Engineering Commons^™

One Design Mode Of Highly Configurable Modular Simulation System, Chunsheng Hu, Chengdong Xu, Penfei Zhang

Journal of System Simulation

Abstract: The computer simulation technology is an essential verification way to the design, construction and application optimization of the modern complex system. Following the continuous growing complexity of the system, the higher requirement on the configurability of the simulation system is needed to face the rapidly change. Based on the analysis on the configurability and some coupling factors with the adverse effect, a design mode of highly configurable and open and easy to expend modular simulation system is proposed. The results show that, despite the cost of some real-time performance, the design mode can realize the high configurability of the …

Does The Use Of Simulation Significantly Impact Students’ Perceptions Of Their Air Traffic Control Knowledge And Skill?, Meron Lindenfeld, Jeanne Radigan, Michael Figuccio

Journal of Aviation Technology and Engineering

Simulation has served as an instructional supplement in education and training within various fields such as nursing, business, and flight training. Prior research studies have documented its usefulness. Simulation-based lessons have also been used for air traffic control (ATC) training, but little research has been conducted on the usefulness of simulation in this application. This study measured the level of influence that ATC simulation had on students’ perception of their ATC knowledge and skill level and their commitment to a career in ATC.

Data were collected by surveying students at four institutions of higher education after they completed ATC courses …

Multiscale Analysis Of Soil-Strap Interactions In Mechanically Stabilized Earth Retaining Walls, Max Willingham

Master's Theses (2009 -)

A numerical pullout test was built using the discrete element method (DEM) to model and capture the pullout response of steel reinforcements and soil in mechanically stabilized earth (MSE) walls. Through numerical modeling, microscale phenomena showing aggregate behavior in response to the reinforcement can be used to gain insight into the macroscale structure. The general setup of the simulation is a steel specimen encased in a rectangular apparatus filled with particles. A normal pressure is applied to the top layer of particles while the strap is slowly removed from the box until it reaches a prescribed displacement.The simulation was …

Validation Risk Across Hierarchical Models, John B. Young

Computational Modeling & Simulation Engineering Theses & Dissertations

Modeling and simulation are applied in a great many methods across a variety of topics. Model developers and users alike have a professional duty to understand the complexities of the tools and methods they are used. Oftentimes, models that have been independently constructed and executed are used to inform one another for an analytic purpose and the compatibility of the models is not always addressed. In the literature, great attention has been paid to model validation. When using models constructively with one another, analysts must understand the bounds of model validity and ensure that the combination of models does not …

Flight Characteristic Verification Of The Variable Camber Compliant Wing, Sharee B. Acosta

Theses and Dissertations

Morphing wing technology gives aircraft the ability to change wing shape to control the aircraft and flight performance characteristics. AFIT, AFRL and USU Aero Lab have collaborated to design and test a variable camber compliant wing (VCCW) on a small unmanned aerial vehicle (UAV). Flight tests demonstrated the wing performance and provided data to refine a VCCW flight simulator. Work was completed with the USU AeroLab-generated MachUp and the actual flight data to improve the simulator to provide results close to those of the actual flight test. The research provides a tool to reduce time and cost for future flight …

Emergency Evacuation Simulation For Dense Passenger Flow In A Rail Transit Transfer Station, Xu Hui, Tian Cheng, Wang Yong

Journal of System Simulation

Abstract: The rail transit is one of the important modes of the public transportation, and its safety operation is crucial. Based on the passenger volume and structure features that have been obtained through the field investigation in Chongqing Lianglukou railway station in China, a multi-level rail transit transfer station simulation model is built to analyze the evacuation process of pedestrians in the consideration of explosion and other emergencies by the software AnyLogic. The evacuation routes and evacuation time of passengers during emergency evacuation in a rail transit transfer station are studied. The research aims at verifying the emergency evacuation capacity …

Simulation Analysis On Flexible Track Drilling Machine Based On Adams, Yanchao Zhang, Ting Wang, Danlong Song

