Engineering Commons^™

Evaluating A Measure-Calculate Method For Determining Sediment Oxygen Demand In Lakes, Adrian Beirise

Graduate Theses and Dissertations

A steady-state mass diffusion model used with simple measurable and calculable inputs for determining sediment oxygen demand (SOD) is compared to an intact core incubation (ICI) SOD method using samples from three lakes. The mass diffusion model coupled with inputs is known as the measure-calculate method (M-C) and is a potential alternative to existing methods for measuring SOD which are more complex, time-consuming, and costly. The M-C method requires inputs for volumetric sediment oxygen uptake (Ṅsed), sediment density and porosity, and water properties. Ṅsed was determined by suspending sediment in oxygen-saturated water with a DO probe and determining the steady …

Study Of Plasmonic Properties Of The Gold Nanorods In The Visible To Near Infrared Light Regime, Pijush Kanti Ghosh

Graduate Theses and Dissertations

Nanostructures of noble metals show unique plasmonic behavior in the visible to near-infrared light range. Gold nanostructures exhibit a particularly strong plasmonic response for these wavelengths of light. In this study we have investigated optical enhancement and absorption of gold nanorods with different thickness using finite element method simulations. This study reports on the resonance wavelength of the sharp-corner and round-corner rectangles of constant length 100 nm and width 60 nm. The result shows that resonance wavelength depends on the polarization of the incident light; there also exists a strong dependence of the optical enhancement and absorption on the thickness …

Electrodeionization Versus Electrodialysis: A Clean-Up Of Produced Water In Hydraulic Fracturing, Brigitte Marie Rodgers

Graduate Theses and Dissertations

Electrodeionization (EDI) is a widely studied process ranging from applications in wastewater clean-up in the food and beverage industry to purifying organic compounds. To date, there are no apparent studies on applying this technology to produced wastewater recovered from hydraulic fracking sites. Water consumption within hydraulic fracturing sites can reach in the upwards of millions of gallons per site, so a need for a water recycling process becomes necessary within areas where water requirements are scarce. Implementation of an EDI module that is capable of handling high salt solutions from produced wastewater in subsequent fracturing practices will decrease overall water …

Initial Structural Subsidence As Reflected In Morrowan And Atokan (Pennsylvanian) Subsurface Stratigraphy, Northern Arkoma Basin, North-Central Arkansas, Fatimah Taher Nahi Al Asadi

Graduate Theses and Dissertations

The Arkoma Basin is a carboniferous foreland basin that is known for its prolific gas production. The objective of this research is to study the initial subsidence of the basin by analyzing the strati-graphic and structural features of the study area. This was accomplished through IHS Petra, Surf-er 13, and Win-Tensor software. Field work studies comprised a large part of this study. Also, a seismic profile and Google earth elevation profiles are among the methods used to study the initial subsidence of the Arkoma Basin. The study area within the basin represents a transitional zone from the shelf into the …

Biocompatible Microchannel Scaffold With Microwires For Recording Regenerative Peripheral Nerve Neural Spikes, Manisankar Chennamsetti

Theses and Dissertations

A new process for the fabrication of a microchannel scaffold with microwires for peripheral nerve applications is presented. This microchannel scaffold implemented between the ends of nerves, the axons of which regenerate through microchannel in scaffold and fixed microelectrodes. This device is entirely handcrafted using commercially available materials such as microwires, PDMS film, liquid PDMS, dental cement, and epoxy glue. This device was implemented in the a Lewis rat sciatic nerve to better analyze the electrical signals of regenerated axons. 64-electrode microchannel scaffolds were developed for both peripheral nerve interfacing and peripheral nerve regeneration. The microwires were used for recording …

Channel Estimation Overhead Reduction For Downlink Fdd Massive Mimo Systems, Abderrahmane Mayouche

Graduate Theses and Dissertations

Massive multiple-input multiple-output (MIMO) is the concept of deploying a very large number of antennas at the base stations (BS) of cellular networks. Frequency-division duplexing (FDD) massive MIMO systems in the downlink (DL) suffer significantly from the channel estimation overhead. In this thesis, we propose a minimum mean square error (MMSE)-based channel estimation framework that exploits the spatial correlation between the antennas at the BS to reduce the latter overhead. We investigate how the number of antennas at the BS affects the channel estimation error through analytical and asymptotic analysis. In addition, we derive a lower bound on the spectral …

