Engineering Commons^™

Camp Ocean Pines Aviary Extension, Matthew R. Stephens

Construction Management

This paper describes the construction process of an additional 192 SF storage area for an existing Nature Center, along with a new 1000 SF deck around the entire structure. The scope of work included the excavation and pouring of concrete piers and stem walls, framing of the subfloor, shear walls, roof, and deck, electrical rough-in and finish, roofing system, windows, doors, insulation, drywall, and decking. All work on this project was managed by the author, and construction was done by the author, subcontractors, local hires, and volunteers. Construction of the project took place between December 2016 and June 2017, and …

Netpoint®, Purdue Ect Team

ECT Fact Sheets Archive

The vast majority of construction scheduling software uses a combination of spreadsheets and Gantt charts for developing and depicting Critical Path Method (CPM) schedules. While this paradigm works for the expert scheduler, it is not conducive to collaboration, and it is prohibitively difficult for non-scheduling experts to understand.

NetPoint® provides a dynamic, visual interface conducive to touch and gestural input. Activities are drawn directly on a time-scale and may be placed on the same row or arranged automatically using codes or the WBS. Such control of the presentation makes it easier to communicate the plan to any type of audience. …

Smartvid.Io, Purdue Ect Team

ECT Fact Sheets Archive

The collection, organization, and retrieval of industrial media is a pervasive challenge that is especially glaring for companies in the AEC industry. Construction projects often generate large volumes of pictures & videos from the field for tracking progress and communicating between engineers, contractors, and subcontractors. It is not uncommon for field personnel to capture hundreds of photos per week on any given jobsite.

Smartvid.io is a cloud-based software solution designed for the specific needs of industrial media. The application’s internal deep-learning engines, collectively nicknamed VINNIE (for ‘Very Intelligent Neural Network for Insight and Evaluation’), use speech and image recognition to …

Hillman Composite Beam (Hcb®), Purdue Ect Team

ECT Fact Sheets Archive

The Hillman-Composite Beam (HCB®), is an innovative structural member for use in highway and railroad bridges as well as marine facilities. The HCB is essentially a lightweight reinforced concrete beam strengthened and protected by a corrosion-resistant and resilient Fiberglass Reinforced Polymer (FRP) shell.

The beam is comprised of three main components, a concrete arch (compression reinforcement), an FRP bottom flange encapsulating steel strands tying the ends of the arch together (tension reinforcement) and the FRP shell. Galvanized Rebar “shear connectors” are used to make the beam composite with the concrete deck in the same manner as pre-stressed concrete beams.

The …

An Analysis Of The Benefits In Estimating At Different Pipe Union Labor Rates, A.J. Chamorro

Construction Management

This paper is an analysis of the costs and benefits of estimating at different union labor rates, based on the location of the project and which jurisdiction the project falls in. The basis of the research is a case study of a Bay Area mechanical contractor (Contractor X) which previously estimated at a single labor rate, and recently developed variable estimating. Through that case study, best practices are developed for union pipe trade estimating. The results of the case study show that estimating protocol should be determined on a project by project basis, and company resources and manpower have to …

Aei Student Design Competition: Texas Tech Sports Performance Facility, Jacob G. Kockrow

Construction Management

The AEI Student Competition is an annual event that pushes students in the disciplines of engineering and construction management to collaborate and demonstrate creative solutions to the challenges presented. This year, the competition is focused on the new Texas Tech Sports Performance Sports Facility located in Lubbock, Texas, where they tore down the existing building and are in the process of completing the new facility. Instead of recreating the plans given, we designed a brand new building to meet the project requirements, which included a $48 million budget and a 34-month construction duration. As the Construction Manager for the project, …

An Operational View In Computational Construction Of Information, Florentin Smarandache, Stefan Vladutescu, Constantin Dima, Valeriu Voinea

Branch Mathematics and Statistics Faculty and Staff Publications

The paper aims to explain the technology of emergence of information. Our research proves that information as communicational product is the result of processing within some operations, actions, mechanisms and strategies of informational material meanings. Are determined eight computational-communicative operations of building information. Information occurs in two communication phases, syncretic and the segregation-synthetic. The syncretic phase consists of four operations: referral of significant field, primary delimitation of information, detection-looking information and an anticipative-draft constitution (feedforward). The segregation-synthetic phase also includes four operations: discrimination, identification, interpretation and confrontation (feedback). In the future we will investigate informational actions, mechanisms and strategies.