Journal of System Simulation

Abstract: The three-dimensional model of the flexible track drilling machine is designed by the virtual prototyping technology. The model is imported into ADAMS (Automatic Dynamic Analysis of Mechanical Systems) software to carry out the kinematics and dynamic simulation analysis of its virtual prototype, and the rationality and feasibility of the system design are evaluated. Through the comparative analysis, the reasonable driving velocity and acceleration parameters of the hole making system are given. According to the analysis of the dynamic characteristics of the systems, the asymmetric driving problems in the system are found and the corresponding improvement scheme is put forward. …

Novel Approaches For Evaluating The Performance Of Antenna Arrays For Massive Mimo Systems, Abbas Al-Wahhamy

Theses and Dissertations

Massive Multiple-Input Multiple-Output (MIMO) is a key promising technology for 5G networks that allows a significant increase in spectral and energy efficiency without increasing the spectrum and/or the number of cell sites. However, the computational time and resources required to rigorously analyze the capacity offered by a base station equipped with a large number of antenna elements increases with the increase of the number of antenna elements. A novel approach is presented for modeling large microstrip antenna arrays in base stations of massive MIMO systems. The approach subdivides an M×N array into columns, rows, rectangular, or square subarrays, each consisting …

Student Learning And Retention Using A Flight Training Device: A Case Study, Adeel Khalid

National Training Aircraft Symposium (NTAS)

Student learning and retention as a function of the mode of teaching is analyzed in this study. Different groups of students receive information about aircraft flight operations either via lecture, through directed study, a combination of the two or through a pre-recorded flight demonstration video. Their level of learning is assessed by evaluating how well they fly an aircraft and perform a predefined mission using a flight simulator. Scores of different groups are compared qualitatively and quantitatively and students are surveyed after the flight. It is hypothesized that students that learn through watching a demonstration video and have the ability …

Simulation And Design Tool For Supermileage Vehicle (Smv) Club Final Design Report, Kimberly Kodama, Sung Ho An, Justice Aragon

Mechanical Engineering

The purpose of this project is to create a sensitivities tool and start an optimization tool to assist the Cal Poly SMV Team in designing their vehicle, developing a driving strategy for competition, and becoming a contender in endurance events. The development of a user-friendly vehicle simulation and design tool was proposed by Professor Joseph Mello who is the club’s advisor. The SMV Team competes in endurance events such as the Supermileage competition or the Shell Eco-marathon with the goal of achieving the best mileage possible.

This report will present the research that has been conducted to understand and define …

Analysis Of An Energy Tuning Assembly For Simulating Nuclear Weapon Environments At The National Ignition Facility, Nicholas J. Quartemont, James E. Bevins, Rachel N. Slaybaugh, Lee A. Bernstein

Faculty Publications

An energy tuning assembly ETA was developed to spectrally shape the National Ignition Facility NIF deuterium-tritium D-T fusion neutron source to a notional thermonuclear and prompt fission neutron spectrum TNPFNS to approximate a boosted nuclear device. The spectrally shaped neutron environment can be used to create realistic synthetic post-detonation weapon debris that contain spectrally accurate fission products across all mass chains to enhance U.S. technical nuclear forensics capabilities for nuclear weapon attribution and device reconstruction. This research performed nuclear data covariance analysis through stochastic sampling techniques to predict the performance of an ETA to create the objective TNPFNS, assess anticipated …

Hybrid Phase-Change Lattice Boltzmann Simulation Of Vapor Condensation On Vertical Subcooled Walls, Wandong Zhao, Yuan Gao, Ruijie Li, Songgang Qiu, Yin Zhang, Ben Xu

Mechanical Engineering Faculty Publications

Saturated vapor condensation on homogenous and heterogeneous subcooled walls is presented in this study by adopting a hybrid phase-change multiple-relaxation-time Lattice Boltzmann model. The effects of wall wettability on the condensation process, including droplets’ growth, coalescence and falling, and the influence of vapor flow to condensation are investigated. The results demonstrate that the heat fluxes around the triple-phase contact lines are higher than that in other cold areas in homogeneous subcooled walls, which actually indicates the fact that filmwise condensation is preventing the continuous condensation process. Furthermore, the dropwise condensation can be formed more easily on the heterogeneous surface with …