Incorporating A New Class Of Uncertainty In Disaster Relief Logistics Planning, Emre Kirac

Graduate Theses and Dissertations

In recent years, there has been a growing interest among emergency managers in using Social data in disaster response planning. However, the trustworthiness and reliability of posted information are two of the most significant concerns, because much of the user-generated data is initially not verified. Therefore, a key tradeoff exists for emergency managers when considering whether to incorporate Social data in disaster planning efforts. By considering Social data, a larger number of needs can be identified in a shorter amount of time, potentially enabling a faster response and satisfying a class of demand that might not otherwise be discovered. However, …

Nano Clay-Enhanced Calcium Phosphate Cements And Hydrogels For Biomedical Applications, Udayabhanu Jammalamadaka

Doctoral Dissertations

Biomaterials are used as templates for drug delivery, scaffolds in tissue engineering, grafts in surgeries, and support for tissue regeneration. Novel biomaterial composites are needed to meet multifaceted requirements of compatibility, ease of fabrication and controlled drug delivery. Currently used biomaterials in orthopedics surgeries suffer limitations in toxicity and preventing infections. Polymethyl methacrylate (PMMA) used as bone cement suffers from limitations of thermal necrosis and monomer toxicity calls for development of better cementing biomaterials. A biodegradable/bioresorbable cement with good mechanical properties is needed to address this short coming. Metal implants used in fixing fractures or total joint replacement needs improvements …

Investigation Of Small-Scale Thermal Recovery And Storage Systems, Suvhashis Thapa

Doctoral Dissertations

An approach to recover and store waste heat is presented in this dissertation. The waste heat is the energy that is rejected to the environment without being put to practical use and it is a result of both equipment inefficiency and thermodynamic limitation on the equipment and the process. In a typical Otto cycle, for instance, out of the total energy consumed by the system, only one-third of the energy is converted into useful work and the rest is discharged in the environment as waste heat [1]. For a spark ignition, a 1.4 liters internal combustion engine with the thermal …

Studies On The Electrical Transport Properties Of Carbon Nanotube Composites, Taylor Warren Tarlton

Doctoral Dissertations

This work presents a probabilistic approach to model the electrical transport properties of carbon nanotube composite materials. A pseudo-random generation method is presented with the ability to generate 3-D samples with a variety of different configurations. Periodic boundary conditions are employed in the directions perpendicular to transport to minimize edge effects. Simulations produce values for drift velocity, carrier mobility, and conductivity in samples that account for geometrical features resembling those found in the lab. All results show an excellent agreement to the well-known power law characteristic of percolation processes, which is used to compare across simulations. The effect of sample …

Experimental Investigation And Numerical Simulation Of A Copper Micro-Channel Heat Exchanger With Hfe-7200 Working Fluid, Eric Borquist

Doctoral Dissertations

Ever increasing cost and consumption of global energy resources has inspired the development of energy harvesting techniques which increase system efficiency, sustainability, and environmental impact by using waste energy otherwise lost to the surroundings. As part of a larger effort to produce a multi-energy source prototype, this study focused on the fabrication and testing of a waste heat recovery micro-channel heat exchanger. Reducing cost and facility requirements were a priority for potential industry and commercial adoption of such energy harvesting devices. During development of the micro-channel heat exchanger, a new fabrication process using mature technologies was created that reduced cost, …

Experimental And Numerical Evaluation Of A New Composite Pressure Pipe For A Trenchless Rehabilitation Technology, Xuanchen Yen

Doctoral Dissertations

The information presented in this dissertation is based on research work conducted at Trenchless Technology Center (TTC) at Louisiana Tech University. This work was performed through a contract with China University of Geoscience (CUG) for a gas company. China's gas pipelines need replacement or rehabilitation after 15 to 30 years of service. China's gas industry is looking for suitable techniques to transfer into their market.

