Engineering Commons^™

Vacuum Modification Of The Surface Properties Of T15k6 Hard Alloy By Plasma–Chemical Synthesis Of Tin-Cu Coatings, Aleksandr Semenov, Dmitriy Tsyrenov, Nikolay Ulakhanov, Irina Semenova, Undrakh Mishigdorzhiyn, Wen Ma, Simon C. Tung, George E. Totten

Mechanical and Materials Engineering Faculty Publications and Presentations

The design and main parameters of a plasma–chemical reactor containing two compartments are presented. One compartment houses a vacuum-arc evaporator, while the other houses a planar magnetron. The compartments are separated by a diaphragm with a dosing slot for injecting copper vapor into the TiN synthesis compartment. The conditions for the synthesis of superhard TiN-Cu composite coatings are experimentally determined. Based on established process parameters for TiN synthesis in a nitrogen-containing plasma by Ti evaporation using a vacuum-arc discharge, it is proposed to apply TiN-Cu coatings by injecting Cu vapor into the TiN synthesis area and sputtering Cu using a …

Ai-Driven Detection Of Failure Modes In Thermoplastic Composites Using Acoustic Emission Techniques, M. M. Shahzamanian, Li Ai, Paul Ziehl

Civil Engineering Faculty Publications

Composite materials in aircraft structures can suffer impact damage that leaves barely visible yet structurally significant defects, which degrade mechanical performance, especially under compressive loads. Existing methods for identifying failure modes in compression after impact (CAI) tests using acoustic emission (AE) data are limited in accuracy and scope. This study introduces an approach combining AE sensing with a heterogeneous ensemble convolutional neural network (CNN) to detect and classify failure mechanisms in impacted composite specimens. The novelty of this work lies in employing Red, Green, and Blue (RGB) wavelet images, produced through continuous wavelet transform (CWT) of AE signals, as inputs …

Extraction And Interpretation Of Eeg Features For Diagnosis And Severity Prediction Of Ad And Ftd Using Deep Learning, Tuan Vo

Electronic Theses and Dissertations

Alzheimer’s disease (AD) is the most common form of dementia and is characterized by progressive cognitive decline and memory impairment. Frontotemporal dementia (FTD), the second most prevalent form, primarily affects the frontal and temporal lobes and often leads to changes in personality, behavior, and language. Due to overlapping clinical symptoms, FTD is frequently misdiagnosed as AD. Electroencephalography (EEG) offers a portable, non-invasive, and cost-effective method for studying brain activity; however, its diagnostic utility for differentiating dementia subtypes is limited by signal complexity and noise. In this dissertation, I propose an EEG-based feature extraction framework that leverages deep learning to identify …

Sdn Controller For Distributed Quantum Computing, Firas Selmi

Masters Theses

Quantum networks promise transformative capabilities for computation [1], but current hardware remains limited; state-of-the-art quantum processors still operate with only a few hundred qubits [2], far below the scale required for practical applications. This limitation motivates the use of Distributed Quantum Computing (DQC), where computation is performed across multiple interconnected nodes. However, efficient DQC requires global network awareness and orchestration, a role analogous to Software-Defined Networking (SDN) in classical systems. In this work, we investigate the impact of SDN-inspired control logic on quantum networks by executing a scaled distributed implementation of Shor’s algorithm to factor N = 15 over a …

An Evaluation Of Total Navicular Implants: A Scoping Review, James Mcclure Hughes, Nicholas Belardo Obias, Amanda Killeen

School of Podiatric Medicine - Student Research

The aim of this study is to determine the efficacy and safety profile of total navicular implants based on current literature.

Navicular insults such as high-energy trauma, osteonecrosis, and Muller-Weiss syndrome may result in avascular necrosis or a critical sized bone defect, conditions that are highly difficult to manage given current treatment modalities. Total navicular implants may offer a solution to these problems. While 3D printing of implants remains investigational, its use in highly individualized cases involving the talus has had promising results with conditions like avascular necrosis, tumors, trauma, and arthritis. The navicular is unique in its attachments to …

2026 - The Thirtieth Annual Symposium Of Student Scholars

Symposium of Student Scholars Program Books

The full program book from the 30th Annual Symposium of Student Scholars, held on April 22-24, 2026. Includes abstracts from the presentations and posters.

