Engineering Commons^™

Roof Material Suitability For It Mission-Critical Facilities, Charles Akira Petrinovich

Theses and Dissertations

Mission-critical facilities house operations that when interrupted, can prove disastrous to an organization’s future. Limited market research is available to determine what roof types are best suited to meet the unique demands of these buildings. The purpose of this research was to evaluate different roof materials and to observe trends relative to their lifecycle costs and roof professional’s assessment in use with mission-critical facilities. The objectives of the study were to determine the average annual lifecycle costs for the sampled roof materials, to determine the roofing professionals’ preferred mission-critical facility roof materials, and to priority rank the sampled roof materials …

Smart Flow Facility Analysis, Chantal Ann George, Pete Suktankar, Eric Wilson, Matthew Geiger

Senior Design Project For Engineers

The SMART Flow Design Team has been tasked in providing a physical layout for a single building facility used to consolidate three separate business units. The objective for the new facility will be to manufacture, receive, ship, and store the company's finished products. When designing the physical layout, the team must take into consideration stable and seasonal business volumes, current and future volume demand growth, designated inbound, outbound, and storage areas, and product turn rates. All specifications must be met while determining an efficient flow of goods. The team has designed indoor and outdoor layouts using Microsoft Visio, performed various …

A Multi-Objective Affinity-Based Savings Algorithm For Improving Processes In Centralized Warehousing Operations, Mckenlee M. Coco

Graduate Theses and Dissertations

Traditional approaches to improving material management processes in warehousing operations tend to focus on one of three major areas: facility design, order picking and sorting, and order batching. In an effort to improve total system savings, a new affinity function is developed and applied to batching logic to create a multi-objective problem. The proposed multi-objective function incorporates user input to increase adaptability to changing demand and flexibility to changing requirements. Computational experience shows the new function leads to solutions that deviate no more than 25% from the most efficient distance based picking route by the same batching logic, while creating …

Subcritical Facility Design, Kacie Breeding

Chancellor’s Honors Program Projects

No abstract provided.

Caregivers Time Utilization Before And After The Introduction Of An Electronic Nursing Documentation System In A Residential Aged Care Facility, Esther Naliaka Munyisia, Ping Yu, David M. Hailey

Faculty of Engineering and Information Sciences - Papers: Part B

No abstract provided.

Energy Spectra Considerations For Synchrotron Radiotherapy Trials On The Id17 Bio-Medical Beamline At The European Synchrotron Radiation Facility, Jeffrey C. Crosbie, Pauline Fournier, Stefan Bartzsch, Mattia Donzelli, Iwan Cornelius, Andrew W. Stevenson, Herwig Requardt, Elke Brauer-Krisch

Faculty of Engineering and Information Sciences - Papers: Part A

The aim of this study was to validate the kilovoltage X-ray energy spectrum on the ID17 beamline at the European Synchrotron Radiation Facility (ESRF). The purpose of such validation was to provide an accurate energy spectrum as the input to a computerized treatment planning system, which will be used in synchrotron microbeam radiotherapy trials at the ESRF. Calculated and measured energy spectra on ID17 have been reported previously but recent additions and safety modifications to the beamline for veterinary trials warranted a fresh investigation. The authors used an established methodology to compare X-ray attenuation measurements in copper sheets (referred to …

Radiation Monitoring In Mixed Environments At Cern: From The Irrad6 Facility To The Lhc Experiments, F Ravotti, M Glaser, Anatoly B. Rosenfeld, Michael L. Lerch, A Holmes-Siedle, G Sarrrabayrouse

Michael L.F. Lerch

RadFET and p-i-n diode semiconductor dosimeters from different manufacturers will be used for radiation monitoring at the Experiments of the CERN LHC accelerator. In this work these sensors were exposed over three months in the CERN-IRRAD6 facility that provides mixed high-energy particles at low rates. The aim was to validate the operation of such sensors in a radiation field where the conditions are close to the ones expected inside full working LHC particle detectors. The results of this long-term irradiation campaign are presented, discussed and compared with measurements by other dosimetric means as well as Monte Carlo simulations. Finally, the …

A Reflective Closed Loop Approach For Implementing A New Authentic Assessment-Based Teaching Facility For Electric Motor And Drive Systems, Craig Mclauchlan, Philip Ciufo, Sarath Perera

Faculty of Engineering and Information Sciences - Papers: Part A

BACKGROUND A new teaching facility with a focus on electric motor and drive systems has been implemented at the University of Wollongong. This facility aspires to use authentic assessment principles to assist in preparing students to properly utilise electric motor and drive systems in professional practice. In an attempt to realise this aim, the implementation of this facility was undertaken using a reflective closedloop approach, addressing the educational outcomes achieved by the students. Setting a holistic scope for the implementation beyond technical concerns to include educational outcomes was critical to the success achieved and has laid the foundation for further …

