Engineering Commons^™

Developing Workflows For Passive Acoustic Detection Of Bedload Transport, Quinn Morgan

Dissertations and Theses

Bedload transport is defined as the amount of sediment, including gravel and rocks, traveling down stream. Monitoring bedload transport is important for river safety, hydrological studies and conservation efforts. Existing methods of directly measuring bedload transport (or bedload flux) involve lowering a collection device into a river and measuring the sediment collected; which can be expensive and time consuming. Hydroacoustic sensors, such as hydrophones, have had success tracking bedload flux remotely. This works by measuring the relatively high frequency of sediment impacts to map onto total bedload transported. No perfected method for detection of sediment generated noise (SGN) currently exists. …

A Polar Turbulence Invariant Map With Applicability To Realisable Machine Learning Turbulence Models, James G. Wnek, Christopher Schrock, Eric M. Wolf, Mitch Wolff

Mechanical and Materials Engineering Faculty Publications

Invariant maps are a useful tool for turbulence modelling, and the rapid growth of machine learning-based turbulence modelling research has led to renewed interest in them. They allow different turbulent states to be visualised in an interpretable manner and provide a mathematical framework to analyse or enforce realisability. Current invariant maps, however, are limited in machine learning models by the need for costly coordinate transformations and eigendecomposition at each point in the flow field. This paper introduces a new polar invariant map based on an angle that parametrises the relationship of the principal anisotropic stresses, and a scalar that describes …

Predicting Groundwater Withdrawals Using Machine Learning With Limited Metering Data: Assessment Of Training Data Requirements, Dawit Asfaw, Ryan G. Smith, Sayantan Majumdar, Katherine Grote, Bin Fang, B. B. Wilson, V. Lakshmi, J. J. Butler

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The future of major aquifer systems supporting irrigated agriculture is threatened due to unsustainable groundwater pumping. Metering of pumping is key for implementing robust groundwater management, but metering is limited in most aquifers. Although machine learning methods have been used to estimate pumping over certain regions, these studies have not fully demonstrated the data quantity and input parameter requirements to accurately estimate regional groundwater pumping. This study determined the data quantity required and identified relevant features to develop Random Forests-based annual groundwater pumping estimates (2008–2020) over the Kansas High Plains aquifer. We predicted pumping at two spatial scales, i.e., point …

Multi-Fidelity Machine Learning Modeling For Aerodynamic Response Prediction Of Aerospace Vehicles, Ethan S. Jackman

Theses and Dissertations

Hypersonic vehicle design requires understanding complex aerodynamic phenomena across the full flight regime. This study presents a novel MF surrogate modeling methodology that enables the prediction the full field response across a vehicle’s surface. A Space-Filling Curve (SFC) is used to convert unstructured data into 1D vectors. The a Convolutional Autoencoder is used with transfer learning to reduce the dimensionality of the data. An Emulator-Embedded Neural Network (E2NN) combines multi-fidelity data for fast, accurate predictions. A benchmark analytical example and hypersonic application are used to evaluate the methodology. Using various numbers of samples and sampling strategies it is found that …

Efficient Inference Of Performance Models In Openmp Applications, Gaurav Punjabi

Computer Science and Engineering Master's Theses

Choosing the best OpenMP parameters such as thread count, scheduling type, and chunk size is essential for optimizing parallel program performance. One of the promising approaches is to infer a (pre-trained) performance model at runtime to determine the parameters to run OpenMP parallel regions. Such a performance prediction model can require programs’ code information such as intermediate representation (IR) and other at-runtime information (e.g., input sizes) to make a performance prediction. In such a scenario, extracting or querying the IR information at runtime can create a significant runtime overhead. This thesis proposes a compiler-asssited tuning framework that shifts IR extraction …