When compared to conventional excavation pipeline renewal or replacement methods, there are obvious advantages of TRT for gas pipelines that can impact the triple bottom-line of economic, social and environmental benefits. An introduction of TRT …

Analysis Of Bridge Deck Sections By Pseudo-Compressibility Method Based On Fdm And Les: Improving Performance Through Implementation Of Parallel Computing, Blandine Therese Mbianda Kemayou

Graduate Theses and Dissertations

The incidence of wind on bridges produces static and dynamic loading that must be adequately addressed when designing bridges. Dynamic loading is the primary concern, as the amplitude of the structures response to the applied loading may be greatly amplified. Ideally, the bridge's properties should be designed to avoid dynamic loading. Previous investigations of wind loading on bridges consisted of measuring forces produced on scaled models of bridges within wind tunnels. However, these wind tunnel tests are costly and time consuming due to cost to fabricate and instrument the bridge cross sections. Recent advancements in computational power of computers allow …

Quantification And Characterization Of Fracture Resistance In Asphalt Concrete Based On R-Curve Method, Shu Yang

Graduate Theses and Dissertations

The application of fracture energy is widely applied in the evaluation of cracking in the laboratory for asphalt concrete. However, this single number does not provide information on the characterization of the initiation and propagation of cracks. The Resistance Curve method, or R-Curve, is widely applied in characterizing various materials including, but not limited to, metal, polymer, rock, and composite. This research R-Curve method introduces asphalt concrete through a stepwise approach. First, in chapter one, there is a literature review of the history of fracture mechanics, fracture research in asphalt concrete, and an examination of the role of R-Curve application …

Exploring The Black Space Of Compressive And Shear Modulus, Airam Marlee Morales Vega

Graduate Theses and Dissertations

Uniaxial dynamic modulus is a standard test used to determine the viscoelastic behavior of asphalt pavement materials, with the standard analysis generating a Master Curve. One alternative to the master curve approach is a Black Space diagram, which is a rheological plot that can delineate either dynamic modulus |E*| or shear modulus |G*| vs. phase angle (δ). In this study, four asphalt binders were tested with one aggregate blend. One of these four binders was unmodified and the other three were modified with polymers and acids. Additionally, Polyphosphoric acid (PPA) is compared to the more traditional SBS polymer modification. PPA …

Impact Of Extreme Summer Temperatures On Bridge Structures, Ryan Hagedorn

Graduate Theses and Dissertations

Climate change and its effect on weather in the United States is a well-documented phenomenon. In particular, extreme heat waves have become more intense, more frequent, and longer lasting, especially in the southern United States. As with much of America’s transportation infrastructure, prestressed concrete bridge girders experience the effects of these heat waves. Uneven heating of optimized bridge girder sections results in large non-linear temperature gradients. In this study, temperature was monitored in three different AASHTO I-girders to determine the vertical and transverse temperature gradients in a pre-deck placement condition. It was determined that the current design standard, which uses …

Nanofiltration Rejection Of Contaminants Of Emerging Concern From Municipal Water Resource Recovery Facility Secondary Effluents For Potable Reuse Applications, Steven Michael Jones

Graduate Theses and Dissertations

As reuse of municipal water resource recovery facility (WRRF) effluent becomes vital to augment diminishing fresh drinking water resources, concern exists that conventional barriers may prove deficient and the upcycling of contaminants of emerging concern (CECs) could prove harmful to human health and aquatic species if more effective and robust treatment barriers are not in place.

There are no federal Safe Drinking Water Act (SDWA) regulations in place specifically for direct potable reuse (DPR) of WRRF effluent. Out of necessity, some states are developing their own DPR reuse regulations. Currently, reverse osmosis (RO) is the default full advanced treatment (FAT) …

Structural Identification Of An Elevated Water Tower, James Thomas Norris

Graduate Theses and Dissertations

Elevated water tanks are generally located at higher elevations within a particular geographic area. The location and height of these structures often makes them desirable for installing wireless and cellular communications antennas. The impact of this practice on the long-term serviceability performance of the primary structure is not clear and could be an important consideration deserving further analysis. This paper presents a case study of an elevated water tank that was motivated by this particular consideration. The structure had been retrofitted with cellular antennas during its service and later experienced fatigue cracking at the fill pipe-tank interface. The owner wished …

