Engineering Commons^™

Providing A Theoretical Basis For Nanotoxicity Risk Analysis Departing From Traditional Physiologically-Based Pharmacokinetic (Pbpk) Modeling, Dirk P. Yamamoto

Theses and Dissertations

The same novel properties of engineered nanoparticles that make them attractive may also present unique exposure risks. But, the traditional physiologically-based pharmacokinetic (PBPK) modeling assumption of instantaneous equilibration likely does not apply to nanoparticles. This simulation-based research begins with development of a model that includes diffusion, active transport, and carrier mediated transport. An eigenvalue analysis methodology was developed to examine model behavior to focus future research. Simulations using the physicochemical properties of size, shape, surface coating, and surface charge were performed and an equation was determined which estimates area under the curve for arterial blood concentration, which is a surrogate …

Programmable Periodicity Of Quantum Dot Arrays With Dna Origami Nanotubes, Hieu Bui, Craig Onodera, Carson Kidwell, Yerpeng Tan, Elton Graugnard, Wan Kuang, Jeunghoon Lee, William B. Knowlton, Bernard Yurke, William L. Hughes

Materials Science and Engineering Faculty Publications and Presentations

To fabricate quantum dot arrays with programmable periodicity, functionalized DNA origami nanotubes were developed. Selected DNA staple strands were biotin-labeled to form periodic binding sites for streptavidin-conjugated quantum dots. Successful formation of arrays with periods of 43 and 71 nm demonstrates precise, programmable, large-scale nanoparticle patterning; however, limitations in array periodicity were also observed. Statistical analysis of AFM images revealed evidence for steric hindrance or site bridging that limited the minimum array periodicity.

Phenomena Characterization Of Energy Materials By X-Ray Absorption Spectroscopy, Ming-Yao Cheng, Chun-Jen Pan, Ju-Hsiang Cheng, Bing-Joe Hwang

Journal of Electrochemistry

The aim of this review is to introduce the characterization of energy materials by X-ray absorption spectroscopy (XAS) . This technique allows us to probe changes in the valance state and the local environment of the targeted element in the active material; thereby,leading to a better understanding of its electrochemical behavior,and hopefully showing the way to improved performance. Here,electrocatalysts for fuel cells and active electrode materials for Li-ion batteries are taken as the examples that illustrate the capability of XAS and allow observation and theory to be correlated with electrochemical phenomena.

Fabrication Of Fluorescent Nanoparticle-Polymer Composites For Photoactive-Based Materials, Brett Ellerbrock

All Theses

Nanocomposites of nanoparticles dispersed throughout a polymer matrix have been studied to great length to improve the overall polymer properties. These enhancements are observed in the thermal, physical, and/or optical characteristics. Being able to harness nanoparticles in such a way may help improve fiber technology into the 21st century.
This work was geared toward synthesizing rare earth doped lanthanum fluoride (LaF₃) nanoparticles because good separation in the absorption and emission bands of the material and it fluoresces in the visible to near-infrared range. Terbium ions were added to a LaF₃ crystal because of their distinct visible green …

Experiments And Modelling Of Micro-Jet Assisted Fluidization Of Nanoparticles, J. Ruud Van Ommen, David M. King, Alan Weimer, Robert Pfeffer, Berend Van Wachem

The 13th International Conference on Fluidization - New Paradigm in Fluidization Engineering

The fluidization of nanoparticle agglomerates can be largely improved by using downward pointing micronozzles, creating a high-velocity jet, as experimentally shown. By discrete particle simulations – treating the agglomerates as single particles – we show that the main reason is probably the reduction of the agglomerate size by agglomerate-agglomerate collisions.