Physics-Based Machine Learning Framework For Predicting Structure-Property Relationships In Ded-Fabricated Low-Alloy Steels †, Atiqur Rahman, Md Hazrat Ali, Asad Waqar Malik, Muhammad Arif Mahmood, Frank Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The Directed Energy Deposition (DED) process has demonstrated high efficiency in manufacturing steel parts with complex geometries and superior capabilities. Understanding the complex interplays of alloy compositions, cooling rates, grain sizes, thermal histories, and mechanical properties remains a significant challenge during DED processing. Interpretable and data-driven modeling has proven effective in tackling this challenge, as machine learning (ML) algorithms continue to advance in capturing complex property structural relationships. However, accurately predicting the prime mechanical properties, including ultimate tensile strength (UTS), yield strength (YS), and hardness value (HV), remains a challenging task due to the complex and non-linear relationships among process …

Low-Resource Ecoacoustic Audio Classification, Enis Berk Coban

Dissertations, Theses, and Capstone Projects

Ecoacoustic monitoring via machine learning enables scalable analysis but is often constrained by labeled data scarcity, particularly in remote regions like the Arctic. This thesis confronts low-resource ecoacoustic audio classification by developing and evaluating complementary machine learning methodologies. We introduce EDANSA, the first publicly available, expert- labeled Arctic dataset of its kind, curated via novel active learning, alongside a baseline CNN. We systematically evaluate transfer learning, showing general audio embeddings effectively bootstrap classifiers for challenging Arctic sounds, significantly outperforming direct label mapping. Optimizing label utility, we investigate standard data augmentation and introduce novel audio data valuation via Shapley values, revealing …

Retracted: Iot Flow Parameters Classification Based On Machine Learning Techniques, El-Sayed M. El-Kenawy, Marwa M. Eid, Ban Salman Shukur, Amel Ali Alhussan, Doaa Sami Khafaga

Iraqi Journal for Computer Science and Mathematics

In recent years, there has been a highly remarkable convergence of artificial intelligence (AI) and the Internet of Things (IoT), which has made rapid progress in smart city initiatives by developing smart devices for such cities. Since these devices are increasingly diversified, they require a resilient communication network to demonstrate high performance in managing consistent traffic flows. A machine learning model intended for identifying network parameters from diverse devices, in addition to proposing modifications meant for network performance enhancement, is developed in this study. In relation to packet data as a network traffic parameter, employing gateway devices can facilitate its …

Research On Autonomous Deviation Correction Of Tunnel Boring Machines And Parameters Based On Machine Learning, Zhang Jun, Li Maopeng

Journal of China & Foreign Highway

In order to solve the problem of realizing the autonomous deviation correction of tunnel boring machines (TBMs ), a TBM deviation correction control method that integrated the random forest (RF) algorithm with the genetic algorithm (GA) was proposed based on actual engineering data.The method combined a prediction model with an optimization model,using target deviation values as input to invert and output the required TBM deviation correction parameter values,thereby further improving the automation level of TBM deviation correction.By comparing it with the actual data,the feasibility of the model was verified.The results show that the RF algorithm-based prediction model achieves an R2 …

Ai-Driven Solutions For Electricity Fraud Detection: A Data-Centric Approach, Fatemeh Alimoradi, Zahra Alimoradi, S. Mohammadali Zanjani, Ghazanfar Shahgholian

NJF Intelligent Engineering Journal

Electricity fraud detection presents a significant challenge for power distribution companies, as non-technical losses resulting from fraudulent activities adversely affect revenue and operational efficiency. This study presents a machine learning-driven approach for accurately identifying fraudulent electricity consumption patterns. A comprehensive analysis of electricity usage data is conducted using multiple classification models, including Support Vector Machine (SVM), K-Nearest Neighbors (KNN), a Stacking Model integrating SVM, KNN, Random Forest, and Gradient Boosting, as well as a Weighted Model leveraging confidence-based prediction adjustments. Model performance is evaluated using key metrics, including accuracy, precision, recall, F1-score, AUC-ROC, and confusion matrices. The results indicate that …

Application Of Ann Artificial Network In Slope Behavior Evaluation Using Machine Learning Technique, Marziyeh Tourani, Hadi Bahadori

NJF Intelligent Engineering Journal

In geotechnical engineering, evaluating slope stability remains a significant challenge due to inherent soil variability and environmental uncertainty. This study explores the application of Artificial Neural Networks (ANN) in predicting the factor of safety (FoS) of slopes using dimensionless input variables. An initial dataset of 349 samples was refined to 259 validated cases after removing outliers and incomplete entries. The input parameters were transformed into nondimensional forms c / γh, (tan(⌀)) / (tan (β)), and p / γh based on fluid mechanics principles to improve generalization and reduce dimensional bias. A feedforward ANN model …

