Engineering Commons^™

Implantable, Sensor-Embedded Vascular Graft Towards Wireless Monitoring Of Stenosis, Nnamdi Dike

LSU Master's Theses

Arteriovenous (AV) grafts are commonly used to provide vascular access for hemodialysis in patients with end-stage renal disease. Despite their widespread use, AV grafts are prone to complications such as stenosis and thrombosis. Early detection of these conditions remains challenging with current monitoring methods too costly or insufficient. This work presents the design, fabrication, and validation of an LC pressure sensor embedded within a model AV graft to enable real-time monitoring. The proposed system integrates a parallel-plate capacitive pressure sensor with a spiral inductor to form an LC circuit embedded within an elastomeric graft wall. The Ecoflex 00-30 dielectric layer …

Application Of Fidic Epc/Turnkey Contract Under The Egyptian Public Works Contracts Law, Ahmed Alhady Dr., Mahmoud Mahmoud Ahmed Eng., Ahmed Elhakeem Prof., Mohamed Ibrahim Dr.

Civil Engineering

This study focuses on the application of FIDIC Conditions of Contract for EPC Turnkey Projects—Silver Book 1999, (FIDIC (EPC&T)), when governed by the Egyptian Law of Contracts concluded by public bodies No. 182 of 2018 (ELC) due to the conflicts that may arise from such application. Hence, this study identifies specific FIDIC (EPC&T) 1999 clauses that have the potential for conflicts with ELC, shows the similarities and disparities between these clauses and the relevant ELC articles, and provides recommendations to ensure the successful application of FIDIC (EPC&T) 1999 under ELC. This was achieved through a multistep research methodology in which …

Leveraging River Forecast Center Knowledge To Improve Large-Scale Hydrologic Model Performance Through Bias Correction, Ian Mathews

Theses and Dissertations

The National Water Model (NWM) provides continental-scale streamflow predictions but exhibits bias and reduced skill in highly regulated and snow-driven basins. In contrast, River Forecast Center (RFC) models incorporate decades of local calibration and regulatory knowledge but are limited in spatial coverage to specific points of interest. This study evaluates whether hydrologic knowledge embedded in RFC-calibrated simulations can be transferred to improve NWM performance at unmonitored locations using the Streamflow Analysis for Bias Estimation and Reduction (SABER) framework. Using Colorado Basin River Forecast Center (CBRFC) simulations as surrogate reference data, we applied SABER to the NWM 44-year retrospective model simulation …

On The Drainage Vortices Of Liquid In A Container With Two Outlets, Radivoje Stankovic

Electronic Theses and Dissertations

Vortices that form over multiple drainage ports may exhibit a distinct, periodic alternating behavior, whereby the air core moves periodically between different drainage ports. The physical processes which govern this behavior have not yet been explained, despite the widespread and thorough attempts to describe the flow of water through single or multiple outlets. Early experiments on the alternating behavior of this vortex resulted in a nondimensional relation between the alternating frequency and water height and container geometry with an R2 = 0.91. Subsequent 2D PIV measurements of the flow were performed at different laser heights of 25 mm and 128 …

Exploring The Stress-Strain Relationship Of Lightweight Concrete To Enhance The Lifecycle Performance Of Transportation Highways And Bridges, Fariborz M. Tehrani

Mineta Transportation Institute

Concrete is the primary construction material of bridges, roads, and other transportation infrastructure across the United States, but conventional normal-weight concrete (NWC) is heavy, prone to cracking, and expensive to maintain over time. This study examines the mechanical properties, durability, and lifecycle performance of lightweight aggregate concrete (LWC) and internally cured concrete (ICC) as alternatives in transportation infrastructure applications. Through laboratory testing, computer modeling, and lifecycle analysis, the research evaluates how these materials perform in terms of strength, flexibility, durability, cost, and environmental impact. The results show that LWC and ICC can meet required strength levels while being lighter and …

