Engineering Commons^™

Mechanical, Thermal And Fire Behaviour Of Hemp-Based Composites With Different Binders For Sustainable Building Applications, Anilcan Aygun, Fahri Birinci, Selim Aytac, Ali Kemal Ayan, Hasan Alp Sahin, Ibrahim Isildak

Journal of Sustainable Construction Materials and Technologies

This study investigates the physical, mechanical and thermal properties of hemp-based composites produced with traditional binders such as lime, cement, gypsum, clay, and water-based glue. Hemp fractions of different sizes (splinter, shiv, fiber and powder) were combined with these binders to manufacture cube and plate specimens, which were tested for physical, mechanical, thermal, and temperature resistance properties. The study aims to compare the mechanical, physical, thermal, and fire behaviour of these composites to assess their suitability for sustainable construction applications. The hemp-based composites were tested for unit weight, water absorption, compressive strength and thermal conductivity. Most specimens are lightweight (<1000 kg/m3), and exhibit good thermal insulation performance and high compressive deformability, making them suitable for seismic-prone regions. The glue-based composite had the lowest unit weight, measured as 330 kg/m3. Thermal conductivity ranged from 0.051 to 0.243 W/m· K, with several mixtures performing better than natural pumice. While cement-based composites showed the highest compressive strength, ranging from 5.5 to 24.8 kg/cm2, natural hydraulic lime is the lowest. Water absorption was high, and moisture release occurred slowly across all hemp fractions. Combustion tests indicated that hemp-based materials have moderate temperature resistance, with charring temperatures ranging from 238–265°C for raw hemp and 300–385°C when mixed with binders. Overall, hemp-based composites are lightweight, eco-friendly, and suitable for non-load-bearing construction and insulation applications. However, improvements in moisture resistance and long-term durability are necessary to enhance their practical applicability.

Sustainable Cow Dung Bricks: An Innovative Approach To Eco-Friendly Masonry With Enhanced Thermal And Mechanical Performance, Nagesh Sugandhi, Sachin Patil, Satish Reddy, Ashwini G, Santosh Kumar

Journal of Sustainable Construction Materials and Technologies

This study explores the development, characterization, and performance of sustainable cow dung bricks using locally sourced organic (cow dung) and mineral (clay, quartz sand, feldspar, lime) constituents for non-load-bearing masonry in India. Three blends with varying cow dung content (70%, 75%, 80%) were mixed, molded, air dried, and cured without kiln firing to reduce environmental impact. The bricks' mechanical properties—compressive strength, water absorption, bulk density, flexural strength, shore hardness, and modulus of elasticity—were systematically evaluated with complete statistical documentation (n = 6 replicates per formulation per test age). Microstructural features were investigated using Fourier Transform Infrared Spectroscopy (FTIR) and X-Ray …

Critical Heavy Metal Contamination In The Tigris River, Baghdad: A Comprehensive Assessment Using The Metal Index (Mi), Talib Kamil Abed, Abass J. Kadhem, Muwafaq Hussein Al-Lami

AUIQ Technical Engineering Science

One of the most important rivers in Iraq is the Tigris River, which serves as the primary source of drinking water and irrigation for agricultural purposes. In recent events, researchers have identified growing concerns about heavy metal contamination in the river. To decide the status of the Tigris River, the metal index (MI) was used in this study. To conduct this study, three locations were chosen along the river, and eight likely harmful heavy metals were examined: iron (Fe), lead (Pb), nickel (Ni), zinc (Zn), chromium (Cr), cadmium (Cd), manganese (Mn), and copper (Cu). The results were worrying. The metal …

Equity Evaluation Of Residents’ Transit+Walk Accessibility To Sacramento Healthcare Facilities, Masoud Ghodrat Abadi, Ahoura Zandiatashbar, Aaron Pickett, Stephanie Nemet, Soheil Sharifi

Mineta Transportation Institute

Access to healthcare is a key component of public health equity, yet many U.S. communities remain dependent on private vehicles for medical travel. This study introduces an integrated framework, the Transit+Walk Score (TWS), to evaluate how effectively residents of Sacramento, California, can reach healthcare facilities via public transit and how safely, comfortably, and conveniently they can walk from transit stops to those facilities. The research aims to inform planners, transit agencies, and policy makers in designing equitable and multimodal transportation systems. The research team combined geospatial network modeling and field-based walkability audits to assess 123 healthcare facilities across Sacramento, with …