Machine Learning And Clinical Eeg Data For Multiple Sclerosis: A Systematic Review, Badr Mouazen, Ahmed Bendaouia, El Hassan Abdelwahed, Giovanni De Marco

Manufacturing & Industrial Engineering Faculty Publications

Multiple Sclerosis (MS) is a chronic neuroinflammatory disease of the Central Nervous System (CNS) in which the body’s immune system attacks and destroys the myelin sheath that protects nerve fibers, leading to a wide range of debilitating symptoms and causing disruption of axonal signal transmission. Accurate prediction, diagnosis, monitoring and treatment (PDMT) of MS are essential to improve patient outcomes. Recent advances in neuroimaging technologies, particularly electroencephalography (EEG), combined with machine learning (ML) techniques — including Deep Learning (DL) models — offer promising avenues for enhancing MS management. This systematic review synthesizes existing research on the application of ML and …

A Machine Learning Approach To Detect Pores In Laser Powder Bed Fusion Additive Manufacturing, Jose Galarza, Jose Barron Jr., Luis Jimenez, Tamer Oraby, Jianzhi Li, Farid Ahmed

Manufacturing & Industrial Engineering Faculty Publications

Real-time detection of pores in the Laser Powder Bed Fusion (LPBF) metal Additive Manufacturing (AM) process is proposed in this study and can be utilized for in-situ process monitoring and quality control. The average light emission data from the process captured by an optical tomography camera can be integrated into a defect detection module to characterize defects after the deposition of a layer. The light emission contains information on the process zone which could be extracted with the appropriate data techniques. In this paper, we proposed a machine-learning approach that utilizes the mean light intensity data from the melt-pool monitoring …

Discovery Of High-Performance Cathode Materials For Protonic Ceramic Fuel Cells, Liang Han

All Dissertations

Environmental pollution and rapid energy consumption have become common problems in global development and will continue to grow with the world population. PCFCs use proton-conducting ceramics as electrolytes, with low activation energy and high ionic conductivity at intermediate temperatures, enabling them to operate at intermediate-temperature conditions, which can effectively solve the problems of poor stability and high cost of exotic materials of traditional solid oxide fuel cells. However, as the operating temperature decreases, the electrocatalytic activity of the cathode decreases significantly, seriously affecting PCFC’s performance. Therefore, developing high-performance cathode material suitable for working under intermediate-temperature conditions has become the key …

Intelligent Multi-Layer Optical Network Design And Network Softwarization, Boyang Hu

Dissertations and Doctoral Documents, University of Nebraska-Lincoln, 2023–

The growing demand for high-capacity, low-latency services has placed significant pressure on the design and operation of optical transport networks. Multi-layer optical network design—which coordinates the physical layer with higher-layer protocols—has emerged as a critical strategy to enhance resource efficiency, service flexibility, and fault resilience. Enabled by advancements in software-defined networking (SDN) and network softwarization, intelligent multi-layer architectures allow for adaptive, cross-layer control of routing, grooming, and protection mechanisms, ultimately reducing both capital and operational expenditures.

This dissertation investigates the intelligent design and simulation of multi-layer optical networks through the integration of SDN, machine learning, and high-fidelity physical-layer modeling. We …

Machine Learning Based Medical Ultrasound Image Classification And Grad-Cam Interpretation, Victoria C. Hemphill

All Theses

This work takes a step in creating a diagnostic tool for the classification decision process of Achilles tendinopathy using ultrasound images. An attention-based multiple instance learning model is developed to classify the images. Typically, doctors capture multiple ultrasound images of the Achilles tendon during a study to determine a complete diagnosis. Multiple instance models adopt this behavior by providing a single label for a set of instances (images). The images are grouped into ”bags” at the study level and passed into the model. The MIL model then uses its attention property to assign an importance score to each image to …