Fluidization Of Nanopowders: Experiments, Modeling, And Applications, J. Ruud Van Ommen, Robert Pfeffer

The 13th International Conference on Fluidization - New Paradigm in Fluidization Engineering

Nanopowders are applied in a wide range of processes, and their use continues to increase. Fluidization is one of the best techniques available to disperse and process nanoparticles. However, nanoparticles cannot be fluidized individually; they fluidize as very porous agglomerates. Often, it is needed to apply an assisting method, such as vibration or microjets, to obtain proper fluidization. In this paper, we give a brief review of the developments in nanopowder fluidization.

A Reactive Molecular Dynamics Simulation Of The Silica-Water Interface, Joseph C. Fogarty, Hasan Metin Aktulga, Ananth Y. Grama, Adri C. T. Van Duin, Sagar A. Pandit

PRISM: NNSA Center for Prediction of Reliability, Integrity and Survivability of Microsystems

We report our study of a silica-water interface using reactive molecular dynamics. This first-of-its-kind simulation achieves length and time scales required to investigate the detailed chemistry of the system. Our molecular dynamics approach is based on the ReaxFF force field of van Duin [J. Phys. Chem. A 107, 3803 (2003)]. The specific ReaxFF implementation (SERIALREAX) and force fields are first validated on structural properties of pure silica and water systems. Chemical reactions between reactive water and dangling bonds on a freshly cut silica surface are analyzed by studying changing chemical composition at the interface. In our simulations, reactions involving silanol …

Synthesis, Structure, And Catalytic Properties Of Size-Selected Platinum Nanoparticles, Simon Armando Covone

Electronic Theses and Dissertations

The use of heterogeneous catalysis is well established in chemical synthesis, energy, and environmental engineering applications. Supported Pt nanoparticles have been widely reported to act as catalysts in a vast number of chemical reactions. In this report, the performance of Pt/ZrO2 nanocatalyst for the decomposition of methanol, ethanol, 2-propanol, and 2-butanol is investigated. The potential of each alcohol for the production of H2 and other relevant products in the presence of a catalyst is studied. All the alcohols studied show some decomposition activity below 200°C which increased with increasing temperature. In all cases, high selectivity towards H2 formation is observed. …

Microbial Reduction Of Uranium Under Iron- And Sulfate-Reducing Conditions: Effect Of Amended Goethite On Microbial Community Composition And Dynamics, H.S. Moon, L. Mcguinness, Ravi K. Kukkadapu, A.D. Peacock, John Komlos, L.J. Kerkhof, P.E. Long, Peter R. Jaffe

United States Department of Energy: Publications

There is a growing need for a better understanding of the biogeochemical dynamics involved in microbial U(VI) reduction due to an increasing interest in using biostimulation via electron donor addition as a means to remediate uranium contaminated sites. U (VI) reduction has been observed to be maximized during iron-reducing conditions and to decrease upon commencement of sulfate-reducing conditions. There are many unknowns regarding the impact of iron/sulfate biogeochemistry on U(VI) reduction. This includes Fe(III) availability as well as the microbial community changes, including the activity of iron-reducers during the uranium biostimulation period even after sulfate reduction becomes dominant. Column experiments …

Effects From Filtration, Capping Agents, And Presence/Absence Of Food On The Toxicity Of Silver Nanoparticles To Daphnia Magna, H. Joel Allen, Christopher A. Impellitteri, Dana A. Macke, J. Lee Heckman, Helen C. Poynton, James M. Lazorchak, Shekar Govindaswamy, Deborah L. Roose, Mallikarjuna N. Nadagouda

United States Environmental Protection Agency: Publications

Relatively little is known about the behavior and toxicity of nanoparticles in the environment. Objectives of work presented here include establishing the toxicity of a variety of silver nanoparticles (AgNPs) to Daphnia magna neonates, assessing the applicability of a commonly used bioassay for testing AgNPs, and determining the advantages and disadvantages of multiple characterization techniques for AgNPs in simple aquatic systems. Daphnia magna were exposed to a silver nitrate solution and AgNPs suspensions including commercially available AgNPs (uncoated and coated), and laboratory-synthesized AgNPs (coated with coffee or citrate). The nanoparticle suspensions were analyzed for silver concentration (microwave acid digestions), size …