A Proposed Method Of Correcting The Construction Entries In The 2006 Philippine Input-Output Table, Albert E. Lamberte, Krista Danielle Yu, Caesar Cororation

Angelo King Institute for Economic and Business Studies (AKI)

The construction of national input-output (IO) tables follows internationally acceptable standards such as the United Nations Systems of National Accounts (UN SNA) and European System of Accounts (ESA). These standards are used to ensure tractability and coherence between country tables. The 2006 Philippine IO table published by the Philippine Statistics Authority (PSA) assumes that the construction sector does not provide any input to the production of output for any economic sector. With the booming infrastructure development in the Philippines, this assumption that intermediate demand for construction output has a value of zero is unreasonable. This study proposes a corrective approach …

Scheduling Strategies For Construction Project Managers Toward On Time Delivery, Paul Shamp

Walden Dissertations and Doctoral Studies

Construction management projects involve complex, dynamic environments resulting in uncertainty and risk, compounded by demanding time constraints. Research indicated project managers have struggled to identify best practices for scheduling construction projects via critical path methodologies while searching for tools to increase timely job completions and budget profits. The purpose of this single case study was to explore the strategies that construction project managers used to manage scheduled construction project delivery on time. The constructivist philosophical worldview was used as the framework for this study. Data were collected from semistructured interviews from 7 project managers from 5 different construction companies selected …

Kihefo Vocational Center: Kabale, Uganda, Jason Matthew Angerer

Construction Management

Journeyman International (JI) is a non-profit organization which acts as a platform for bringing together volunteer Architects, Designers, Engineers, and Construction Managers with humanitarian projects around the world. Kigezi Healthcare Foundation (KIHEFO) a non-profit NGO located in Kabale, Uganda is a client seeking to build a vocational center to educate the workforce of Uganda. The center will include multi-purpose class rooms, a dining hall, rabbit farm, carpentry shop, and living complex. The Architect on the project was Courtney Wedel from Cal Poly. As the Construction Manager on the project my responsibilities include; Design Assist, Feasibility Analysis, Scheduling, Estimating, and Managing …

Multimedia Techniques For Construction Education And Training, Wayne A. Bunnell

Open Access Theses

The current profession of civil engineering often focuses education and training on code compliance rather than constructability and construction techniques. Also, it is well accepted that it takes a decade or more for engineers to develop a high-level project construction understanding and many state departments of transportation rely on in-field training for entry-level inspectors, with little or no education provisions for contractors. This research investigated the use of time-lapse photography to develop training and education material that will improve the understanding of project construction and crucial quality control specifications of an entry-level engineer, contractor, or inspector. Overall, the project team …

Factors Affecting Social Sustainability In Highway Projects In Missouri, Mohamed Abdel-Raheem, Charles Ramsbottom

Civil Engineering Faculty Publications

Sustainability focuses on the interaction between a given project and the social, environmental, and the economic dimensions of the system enclosing it. The majority of the studies conducted focused mostly on the environmental aspects of sustainability rather than the economic ones, while very few studies discussed the social dimension. Social sustainability promotes the concepts of respect, awareness, diversity, vitality, and responsibility toward the workforce and the society by keeping them healthy and safe from harm during the different phases of a project. Highway projects are one of the most critical infrastructure projects in the construction industry. This is due to …

Portable Modular Conveyor, Purdue Ect Team

ECT Fact Sheets Archive

The Portable Modular Conveyor-Material Placer (PMC) is a quick, easy, dependable and cost effective way to place materials in the limits of the confined grade or work area. This specialized piece of equipment was developed to place concrete in front of a concrete slip form-paving machine. The typical method of placing concrete requires a self-propelled belt placer, which is very expensive to purchase and mobilize to the jobsite. The PMC creates a significant cost savings in labor and equipment with the PMC. It is a direct replacement for conventional material placing equipment, including all in grade belt placing machines. As …

Energy Performance Of A Solar Home Constructed For The Solar Decathlon Competition 2013, Pramen Shrestha, S Mulepati

Civil and Environmental Engineering and Construction Faculty Research

Reduction of energy consumption in residential homes is a goal of sustainable construction. The U.S. Department of Energy (DOE) started a biennial Solar Decathlon competition in 2002, in which the students from universities around the globe built energy-efficient and affordable homes suitable for their climate and location. The main goal of this competition was to select the home best designed and built in a sustainable way. This paper describes the home designed and constructed for participation in the 2012-2013 competition by the students at the University of Nevada, Las Vegas. The home was designed for the desert climate of southern …