Development Of A Machine Learning Framework For An Irrigation Decision Support System, Eric Wilkening, Derek M. Heeren, Yeyin Shi, Laila A. Puntel, Guillermo R. Balboa, Abia Katimbo, Kuan Zhang, Precious Nneka Amori, Bruno Lena

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Currently used irrigation scheduling techniques often require significant human intervention and are time consuming, particularly for variable rate irrigation. This research aimed to develop a conceptual framework that incorporates disparate data sources leveraging both mechanistic and machine learning (ML) approaches. The overarching objective is to utilize the growing availability of data and technology to manage irrigation more precisely, which will minimize negative impacts of irrigation on our water resources. An initial irrigation machine learning model was proposed and tested in this study as a key component of an edge-cloud computing and federated learning decision-making framework. The specific objectives were (1) …

Comparative Analysis Of Linear And Non-Linear Feature Selection For Breast Cancer Detection With Shap Analysis, Hamza Sabo Maccido

AUIQ Technical Engineering Science

Breast cancer remains one of the leading causes of mortality worldwide, emphasizing the critical need for accurate and efficient diagnostic tools. This study investigates the effectiveness of combining linear and non-linear feature selection methods-Principal Component Analysis (PCA), Pearson Correlation Coefficient (PCC), and Backpropagation Neural Networks (BNN) to improve breast cancer classification using machine learning models. We utilized the Wisconsin Breast Cancer Dataset to evaluate the performance of five classifiers-Support Vector Machine (SVM), K-Nearest Neighbor (KNN), Logistic Regression (LR), Decision Tree (DT), Naïve Bayes (NB) and Artificial Neural Network (ANN). The results demonstrated that BNN-selected features consistently outperformed PCA and PCC …

Predicting Sleep And Sleep Stage In Children Using Actigraphy And Heartrate Via A Long Short-Term Memory Deep Learning Algorithm: A Performance Evaluation, Robert Weaver Med, Phd, James White, Olivia Finnegan, Hongpeng Yang, Zifei Zhong, Keagan Kiely, Catherine Jones, Yan Tong, Srihari Nelakuditi, Rahul Ghosal, David E. Brown, Russell R. Pate Ph.D., Gregory J. Welk, Massimiliano De Zambotti, Yuan Wang, Sarah Burkart, Elizabeth L. Adams Phd, Bridget Armstrong, Michael Beets Med, Mph, Phd

Faculty Publications

Children's ambulatory sleep is commonly measured via actigraphy. However, traditional actigraphy measured sleep (e.g., Sadeh algorithm) struggles to predict wake (i.e., specificity, values typically < 70) and cannot predict sleep stages. Long short-term memory (LSTM) is a machine learning algorithm that may address these deficiencies. This study evaluated the agreement of LSTM sleep estimates from actigraphy and heartrate (HR) data with polysomnography (PSG). Children (N = 238, 5–12 years,52.8% male, 50% Black 31.9% White) participated in an overnight laboratory polysomnography. Participants were referred be-cause of suspected sleep disruptions. Children wore an ActiGraph GT9X accelerometer and two of three consumer wearables(i.e., Apple Watch Series 7, Fitbit Sense, Garmin Vivoactive 4) on their non-dominant wrist during the polysomnogram. LSTM estimated sleep versus wake and sleep stage (wake, not-REM, REM) using raw actigraphy and HR data for each 30-s epoch. Logistic regression and random forest were also estimated as a benchmark for performance with which to compare the LSTM results. A 10-fold cross-validation technique was employed, and confusion matrices were constructed. Sensitivity and specificity were calculated to assess the agreement between research-grade and consumer wearables with the criterion polysomnography. For sleep versus wake classification, LSTM outperformed logistic regression and random forest with accuracy ranging from 94.1to 95.1, sensitivity ranging from 94.9 to 95.9 across different devices, and specificity ranging from 84.5 to 89.6. The addition of HR improved the prediction of sleep stages but not binary sleep versus wake. LSTM is promising for predicting sleep and sleep staging from actigraphy data, and HR may improve sleep stage prediction.

