Engineering Commons^™

Development Of A Mixing-Controlled Combustion Model For 0d Engine Modeling: Using High-Order Models To Guide The Formulation Of Reduced-Order Models, James Gohn

All Dissertations

Vehicles are becoming increasingly complex to comply with the increasingly stringent regulations placed on all market sectors while still maintaining performance requirements. This increased complexity leads to increases in the cost and time it takes to develop and produce these next generation vehicles. To meet demand therefore, it becomes necessary to evaluate numerous design iterations using computer models. There are multiple levels of models that may be necessary for different purposes or use cases. All levels of modeling for virtual prototyping, however, require a level of validation and predictive ability to be useful. To this end, the following thesis presents …

A Machine Learning Framework For Early-Stage Cost Estimation Of Transportation Projects, Pritom Paul

Electronic Theses and Dissertations

To address the limitations of traditional planning-level cost estimating methods, such as reliance on statewide averages, heavy reliance on engineering judgment, and high levels of inaccuracy, this study developed two data-driven frameworks and corresponding tools. The first framework focused on resurfacing projects and used treatment-specific simple linear regression based on lane miles and geographic location. The second addressed a broader group of construction projects and used multiple linear regression with project length, route type, and right-of-way cost as key predictors. In both frameworks, the final estimates are computed by aggregating multiple estimates produced by county-, region-, and state-level models. The …

Ngc - Torch Test Ablation Stand Improvements And Upgrades, Sarah Nelson

Undergraduate Honors Capstone Projects

This capstone project is sponsored by Northrop Grumman (NGC). The goal of the project is to redesign an ablation torch testing system to improve usability, safety, and versatility. Northrop Grumman relies on their ablation torch testing system to conduct quantitative evaluations of materials and high stress and high temperature conditions. The system provides essential data that supports product development, safety validation, and compliance with performance standards. By improving usability, safety, and versatility, NGC will be able to streamline testing operations, increase accuracy of results, and reduce operator risk. The system must allow testing using both a bent and straight torch …

Ai Institute Summer Camp Webinar Summary, Dora Nguyen

Paul English Applied Artificial Intelligence (AI) Institute Publications

This report summarizes the AI Institute Summer Camp informational webinar hosted by the Paul English Applied Artificial Intelligence Institute (PEAAII) at the University of Massachusetts Boston. The webinar introduced the structure, curriculum, learning objectives, and student outcomes associated with the 2026 AI Institute Summer Camp. In addition to summarizing the webinar content, this report analyzes participant questions, engagement trends, and areas of audience interest. Findings indicate strong interest in coding accessibility, mentorship opportunities, student outcomes, research experiences, and program flexibility. The report also identifies opportunities for improving future webinar delivery, including expanded eligibility guidance, pre-camp learning resources, enhanced presentation of …

Decomposition And Spectral Characterization Of Unsteady Loads In Pulse-Jet Propulsion Testing, Cesar Benitez

Theses and Dissertations

Pulsed jet propulsion systems produce inherently unsteady forces whose time-resolved characterization is essential for performance assessment, yet the measured load signal conflates aerodynamic forcing with the dynamic response of the measurement balance itself. This thesis develops a load centered framework for the dynamic characterization of a pulsed jet system, treating the measured load fluctuation as the primary physical observable rather than attempting full true-thrust reconstruction. A single-degree-of-freedom balance model identified through ringdown testing provides the structural reference scale, yielding a natural frequency of 8.5 Hz and damping ratio of 18%. Power spectral density, phase-averaging, and synchronous–residual decomposition is applied uniformly …

Examining The Effects Of Lateral Loading On Railroad Tapered Roller Bearings, Abel David Sanchez Trinidad

Theses and Dissertations

The loading conditions experienced by freight railcar bearings vary as a function of vehicle operating conditions. Under static conditions, bearings are primarily subjected to radial loads transmitted through the wheelset. During operation, however, track irregularities, braking events, railcar load imbalances, and curving introduce complex impact, longitudinal, and lateral forces in addition to the normal radial loading. These lateral forces increase friction within the bearing raceways, which could accelerate wear and potentially lead to premature spall initiation and propagation. While prior research at the University Transportation Center for Railway Safety (UTCRS) has demonstrated that vibration signatures can be used to detect …

Detecting Sophisticated Cyberattacks On Public Water Infrastructure, Ayrton Purdy

Graduate Theses and Dissertations (2019 - present)

In recent years there has been an increasing number of cyberattacks on public water generation and distribution systems. Advanced persistent attackers could usurp sensors and control systems to contaminate public drinking water. In order to conceal their malicious activity, they can manipulate sensor data flows to give the appearance of normal activity. The compromised sensors would report normal chemical levels even though unsafe water is entering the distribution system. In response, this research proposes a multi-sensor, cross-comparison approach to anomaly detection. The proposed approach is designed to detect sophisticated cyberattacks which are not easily detectable using traditional cyber tools. The …