Using Geoscience To Empower A Community And Provide Access To Potable Groundwater, Hendratta Ali Dr

SACAD: Scholarly Activities

Access to potable water remains challenging around the world and remains one of the UN Sustainable Development Goals for 2030. Barriers to clean water access are exacerbated by the lack of technical expertise, limited funding for education and training, and the absence of reliable infrastructure that provides access to clean water. The Geoscientists Without Borders program, supported FHSU with funding to test, explore and provide access to clean potable groundwater to a rural community in Cameroon. We conducted water quality analyses, identified, mapped and located deep aquifers in fractured metamorphic rocks. Water quality analyses showed acidic pH and elevated amounts …

Impact Of Compositing Method Choice On Spectral Fidelity In Semi-Arid Mining Landscapes, Ruslan Nailevich Khadzhaev, Dilbarkhon Shamuradovna Fazilova

Technical science and innovation

This study examines the choice of satellite image compositing method for Landsat 8/9 (Collection 2 Level-2) imagery to calculate the Normalised Difference Vegetation Index (NDVI). This paper compares the methods used to create median and medoid composites for the Angren open pit coal mine. The 'synthetic' nature of the composites is quantified based on a spectral consistency metric. This involves assessing the equivalence of median and medoid values, and analysing the sensitivity of NDVI to the compositing method across varying surface types. A strongly right-skewed distribution of surface reflectance values was found, covering 82.8% of the pixels, mostly in areas …

Analysis Of Automatic Regulation Based On The Dynamic Indicators Of The Working Body For Cleaning Channels And Ditches, Nasiba Siraj Amirbayova

Technical science and innovation

Today, the comprehensive development of road infrastructure and agriculture directly requires the reconstruction and effective use of systems intended for irrigation and protection of road surfaces. The goal of agricultural development has made it necessary to increase attention to this area. This also reveals the correct use and operation of existing melioration irrigation systems as an important problem. This is mainly one of the issues of correct operation of road infrastructure. It is known that the majority of agricultural products are produced in areas where irrigation systems are widely developed. On the other hand, the use of collector-drainage networks, cleaning …

Mathematical Modelling And Optimisation Of The Reactor For The Esterification Process Of Safflower Oil With N-Butyl Alcohol, Sadritdin Makhamatdinovich Turabdjanov Academician, Hasan Sadriddin Ugli Fozilov, Ozoda Bakhronovna Axmedova, Sadriddin Fayzullayevich Fozilov

Technical science and innovation

This study addresses the mathematical modelling and optimisation of a reactor for the esterification of safflower oil with n-butyl alcohol. To improve process controllability and reduce the need for numerous pilot-scale trials, an ideal-mixing continuous stirred-tank reactor (CSTR) model was adopted. Incorporating reaction kinetics, the effect of contact time on the relative viscosity of the product mixture was analysed. The modelling results indicate that achieving an acceptable degree of feedstock conversion is difficult when a single ideal-mixing reactor is used. Therefore, a CSTR cascade was proposed, and the configuration with N = 2 reactors was selected as the most appropriate …

Development Of New Methods For Calculating Pressure And Energy Losses For Pumping Station Water Intakes, Faxriddin Jaylovovich Nosirov, Oleg Yakovlevich Glovatsky, Jurabek Abdyrahmon O'G'Li Urolov, Abduqodirkhon Samatkhonovich Abdullakhaev, Anvar Mamur Ugli Uzokov

Technical science and innovation

The aim of this study is to improve the efficiency of water resource management methods. Improvements to the water intake of the Karshi Main Canal are considered using calculations of pressure losses at the entry and exit of liquid into the flow, which differ from pressure losses in a stationary medium. The article considers some of the methods for using renewable energy sources, where the change in gravitational potential energy does not depend on the way of using energy and the operating scheme is a gravitational energy pump. The implementation of control and monitoring systems is necessary to ensure optimal …