Far-Field Optical Nanoscopy Based On Continuous Wave Laser Stimulated Emission Depletion, C. Kuang, Wei Zhao, Guiren Wang

Faculty Publications

Stimulated emission depletion (STED) microscopy is one of the breakthrough technologies that belong to far-field optical microscopy and can achieve nanoscale spatial resolution. We demonstrate a far-field optical nanoscopy based on continuous wave lasers with different wavelengths, i.e., violet and green lasers for excitation and STED, respectively. Fluorescent dyes Coumarin 102 and Atto 390 are used for validating the depletion efficiency. Fluorescent nanoparticles are selected for characterizing the spatial resolution of the STED system. Linear scanning of the laser beams of the STED system along one line of a microscope slide, which is coated with the nanoparticles, indicates that a …

Plasmon Enhanced Near-Field Interactions In Surface Coupled Nanoparticle Arrays For Integrated Nanophotonic Devices, Amitabh Ghoshal

Electronic Theses and Dissertations

The current thrust towards developing silicon compatible integrated nanophotonic devices is driven by need to overcome critical challenges in electronic circuit technology related to information bandwidth and thermal management. Surface plasmon nanophotonics represents a hybrid technology at the interface of optics and electronics that could address several of the existing challenges. Surface plasmons are electronic charge density waves that can occur at a metal-dielectric interface at optical and infrared frequencies. Numerous plasmon based integrated optical devices such as waveguides, splitters, resonators and multimode interference devices have been developed, however no standard integrated device for coupling light into nanoscale optical circuits …

Itraconazole Loaded Poly (Lactic-Co-Glycolic) Acid Nanoparticles For Improved Antifungal Activity, Nipur Rajan Patel

LSU Master's Theses

PLGA (polylactic-co-glycolic acid) nanoparticles containing the hydrophobic antifungal Itraconazole (ITZ) were developed to address the need for more efficient means of treating fungal infections. PLGA-ITZ nanoparticles were synthesized using an oil-in-water emulsion evaporation method. The nanoparticles morphology (TEM), size and size distribution, zeta potential (DLS), encapsulation efficiency (UV-VIS), release profile, and antifungal activity were characterized. The blank NPs and loaded PLGA-ITZ NPs were spherical with diameters of 201±5 nm, 232±1 nm and 223±36 nm at 0%, 12.5% and 25% loadings, respectively. All synthesized particles measured a negative zeta potential ranging from -28 to -33 mV. The maximum encapsulation efficiency of …

Antisense Silver Nanoparticles For Photo-Activated Gene Silencing, Paige Kathleen Brown

LSU Master's Theses

The unique properties of noble metal nanoparticles, which include tunable electronic and photonic characteristics, contribute to their potential as novel delivery vectors with enhanced drug stability, cell uptake, and photo-activated functionalities. Silver, as one of best surface-enhancing substrates available for bulk nanostructure synthesis, is a prime choice for investigations of metal nanohybrids as antisense therapy vehicles with special surface plasmon resonance (SPR) enabled functional attributes. The singular photonic properties of silver nanoparticles (SNPs) may contribute to ease of delivery confirmation and in situ photo-activation of protected cargo packed on particle surfaces. Here we show the synthesis and characterization of 40-80nm …

Mesoporous Tin Oxide As An Oxidation-Resistant Catalyst Support For Proton Exchange Membrane Fuel Cells, Peng Zhang, Sheng-Yang Huang, Branko N. Popov

Faculty Publications

Mesoporous catalyst support based on tin oxide (SnO₂) is synthesized with high surface area of 205 m² g⁻¹ and with narrow pore size distribution. Modified polyol method is used to deposit platinum on SnO₂. The physical properties of the support and the SnO₂-supported Pt catalyst (Pt/SnO₂) are characterized by using the Brunauer, Emmett, and Teller method, X-ray diffraction, and transmission electron microscopy. The electrochemical stability and durability of the Pt/SnO₂ catalyst are investigated by the accelerated stress tests proposed by the U.S. Department of Energy. Pt/SnO₂ catalyst exhibits …