Radiation Monitoring In Mixed Environments At Cern: From The Irrad6 Facility To The Lhc Experiments, F Ravotti, M Glaser, Anatoly B. Rosenfeld, Michael L. Lerch, A Holmes-Siedle, G Sarrrabayrouse

Anatoly Rozenfeld

RadFET and p-i-n diode semiconductor dosimeters from different manufacturers will be used for radiation monitoring at the Experiments of the CERN LHC accelerator. In this work these sensors were exposed over three months in the CERN-IRRAD6 facility that provides mixed high-energy particles at low rates. The aim was to validate the operation of such sensors in a radiation field where the conditions are close to the ones expected inside full working LHC particle detectors. The results of this long-term irradiation campaign are presented, discussed and compared with measurements by other dosimetric means as well as Monte Carlo simulations. Finally, the …

Hardy Diagnostics Facility Redesign, Jamie W. Lam

Industrial and Manufacturing Engineering

This senior project is a facilities design for the plate production room at Hardy Diagnostics. This project was completed using a systematic layout planning approach. The main reason for this redesign was to consolidate all plate line production into one room. This would ensure better visability for the managers. After the project was defined, the different departments were established and the relationships between those departments were found. The space requirements needed for those departments were then measured out to also include the aisle widths and any machinery or carts needed to complete each function. Having determined all requirements for this …

Facility And Database Design For The Research Development Center, Nicholas J. Mehas

Industrial and Manufacturing Engineering

The purpose of this project is to create a new facility and database design to replace the current Research Development Center located on the campus of California Polytechnic State University San Luis Obispo and the database in use at the facility. Currently the Research Development Center is a condemned building and the database lacks up-to-date technology. The project will develop new designs for both, based on concurrent engineering. The outcome of the project will be a new design for a new building that increases capacity and capability; a new database design that integrates newer technologies and methods for tracking tools.

E.J. Gallo Winery Spirit-Makers Facility, Aaron Pickar

Industrial and Manufacturing Engineering

With growing demand for E.J. Gallo spirit brands, the cramped and cluttered facility allocated to the spirit-makers does not provide an adequate work environment to design and test new hard alcohols. E.J. Gallo Winery wants to relocate the spirit-makers to a new facility located near the brandy production floor for under 200,000 dollars. In order to do this, a revised systematic approach to facility design is used.

In this process, the departments are first defined, then the relationships between these departments and the space requirements are documented. Once these planning steps are complete, alternative layouts are constructed and analyzed until …

Radiation Monitoring In Mixed Environments At Cern: From The Irrad6 Facility To The Lhc Experiments, F Ravotti, M Glaser, Anatoly B. Rosenfeld, Michael L. Lerch, A Holmes-Siedle, G Sarrrabayrouse

Faculty of Engineering - Papers (Archive)

RadFET and p-i-n diode semiconductor dosimeters from different manufacturers will be used for radiation monitoring at the Experiments of the CERN LHC accelerator. In this work these sensors were exposed over three months in the CERN-IRRAD6 facility that provides mixed high-energy particles at low rates. The aim was to validate the operation of such sensors in a radiation field where the conditions are close to the ones expected inside full working LHC particle detectors. The results of this long-term irradiation campaign are presented, discussed and compared with measurements by other dosimetric means as well as Monte Carlo simulations. Finally, the …

Selecting An Air-Cure Tobacco Housing And Curing Facility, George A. Duncan, Larry D. Swetnam

Agricultural Engineering Extension Publications

Once or twice in a lifetime the average tobacco producer faces the decision of what tobacco housing and curing facility he needs to build. For some, this may be to replace a barn that has burned or blown down. For others, the need may arise from an expansion of production by farm acquisition or lease-in of extra poundage.

In all cases, it is important to build the most suitable facility for present and projected production methods. With labor becoming more costly and scarce, labor-saving features are a must Rising material and construction costs continue to increase the initial investment costs …

A New Thz Facility For Condensed Matter Physics, R. A. Lewis, R.E.M. Vickers, M.L. Smith

Faculty of Engineering - Papers (Archive)

This paper describes a new THz facility for condensed matters physics that complements the existing infrastructure at the University of Wollongong (UOW).

Two-Tier Partially Enclosed Air-Cure Tobacco Barn, George A. Duncan

Agricultural Engineering Extension Publications

With the rising costs, scarcity of materials, and greater construction requirements for regular tobacco barns, the concept of a lower cost but functionally sound tobacco curing facility with partial or no sidewall closure has been developed into a blueprint plan shown in Figure 1. The plan can be built and used now with partial sidewalls and enclosed more completely later if desired.

Economic Impacts Of Noxious Facilities: Incorporating The Effects Of Risk Aversion, Leslie A. Nieves

RISK: Health, Safety & Environment (1990-2002)

The author suggests an integrative approach for projecting economic impacts of facilities that elicit public Risk aversion. She incorporates both economic stimulus effects and perception-based effects of facilities on the host area economy. Empirical findings are compared and an impact estimation framework is suggested for integrating psychometric and econometric techniques.