Analogy2kg: An Automatic Pipeline For Deriving Knowledge Graphs From Long-Text Analogies, Kara Combs, Lance E. Champagne, Bruce A. Cox, Christine M. Schubert Kabban, Trevor Bihl, Grace Lemming

Faculty Publications

Analogical reasoning is an increasingly popular, lightweight solution to enable large language model (LLM)-level reasoning without computational complexity. Still, it has yet to be adopted due to its reliance on strictly hand-formatted data. Therefore, we propose Analogy2KG (“Analogy to Knowledge Graph”), as an automatic pipeline that transforms text into a KG format via a fine-tuned version of information extraction (IE) algorithms for long-text analogies. The need to verify that the complex underlying analogical structure of the data is maintained was done via paired samples tests in the creation and validation of this pipeline. Graph density was used to evaluate the …

Optimizing Warranty Policies For Remanufactured Products: When Should They Be Longer, Shorter, Or Identical To New Product Warranties?, Kunpeng Li, Jun-Yeon Lee

Faculty Publications

Manufacturers adopt different warranty strategies for remanufactured products, offering shorter, identical, or longer warranty periods compared to new products. However, prior research has only focused on manufacturers offering either shorter or identical warranties. In addition, the existing literature has not captured the diminishing returns of warranties, i.e., as the warranty coverage increases, its incremental benefits begin to decrease but the costs continue to increase. To address these gaps, we develop an optimization model that jointly considers pricing and warranty decisions while accounting for warranty’s diminishing effect on consumer’s willingness to pay for remanufactured products. We show that all three observed …

Sustainable Cement-Blast Furnace Slag Mortar, Richa Jain, Harshit Jain, Ashish Nim

Journal of Sustainable Construction Materials and Technologies

New building materials that required and produced less energy are need of today's infrastructure development. The ability of such building materials to promote sustainable development always puts its demand in active mode. With huge consumption of naturally occurring materials in building construction, the problem related to environment degradation is now common for world. Along with this, world is also facing the problem of reuse, recover and scientifically approved disposal of non-biodegradable wastes. Blast furnace slag (BFS) is one of those steel industry wastes that are abundantly available and their disposal arises as prime challenge for industries. This research work makes …

Enhanced Cuckoo Search-Based Optimization For Single Distributed Generation Placement And Sizing In Radial Distribution Systems, Samson Oladayo Ayanlade, Abdulrasaq Jimoh, Richard Oladayo Olarewaju, Ignatius Kema Okakwu, Israel O. Adejumobi, Joseph B. Samson, Oluwadare A. Adebisi, Oluwadare O. Akinrogunde

Al-Bahir

This paper presents an Enhanced Cuckoo Search Algorithm (ECSA) to optimally place and size Distributed Generation (DG) in radial distribution systems to minimize real power loss within operating constraints. The proposed ECSA has exponentially decaying adaptive Lévy flights, constraint-aware solution repair with dynamic penalty coefficients, and diversity-directed stochastic replacement to enhance search robustness and convergence speed. It was tested with 30 independent runs on the IEEE 33-bus, IEEE 69-bus, and a practical Nigerian 32-bus distribution network. The simulations show that the ECSA lowers the active power loss of the IEEE 33-bus system from 201.58 kW to 102.75 kW (49.03%), and …

Voltage-Mode Driver With Sar-Based Termination Calibration, Moustafa M. Elsayed, Abeer T. Khalil, Sameh A. Ibrahim, Mohy Eldin A. Abo-Elsoud

Mansoura Engineering Journal

This paper introduces a DAC-based four-level pulse-amplitude modulation (PAM-4) driver capable of operating at data rates up to 80 Gb/s in 65-nm CMOS technology. A replica-based termination calibration loop is proposed to preserve driver linearity across process, voltage, and temperature (PVT) variations. The proposed driver achieves a relative level mismatch (RLM) of 99.3%. In addition, the transmitter demonstrates a vertical eye opening of 134.8 mV and a horizontal eye opening of 0.44 UI under worst-case conditions.