Target Flow-Pressure Operating Range For Designing A Failing Fontan Cavopulmonary Support Device, Masoud Farahmand, Minoo N. Kavarana, Phillip M. Trusty, Ethan Kung

Publications

Fontan operation as the current standard of care for the palliation of single ventricle defects results in significant late complications. Using a mechanical circulatory device for the right circulation to serve the function of the missing subpulmonary ventricle could potentially stabilize the failing Fontan circulation. This study aims to elucidate the hydraulic operating regions that should be targeted for designing cavopulmonary blood pumps. By integrating numerical analysis and available clinical information, the interaction of the cavopulmonary support via the IVC and full assist configurations with a wide range of simulated adult failing scenarios was investigated; with IVC and full assist …

Design Of Air Defense Missile Weapon System Simulation Platform Based On Xsim Platform, Kaizhi Ruan, Qingqing Yuan, Wenhua Zhai, Zhiqiang Zhang

Journal of System Simulation

Abstract: Taking the system simulation technology which applied to the scheme argumentation, optimization design, flight test forecast, battle effectiveness evaluation of air defense missile weapon system as background, the design method of air defense missile weapon system simulation platform based on Xsim platform was put forward. The total configuration design, model design and simulation process design of the platform were discussed. An simulation platform of an air defense missile weapon system was accomplished. The result proves the platform can simulate the battle process of air defense missile weapon system, support the simulation work of air defense weapon at different …

Escape Route Designs And Specifications For Office Buildings - “Cciat” Building As A Case Study, Mostafa El-Hefnawi

BAU Journal - Creative Sustainable Development

Many office buildings encounter various problems with their fire safety evacuation designs. The Chamber of Commerce, Industry and Agriculture Tripoli - North Lebanon (CCIAT) is considered the only modern office building in its context that lacks fire escape elements and emergency plans. This paper presents an analysis and proposals for an optimal evacuation scenario for the case of the CCIAT building, and develop solutions for similar office buildings. The problem is interpreted with reference to the positions of existing staircases and lifts and their connectivity with occupants’ offices and other facilities on the floors, in order to provide a comprehensive …

Using Systems Archetypes And Generic Structures To Support Water Resource Management Studies : The Case Of Cropping Pattern Change In New Mexico State, Babak Bahaddin

Legacy Theses & Dissertations (2009 - 2024)

A wide range of managerial problems are similar in nature, and yet they continuously appear in different forms and in different geographical locations. Compared to other sciences, it seems that in the field of management, managers have a hard time facing these similar problems. Part of this issues is caused by the extreme complexity of the systems and another part is caused by the lack of a universal language with which managers can communicate their lessons. This dissertation offers a set of tools that have been previously manufactured in systems science, and more specifically in System Dynamics.

Development Of A Computationally Inexpensive Method Of Simulating Primary Droplet Breakup, Brendon A. Cavainolo

Honors Undergraduate Theses

Liquid droplet impingement on aircraft can be problematic as it leads to ice accretion. There have been many incidents of aircraft disasters involving ice accretion, such as American Eagle Flight 4184. Understanding liquid droplet impingement is critical in designing aircraft that can mitigate the damages caused by icing. However, the FAA's regulations are only specified for "Appendix C" droplets; thus, aircraft designs may not be safe when accounting for droplets such as Supercooled Large Droplets. The assumptions of many models, such as the Taylor-Analogy Breakup (TAB) model, are no longer accurate for Supercooled Large Droplets, and the physics of those …

Virtual Experiments For Engineering Education, Amy P. Lebanoff

Honors Undergraduate Theses

In-person engineering instruction relies on the availability of equipment and space. Cost, safety, and scheduling may pose barriers to conducting in-person labs. Virtual experiments may be used to enhance the student experience by, for example, incorporating pre-labs for in-person experiments and providing access to equipment that cannot be safely used in-person. Virtual learning is used in many fields, but there remain questions as to how it should be employed in engineering, an area largely reliant on in-person lab and classroom setups. Earlier studies reviewed the advantages of virtual labs such as demonstrating hard-to-observe phenomena and allowing unlimited trials. This project …