Towards Leveraging Social Media Data For Fostering Collaborations Among Non-Profits, Monazil Chowdhury

LSU Doctoral Dissertations

Nonprofit organizations serve a crucial role in tackling a wide range of significant social, environmental, and economic issues. But it is often hard to get a clear picture of their work because their information is spread out and it is difficult to see how they are collaborating. To address this issue we developed a web-based tool to collect scattered data—from a variety of sources, such as the IRS, social media, and the Census, into one easy-to-use resource. The tool begins by taking IRS records and geocoding each nonprofit’s physical address With its coordinates. It then retrieves census tract information from …

Internet Of Things In Sustainable Agriculture Systems, Ataguba E. Hillary, Ayodeji A. Okubanjo, Nurudeen. S. Lawal, Abisola A. Olayiwola

AUIQ Technical Engineering Science

The agriculture industry has evolved toward intelligent, data-driven processes due to the growing need for food worldwide, environmental sustainability, and effective resource use. A thorough analysis of smart agriculture as a game-changing element of the industry 4.0 revolution is provided in this study, with a focus on the incorporation of Internet of Things (IoT)-based technologies for sustainable farming. To optimize agricultural processes including irrigation, crop health monitoring, climate and weather tracking, animal management, and disease detection, it investigates the functions and uses of smart sensors and IoT devices. The study demonstrates how smart agriculture may meet important issues like food …

Internet Of Things For Sustainable Transportation Systems, Ayodeji Akinsoji Okubanjo, Ignatius Kema Okakwu, Oluyinka Esther Olaifa, Matthew Babatunde Olajide, Olufemi Peter Alao, Olayiwola Abisola

Al-Mustaqbal Journal of Sustainability in Engineering Sciences

This paper highlights the opportunities for the Internet of Things in the transportation industry. The need for the Internet of Things and its architecture to address various complex challenges in the transportation sector are discussed. Various smart applications of the Internet of Things and its noticeable benefits over the existing technology are well articulated. In addition, the role of new and emerging technology such as artificial intelligence, machine learning, big data, cloud, data storage, and analysis for future sustainable transportation are highlighted with specific cases. Furthermore, smart areas of the Internet of Things in transportation are pictorially discussed. In addition, …

Leveraging Machine Learning For Accurate Prediction Of Nba Player Salaries, Ye Cheng, Yan Song, Mingqi Wang

Iraqi Journal for Computer Science and Mathematics

Basketball players in the NBA are renowned for their talent, athleticism, and commitment to the game. NBA players may make enormous sums of money; however, they vary greatly. Rookie agreements begin at a lower price and go up following performance. NBA players’ pays are influenced by several factors. Because they influence games and the success of the club, exceptional players fetch larger compensation. This study employs Machine Learning (ML) techniques, including Lasso Regression and Random Forest Regression (RFR) models to analyze wage trends, enhanced by the Slime Mould Algorithm (SMA) and Artificial Rabbit Optimization (ARO) for accuracy. The goal is …

Machine Learning Techniques For Optimizing The Efficiency And Costs Of Drill Steel In Sandstone And Granodiorite: A Case Study In Peru, Marco Cotrina, Jairo Marquina, Jose Mamani, Solio Arango, Eusebio Antonio, Eduardo Noriega, Teofilo Donaires, Dominga Cano

Journal of Sustainable Mining

This research aims to optimize the efficiency and costs of drilling steel in sandstone and granodiorite rocks using machine learning techniques in a Peruvian mine. Predictive models, including random forest (RF), XGBoost (XGB), decision trees (DT), and artificial neural networks (ANN), were applied, along with optimization algorithms such as genetic algorithm (GA), particle swarm optimization (PSO), ant colony optimization (ACO), and simulated annealing (SA). A dataset of 705 entries was analyzed, focusing on drill bit wear, percussion and rotation pressures, and cost per meter drilled. Model performance was evaluated using R², RMSE, MAE, and MAPE. The ANN model …

Data-Driven Prediction Of Binder Rheological Performance In Rap/Ras-Containing Asphalt Mixtures, Eslam Deef-Allah, Magdy Abdelrahman