Information Manager (Bim) Role Profiles, Davitt Lamon, Robert Moore, Stephen Lynam

Reports

This document, Information Manager (BIM) Role Profiles, has been prepared in support of the Irish Government’s Building Information Modelling (BIM) Mandate. It is the result of a collaborative effort between Build Digital, the Department of Public Expenditure, Infrastructure, Public Service Reform and Digitalisation (DPER), the Infrastructure Division, and the National Standards Authority of Ireland (NSAI). Its primary purpose is to define the competencies, responsibilities, and experience required for Information Management (BIM) roles to facilitate the successful digital delivery of public works projects. It is important to recognise that under the ISO 19650 series of standards, Information Management is defined as …

Identification Of Thruster Faults In Underwater Vehicles By Using Custom Encodings In Spiking Neural Networks, Donovan Gegg

LSU Master's Theses

Autonomous Underwater Vehicles (AUVs) are untethered robotic platforms used for tasks such as seafloor mapping, infrastructure inspection, and environmental monitoring. Recent technological advances have produced smaller, more affordable platforms, broadening access to research teams and small companies alike. This miniaturization comes at the cost of them handling drawbacks associated with a more compact machine such as reduced battery capacity as well as limited processing and sensing capabilities. These constraints make small-sized marine vehicle’s reliability critical as they can cause malfunctions, making the loss of a vehicle more likely. Actuator faults are particularly consequential as unintended and unstable control in an …

Multi-Objective Optimization Of Waste Incineration For Minimal Carbon Monoxide And Sulfur Dioxide Emission And Rate Maximization: A Case Study Of Mbezi, Mkuranga-Pwani, Tanzania, Grangay M. Nyanghura, Enock W. Nshama

Tanzania Journal of Science

Incineration is widely employed for hazardous waste disposal, but results in harmful flue gas emissions. This study optimizes a double-chamber incineration process to reduce sulfur dioxide (SO2) and carbon monoxide (CO) emissions while maximizing the incineration rate. The effects of waste mass, primary chamber temperature (PT), and secondary chamber temperature (ST) were analyzed using a full factorial design of 27 experiments. ANOVA revealed that mass had the greatest impact on emissions and incineration time, ST had a moderate effect, and PT had little influence. Regression analysis provided models for incineration time, CO, and SO2 emissions. Single-objective optimization using sequential quadratic …

Comparative Study Of Cement-Rice Husk Ash Stabilized Bricks And Fired Clay Bricks, Daniel R. Samson, Emmanuel S. Leo

Tanzania Journal of Science

In some countries, fired clay bricks (FCBs) are widely used for construction, but their production is energy-intensive, relies largely on firewood, and contributes to deforestation and carbon emissions. This study explores unfired clay bricks stabilised with cement and rice husk ash (RHA) as a sustainable alternative, using Dakawa ward in the Morogoro Region, Tanzania, as a case study. The bricks, with a clay of plasticity index 17%, were stabilized with 6%, 10%, and 14% cement by mass, moulded into 40 mm cubes, and cured for 28 days. The compressive strengths achieved were 1.5, 3.6, and 4.1 MPa with water absorption …

Polymer Microstructures For Advanced Biomanufacturing, Tongyao Wu

LSU Doctoral Dissertations

With the continued growth of the biopharmaceutical industry, the demand for scalable, robust, and resource-efficient platforms for large-scale mammalian cell culture is amplified. Recent developments in microfluidic technology, such as precise control of the microenvironment, showed the potential to improve the performance of cell culture systems. However, constrained by scalability and operational efficiency, applying such approaches to large-scale cell culture and biopharmaceutical production presents challenges. This dissertation addresses these challenges through three independent but conceptually related technological developments. First, a roll-to-roll (R2R) fabrication process was developed for the scalable production of hollow microcarriers (HMCs). HMCs provide three-dimensional microenvironments suitable for …

Structural Dynamic Response Assessment Of Clt Wall Structure Systems In Wind-Only And Sequential Seismic–Wind Scenarios, Yunxiang Ma, Qingli Dai, Xiang Zhao

Michigan Tech Publications

Because of concentrated connection damage, the impact of sequential hazards on CLT shear wall systems is much more severe than that on traditional concrete and steel structures considering ductile component behaviors. The present paper evaluated the dynamic response of CLT wall structures in wind-only and sequential seismic–wind scenarios and compared the structural dynamic responses and damage levels of different CLT wall systems. The structural models were established separately based on an SOM benchmark structure, a SOFIE project three-story CLT shear wall structure, and a PT CLT wall platform structure from the NHERI Tall Wood project. The equivalent fluctuating wind load …