Table Of Contents, The Editors

Coal Geology & Exploration

No abstract provided.

Machine Learning-Based Prediction And Experimental Validation Of The Pyrolysis Product Distribution In Tar-Rich Coals, Dong Shuai, Li Hongqiang, Wu Zhiqiang, Yu Zunyi, Lyu Zitao, Guo Wei, Yang Panxi, Fu Keming, Hao Xuanzhi, Liu Gen, Yang Bolun

Coal Geology & Exploration

Background Tar-rich coals serve as an important coal-based oil and gas resource in China, while their pyrolysis product distribution is governed by the coupling effects of coal properties and reaction conditions. Therefore, rapidly identifying the pyrolysis product distribution patterns holds great significance for the resource evaluation and experimental design of tar-rich coals.Methods Existing studies on tar-rich coals suffer from the insufficient integration of exclusive data and limited synergistic prediction capacities for multiple products. To address these issues, this study constructed a dedicated dataset involving proximate analysis, ultimate analysis, elemental molar ratios, maceral composition, and pyrolysis conditions by systematically collecting …

Evaluation And Research Progress Of Co2 Sequestration In Deep Coal Seams, Xiong Yucan, Xu Shi’Ang, Zhang Pingsong, Lu Haifeng, Jia Yunzhong, Ge Binbin, Li Baiqiang, Liu Chang, Lei Jian, Fu Wenyu

Coal Geology & Exploration

Background With increasing pressure for global carbon emission reduction, geologic CO₂ sequestration has emerged as a critical technical approach to achieving the goals of peak carbon dioxide emissions and carbon neutrality. Owing to their high CO₂ adsorption capacity and favorable sealing conditions, deep coal seams are considered one of the most promising media for CO₂ sequestration, following saline aquifers and depleted hydrocarbon reservoirs. Therefore, the exploitation and utilization of deep coal seams hold significant strategic importance for the green, low-carbon transformation of the coal industry. Methods Based on literature analysis and a review of outcomes from cutting-edge …

Mechanisms Behind The Impacts Of Co2 Concentration On Microbial Methanogenesis In Coal Seams, Wang Junyu, Liu Bingjun, Jiang Xiangqing, Chen Ruifeng, Xue Sheng, Zhou Wanlong, Yang Yundu

Coal Geology & Exploration

Background Coal seams exhibit the extensive distribution of a variety of indigenous functional microorganisms. Among these, some archaea enable methane metabolism using CO₂ as a substrate, providing the potential for the biological CO₂ storage and utilization in coal seams. However, conventional studies focus primarily on the degradation characteristics of coal matrix, leading to a lack of a systematic understanding of the mechanisms governing the adjustment of the methanation process in CO₂-bearing environments. Methods This study investigated the bituminous coals with a high volatile content in the Huainan mining area. Using laboratory-scale experiments on methanogenesis through anaerobic …

Dynamic Prediction On Goaf Surface Subsidence For The Last Two Periods Based On The Erf Time Function, Ren Lianwei, Li Shihui, Wang Wenchang, Li Zhenhua, Chen Shaojie, Dun Zhilin

Coal Geology & Exploration

Background The surface subsidence induced by coal seam mining represents a continuous dynamic evolution process. Constructing a full-time perdition model for surface subsidence in goafs holds significant theoretical and practical values for the rational utilization of land resources, the safety guarantee of engineering construction, and the transformation and development of resource-based cities. Methods To accurately predict the surface subsidence in goafs during its decline and residual periods, this study proposed a prediction model based on the error function (Erf). First, the evolution characteristics of Erf were analyzed, verifying that the subsidence, as well as its velocity and acceleration, predicted using …

Performance Optimization Of Superfine Cement Through Composite Modification Using Coal-Based Solid Waste And Modifiers, Kang Zhipeng, Luo Yong, Xiao Diancai, Ren Shuai, Cai Zhiliang, Gao Xiang, Zhang Kunzhe