Refinement Of Wind Speed Estimation At Turbine Hub Height Using Satellite Data And Regression Analysis Under Complex Terrain Conditions, Isroil Abriyevich Yuldoshev, Tulqin Rustamovich Jamolov, Sa'dullo Sayfiddin Ugli Fazliddinov, Jumanazar Farhodjon OʻGʻL Abdurashidov

Technical science and innovation

Reliable assessment of wind energy potential in regions characterized by complex terrain is often constrained by the limited availability of ground-based meteorological measurements. This study proposes an improved regression-based approach for refining wind speed estimates at the wind turbine hub height of 65 m using satellite-derived data from the NASA POWER database combined with a logarithmic vertical wind profile. The proposed methodology is validated using real operational data from a 750 kW wind power plant located in the mountainous Bostanlyk district of Uzbekistan for the period 2018–2021. The regression analysis demonstrates a strong linear relationship between the extrapolated wind speed …

Modern Promising Directions For The Development Of Alternating Current Converters, Shukhrat Badretdinovich Umarov, Ubaydullo Abdushukur Ugli Boqijonov

Technical science and innovation

The relevance of this work is explained by the presentation of modern trends in the development of powerful AC converters, which are widely used in various industrial processes, agriculture, and other sectors. Today, the most widely used method for creating powerful AC converters is the use of double energy conversion systems (DECS). The article shows the electrical diagram and functional tasks of the DECS system, as well as the technical and schematic capabilities of the pulse width modulation (PWM) inverter.  It highlights the importance of effectively using independent (autonomous) filters to improve the hybrid and matrix structure, as well as …

Studying The Performance Of Photovoltaic Installations In The Pvsyst Software Package, Zukha Islamovna Juraeva, Isroil Abriyevich Yuldoshev I.A.Y., Islom Rakhmatovich Juraev

Technical science and innovation

This article simulates the operation of photovoltaic installations consisting of photovoltaic panels of crystalline and thin-film technologies. The calculations were performed in the PVSyst software package 7.4.8 version. In the calculations, the input parameters were environmental factors, the angle of inclination of the panels to the horizon. In calculating the values of the solar radiation flux density, the program selects the METEONORM climate database in accordance with the geographical area of the Tashkent city. The tilt angles of the photovoltaic panels of the installation were set manually by selecting specific values of the characteristic tilt angles in the range from …

Analysis Of Soda Production Processes In Ammonia-Soda Production, Nadirbek Rustambekovich Yusupbekov Professor, Djalolitdin Paxritdinovich Mukhitdinov Professor, Fatima Faxritdinovna Iskhakova

Technical science and innovation

This paper provides a comprehensive analysis of the fundamental principles of the classical Solvay process, a key component in the industrial production of soda ash. It is noted that despite its widespread use and technological maturity, the process has a number of significant technological, energy, and environmental limitations associated with high raw material and energy consumption, the generation of significant industrial waste, and CO₂ emissions. The need to modernize the traditional production process to improve efficiency, resource conservation, and environmental sustainability is substantiated. The review systematically summarizes current approaches to process improvement, including modified versions of the Solvay process, the …

Analysis And Study Of Telemetry Systems For Directional And Horizontal Well Drilling, Jahongir Abdiganiyev Erkin Ugli, Sherali Halloqovich Umedov

Technical science and innovation

The article discusses the issues of reducing non-productive drilling time during the construction of directional and horizontal wells. The main focus is on the analysis of drilling conditions in complex geological and high-temperature environments. Particular attention is paid to drilling conditions in the territory of the Republic of Uzbekistan, with a specific study of data from the Boysun and Ustyurt regions. An analysis and study of the performance of telemetry systems available on the market, as well as their main technical characteristics, have been conducted. Key factors affecting the accuracy of wellbore trajectory measurements under various geological and technical conditions …

