Engineering Commons^™

Sustainable Concrete And Its Current Stance In The Construction Industry, Morgan Hailey Gawle

Construction Management

Concrete is currently the second most consumed resource used in the world and the production of this material, mainly the production of cement, contributes to a little over 8% of carbon dioxide emissions globally. The concept of sustainable concrete is rapidly surfacing within the construction industry as environmental issues and concerns like global warming and climate change continue to worsen. Scientists have been and continue to consistently conduct studies to test if sustainable concrete is a possible solution to reducing carbon dioxide and greenhouse gas emissions that come straight from the construction industry. But some construction companies have concerns that …

Cvaf: Service Dog Kennel Construction, Luke A. Terrio, Spencer Allen

Construction Management

The California Veterans Assistance Foundation Service Dog Kennel Construction project gave back to our country’s veterans by constructing new kennels for their service dogs. The previous kennel on the veteran residential site needed an upgrade due to the increased number of service dogs at the shelter. A team of two Cal Poly Construction Management students consisting of Spencer Allen and Luke Terrio worked to design, estimate, coordinate, and construct a new kennel structure for the site. The roles were divided in the project between the preconstruction and construction phases. During pre-construction Spencer’s role was to schedule the job and create …

Cvaf: Service Dog Kennel Construction, Spencer G. Allen

Construction Management

The California Veterans Assistance Foundation Service Dog Kennel Construction gave back to our country’s veterans by constructing new kennels for their service dogs. The previous kennel on the veteran residential site needed an upgrade due to the increased number of service dogs at the shelter. A team of two Cal Poly Construction Management students consisting of Spencer Allen and Luke Terrio worked to design, estimate, coordinate, and construct a new kennel structure for the site. The roles were divided on the project between the preconstruction and construction phases. During preconstruction Spencer’s role was to schedule the job and create the …

Assessing The Effectiveness Of Problem-Based Learning Across Two Concrete Construction Courses, Anthony Torres, Jiong Hu, Vedaraman Sriraman, Araceli Martínez-Ortiz, Jorge Membrillo-Hernández

Department of Civil and Environmental Engineering: Faculty Publications

The goal of this study is to assess the effectiveness of a Problem-Based Learning (PBL) pedagogy that was implemented in two different concrete construction courses. Both courses are a part of an industry focused four-year undergraduate concrete degree program. One of the classes focused on concrete problems, diagnosis, and repair of existing concrete, while the other class focused on handling and management methods of various concrete mixtures. In both courses, a PBL pedagogy was implemented such that students were self-learning and discovering the knowledge through an action-research case study. The action-research case study was specific to the course outcomes relevant …

Evaluating The Effects Of Curing Methods On Bcsa Cement Concrete, Hannah Allen

Civil Engineering Undergraduate Honors Theses

BCSA cement is a type of cement that makes concrete set up much quicker than typical portland cement concrete. BCSA cement concrete also has a much higher compressive strength than that of portland cement concrete. This study was conducted to determine the effect of different curing conditions on the compressive strength of BCSA cement concrete.

Optimizing The Self-Healing Efficiency Of Hydrogel Encapsulated Bacteria In Concrete, Ricardo Hungria

LSU Master's Theses

Calcium carbonate precipitation through microbial means is a promising pathway for concrete self-healing technologies, mainly for its microcrack sealing attributes. The main goal of this project was to study and optimize the crack healing efficiency of hydrogel encapsulated bacteria in concrete. To achieve this purpose, Bacillus pseudiformus was implemented as the bacteria strain at a concentration of 10⁸ cells/ml. This bacterium strain along with yeast extract was combined along with three different mineral precursors corresponding to magnesium acetate, calcium lactate, and sodium lactate. All these three precursors were evaluated at two concentrations (67.76 mM/l and 75 mM/l). For each …

Pumping Of Concrete: Understanding A Common Placement Method With Lots Of Challenges, Dimitri Feys, Geert De Schutter, Shirin Fataei, Nicos S. Martys, Viktor Mechtcherine