Structural Dynamic Response Assessment Of Clt Wall Structure Systems In Wind-Only And Sequential Seismic–Wind Scenarios, Yunxiang Ma, Qingli Dai, Alexander Zhao

Michigan Tech Publications

Because of concentrated connection damage, the impact of sequential hazards on CLT shear wall systems is much more severe than that on traditional concrete and steel structures considering ductile component behaviors. The present paper evaluated the dynamic response of CLT wall structures in wind-only and sequential seismic–wind scenarios and compared the structural dynamic responses and damage levels of different CLT wall systems. The structural models were established separately based on an SOM benchmark structure, a SOFIE project three-story CLT shear wall structure, and a PT CLT wall platform structure from the NHERI Tall Wood project. The equivalent fluctuating wind load …

A Novel Optuna-Vmd-Ml Framework For Enhanced Settlement Prediction Of Buildings Around Foundation Pits, Jing Zhang, Zhenlin Wang, Shiyu Sheng, Sifan Shen, Chuang He, Huafeng Shan, Haijie He, Li Ai

Civil Engineering Faculty Publications

The prediction of building settlement around foundation pit is of vital importance to ensure the safety and stability of urban construction projects. However, current predictions of buildings surrounding foundation pit face numerous challenges. Therefore, this study proposes a framework that integrates Optuna-based hyperparameter optimization, variational mode decomposition (VMD), and machine learning (ML) for accurate and timely settlement prediction in practical engineering scenarios, referred to as the Optuna–VMD–ML framework. Optuna is employed to tune the hyperparameters of both VMD and the ML models; the Optuna-tuned VMD decomposes the settlement time series into mode components, which are then used to train the …

Graph-Based And Uncertainty-Aware Machine Learning For Academic Performance Prediction, Anca Olivia Muresan

Electronic Theses and Dissertations

Early identification of students at risk of academic failure is essential for timely pedagogical interventions and reducing dropout rates. While Artificial Intelligence (AI) has significantly advanced predictive modeling in education, two primary challenges persist: effectively modeling the complex, evolving relationships within heterogeneous educational data, and ensuring the reliability of model outputs for high-stakes decision-making. This dissertation addresses these challenges by proposing a comprehensive framework for early and continuous student performance prediction applied to the Open University Learning Analytics (OULA) dataset. First, we introduce a Heterogeneous Graph Neural Network (HGNN) approach that utilizes metapath structures to capture latent interactions between diverse …

The New 11th Edition Of The Indiana Mutcd, Joseph Bruno, David Boruff

Purdue Road School

The updated 11th edition of the Indiana MUTCD released in January of 2026 has many significant changes from the 2011 edition. This presentation provides an overview of the changes from the previous edition and significant variations between the federal MUTCD and the Indiana MUTCD.

Building A Vitalizing Team Culture, Iris Bull, Andrew Cibor

Purdue Road School

Leaders in the public sector face unique challenges in the recruitment and retainage of productive employees. Administrative staff from the City of Bloomington Engineering Department present an analysis of the strategies they employ to shape a high performing team. They examine mutable and designed aspects of their processes for advertising, interviewing, hiring, onboarding, and exit interviewing. Session participants will be provided tested strategies for stimulating professional growth, fostering intradepartmental collaboration, and building resilient culture.

Documenting For Success: A Case Study Of A Graduate Writing Retreat, Elliott Rose, Denise Wetzel, Sara C. Kern, Katie O'Hara-Krebs, Laurin Davis, Salah Seoudi, Carmen Cole

Transforming Libraries for Graduate Students

Graduate students often find themselves balancing the demands of research and writing while managing complex academic and personal needs. Writing retreats provide an intentional space for graduate students to focus on their academic goals while supporting community-building, institutional belonging, and a welcoming environment. This proposal outlines a model for academic librarians and staff to plan and implement an effective graduate writing retreat designed to support graduate student academic activities through intentional collaboration and documentation.