Adaptive Multi-Stage Fuzzy Logic Approach With Dynamic Weight Adjustment For Robust Power Transformer Diagnostics, Dilafruz Rustamovna Abdullabekova, Odiljon Muhammadjonovich Kutbidinov

Technical science and innovation

An adaptive multi-level fuzzy logic framework with dynamic weight adjustment for power transformer fault diagnosis and health index assessment was proposed in this study. A comprehensive analysis of existing transformer diagnostic approaches was performed, and their limitations related to static weighting schemes and uncertainty handling were identified. A hierarchical fuzzy inference structure was introduced, integrating multi-source diagnostic data, including dissolved gas analysis, transformer oil quality indicators, thermal parameters, and electrical measurements. At the first level, individual fuzzy subsystems were developed to evaluate partial condition indices associated with insulation degradation, oil aging, and thermal–electrical stress. At the second level, a global …

Elemental And Mineralogical Characterization Of Permo-Carboniferous Coal In The Ngaka Coalfield, Southwest Tanzania: Implications For Coal Quality Variation, John W. Gama, Justina J. Saroni, Remigius L. Gama

Tanzania Journal of Science

Coal from heterolithic seams exhibits distinct chemical characteristics due to interbedded non-coal beds, which influence its quality and usability. Despite extensive research in these settings, the elemental and mineralogical characteristics of the heterolithic sequences of the Mchuchuma Formation (K2) in the Ngaka Coalfield remain poorly documented. This study provides the first detailed assessment of K2 seams across five active mine sites. Eleven representative samples were analyzed using proximate, elemental, and mineralogical techniques, supported by Pearson correlation, binary analysis, and Principal Component Analysis. Proximate analysis revealed that ash content varies across mine sites, with values ranging from 9.17 to 25.03%, volatile …

Design Of Virtual Impedance Controller For Parallel-Connected Converters In A Microgrid, Manyanda Makoye, Francis Mwasilu, Peter M. Makolo, Jackson Justo

Tanzania Journal of Science

This paper addresses the significant challenge of inaccurate power sharing among Distributed Generators (DGs) in islanded microgrids, which is primarily caused by mismatched feeder and line impedances. Conventional decentralized control solutions often fail to ensure accurate power sharing, especially when line impedances are resistive. To overcome this, the paper proposes a robust, coordinated Virtual Impedance Control (VIC) strategy for DGs. This method implements fixed virtual resistance and virtual inductance to standardize the output impedance characteristics of parallel-connected inverters, thereby minimizing impedance discrepancies and enhancing system stability through increased damping. The theoretical analysis and design of the VIC were validated through …

Relationships Between The Parameters Of The Vegetable Oil Refining Process And Energy Consumption, Umidjon Abdimajitovich Ruziev, Marufjon Kobuljonovich Shodiev

Technical science and innovation

Vegetable oil refining is a multi-stage thermochemical process that is closely related to energy consumption, process parameters, product quality, and food safety requirements. Despite the extensive scientific literature on oil quality and pollutant formation, the quantitative relationship between purification parameters and relative energy consumption has not been sufficiently studied. In this work, a systematic analysis and engineering synthesis were carried out based on existing studies. According to the analysis results, the deodorization process accounts for 52–56% of the total thermal energy consumption, with a relative value ranging from 160 to 380 kJ/kg, depending on the enterprise's capacity and heat utilization …

Theoretical And Practical Foundations Of Healthcare System Digitalization, Sanjarbek Bekturdiev Sharifboyevich Phd, Muxlisa G‘Ulom Qizi G‘Ofurova

Technical science and innovation

The digital transformation of healthcare represents a key direction in improving the accessibility, quality, and efficiency of medical services. This study examines the main components of eHealth, including telemedicine, electronic health records, cloud technologies, and mobile applications, as well as the role of international organizations in promoting national digital health strategies. Particular attention is given to the current state of digital healthcare in the Republic of Uzbekistan, where significant progress has been made in developing infrastructure and implementing information systems, although challenges related to integration, standardization, and regulatory support remain. The work identifies the main trends in the development of …