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Several million cubic meters of concrete are pumped daily, as this technique permits fast concrete placement. Fundamental research has been performed and practical guidelines have been developed to increase the knowledge of concrete behavior in pipes. However, the pumping process and concrete behavior are not fully understood. This paper gives an overview of the current knowledge of concrete pumping. At first, the known physics governing the flow of concrete in pipes are introduced. A series of experimental techniques characterizing concrete flow behavior near a smooth wall to predict pressure-flow rate relationships are discussed, followed by recent developments in the use …

Persistence And Mitigation Of Pfas Within Concrete Stormwater Drainage Infrastructure, Jason R. Mcdonald

Theses and Dissertations

The persistence, fate, and transport of per- and poly-fluoroalkyl substances, which have been shown to have adverse effects on human health, have been previously studied in environmental media such as soils and groundwater. This study investigates concrete, a medium that is rarely studied but frequently present in instances where PFAS originating from AFFF releases and spills have occurred. Used heavily throughout aviation firefighting, AFFF poses environmental hazards due to the length of PFAS degradation and toxicological implications, thus its classification as a forever chemical. From the very limited reports to date, studies have suggested very slow release from concrete, potentially …

Applications Of Stretching Technique And Time Window Effects On Ultrasonic Velocity Monitoring In Concrete, Bibo Zhong, Jinying Zhu

Department of Civil and Environmental Engineering: Faculty Publications

Coda wave interferometry (CWI) has been used to measure the relative wave-velocity change (dV/V) caused by small changes in materials. This study uses the stretching processing technique which has been used for CWI analysis to investigate velocity changes of direct longitudinal (P) wave, direct shear (S) wave, and coda wave in concrete by choosing different time windows of ultrasonic signals. It is found that the obtained wave-velocity change depends on the time window position, because the relative contribution of P wave and S wave is different in each signal window. This paper presents three experimental scenarios of velocity …

Thermal Testing And Simulation Of Lunar And Martian Isru-Based Materials, Andres Campbell

All Undergraduate Theses and Capstone Projects

Upon the eventual return of humans to the lunar surface, leveraging local resources to construct landing pads and other infrastructure is an essential component to minimize cost and risk. The inability to accurately model landing and launch scenarios to predict damage to lunar structures poses risks to astronaut and equipment safety. The following experiment is an investigation of using simulation software and temperature sensors to model lunar and Martian regolith simulant-based concrete exposed to thermal loads. The basis of this experiment is built upon standards defined by the American Society for Testing and Materials, the fundamental axioms of structural health …

Strain And Temperature Measurement From Distributed Fiber Optic Sensors In Performance-Based Fire Engineering, Yanping Zhu

Doctoral Dissertations

"Strain and temperature measurement of steel and concrete structures under fires is critical to the understanding of structural performance yet historically challenging due to a significant gap in measurement science. This Ph.D. study characterizes in six parts low-cost distributed fiber optic sensors and applies them to strain, and temperature measurements based on Rayleigh and Brillouin light scattering. The first part aims to quantify the Rayleigh scattering based measurement accuracy of distributed fiber optic sensors under a heating-holding load protocol and characterize the effect of polymer coating on the sensors as the polymer softens and melts at elevated temperatures. The second …

Austenitic, Duplex, And Lean Duplex Stainless Steel Critical Pitting Temperature In Simulated Concrete Environment, Bobby Giebel

Williams Honors College, Honors Research Projects

In this work, the critical pitting temperature (CPT) will be observed for a selection of austenitic (316LN and 24100) and duplex (2205), and lean duplex (2304, 2001) stainless steels in simulated concrete pore solution. To study the influence of temperature on the pitting stability of the stainless steels, three temperatures were tested: 25oC, 45oC, and 65oC for cyclic potentiodynamic polarization (CPP) and electrochemical impedance spectroscopy (EIS). Electrochemical properties of the interfaces we studied via EIS analysis. Kinetics were studied via CPP testing. To reveal the critical pitting temperature of the stainless steels, cyclic thermammetry was used. Characterization of the pits …