Sustainable Architecture Design: Environmental And Economic Benefits, Michael Babcock

Senior Honors Theses

This thesis examines the movement of environmentalism, and its impact on architecture and construction. During an interview with a professional architect, a basis for research of sustainable design was devised, when he explained that “good” architecture attempts to holistically integrate the external and built environment. Presently, the main measurement for sustainability is energy efficiency. Therefore, architects constantly implement new technology in an attempt to unify both the external and built environment in an energy efficient manner. Furthermore, this thesis provides an environmental and financial cost analysis of implementing sustainable design and build. Research shows that the life cycle and up-front …

Mining Big Data To Create A Tool For Empirical Observation Of Continuous Safety Improvement In A Construction Company - A Progressive Case Study In The Lean Environment, Nicolas J. Michuda

Open Access Theses

In any iterative process, without a system of measurement, controlled improvement cannot be recorded. This is especially true in the construction industry, where error occurs, often with fatal repercussions. As part of a process to facilitate the establishment of this metric, an entirely new application was created. The goal of this application is to measure the causal factors that lead to incidents, which will allow the user and administration to track the circumstances and types of incidents. This enables the company to focus on these problem areas and improve through training. By analyzing these incident trends over time, the company …

Measuring Organizational Learning Success In Commercial Construction During Economic Recession, Evan Danforth, Justin Weidman, Clifton Farnsworth

The Professional Constructor

The method through which organizations collect and internalize knowledge, termed organizational learning, has been theorized to significantly influence company performance. Specifically, the speed and accuracy of knowledge transfer boasted by organizational learning proponents is thought to assist companies in dealing with, and even benefiting from, environmental changes such as economic volatility. This research studied the organizational learning of fifteen commercial construction companies in the southwestern United States during the 2008-2009 U.S. recession through semi-structured interviews. It was found that the companies that exhibited dramatically higher or lower levels of organizational learning generally experienced correspondingly higher or lower performance. The contribution …

Factors Of Employee Loyalty Among Construction Management Field Personnel, Estimators & Bim/Design Specialists: Insights For General Contractors, Colby Humphrey, Ben F. Bigelow

The Professional Constructor

Since 2008 construction employment has dropped considerably and has remained below 2007 levels, with construction management positions still about 14% down (U.S. Department of Labor 2015). Despite the boom currently occurring in the construction industry, general contractors (GCs) are finding it difficult to fill project management positions (AGC 2014), and construction firms expect these challenges to continue (Mutikani 2014). With greater demand for managers, retaining quality people is a paramount concern. Everyone knows the adage that “money talks”, but what can a GC do to engender loyalty besides just paying more? To explore that question and attempt to better understand …

Analysis And Management Of The Price Volatility In The Construction Industry, Alireza Joukar

LSU Doctoral Dissertations

The problem of price volatility as it pertains to material and labor is a major source of risk and financial distress for all the participants in the construction industry. The overarching goal of this dissertation is to address this problem from both viewpoints of risk analysis and risk management. This dissertation offers three independent papers addressing this goal. In the first paper using the Engineering News Record Construction Cost Index (ENR CCI), a predictive model is developed. The model uses General Autoregressive Conditional Heteroscedastic (GARCH) approach which facilitates both forecasting of the future values of the CCI, and capturing and …

Use Of Personality Profile Assessments In The Construction Industry, Brian Richard Childs

Theses and Dissertations

Various industries are using personality profile assessments as tools to help reduce employee turnover. Employee turnover is a continuing challenge in the construction industry that has negative effects on construction companies. Research found that it was difficult to know if companies in the construction industry are using personality profile assessments as a tool to help reduce employee turnover. After understanding that other industries were using personality profile assessments in their hiring, promoting, team building and leadership development to reduce turnover, it was desired to understand if the construction industry was doing the same. This research performed a survey among the …

Accident Patterns In Road Construction Work Zones, Tariq Shehab, Leah Phu

The Professional Constructor

Traffic safety in road construction zones has always been a major concern for engineering practitioners, departments of transportation, law enforcement professionals, researchers and many others. Due to the deteriorated condition of road and underground infrastructure facilities in the United States, the number of rehabilitation projects and their associated traffic accidents have increased over the past few years. To perform the needed road and underground utility rehabilitation activities in safer environments, researchers need to understand the causes behind these accidents. Although many researchers have been exploring the safety of many construction activities, research pertaining to road construction projects is lacking and …

A Framework For Small-Scale Construction Projects By Ngos In Developing Countries, James D. Goedert, Bradley Cory