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Asphalt recycling technologies have advanced considerably over the last few decades with the utilization of reclaimed asphalt pavements (RAP) and recycled asphalt shingles (RAS). Characterizing aged and heterogeneous binders in these mixtures is challenging, particularly with limited extracted binders. This study suggests a data-driven framework that considers the rheological, chemical, and thermal characteristics to predict the binders' performance. Ninety-seven mixtures with 0–35% of the asphalt binder replaced with RAP/RAS binders were included as cores from the field, plant-produced mixtures, and laboratory-fabricated mixtures. The binders were chemically quantified using aging, aromatic, and aliphatic indices. Thermal analyses of the binders involved the …

Effect Of Vehicular Electrification On Transportation Emissions In Florida, Shreya Sapkota Dhakal

Doctoral Dissertations and Master's Theses

Vehicular emissions from fuel-based passenger cars emit an array of gases and particles that are detrimental for human health and the environment. In that regard, electric vehicles (EVs) present a viable, sustainable solution. This study investigated the impact of electrification of passenger cars on air quality in Florida, in five major urban counties namely Miami-Dade, Duval, Hillsborough, Orange, and Leon. Between 2018 and 2022, these counties experienced a significant increase of 219.50 ± 52.32% in EV adoption, coupled with a 11.55 ± 6.13% decrease in fuel-based vehicle usage. Herein, we characterize five pollutants primarily generated from fuel-based passenger vehicles- carbon …

Adaptive Control Of Air Purification Processes In Industrial Painting Workshops: A Review Of Scientific Literature, N.A Kabulov, Sh. Mamatbekov

Chemical Technology, Control and Management

This article examines modern approaches to adaptive control of air purification processes in industrial facilities, particularly in paint shops for parts coating. The relevance of the study is driven by the need to enhance air purification efficiency, ensure worker safety, and comply with environmental regulations. The paper analyzes adaptive control methods, including the use of neural networks, machine learning, and adaptive control algorithms, which enable real-time optimization of purification systems. Special attention is given to the utilization of sensor data for predicting pollution levels and automatically adjusting purification parameters. The article also discusses the advantages and limitations of implementing adaptive …

Estimating Order Picking Distances Using Machine Learning, Hector J. Carlo, Carlos A. Morel-Figueroa, Victoria Méndez-González, Yamilette Boscio-Sánchez, Alex Demel-Pacheco

International Material Handling Research Colloquium

No abstract provided.

Modeling And Estimation Of Co2 Capture By Porous Liquids Through Machine Learning, Farid Amirkhani, Amir Dashti, Hossein Abedsoltan, Amir H. Mohammadi, John L. Zhou, Ali Altaee

Chemical and Biochemical Engineering Faculty Research & Creative Works

Porous liquids (PLs) are newly developed porous materials that combine unique fluidity with permanent porosity, which exhibit promising functionalities. They have shown ability to efficiently absorb greenhouse gases such as carbon dioxide (CO₂). Experimental measurement is one approach to determining the solubility of various greenhouse gases in PLs, which has drawbacks such as being expensive and time-consuming. Hence, simulation models are valuable to predict the solubility of CO₂ in various PLs. This work aims to develop machine learning (ML) modeling methods for accurately estimating CO₂ solubility under varying conditions (e.g. PLs, temperature, pressure). Adaptive Neuro-Fuzzy Inference …

Intelligent Intrusion Detection In Clustered Wireless Sensor Networks: A Dynamic Clustering And Machine Learning-Based Approach, Abdullah R. Abdulwahhab, Mohd Fadzli Mohd Salleh, Muhammad Firdaus Akb, Mohammed Najm Abdullah

Iraqi Journal for Computer Science and Mathematics

Traditional Intrusion Detection Systems (IDS) designed for more conventional network infrastructures are often ill-equipped to handle the unique challenges WSNs pose, leading to significant gaps in security and resilience. This paper introduces an Intelligent Intrusion Detection System (IIDS) explicitly tailored for clustered WSNs to address these critical challenges. The proposed IIDS integrates dynamic clustering with advanced machine learning algorithms to create a robust and adaptive security solution capable of real-time threat detection and mitigation. The dynamic clustering mechanism is designed to continuously monitor and respond to changes in sensor node network topology and energy levels, ensuring that energy consumption is …