A Comparison Of Common Structural Materials, Molly Green

Williams Honors College, Honors Research Projects

This report will compare structural steel, concrete, and lumber through the lenses of mechanical properties, design process, cost, and environmental impact. Steel is a versatile, strong, and lightweight material that comes at a premium price – both financially and environmentally. It is the most expensive material of the three included in this report. This is largely due to its complex manufacturing process that is also responsible for a significant amount of the world’s carbon dioxide emissions. Concrete is significantly less expensive than steel, but the carbon dioxide emissions from manufacturing are approximately equal. Concrete also only performs well in compression …

New Type Of Lightweight Aggregate For Use In Structural Concrete, Jamal Khatib, Ali Jahami, Oussama Baalbaki, Adel Elkordi

BAU Journal - Science and Technology

This research studied the utilization of municipal solid waste incineration bottom ash (MSWI-BA) in lightweight coarse aggregate (LWC) production. A special method was followed to prepare the new aggregate to fully replace the normal aggregates (NWA) in concrete. The mechanical properties such as compressive strength, tensile strength, and elasticity modulus were investigated for the LWC concrete. Then, two beams were prepared; one from LWC and the other from NWC. The structural performance of beams made up of lightweight aggregates compared to normal aggregates was investigated. The results showed that this type of aggregates led to a 20% reduction in concrete …

Uncertainty Of The Ultrasonic Method For Determining The Strength Of Concrete, Ortagoli Sharipovich Hakimov, Zamira Khudoyberdiyevna Ernazarova

Chemical Technology, Control and Management

The issues of measuring the strength of concrete by the method of surface sounding by ultrasound are considered. A measurement model and formulas for estimating the total standard measurement uncertainty, information about the standards used, measurement tools and methods, and environmental parameters are given. Information about the estimation of uncertainty in the form of "eight steps", such as: measurement task; mathematical model of measurement; analysis of input values; observation results; correlations; uncertainty budget; expanded uncertainty; measurement result. It has been established that the uncertainty of type B of the ultrasonic method for determining the strength of concrete is much less …

The Development Of A Finite Element Model For Ballistic Impact Predictions, Richard Allen Perkins

Theses and Dissertations

Concrete is a widely used product and is an important application throughout industry due to its inexpensive cost and wide range of applications. This work focuses on understanding the behavior of high strength concrete in high strain rate ballistic impact loading scenarios. A finite element analysis was created with the implementation of the Concrete Damage and Plasticity Model 2 (CDPM2) to represent the material behavior. The model’s parameters were calibrated to existing literature and the results were analyzed by a comparison of the impact velocity to residual velocity and a qualitative assessment of the impact crater. The model captured the …

An Investigation Of The Flexural Strength And Toughness Of Hybrid Plain And Fiber Reinforced Concrete For Pavement Applications, Wesley Keys

Graduate Theses and Dissertations

For decades, many solutions have been evaluated to combat cracking in concrete pavements. The study presented in this paper evaluates and compares the flexural performance under a third point loading configuration of plain concrete (PC) beams, fully fiber reinforced concrete (FRC) beams, and hybrid PC and FRC beams, with a top PC and bottom FRC layer. The purpose of this hybrid approach was to provide FRC in only half the section, saving cost, while providing a PC surface layer that is easier to finish. All PC top layers were applied at an age of 7-days, considered a reasonable time for …

Shear Strength Of Concrete Beams Made With Belitic Calcium Sulfoaluminate Cement, Caleb W. Chesnut

Graduate Theses and Dissertations

The need for a cleaner alternative to portland cement (PC) concrete has led to increasing interest in alternatives to PC. Structural properties of most of these alternative cements are still an open research topic. One promising alternative cement is belitic calcium sulfoaluminate (BCSA) cement. The study presented in this paper investigated the shear strength, long term compressive strength, and carbonation in BCSA cement and PC concrete beams. A total of twelve eight-foot long beams were made; eight BCSA cement concrete beams and four PC concrete beams to be tested at various ages depending on cement type. Two beams of each …

Field Implementation And Monitoring Of An Ultra-High Performance Concrete Bridge Deck Overlay, Craig Newtson, Brad Weldon, William Toledo, Andres Alvarez, Mark Manning