Mapping Of Petroleum-Prospective Structures In The Jurassic Complex Of The Western Aral Uplift Based On Seismic Attributes, Yuliya Leonidovna Salaydinova, Marina Georgievna Yuldasheva

Technical science and innovation

To solve the problems of identifying and mapping prospective structures, comprehensive analysis of 3D seismic attributes is widely used at the present stage of geological research; it was applied to assess the petroleum potential of the Jurassic rock complex in the Aral Sea offshore area of the Ustyurt region. The study integrates structural mapping on the tops of Permo-Triassic and Jurassic horizons, attribute volumes (Variance/Coherence, Sweetness, root-mean-square (RMS) amplitude, Envelope) and generalized spectral decomposition (GSD, 19-41 Hz), combined with well-log and well-test data from the Western Aral, Meros, Dengiz and Karakum areas. Variance attributes were used to delineate fault zones …

Manufacturing Of Functional Surface Coatings In The Automotive Industry, Gulirano Saidakhmedova

Technical science and innovation

The development of environmentally sustainable technologies for material processing represents one of the most pressing scientific and technical challenges in modern industrial production. This issue is particularly relevant to the automotive industry, where growing demands for energy efficiency, durability, and environmental safety necessitate the adoption of advanced manufacturing methods. Special attention is given to developing vacuum-based, import-substituting equipment and technologies for producing functional coatings from composite materials with predefined physical, mechanical, and optical properties, including reflective and protective characteristics. Current requirements for mechanical engineering products and production technologies drive the need for innovative approaches to material processing and specialized technical …

Movable Bed Physical Model Investigation Of Bed Level Changes Caused By River Sediment Diversions, Hayden Cole Franklin

LSU Master's Theses

Since 1932, due to human and natural processes, over 2,000 square miles of Louisiana’s coast have been lost. River sediment diversions have been proposed as sustainable options to combat land loss. These projects, like the proposed Mid-Barataria Sediment Diversion, are designed to deliver sediment-rich Mississippi River water into nearby bays and estuaries, helping build and maintain land. However, river sediment diversions may alter river hydraulics and sediment transport, potentially inducing upstream degradation and downstream aggradation. Using the Lower Mississippi River Physical Model (LMRPM), this study quantitatively analyzed bed level changes as well as hydraulic conditions associated with the proposed Mid-Barataria …

Enterprise Risk Management And Firm Performance In China: The Moderating Role Of Risk Management Committee, Liang Yankun

Student Works (2020-2029)

Risk management has increasingly become an interesting topic among the academicians and industry practitioners, following the 2008 global financial crisis. Motivated from the growing evidence of the significant role of Enterprise Risk Management (ERM) in improving firm performance, this study examines the relationship between ERM and firm performance in the context of China. Furthermore, this study explores the moderating role of risk management committee (RMC) on the relationship between ERM and firm performance in China. Drawing upon 94 public listed firms on the Shanghai Stock Exchange from 2018 to 2021, this study finds that ERM has significantly and positively affects …

Iron Ore Tailings Reprocessing By Electrostatic Separation Plus Two-Stage Froth Flotation, Vincent Bailey Arohunmolase, Akintunde Stephen Samakinde, Palas Kamlakar Borkar, Daniel Amponsah-Berko, Timothy Eisele

Michigan Tech Publications

The reprocessing of tailings is crucial for recovering valuable iron and reducing the environmental impact associated with tailings disposal. The raw iron ore tailings used in this study had an initial iron oxide content of 24.05 wt% Fe2O3, as determined by ICP-OES analysis. This study investigates the practicality of tailings reprocessing to enhance iron oxide content by integrating electrostatic separation with a two-stage froth flotation process consisting of direct anionic flotation using oleic acid followed by reverse cationic flotation using amine collectors. The primary goal is to efficiently recover valuable iron from tailings, thereby reducing waste and promoting sustainable resource …