Radiation Detectors And Sources Enhanced With Micro/Nanotechnology, Chad Michael Whitney

Doctoral Dissertations

The ongoing threat of nuclear terrorism presents major challenges to maintaining national security. Currently, only a small percentage of the cargo containers that enter America are searched for fissionable bomb making materials. This work reports on a multi-channel radiation detection platform enabled with nanoparticles that is capable of detecting and discriminating all types of radiation emitted from fissionable bomb making materials. Typical Geiger counters are limited to detecting only beta and gamma radiation. The micro-Geiger counter reported here detects all species of radiation including beta particles, gamma/X-rays, alpha particles, and neutrons. The multi-species detecting micro-Geiger counter contains a hermetically sealed …

Phase Change Mechanisms During Femtosecond Laser Pulse Train Ablation Of Nickel Thin Films, Xin Li, Lan Jiang, Hai-Lung Tsai

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The mechanisms of nickel thin films irradiated by femtosecond laser pulse trains are studied by a model using molecular dynamics simulations and two-temperature model. It is found that the pulse train technology can change energy transport and corresponding phase change processes. Compared with single pulse ablation at the same total fluence, the pulse trains lead to (1) lower ablation rate with more and smaller uniform nanoparticles, (2) higher film surface temperatures and longer thermalization time, (3) much lower electron thermal conductivity that can further control heat-affected zone, (4) significantly smaller film compressive stresses and tensile stresses which reduce microcracks, and …

Photoelectrochemical Properties Of Tio2 Nanoparticles, Jie Qu, Ying Li, Qi-Wei Jiang, Xue-Ping Gao

Journal of Electrochemistry

The protonated titanate nanoparticles were obtained at room temperature and subsequently calcined at different temperatures(300 ℃,400 ℃,500 ℃,600 ℃ and 700 ℃) in air.The obtained products were characterized by XRD,TEM and UV-Vis.It is found that the grain sizes of TiO₂ nanoparticles calcined at 300 ℃ were about 20 nm,and increased gradually with the temperature rise.Photoelectric performance was measured with I～V curve and electrochemical impedance spectroscopy(EIS).The TiO₂ nanoparticles obtained at 500 ℃ showed the best photoelectrochemical properties with a photovoltaic conversion efficiency of 6.39%,which is much higher than those at other temperatures.In addition,it is also demonstrated that the charge …

Precipitation Of Micro/Nanoparticles In Enhanced High Energy Dissipation Mixing Systems, Giuseppe Di Benedetto

Dissertations

Crystallization is the most common unit operation used in the pharmaceutical industry to synthesize active ingredients. Rapid development of a drug candidate is dependent on the ability to produce a desired drug substance with consistent properties, These properties include stability and purity, which are directly affected by the crystallization process and which affect, in turn, bioavailability, drug dissolution rate, drug stability, and shelf life.

The objective of this work is to produce micro/nanoparticle crystals within existent glass-lined pharmaceutical stirred-tank reactors by modifying the current reactor configuration to include features that can increase the local rate of energy dissipation in the …

Enhanced Fluidization Of Nanoparticle Agglomerates, Daniel Lepek

Dissertations

Gas fluidization of nanoparticle agglomerates has recently received much attention due to the excellent way in which these novel nanornaterials can be dispersed in a gaseous medium. Nanopowders have a very high surface area to volume ratio which allows them have unique chemical and physical properties especially at the surface. Fluidization is a popular technique for the continuous dispersal of solid materials in the fluidlike state.