Coal Geology & Exploration

Objective Superfine cement-based grouting materials generally suffer from limitations including high bleeding rates, unfavourable rheological properties, poor stability, and strength retrogression. These issues can be mitigated by incorporating modifiers, which allows for the reutilization of coal-based solid waste while enhancing the performance of composite, superfine cement-based grouting materials. Methods Superfine cement-based grouting materials with different mixing ratios were prepared by using superfine cement as the basic material, fly ash (FA) and mineral fines (MFs) as primary admixtures, and modified bentonite, methyl cellulose ether (MCE), U-type expansive agent (UEA), and magnesium oxide (MgO) as modifiers. These grouting materials and pure superfine …

Dynamic Response Characteristics And Failure Mechanism Of Coal-Rock Combination Under Different Immersion Conditions, Zhang Xiangyang, Tong Zhipeng, Duan Yungang, Yang Weikun, Chen Jianben, Xu Linfeng

Coal Geology & Exploration

Background In practical engineering, the waterproof coal pillar usually suffers from different degrees of dynamic load from the overlying strata, and its internal water distribution is non-uniform. Although the traditional “water content” index can reflect the overall water content, it is difficult to describe the non-uniform characteristics of the soaking space. Therefore, it is of great significance to clarify the dynamic failure mechanism of coal and rock mass under different immersion conditions for stability zoning control. Methods On this basis, the coal–rock combined bodies under three different forms of immersion, namely: complete immersion, unilateral immersion, and non-immersion were prepared. These …

Mine Data Fusion Technology Based On Multi-Feature Joint Decision Making, Han Shanshan, Zhang Jifeng, Fan Tao, Liu Qiang, Song Xiaojiao, Qi Zhipeng, Zheng Hangzhou

Coal Geology & Exploration

Background In the field of geological exploration of coal mines, methods such as in-seam seismic exploration, the transient electromagnetic method, and audio-frequency electrical penetration offer unique technical advantages. However, each of these methods can only reflect a single physical property of a medium, suffering from limitations including the one-sidedness of information and the multiple solutions of interpretations, thus failing to adapt to the new situations of current coal mine exploration. Multi-source data fusion promotes a technological development by leaps from one-sided detection to comprehensive analysis through mechanisms of information complementation, feature enhancement, and field-source integration. Therefore, this technology can enhance …

Mechanisms Underlying Lateral Force Applied To A Pdc Cutter On A Pdc Drill Bit During Rotary Rock Breaking, Wei Jiusen, Han Xin, Liu Wei, Gao Deli

Coal Geology & Exploration

Objective To improve the rock-breaking efficiency and durability of drill bits in the theoretical research on the optimal design of drill bits, the key is to systematically reveal both the rock-breaking mechanisms of polycrystalline diamond compact (PDC) cutters and the characteristics of forces applied to them. Methods Existing studies on rock breaking using a single PDC cutter generally adopt a linear or approximately linear cutting mode while neglecting the impacts of the radius of gyration. To address this issue, this study conducted experiments on cylindrical granite samples using a laboratory experimental setting for single-cutter rock breaking. With cutting depth and …

Strategic Layout And Optimization Paths Of The Standard System For The Exploration And Exploitation Of Deep Coalbed Methane, Chen Xinjun, Liu Zengqin, Shen Baojian, Zhao Shihu, Ye Jincheng, Zhang Jiaqi, Wang Tianyun

Coal Geology & Exploration

Objective In China, the deep coalbed methane (CBM) industry has emerged as a key sector for the reserve growth and production addition of natural gas. However, the current CBM technical standard system, which was developed based on shallow CBM practices, is incompatible with the demands for the exploration and development of deep CBM. To address this challenge, this study proposes the optimization paths of the current standard system, aiming to provide standardization support for large-scale exploitation of deep CBM.Methods Deep CBM reservoirs exhibit complex geological conditions of high temperature, pressure, and in-situ stress, as well as the CBM occurrence …