Evaluation Of Poisson’S Ratio Of Asphalt Concrete, Elvis Alexander Castillo Camarena

Graduate Theses and Dissertations

Poisson´s ratio can be defined as the negative ratio of strains perpendicular to the load direction to the strains parallel to the loading direction. If elastic or viscoelastic models are used, Poisson´s ratio, together with elastic modulus, is a main input used to predict distresses in flexible pavement structures such as rutting and cracking. In asphalt concrete, Poisson’s ratio is commonly measured using two different testing configurations: indirect tension (IDT) and uniaxial. However, results from these two testing configuration can potentially have differences. Design methodologies such as the Mechanistic Empirical Design Guide (MEPDG, now PavementME) have been shown to be …

Field Observations And Computer Modeling Of Tornado-Terrain Interaction And Its Effects On Tornado Damage And Path, Nawfal Shihab Ahmed

Graduate Theses and Dissertations

Tornado forces on structures have been a research focus for the past decades, and some comparisons have been made to distinguish between straight boundary layer (SBL) wind and tornado wind forces on specific structures. However, very little attention has been paid to terrain effects on tornado damage and path. Available damage investigation data for four tornado locations (Joplin-2011, Tuscaloosa-2011, Parish-2011 and Mayflower-2014) is utilized to explore terrain effects on tornado damage and path. Google Earth, site visits and aerial images are employed to study the influence of terrain on an extent of damage and path variation. Additionally, a three dimensional …

Development Of The Masw Method For Pavement Evaluation, Benjamin J. Davis

Graduate Theses and Dissertations

The purpose of this research is to establish a recommended procedure for performing multichannel analysis of surface waves (MASW) on pavements as well as evaluating the ability of MASW to detect a change in shear wave velocity as damage in concrete increases. The tests for establishing a recommended procedure for performing MASW on pavements was conducted at five sites at the University of Arkansas Engineering Research Center in Fayetteville, Arkansas. The five sites consisted of three materials: asphalt, concrete, and soil (two sites were on asphalt, two were on concrete, and one was on soil). The methods evaluated at these …

Simulation Of Conservation Practice Effects On Water Quality Under Current And Future Climate Scenarios, Carlington W. Wallace

Open Access Dissertations

Analysis of the effects of implementing different conservation practices, as well as increased levels of conservation practices under existing and projected future climate, will determine if current conservation practice recommendations will be sufficient to maintain soil and water resources. The Soil and Water Assessment Tool (SWAT) was used to study four watersheds of different sizes (CCW = 680 km2, F34 = 183 km2, AXL = 42 km 2 and ALG = 20 km2) located in Northeastern Indiana. The overarching goal of this study was to evaluate the effect of various agricultural practices on runoff and agricultural chemical losses under current …

Assessment Of An Industrial Type Radiant Heating System For Drying Rough Rice, Anne Adhiambo Okeyo

Graduate Theses and Dissertations

Rough rice is normally harvested at moisture contents (MCs) higher than that for safe storage. The objective for this study was to investigate the effectiveness of scaled-up infrared (IR) heating followed by tempering steps to dry freshly-harvested rough rice. An industrial type, pilot scale, IR drying equipment, designed to convey rough rice on a vibrating conveyor belt was used in this study. The heating zone of the equipment had catalytic IR emitters powered by natural gas. Freshly-harvested rough rice of long-grain pureline (cv. Cheniere), long-grain hybrid (cv. 6XP 756) and medium-grain (cv. CL 271) cultivars at initial moisture contents (IMCs) …

Investigation Of Optical Properties Of Zinc Oxide Photodetector, Tyler Chism

Graduate Theses and Dissertations

UV photodetection devices have many important applications for uses in biological detection, gas sensing, weaponry detection, fire detection, chemical analysis, and many others. Today’s photodetectors often utilize semiconductors such as GaAs to achieve high responsivity and sensitivity. Zinc oxide, unlike many other semiconductors, is cheap, abundant, non-toxic, and easy to grow different morphologies at the micro and nano scale. With the proliferation of these devices also comes the impending need to further study optics and photonics in relation to phononics and plasmonics, and the general principles underlying the interaction of photons with solid state matter and, specifically, semiconductors. For this …