Optical Fiber Based Integrity Test Of Civil Engineering Materials: Numerical Analysis, Ruoyu Zhong

Masters Theses

“Major advancement in Civil Engineering cannot be accomplished without the help of sensors. Among different types of sensors, fiber-optic sensor is known for its light weight, high accuracy, resolution, immunity to electromagnetic interference, and resistance to harsh environment. This research mainly focuses on fiber-optic sensor application on concrete structures as temperature sensor. Thermal Integrity Profiling (TIP) is a non-destructive integrity testing method which makes use of the hydration heat from the concrete curing process to detect defects within a drilled shaft. Any defect of concrete could result in a temperature anomaly in a drilled shaft. The accuracy of the current …

Energy Forensics Analysis, Rupa Das

Graduate Theses, Dissertations, and Problem Reports (ETD)

The energy consumed by a building can reveal information about the occupants and their activities inside the building. This could be utilized by industries and law enforcement agencies for commercial or legal purposes. Utility data from Smart Meter (SM) readings can reveal detailed information that could be mapped to foretell resident occupancy and type of appliance usage over desired time intervals. However, obtaining SM data in the United States is laborious and subjected to legal and procedural constraints. This research develops a user-driven simulation tool with realistic data options and assumptions of potential human behavior to determine energy usage patterns …

Planar Motion Control Of A Cube Satellite Using Cold Gas Thrusters, Christian Lozoya

Open Access Theses & Dissertations

This Thesis presents a mathematical model developed for the computational simulation ofCubeSat movement using four thrusters that permit uniaxial translation and rotation. Arbitrary functions are fit to boundary conditions to simulate the force, acceleration, velocity, and displacement of the CubeSat along a plane. The model is used to derive a motion control algorithm assuming constant pressure and mass. A single model describes both translation and rotation. This Thesis also explores the relationship between propellant consumption and the time required to complete a displacement implied by the model.

Geoaware - A Simulation-Based Framework For Synthetic Trajectory Generation From Mobility Patterns, Jameson D. Morgan

Browse all Theses and Dissertations

Recent advances in location acquisition services have resulted in vast amounts of trajectory data; providing valuable insight into human mobility. The field of trajectory data mining has exploded as a result, with literature detailing algorithms for (pre)processing, map matching, pattern mining, and the like. Unfortunately, obtaining trajectory data for the design and evaluation of such algorithms is problematic due to privacy, ethical, dataset size, researcher access, and sampling frequency concerns. Synthetic trajectories provide a solution to such a problem as they are cheap to produce and are derived from a fully controllable generation procedure. Citing deficiencies in modern synthetic trajectory …

Simulation Of Lubricant Evaporation / Flow From A Nanoscale Film Under Laser Heating For Cloud-Storage Applications, Sean Anthony, Hannah Verbanac, Turki Alkhelaiwi

Williams Honors College, Honors Research Projects

The process known as heat-assisted magnetic recording is an advanced data storage technology which can be applied to develop higher data-density storage in next generation hard disk drives. Such drives are instrumental in the utility of server storage devices and the storage of large-data projects such as that of the Event Horizon Telescope array. During this process, data is written to a magnetic surface by means of laser heating; the coercivity of the magnetic medium is reduced by the heating of this surface, and within this heating period, data is able to be written to the disk in a smaller …

Investigation Of Host Nanotube Parameters For Enhancing The Performance Of Nanostructured Cds-Cdte Solar Cells, Deepak Kumar

Theses and Dissertations--Electrical and Computer Engineering

Numerical simulations are performed to investigate the effects of host nanotube parameters (pore diameter and pitch for different CdS coverages) and CdTe doping density on device performance in nanowire CdS/ CdTe solar cells using SCAPS-1D. This research finds the optimum values for these parameters in order to achieve the highest efficiency. Experimentally the effect of anodization voltage and fluoride ion concentration on the pore diameter and the pitch are studied for the Titania nanotubes host. It is observed that in the range of 0.3 mL to 2 mL of ammonium fluoride content, pore diameter and the pitch of the Titania …

Assessing The Potential Of Public Transit Utility In Medium-Sized Cities Using Agent-Based Simulation, Taniya Sultana