Parameter Optimization And Field Application Of Roof Volume Fracturing Using Horizontal Wells For Coalbed Methane Extraction From Broken-Soft Coal Seams, Zhang Qingli, Sun Siqing, Li Haozhe, Wu Xiaoxuan, Yang Fan, Zheng Yuqi, Li Wenbo

Coal Geology & Exploration

Objective and Method To achieve rapid coalbed methane (CBM) extraction from broken-soft coal seams using surface horizontal wells, this study proposed a volume fracturing technology for coal seam roof using horizontal wells. Focusing coal seam 4-1 in a mining area, this study established a numerical model using finite element analysis (FEA) software Abaqus Using this model, the impacts of in-situ stress on the cross-layer propagation characteristics of multiple fractures were investigated. Through true triaxial hydraulic fracturing experiments, the multi-fracture propagation patterns under varying injection rates of fracturing fluids, perforation cluster numbers, and cluster spacings were analyzed. Using 3D fracturing design …

Structural Design And Parameter Optimization Of A Vibration Absorber For Rescue Casing-While-Drilling Rigs, Liu Pu, Yao Ningping, Zou Zujie, Fan Dong, Wei Hongchao, He Binjie

Coal Geology & Exploration

Objective Rescue drilling rigs undergo intense vibration at borehole mouths when operating in a confined underground space of coal mines. To address this issue, this study designed a compact multi-directional, passive dynamic vibration absorber, aiming to improve the operational stability and safety of the rigs. Methods Based on the spring-mass-damping system theory, a stepwise optimization design method was proposed for the longitudinal and transverse dynamic models of the vibration absorber. For the longitudinal vibration model, the particle swarm optimization (PSO) algorithm was applied for multi-objective parameter optimization. In contrast, for the transverse vibration model, the fixed point theory was employed …

Exploring The Vertical Heterogeneity Of Extremely Thick Aquifers In Coal Mines Through Layered Fine-Scale Pumping Tests, Guo Xiaoming

Coal Geology & Exploration

Objective Extremely thick aquifers in mining areas typically exhibit strong heterogeneity and high water yield. Therefore, they are prone to cause severe water inflow in mines and induce water disasters, representing a major factor affecting the mining safety of numerous mines in China. However, the vertical heterogeneity of these aquifers remains poorly understood, emerging as a primary bottleneck in the prevention and control of such water hazards. Methods To scientifically reveal the vertical heterogeneity characteristics of extremely thick aquifers, this study investigated the extremely thick Luohe Formation aquifer in a coal seam roof of a representative coal mine in the …

Optical Mechanisms Behind Vitrinite Reflectance Suppression Caused By Strong Anisotropy: A Case Study Of Contact Metamorphic Coals, An Yanfei, He Shuyang, Chen Kaixin, Gao Junhan

Coal Geology & Exploration

Objective For vitrinite with weak anisotropy, which proves uniaxial and optically negative, replacing random vitrinite reflectance (R_ran) with the maximum vitrinite reflectance (R_max) allows for the accurate correction of vitrinite reflectance suppression induced by anisotropy. However, as its anisotropy intensifies, vitrinite exhibits increasingly complex optical properties, rendering it challenging to reflect the thermal metamorphic temperature of vitrinite using R_max. Methods This study investigated the strongly anisotropic vitrinite in coals and natural coke subjected to magma intrusion in the Shitai coal mine, Huaibei City, Anhui Province. Using a reflected-polarized light microscope (R-PLM), an …

Mechanisms Behind Thermal Evolution Of The Structural Alignment Of Polycyclic Aromatic Hydrocarbons In Coals: Implications For Structural Transition Of Coal Macromolecules, Song Yu, Jiang Bo, Cheng Guoxi, Zheng Sijian, Li Ming, Ge Yao, Dai Yan, Wang Qian, Feng Guangjun

Coal Geology & Exploration

Objective Coals are highly sensitive to variations in temperature and pressure conditions. The structural evolution of coal macromolecules, driven by tectono-thermal processes, is the key to understanding coal rank transition and geological evolution. The structural alignment of polycyclic aromatic hydrocarbons (PAHs) in coals represents a critical indicator for characterizing coal rank transition and geological evolution. However, due to limited studies, there is a lack of systematic experimental demonstration and theoretical support for the structural alignment and microstructural characteristics of PAHs in coals, as well as their intrinsic relationships with the structural transition of coal macromolecules, during pyrolysis. Methods This study …