The Professional Constructor

This paper outlines a theoretical framework for NGOs who are building small-scale construction projects in developing countries. The framework is a step-by-step procedure to guide NGOs from developing project parameters at the start of the project with the partner to a locally controlled sustainable project closeout. The authors used the integrative project delivery approach along with past construction research models and personal experience to guide the development of the framework. Steps within the framework are illustrated using five projects from three countries. This work assumes that the ultimate objective of the project is local operational sustainability with the NGO’s presence …

Vertical Icf Wall System, Purdue Ect Team

ECT Fact Sheets Archive

Traditional ICF systems’ installation is tedious and labor intensive resulting in out of level, bowing, and snaking walls with a significant amount of bracing adding to the cost. ICF (Insulated Concrete Form) walls are a form of structural walls used for construction. Hobbs Vertical ICF system uses less concrete, more recycled material and requires less labor for construction. The furring assemblies and retainer clips of the Hobbs VICF system are made from 100% recycled post-industrial waste.

Prefabricated Building, Purdue Ect Team

ECT Fact Sheets Archive

With the continuous demand for construction of new buildings, an easier, more sustainable, energy-efficient and environmentally friendly building method is necessary to save time, energy and cost. Hence, there has been an increasing need for a system such as BROAD sustainable building (BSB). A form of prefabricated building by BROAD Sustainable Building Co., LTD (BSB). It consists of flooring and ceiling, embedded shafts of ventilation, water supply & drainage, electricity and lighting. Other items include pillars, diagonal bracings, doors, windows, walls and sanitary wares, air conditioning, air quality products, lifts, building thermal insulations.

Post-Tensioned Concrete Shear Wall, Purdue Ect Team

ECT Fact Sheets Archive

The post-tension concrete shear wall by Tipping Mar will replace the conventional concrete shear wall in earthquake prone areas in many instances, depending on the height and scale of the building.

Ap Alternatives Modular Solar Racking, Purdue Ect Team

ECT Fact Sheets Archive

Solar panels have been used to generate and supply electricity in various applications such as residential and commercial buildings. Therefore, a need for a quicker approach to installation as well as the need to reduce workmanship to speed up the process is needed. Solar racks are developed through the use of automated equipment to “preassemble the racking hardware, pre-install the solar modules, and drive helical anchors into the ground rapidly”. So instead of installing one panel at a time, AP Alternatives has created a new method that uses machines to make the process easier. This new automation of the installation …

3d Printing For Bricks, Purdue Ect Team

ECT Fact Sheets Archive

Building Bytes, by Brian Peters, is a project that uses desktop 3D printers to print bricks for architecture. Instead of using an expensive custom-made printer, it uses a normal standard 3D printer which is available for everyone and makes it more accessible and also easier for fabrication.

The Dc House Project: Electrical System Design & Construction, John Bradley

Electrical Engineering

This project entails the design and assembly of the photovoltaic system, switchboard panel enclosure, and battery enclosure for the DC House’s main electrical system. The intended purpose of this project is to provide the electrical framework necessary for future students to easily modify and add to this rendition of the DC House. The principle design implements a variety of renewable energy sources, however this senior project only uses solar power in order to maintain a manageable scope. Each of these renewable energy sources are stepped down to a voltage of 24V and input to a Multi Input Single Output DC …

Successful Paths To Becoming A Lean Organization In The Construction Industry, Robert D. Warcup

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Lean construction is defined as the continuous process of eliminating waste, with the goal of increasing value on construction projects to the owner and to all stakeholders of a project. It has gained considerable momentum since the early 2000s because of its potential for problem-solving and increased productivity, especially as many construction firms still struggle to adapt to an ever-changing industry. This study was designed to assist construction companies, especially company executives and managers, to better understand the requirements of a lean transformation by describing the paths of three highly successful lean construction firms from the U.S.

Nine lean advocates, …

State Of Accelerated Bridge Construction (Abc) In The United States, Mike Ofili

Honors College Theses

The purpose of this project is to develop a toolkit for the design and construction of bridges using prefabricated materials primarily to reduce the closure time and on-site construction time of newly constructed bridges or bridges undergoing renovation. The research focuses specifically on short span bridges in Georgia (40,60,80, and 120ft spans).

Areas of primary concern for this project were design, constructability, structural analysis, the use of concrete and steel girders, cost efficiency, and industry surveys. In this particular portion of the study, the surveys proved to be most effective when combined with information obtained existing research as well as …