Impact Of Collodion Thickness On Fission Track Generation Within Lexan Employed For Nuclear Forensic Analyses, Ryan K. Chapman, Zachary P. Meisel, Abigail A. Bickley

Faculty Publications

We report results from a computational study of fission track damage within a Lexan substrate caused by ²³⁵U suspended within a collodion film of varied thickness. MCNP6.3 was used to model energy deposition and displacements per atom within a Lexan film coated by a film of collodion, located within the air-filled 6 inch dry tube of a TRIGA reactor. The collodion layer was varied between 20 and 100 μm thickness, resulting in an 8.8% difference in energy deposition and 12% difference in displacements-per-atom within the Lexan substrate. These findings indicate that collodion adhesive thickness has a moderate impact on …

A Dynamic Systems Framework For Customer Lifecycle Management: From Latent State Discovery To Robust Control Policy, Ali Nasirzonouzi

Northeast Journal of Complex Systems (NEJCS)

Traditional marketing often relies on static strategies that fail to capture dynamic customer behavior. This paper introduces an integrated framework to model and control the customer lifecycle, bridging the gap between empirical data and computational simulation. Using the Customer Personality Analysis dataset, we implemented a five-stage methodology. We first identified three distinct customer segments (At-Risk, Standard, High-Value) using Gaussian Mixture Models. To address the lack of longitudinal data, we calibrated a normative transition model based on customer inertia principles. Our analysis revealed that marketing effectiveness is highly state-dependent; notably, At-Risk customers exhibited a 33.5% lift when targeted with catalogs. Leveraging …

Development Of A Novel Cfd Approach For Predicting Multiphase Flow Enhanced By Machine Learning, Abdulrahman Elazazi Mohamed

Thesis/ Dissertation Defenses

Accurate estimation of interface orientation is crucial for ensuring both the accuracy and robustness of Volume of Fluid (VOF) schemes in multiphase flow simulations, especially when using non-uniform Cartesian meshes. Conventional gradient reconstruction approaches, such as least-squares (LSQ) methods, often suffer from significant errors and strong oscillations on highly stretched grids. This thesis proposes a grid-transferable, learning-based methodology that predicts interface unit normal vectors directly from the local volume-fraction field on non-uniform structured Cartesian grids by means of a compact feedforward neural network.

The methodology extends earlier work originally developed for uniform grids, which is first reproduced to assess how …

Escaping Isolation: An Analysis Of Virtual Machine And Container Breakout Vulnerabilities, Felix Iov

Cybersecurity Undergraduate Research Showcase

Cloud computing providers rely on multi-tenant architectures to maximize resource efficiency. This infrastructure depends on virtualization, which provides isolation between clients. This comes primarily in the form of Virtual Machines (VMs) and Containers. However, “breakout attacks” or “escapes” are a critical threat where attackers bypass these isolation layers to gain unauthorized access to the host system and neighboring environments. This paper surveys virtualization escape threats and analyzes three case studies: a runc container escape (Leaky Vessels), a VMware ESXi VM escape (VSOCKPuppet), and an NVIDIA GPU container escape (NVIDIAScape). Each demonstrates different attack surfaces, including file descriptor misuse, kernel driver …

Security Risks Of Ai-Generated Code In Software Development, Maame Agyekum

Cybersecurity Undergraduate Research Showcase

Artificial Intelligence(AI) has recently forced change globally, public Institutions and as well as national security. Advancement in machine learning, mixed datasets have enabled significantly powerful systems while being capable of operating at a large scale. As innovation and technological advancement increases at rapid pace, issues like a regulation gap where scientific development far exceeds the government’s ability to regulate and establish an effective oversight. As a result, Artificial Intelligence has been controlled by private companies, leading to an industry where speed and profit often outweigh safety and ethical responsibility.