Sedimentary Characteristics And Coal Accumulation Patterns Of The Permian Shallow-Water Deltas In Shandong And Its Adjacent Regions, Feng Kai, Li Zengxue, Li Ying, Li Xuchao, Zhang Hui, Zhou Xiaojuan

Coal Geology & Exploration

Objective The Shanxi Formation, deposited during the critical transitional period from the sedimentary filling of epicontinental sea basins to the sedimentation of continental basins, exhibits well-developed shallow-water delta systems and significant coal-forming processes. This study aims to reveal the characteristics of sedimentary environment transformation during the late stage of sedimentary filling of epicontinental sea basins in North China. To this end, the Early Permian shallow-water delta systems in Shandong and its adjacent regions during that period was investigated, including their primary sedimentary characteristics, the predominant bases of sedimentary transformation, and the lithofacies paleogeographic characteristics of coal-forming processes.Methods Based on …

Geological Characteristics And Enrichment-Accumulation Patterns Of Coalbed Methane Within The Jurassic Strata In The Miquan Area Along The Southern Margin Of The Junggar Basin, Wu Luofei, Yang Kangjun, Zhang Jie, Shi Yongxia, Fu Haijiao, Yang Shuguang, Wang Gang, Liu Mengmeng, Li Yueguo, Wang Xiaoming

Coal Geology & Exploration

Objective The southern margin of the Junggar Basin (also referred to as the southern Junggar) possesses abundant medium- to low-rank coalbed methane (CBM) resources, with significant progress achieved in CBM exploration and production. However, there remains a lack of systematic understanding of the genetic mechanisms of CBM within the Middle-Lower Jurassic strata, along with its accumulation and evolution laws, in the Miquan area, southern Junggar. This absence restricts the commercial development of CBM in these strata.Method Focusing on CBM within the Middle-Lower Jurassic Xishanyao and Badaowan formations in the Miquan area, this study further identified the CBM origins and …

Exploring Water Migration Patterns In Reconstructed Soil Layers For Waste Dumps Of Open-Pit Coal Mines Based On Ct Scanning, Fan Tingyu, Zhang Xinghui, Lu Akang, Yang Changde, Wang Shun, Wang Xingming, Sun Xueliang, Ji Quancai

Coal Geology & Exploration

Objective In the arid regions of western China, the ecological restoration of waste dumps within open-pit coal mines plays a key role in green mine construction, while creating a suitable soil profile structure serves as a prerequisite for the ecological restoration.Methods This study investigated the reconstructed soils with a three-layer sponge-like structure consisting of the topsoil, sandy-soil, and mudstone layers for the waste dump of the Hongshaquan open-pit coal mine in Xinjiang. Using computed tomography (CT) scanning, a three-dimensional (3D) pore network model (PNM), and water migration simulation, this study systematically analyzed the pore structures and water migration characteristics …

Technologies For Controlling Water Inrushes From Coal Seam Floors Under Flowing Water And Their Water Plugging Performance, Yang Zhibin

Coal Geology & Exploration

Objective Limestone water hazards in coal seam floors represent one of the two primary categories of mine water hazards in China. Limestone aquifers are generally characterized by abundant static water reserves and considerable dynamic water recharge. To reduce economic losses and casualties caused by water inrushes from limestone aquifers, post-disaster emergency rescue through grouting for water plugging is frequently carried out under flowing water.Methods Based on numerous cases of water inrush control under flowing water in China and the fundamental requirements for control scheme design, this study presents a systematic review of existing technologies for water inrush control under …

Joint Inversion For Heat Transfer Parameters Of Porous Media With Geothermal-Seepage Coupling Based On A Physics-Informed Neural Network, Zhang Xiao, Yang Duoxing, Cong Lin, Cheng Yimei, Zhang Lianzhong