Recently it has been found that nanoparticles exist in a highly agglomerate state which allow them to become fluidizable. The fluidization behavior of the nanopowders is dependent on the bulk and material properties of …

Synthesis And Characterization Of Birnessite And Cryptomelane Nanostructures In Presence Of Hoffmeister Anions, Marcos A. Cheney, Robin Jose, Arghya Banerjee, Pradip K. Bhowmik, Shizhi Qian, Joseph M. Okoh

Mechanical & Aerospace Engineering Faculty Publications

The effect of Hoffmeister anions Cl(-), SO(4) (2-), and ClO(4) (-) on the structure and morphology of birnessite and cryptomelane-type manganese dioxide nanostructures, produced by the reduction reaction of KMnO(4) and MnSO(4) in aqueous acidic media, was studied. The syntheses were based on the decomposition of aqueous KMnO(4) in presence of HCl for birnessite-type and acidified MnSO4 for cryptomelane-type manganese dioxide under soft hydrothermal conditions. They were characterized using X-ray diffraction (XRD), transmission electron microscopy (TEM), and high-resolution transmission electron microscopy (HRTEM) techniques. XRD patterns show the formation of birnessite for the first synthesis and a mixture of cryptomelane and …

Observed Superspin-Glass Behavior In Ni0.5zn0.5fe2o4 Nanoparticles, Antony Adair

Open Access Theses & Dissertations

In this investigation we seek to identify the magnetic behavior of Ni0.5Zn0.5Fe2O4 nanoparticles though AC-susceptibility and DC-magnetization measurements. Powder x-ray diffraction was performed to determine the purity and average diameter ( ~ 9nm) of the particles. Aditionally, structure was confirmed by comparison through the International Centre for Diffraction Data's Powder Diffraction File [52] (PDF # 08-0234).

Zero-field cooled and field cooled DC magnetization measurements (bifurcation and blocking temperature), as well as M(H) hysteresis (below and above the blocking temperature) lead us to initially suggest that the material may in fact be superparamagnetic. However, further investigation of the real AC susceptibility …

Spectroscopic Investigation Of Palladium-Copper Bimetallic Systems For Pem Fuel Cell Catalysts, Timo Hofmann

UNLV Theses, Dissertations, Professional Papers, and Capstones

One of the main barriers to commercialization of polymer electrolyte membrane fuel cells systems is cost, which is largely due to the need of platinum (Pt)-containing catalysts. In this thesis we investigate bimetallic systems consisting of a base metal (copper) and a noble metal (palladium) that, as an alloy on the nanoscale, mimic the electronic properties that make Pt desirable as a catalyst.

We present a detailed investigation of the electronic structure of carbon-supported Pd/Cu nanoparticle catalysts, model bilayer thin film systems, alloys, and various metal reference samples. We have investigated the valence band structure of the catalysts using a …

Research On The Transport And Deposition Of Nanoparticles In A Rotating Curved Pipe, Jianzhong Lin, Peifeng Lin, Huajun Chen

Mechanical Engineering Faculty Research

A finite-volume code and the SIMPLE scheme are used to study the transport and deposition of nanoparticles in a rotating curved pipe for different angular velocities, Dean numbers, and Schmidt numbers. The results show that when the Schmidt number is small, the nanoparticle distributions are mostly determined by the axial velocity. When the Schmidt number is many orders of magnitude larger than 1, the secondary flow will dominate the nanoparticle distribution. When the pipe corotates, the distribution of nanoparticle mass fraction is similar to that for the stationary case. There is a “hot spot” deposition region near the outside edge …

Particle-Chemical Interactions And Environmental Chemodynamics Of Fine And Ultrafine Particles In A Natural Disaster Scenario, Nicholas A. Ashley

LSU Doctoral Dissertations

The interactions of fine and ultrafine particles with chemicals play a dominant role in determining the mobility and availability of pollutants in the environment. Fine particles in sediments can sequester chemicals from the water column, and release volatile and semi-volatile organic compounds to the gas phase upon exposure to air. Ultrafine particles which are photoreactive can degrade these vapor-phase contaminants, and may transform the molecules into species which are more toxic or hazardous than the parent. As the widespread, commercial use of ultrafine particles becomes more common, understanding the chemodynamics of these particles and their interactions with chemicals in the …

