near the resonator surface. In an optical resonator, the Whispering Gallery Modes (WGMs) with high quality (Q) factor supported by the spherical symmetric structure interacts with the contiguous background through evanescent field. Highly sensitive detection can be realized because of the long lifetime of the photons. The computational models of solid glass microspheres and hollow glass spheres with porous wall (PW-HGM) were established. These two types of microresonators were studied through simulations. The PWHGM resonator was proved as …

Bridging The Gap Between Simulation And Experiment With Multi-State Protein Folding, Jacob Lewis, Dr. Thomas Knotts

Journal of Undergraduate Research

Proteins are made up of extremely long chains of amino acids. Depending on it constituent amino acids, proteins fold in many 3-dimensional patterns to facilitate various biochemical processes such as catalyzing chemical reactions which allow us to live. How proteins fold is thought to be the “holy grail” of biochemistry research and, as of yet, no one has been able to predict exactly how a given sequence of amino acids will fold a priori. Protein folding has been probed in experiment and simulated on computers, but there are discrepancies between the two methods. Naturally, the experimental results are what computer …

Aspen Plus Simulation Of Biomass Gasification In A Steam Blown Dual Fluidised Bed, Wayne Doherty, Anthony Reynolds, David Kennedy

Book/Book Chapters

The efficient utilisation of biomass resources is of utmost importance. Biomass gasification offers much higher efficiencies than combustion. Gasification is a process in which a fuel is converted to a combustible gas (syngas). A dual fluidised bed gasifier known as the fast internally circulating fluidised bed (FICFB) was selected. It has been demonstrated at industrial scale and data is readily available for model validation. An Aspen Plus model was developed to simulate the FICFB gasifier. The model is based on Gibbs free energy minimisation and the restricted equilibrium method was used to calibrate it. The model has been validated and …