All ETDs from UAB

At the beginning of the twentieth century, the United States was leading in the public transit sector, but following World War II, private car trips became more affordable and more popular, specially, in the last few decades. Transportation infrastructure investments that increased road capacity enabled the development of suburbs leading to urban sprawl and increase in automobile use at the expense of reduced public transit ridership. With the increase of dependency in automobiles and the continuing growth of private automobile ownership and use, various problems became major challenges in big cities of USA. These include traffic congestion, air pollution, road …

Automatic Gaze Classification For Aviators: Using Multi-Task Convolutional Networks As A Proxy For Flight Instructor Observation, Justin Wilson, Sandro Scielzo, Sukumaran Nair, Eric C. Larson

International Journal of Aviation, Aeronautics, and Aerospace

In this work, we investigate how flight instructors observe aviator scan patterns and assign quality to an aviator's gaze. We first establish the reliability of instructors to assign similar quality to an aviator's scan patterns, and then investigate methods to automate this quality using machine learning. In particular, we focus on the classification of gaze for aviators in a mixed-reality flight simulation. We create and evaluate two machine learning models for classifying gaze quality of aviators: a task-agnostic model and a multi-task model. Both models use deep convolutional neural networks to classify the quality of pilot gaze patterns for 40 …

Generation Of Warm Dense Plasma On Solar Panel Infrastructure In Exo-Atmospheric Conditions, Harrison C. Wenzel

Theses and Dissertations

The use of a weaponized thermo-nuclear device in exo-atmospheric conditions would be of great impact on the material integrity of orbiting satellite infrastructure. Particular damage would occur to the multi-layered, solar cell components of such satellites. The rapid absorption of X-ray radiation originating from a nuclear blast into these layers occurs over a picosecond time scale and leads to the generation of Warm Dense Plasma (WDP). While incredibly difficult and costly to replicate in a laboratory setting, a collection of computational techniques and software libraries may be utilized to simulate the intricate atomic and subatomic physics characteristics of such an …

An Efficient Reliability Simulation Tool For Lifetime-Aware Analog Circuit Synthesis, Engi̇n Afacan

Turkish Journal of Electrical Engineering and Computer Sciences

Time-dependent degradation (aging) has become more severe in modern CMOS technologies. Therefore, it is highly critical to capture the variation effects and design reliable circuits against aging. Simulation of time-dependent variations is quite complicated since the degradation is a function of time, where the step count of simulation directly affects the accuracy and the efficiency of the analysis. Commercial simulator tools use a constant step count during reliability simulations, in which choosing a large step count degrades the efficiency whereas keeping it small may result in accuracy problems. To overcome this bottleneck, a couple of different approaches have been proposed …

Research On Simulation Platform For Equipment System Analysis, Yuping Li, Shaojie Mao, Zhenqi Ju, Zhou Fang, Guoqiang Yan

Journal of System Simulation

Abstract: With the development of equipment construction from platform-centric to network-centric, simulation analysis of equipment system is an important means and tool to support the transformation and development of equipment construction under the condition of multi-task joint operation. Starting from the requirement of system simulation analysis, a cloud-based equipment system simulation architecture is proposed to realize flexible and configurable simulation environment according to task requirements; and a high-performance simulation framework is conducted, which provides strong support for different application modes, such as parallel hyper-real-time and distributed simulation deduction. The unified description, organization and management method of model and data resources …

Research On Simulation Optimization Of Disk-Based Storage Operation Mode In Warehouse, Danlan Xie, Liu Meng, Haihong Yu, Chen Jing, Yubo Zhou, Kazi Mohiuddin

Journal of System Simulation

Abstract: As the efficiency of operation affects the overall competitiveness of the port, it is very necessary to design the storage operation mode reasonably. A disk-based storage operation mode is proposed. And the simulation model is established by using the logistics simulation software FlexSim based on the operational requirements of the warehouse. Through a large number of simulation experiments, comparing the primary storage mode with the disk-based storage mode, the results of the increase in total idle rate and the more balanced distribution of each hour utilization ratio of the forklifts are obtained. The result verifies the feasibility and effectiveness …