Production Of Nanocrystalline Rdx By Ress : Development And Material Characterization, Victor Stepanov

Dissertations

The aim of the present work was to address the hazardous vulnerability of energetic materials to accidental initiation. An improved form of the explosive RDX with a significantly reduced sensitivity to stimuli including shock and impact was sought. The direction of this research was to investigate the effect of RDX crystal size reduction down to nano-scale dimensions on the sensitivity characteristics. Although size reduction of energetic crystals has been demonstrated often to result in a sensitivity reduction, the effect at the nano-scale particle size has not been investigated.

To generate nanocrystalline RDX a recrystallization process was developed based on rapid …

An Ultrahigh Vacuum Complementary Metal Oxide Silicon Compatible Nonlithographic System To Fabricate Nanoparticle-Based Devices, Arghya Banerjee, Biswajit Das

Electrical & Computer Engineering Faculty Research

Nanoparticles of metals and semiconductors are promising for the implementation of a variety of photonic and electronic devices with superior performances and new functionalities. However, their successful implementation has been limited due to the lack of appropriate fabrication processes that are suitable for volume manufacturing. The current techniques for the fabrication of nanoparticles either are solution based, thus requiring complex surface passivation, or have severe constraints over the choice of particle size and material. We have developed an ultrahigh vacuum system for the implementation of a complex nanosystem that is flexible and compatible with the silicon integrated circuit process, thus …

Mixing Of Nanoparticles In A Stirred Tank In High Pressure Carbon Dioxide, Nitin Aggarwal

Theses

Mixing of nanoparticles of different compositions offers wide opportunities in manufacturing new nanocomposite materials with unique electronic, optical, mechanical, and chemical properties. However, due to large cohesive forces between nanoparticles, they often form large micron-sized agglomerates, thus losing their main advantage of small size and high surface area. Therefore, breaking of these agglomerates is necessary prior to mixing. One of the techniques to achieve deagglomeration and mixing of nanoparticles is based on rapid depressurization/expansion of supercritical suspensions. where the suspension of initially premixed agglomerates in supercritical CO₂ pass through the nozzle undergoing deagglomeration as a result of rapid expansion …

Magnetically Assisted Impaction Mixing Of Nanosize Particles, James V. Scicolone

Theses

Magnetically assisted impaction mixing (MAIM) is a novel dry mixing technique, which can be used to mix nanoparticles. Mixing of nanoparticles is usually conducted in solvent-based mixing techniques. The solvents used in these techniques are usually organic, which can be expensive and harmful to the environment. MAIM creates homogeneous nanoparticle mixtures while eliminating conditioning and drying steps associated with wet mixing techniques. To create the best mixing quality of nanoparticles, MAIM was optimized by studying the effects of magnet-to-sample ratio, time, magnet size, and constituents of the mixture. The results were then compared with other well-known mixing techniques.

To characterize …

Probing And Tuning The Size, Morphology, Chemistry And Structure Of Nanoscale Cerium Oxide, Satyanarayana Kuchibhatla

Electronic Theses and Dissertations

Cerium oxide (ceria)-based materials in the nanoscale regime are of significant fundamental and technological interest. Nanoceria in pure and doped forms has current and potential use in solid oxide fuel cells, catalysis, UV- screening, chemical mechanical planarization, oxygen sensors, and bio-medical applications. The characteristic feature of Ce to switch between the +3 and + 4 oxidation states renders oxygen buffering capability to ceria. The ease of this transformation was expected to be enhanced in the nanoceria. In most the practical scenarios, it is necessary to have a stable suspension of ceria nanoparticles (CNPs) over longer periods of time. However, the …