Validation Of A Confocal Light Sheet Microscope Using Push Broom Translation For Biomedical Applications, Joshua Hutcheson

Graduate Theses and Dissertations

There exists a need for research of optical methods capable of image cytometry suitable for point-of-care technology. To propose am optical approach with no moving parts for simplification of mechanical components for the further development of the technology to the poin-of-care, a linear sensor with push broom translation method. Push broom translation is a method of moving objects by the sensor for an extended field of view. A polydimethylsiloxane (PDMS) microfluidic chamber with a syringe pump was used to deliver objects by the sensor. The volumetric rate of the pump was correlated to the integration time of the sensor to …

Genotoxicity Of Graphene In Escherichia Coli, Ananya Sharma

Graduate Theses and Dissertations

Rapid advances in nanotechnology necessitate assessment of the safety of nanomaterials in the resulting products and applications. One key nanomaterial attracting much interest in many areas of science and technology is graphene. Graphene is a one atom thick carbon allotrope arranged in a two-dimensional honeycomb lattice. In addition to being extremely thin, graphene has several extraordinary physical properties such as its exceptional mechanical strength, thermal stability, and high electrical conductivity. Graphene itself is relatively chemically inert and therefore pristine graphene must undergo a process called functionalization, which is combination of chemical and physical treatments that change the properties of graphene, …

Essays In Physicians Preference Items And Inventory Management Within The Healthcare Supply Chain, Mohammad A. Shbool

Graduate Theses and Dissertations

This work is composed of a number of topics in the healthcare area, which are approached separately with appropriate methodologies. The two topics deal with physician preference items via two different approaches. The first one investigates stock keeping unit (SKU) proliferation in healthcare organizations due to physician preference items (PPI). It captures perspectives of physicians and supply chain professionals about this problem through two surveys. The second topic builds a decision-making framework for the PPI selection process that can be used by healthcare organizations to make more objective decisions. A Multi-criteria decision making technique is implemented to illustrate the framework.

Design Of Three-Dimensional Near-Zero Refractive Index Metamaterials, David Flores Iii

Theses and Dissertations

Near-zero refractive index metamaterials exhibit remarkable electromagnetic properties which can and will be applied in the near future. From the known methods of achieving near-zero refractive index, this work primarily focuses on the design of 3D metamaterials whose permittivity and permeability are both close to zero while maintaining relatively low loss factor. The design of the metamaterials is based on the chiral shape “omega” and designed to weave periodically as a fishnet. Theoretical analysis, computer modeling and simulation are steps taken in the design of metamaterials. A computational tool based on the robust method for effective parameter extraction is successfully …

A Tabu Search, Augment-Merge Heuristic To Solve The Stochastic Location Arc Routing Problem, Tiffany L. Yang

Graduate Theses and Dissertations

The location arc routing problem (LARP) is a network optimization problem combining strategic facility location decisions and tactical or operational vehicle routing decisions for customer demand located on arcs of a network. The LARP seeks to locate facilities, or depots, and create vehicle delivery routes to minimize costs. The total cost is comprised of three components: fixed facility locations costs, fixed route creation (or vehicle acquisition) costs, and variable arc traversal costs. The applications of the LARP are varied and often include public services such as mail delivery, garbage collection, and street sweeping. In all of these applications, the magnitude …

Markov-Based Ranking Methods, Baback Vaziri

Open Access Dissertations

Ranking methods are an essential tool to help make decisions. This dissertation document examines different aspects of the theory and application of pairwise comparison ranking methods, specifically those that use Markov chains. First, a new method is developed to solve a traditional recruiting problem, and is shown to improve the predictive power of its ranking. Next, modifications are made to an existing method that theoretically improves the reliability, while maintaining the rank integrity. Last, a framework is developed that defines a fair and comprehensive ranking method, and several popular methods are evaluated in their ability to adhere to the said …