Coal Geology & Exploration

Background The thermal diffusivity and vertical seepage velocity of porous media are critical to characterizing the mechanisms underlying subsurface heat transfer. These two parameters are typically determined through inversion using temperature data since they are difficult to measure directly. Fiber-optic distributed temperature sensing (FO-DTS) can yield high-resolution, continuous temperature profiles, providing data for parameter identification. However, conventional numerical inversion suffers from limitations such as mesh dependency and sensitivity to initial values when used to process continuous monitoring data. Methods This study proposed a joint geothermal parameter inversion method that integrates FO-DTS data with a physics-informed neural network (PINN). Specifically, the …

Joint Inversion Of Borehole-Surface Direct-Current Resistivity Data, Xu Kaijun, Jin Heran, Cao Danping, Mou Bin, Hu Zuzhi

Coal Geology & Exploration

Objective The conventional inversion of surface direct-current (DC) resistivity data faces challenges such as limited exploration accuracy and depth. This study aims to enhance the accuracy and reliability of exploration in complex engineering and geological settings through the joint inversion of borehole-surface DC resistivity data. Methods First, different geoelectric models were constructed through three-dimensional (3D) forward modeling of full-space DC resistivity. Then, the potential response characteristics under surface and borehole observation methods were systematically analyzed to determine the differences in detection sensitivity between surface and borehole observations. Accordingly, a joint 3D inversion technique for borehole-surface DC resistivity data was developed …

Oil-Based Mud Electrical Imaging Logging Responses Of Carbonate Strata, Wu Yuyu, Lai Qiang, Pan Feng, Zhao Zuo’An, Wang Xiaoxing, Wang Yue, Cheng Lu, Wang Zeyu, Yin Rong

Coal Geology & Exploration

Objectives This study aims to characterize the oil-based mud (OBM) electrical imaging logging responses of carbonate strata, highlighting the response characteristics of dissolution vugs, fractures, stratigraphical structures, and special minerals. Methods Tests were conducted on logging data acquisition of a drilled well within the Dengying Formation in the Sichuan Basin before and after OBM was replaced with water-based mud (WBM). Based on the fine-scale core-to-log (CTL) calibration, this study compared the WBM and OBM electrical imaging logging responses of different geological and pore structures. Furthermore, the characteristics of OBM electrical imaging logging responses were further discussed from the measurement principles …

A Cutting Trajectory Planning Technology Driven By Coal Seam Data In A Comprehensive Mining Face, Guo Yifeng, Xue Xusheng, Ma Hongwei, Zhang Guangming, Su Hao, Qi Ailing, Nie Zhen, Ma Kexiang, Wu Xuefei

Coal Geology & Exploration

Objective Currently, the insufficient full-element digitization and the prevalence of “data silos” in fully mechanized mining faces (FMMF) result in poor cutting precision and operational instability of shearers under complex undulating and abrupt geological conditions. These factors pose significant challenges to high-precision proactive trajectory planning. Methods Guided by the academic philosophy that “mining is data acquisition”, this paper proposes a coal seam data-driven cutting trajectory planning method for FMMFs. It elaborates on three core technologies: high-precision digital coal seam modeling, generative model updating and digital twin construction, and data-driven trajectory planning.To address low modeling precision, an intelligent interpolation-based digital coal …

Cost Analysis Formulation For Pv–Evcs–Dstatcom Integrated Distribution Systems Using Enhanced Hunter–Prey Optimization, Pappu Soundarya Lahari, Varaprasad Janamala

Mansoura Engineering Journal

With the rapid and significant growth of Electric Vehicles (EVs) and Distributed Generation (DGs), such as Photovoltaic (PV) deployment, in the distribution system, it is essential to address the challenges of rising power losses, voltage fluctuations, and reactive power imbalances. Optimal DSTATCOM placement in PV-EV integrated systems to mitigate power quality issues is an effective solution. It is thus necessary to evaluate the economic considerations of such heavily compensated networks. This study proposes Enhanced Hunter-Prey Optimization (EHPO) to assess the net savings of the PV-EVCS-DSTATCOM integrated IEEE-33,69, and 118 bus distribution networks in both single and multi-objective modes. The multi-objective …