Data

This project focused on field implementation of an ultra-high performance concrete (UHPC) overlay during rehabilitation of an existing concrete bridge (No. 7032) deck in Socorro, New Mexico, USA. Bridge 7032 is a two-lane bridge that is approximately 300 ft. (91.4 m) long and 54 ft. (16.5 m) in width. Rehabilitation of bridge 7032 included removal of deteriorated concrete from the existing deck, installation of a high-performance deck (HPD) leveling course, and installation of a 1 in. (25 mm) UHPC overlay. An UHPC mixture with a 19.5 ksi (134 MPa) compressive strength developed in previous research was selected for this project. …

Field Implementation And Monitoring Of An Ultra-High Performance Concrete Bridge Deck Overlay, Craig Newtson, Brad Weldon, William Toledo, Andres Alvarez, Mark Manning

Publications

This project focused on field implementation of an ultra-high performance concrete (UHPC) overlay during rehabilitation of an existing concrete bridge (No. 7032) deck in Socorro, New Mexico, USA. Bridge 7032 is a two-lane bridge that is approximately 300 ft. (91.4 m) long and 54 ft. (16.5 m) in width. Rehabilitation of bridge 7032 included removal of deteriorated concrete from the existing deck, installation of a high-performance deck (HPD) leveling course, and installation of a 1 in. (25 mm) UHPC overlay. An UHPC mixture with a 19.5 ksi (134 MPa) compressive strength developed in previous research was selected for this project. …

Measuring Foundation Course Modulus Using Falling Weight Deflectometer, Light Weight Deflectometer, And Dynamic Cone Penetration, Bruce Barrett, Kellie Troxel, Brady Dresselhaus, David Hansen

Nebraska Department of Transportation: Research Reports

Phase I results showed that FWD, LWD, and DCP provided valid results and trended with each other at the stations all three tests were run. This gives confidence that any test method is reliable when used on an exposed bituminous foundation course.

The results of Phase I and Phase II indicate that using FWD testing after concrete is built does not provide an accurate modulus of the foundation course. As demonstrated through the statistical analysis, foundation course moduli cannot be reliably calculated by using FWD on top of doweled concrete pavements and back-calculated using Darwin software or ME Design. Additionally, …

San Luis Obispo Botanical Garden Amphitheater Benches - The Design, Devon Barthmaier

Construction Management

This paper will outline the process of designing, building, and installing ten concrete benches at the San Luis Obispo Botanical Gardens with an emphasis on the design phase. The San Luis Obispo Botanical Gardens is home to an amphitheater that is used for event spaces. The goal of the project was to create a design to seat approximately forty people facing the stage. The project group consisted of six students broken into two teams, a pre-construction team and a construction team. The preconstruction team focused on designing the benches and procuring the materials while the construction team focused on the …

Caed Support Shop Concrete Slab, Nathan Horst, Steven Zheng

Construction Management

This senior project paper will explore the history, background, process, and challenges encountered while constructing a dream project for the Cal Poly CAED Support Shop during the Summer of 2021. From the initial site survey, through the design and permitting process and the physical construction, this project truly encapsulated the “learn-by-doing” philosophy. The project was successful in constructing a final product that enables ADA wheelchair access, creates more useable project work area, as well as addresses drainage issues and provides underground electrical conduits for future electrical upgrades.

Application Of Biochar As Beneficial Additive In Concrete, Temirlan Barissov

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Biochar is a high-carbon solid material produced via thermal decomposition of organic biomass in a low-oxygen environment. Characterized with high water retention properties and high alkalinity, biochar is generally used for soil amendment and fertilization purposes. This study is intended to explore the feasibility of using biochar as a beneficial additive of the most used manmade material, concrete. Literature review revealed several studies where biochar was successfully implemented as an additive in concrete. The beneficial influence of biochar on the mechanical characteristics of concrete is based on nucleation and densification effects. However, the internal microstructure, porosity and chemical composition of …

Durability Of Concrete Produced With Alternative Supplementary Cementitious Material, Craig Newtson, Brad Weldon, Judit Garcia, Seyedsaleh Mousavinezhad, William Toledo