Penn State University’s (PSU) Graduate Student Writing Retreat started as an event housed within the University Library’s Science, Technology, Engineering, and Math (STEM) department. The retreat …

History Of The Interstate System In Indiana, Steven Wuertz

Purdue Road School

A brief history of the Interstate System in Indiana and across the Nation— 1956–2026: 70 years of the Interstate System

Iconic Henry Street Bridge In Indianapolis, Marshall Lachecki, Keith Echternach, Mary Appel

Purdue Road School

The iconic new Henry Street bridge over the White River in Indianapolis is a connection to the west side of downtown Indy.  From the challenging hydraulics requirements to the bridge concepts, design, procurement and through construction and archaeology work, the City has worked with many stakeholders and the public to make this new crossing a success.  This presentation will focus on design elements of the bridge while touching upon other project elements.

Improvements In Waterborne Traffic Paint For Indiana, Joseph Bruno, Andrew Blackburn

Purdue Road School

INDOT has updated its specification for waterborne traffic paints that results in improved durability and the ability to apply traffic paint in colder weather. This presentation provides background on INDOT's waterborne traffic paint specification, a summary of the road trials that INDOT conducted to evaluate different paint specifications, future developments for waterborne traffic paint, and a maintenance perspective on INDOT painting operations.

Early In Career Panel: The Value Of Industry Involvement, Stephanie Ferzli, Calvin Rizzo, David Musoke

Purdue Road School

A panel of early-career professionals shares the importance and benefits of participating in industry organizations. Learn how involvement can shape careers and foster professional growth.

Let’S Walk And Talk: Building Trust (And Better Projects) Using Community Walk Audits, Ashlyn Devine, Taylor Firestine

Purdue Road School

This session introduces participants to the benefits gained from engaging in community-centered walking audits as practical tools for advancing quality active transportation projects and building trust with the public. Drawing from Health by Design’s Indiana Road to Zero Academy, participants will join a facilitated walking audit near the Purdue campus to discuss common concerns and questions that these exercises address while demonstrating how collaborative notetaking can translate into better planning, engineering, and policy decisions that reflect the unique needs of the community.

Draining Fountain Square With Alternate Delivery, Jason Koch, Mark St. John, Natalie Stephen

Purdue Road School

Indianapolis DPW has started construction on major drainage improvements in one of its oldest neighborhoods, Fountain Square. Building on lessons learned from similar projects in built-up, commercial areas, DPW decided to use an alternate delivery method to procure construction services. This session will provide a high level review of Indiana’s Public-Private Agreement statue (I.C. 5-23), how DPW applied it to the Fountain Square project, lessons learned, and how DPW plans to use this innovative delivery method for future projects.

Pel Stories, Tim Miller, Cameron Schuh, Sandra Flum, Blake Dollier

Purdue Road School

PEL Stories: Bridging Planning and Environmental Review: This presentation will highlight stories from planning and Environmental Linkages (PEL) projects, demonstrating how early planning can streamline environmental review and improve project outcomes.

IndyPEL: Advancing Planning through Environmental Linkages: This session explores the IndyPEL project, highlighting how Planning and Environmental Linkages (PEL) studies are shaping transportation decisions in Indiana. Attendees will learn about stakeholder engagement, data-driven planning, and lessons learned.

Research On Inter-Satellite Topology Design And Simulation Of Giant Leo Constellation Network With Consistent Pattern, Zhicheng Li, Shuaijun Liu, Lixiang Liu

Journal of System Simulation

Abstract: The giant low earth orbit (LEO) constellation network uses inter-satellite links to form an intersatellite topology, realizing the transmission of data between satellites. In order to adapt to the nature of uniform and symmetrical distribution of satellites in the constellation, this paper used a consistent connection pattern between satellites to construct an inter-satellite topology, and by analyzing the arrangement of non-mirror links in the constellation, it was found that the connection method of each link of the satellite itself could be independent of each other, which reduced the simulation complexity and the solution space of the inter-satellite topology. …

Design And Verification Of Manned-Unmanned Collaborative Combat Capability System Based On Mbse, Fangbo Wang, Jian Guo, Chenglie Du, Yifan Liu, Pengpeng Zhang

Journal of System Simulation

Abstract: The traditional model-based systems engineering (MBSE) method has problems of failing to fully exhibit complex combat logics in manned-unmanned collaborative combat system modeling, neglecting the scenario constraints in interface modeling, and requiring long-term and costly algorithm verification. In order to solve the problems, a methodology and design tool based on MBSE was proposed. An integrated verification method of a system's operational logic, interface design, and algorithmic design was constructed, thus providing a digital and rapidly iterative verification approach for system simulation. A verification environment for multiple key algorithm simulations was established, effectively reducing the economic cost of building verification …