Data

Historically, Class F fly ash has been chosen as a supplementary cementitious material (SCM) in concrete for its ability to mitigate alkali-silica reaction (ASR). However, future availability of fly ash is uncertain because the energy industry has been investing in renewable energy production and removing coal burning generating stations from operation. Consequently, there is a growing need to find new, cost effective and environmentally friendly alternatives to fly ash. This study investigated a locally available natural pozzolan mined from a pumicite deposit near Espanola, NM for its ability to mediate ASR. Concrete and mortar mixtures included SCM contents ranging from …

Assessment Of Deteriorated Structural Concrete To Provide Durable Repairs, Theodore Hopwood, Christopher Goff, Sudhir Palle

Kentucky Transportation Center Research Report

Most of the structural elements on Kentucky bridges are made of reinforced concrete. Many of these elements deteriorate as a result of corrosion of the reinforcing steel caused by carbonation and — primarily — applications of chlorides by the Kentucky Transportation Cabinet (KYTC). Corrosion of reinforcing steel is reviewed along with assessment procedures that leverage nondestructive evaluation (NDE) methods and related laboratory and field tests. Several maintenance procedures are discussed, including the application of sealers and coatings, patch and major concrete repairs, and electrochemical methods. Incorporating NDE and test results into maintenance procedure selection is discussed. Recommendations are provided on …

Impact Of Exposure On Thin Epoxy Overlay Performance, Abul Fazal Mazumder

Dissertations

Thin epoxy overlays are used for improving the condition and extending the service life of bridge decks. The tensile bond pull-off strength, evaluated as per the ASTM C1583, is used as the performance indicator. A failure in the substrate with a tensile strength of 250 psi or greater is considered acceptable. However, the performance evaluated on in-service bridge decks shows inconsistent results. Laboratory studies by several researchers documented a distinct performance difference when the overlays are exposed to room temperatures in comparison to elevated temperatures. However, the most influential parameters such as concrete surface profile, thermal compatibility between overlay and …

Durability Of Concrete Produced With Alternative Supplementary Cementitious Material, Craig Newtson, Brad Weldon, Judit Garcia, Seyedsaleh Mousavinezhad, William Toledo

Publications

Historically, Class F fly ash has been chosen as a supplementary cementitious material (SCM) in concrete for its ability to mitigate alkali-silica reaction (ASR). However, future availability of fly ash is uncertain because the energy industry has been investing in renewable energy production and removing coal burning generating stations from operation. Consequently, there is a growing need to find new, cost effective and environmentally friendly alternatives to fly ash. This study investigated a locally available natural pozzolan mined from a pumicite deposit near Espanola, NM for its ability to mediate ASR. Concrete and mortar mixtures included SCM contents ranging from …

Development Of Novel Ultra-High Performance Engineered Cementitious Composites (Uhp-Ecc) For Durable And Resilient Transportation Infrastructure, Gabriel A. Arce, Marwa Hassan, Daniel E. Game

Data

The objective of this study was to develop novel UHP-ECC materials utilizing readily available ingredients in Region 6 for the construction and repair of transportation infrastructure. Phase one of this study focused on the development of ultra-high strength cementitious matrices by evaluating the effects of ingredient selection and mixture proportioning on the materials’ compressive strength. Variables evaluated included the mass ratios of silica fume to fly ash (SF/FA), supplementary cementitious materials to cement (SCMs/C), and ordinary sand to microsilica sand (OS/MS). Phase two of the study focused on the development of UHP-ECC materials. To this end, based on the knowledge …

Development Of Novel Ultra-High Performance Engineered Cementitious Composites (Uhp-Ecc) For Durable And Resilient Transportation Infrastructure, Gabriel A. Arce, Marwa Hassan, Daniel E. Game

Publications

The objective of this study was to develop novel UHP-ECC materials utilizing readily available ingredients in Region 6 for the construction and repair of transportation infrastructure. Phase one of this study focused on the development of ultra-high strength cementitious matrices by evaluating the effects of ingredient selection and mixture proportioning on the materials’ compressive strength. Variables evaluated included the mass ratios of silica fume to fly ash (SF/FA), supplementary cementitious materials to cement (SCMs/C), and ordinary sand to microsilica sand (OS/MS). Phase two of the study focused on the development of UHP-ECC materials. To this end, based on the knowledge …