Developing A Framework For Microchip Design Recovery, Eric Diep

Graduate Theses and Dissertations (2019 - present)

Due to the increase in diverse chip production over the past decade, reverse engineering has become a difficult and daunting task. This research develops a methodology for microchip design recovery, seeking to validate and reproduce prior approaches to physical reverse engineering using low-cost tools and techniques. We used mechanical hardware abrasion tools and techniques to delayer and capture silicon integrated chip (IC) layout. We focused on the Mifare Classic EVl microchip, commonly implemented in public transit/transportation cards, to extract information for design recovery. The research explores limitations and advantages of mechanical abrasion and optical microscopy in context to modem chip …

Manufacturing Systems: Characteristics And Dynamics, Alan J. Fitzmorris

Graduate Theses and Dissertations (2019 - present)

This research answers three basic questions. First, what are the behaviors (dynamics) of a manufacturing system in the context of system performance? Are these dynamics best described as linear deterministic, periodic, nonlinear deterministic, or stochastic? Second, what are the complexity (chaotic) characteristics of a manufacturing system, namely the maximal Lyapunov exponent, correlation dimension, and Kolmogorov-Sinai entropy? Third, is there a relationship between complexity characteristics and manufacturing system performance? This research involves four high level steps: data analysis, system dynamics analysis, system complexity analysis, and correlation analysis. The data analyzed consists of concrete plant and shipbuilding shop time series performance data. …

Retrospective Analysis Of Implemented Project Management Within A Small-Scale Student Engineering Project: Beng Fountain Wars Team Case Study, Holli E. Jenkins

Biological and Agricultural Engineering Undergraduate Honors Theses

This honors thesis provides a retrospective analysis of how the 2025 inaugural University of Arkansas’s ASABE Fountain Wars Student Team could be improved through project management. Project commitment, early stakeholder influence, rich communication, and a detailed project plan are all attributes of successful projects, and the team’s strengths and weaknesses within these categories were determined through a team poll. After the poll was conducted, three methodologies, Agile, Hybrid, and Waterfall, were assessed to determine how they would effectively address the team’s weaknesses. A weighted objectives table was created to compare each methodology’s effectiveness across the management categories. The analysis revealed …

Enhancing Food Security In Stann Creek, Belize Using Meat Rabbits: Engineering Perspective, Lindsey Garretson

Biological and Agricultural Engineering Undergraduate Honors Theses

The purpose of this paper is to discuss the engineering perspective within the overall project of using meat rabbits to enhance food security and nutrition within Stann Creek, Belize. From the engineering perspective, the overarching goals were like the overarching project goals including the construction and materials required guide within the manual, designing potential upgrades to the design including a solar and battery system and an automatic watering system, and to design the system to be “practically sustainable” where possible. The constraints for this project included cost, the size of land dedicated for the rabbitry, and the operational and environmental …

A Baseline Study Of Artificial Intelligence Use Among Chemical Engineering Undergraduates At The University Of Arkansas, Natalie J. Erickson

Chemical Engineering Undergraduate Honors Theses

In recent years, artificial intelligence (AI) has shifted from a novel innovation to a tool used in daily life, particularly within higher education. While anecdotal evidence suggests high levels of student engagement with AI, empirical data regarding usage patterns remains limited. This baseline study investigates AI integration among undergraduate chemical engineering students at the University of Arkansas. Through an anonymous survey (N=68; comprising 20 freshmen, 14 sophomores, 16 juniors, and 18 seniors), researchers assessed usage frequency, student comfort levels, and their evolving relationship with AI tools. The findings reveal that 75% of respondents utilize AI for coursework at least once …

From Kernel To Carbon Footprint: Using Life Cycle Analysis To Teach Sustainability In Chemical Engineering, Neal Z. Kinney

Chemical Engineering Undergraduate Honors Theses

Many chemical engineering departments in the United States are currently lacking developed sustainability coursework, leaving many students without a developed understanding of topics such as life cycle analysis (LCA). [1] Therefore, there is a need for engaging and flexible educational tools that can be easily incorporated into course frameworks. This study develops an interactive learning module, expanding upon the work from Pollution Prevention Through Popcorn, a study developed by Rowan University. [2] The module combines experimental analysis of popcorn popping methods with life cycle assessment using OpenLCA to evaluate the environmental impacts of common types of popcorn packaging. Results of …

Surface-Functionalized Silica Nanoparticles For Enhanced Bioavailability In Ophthalmic Mucoadhesive Drug Delivery Applications, Kaylee M. Drake

Chemical Engineering Undergraduate Honors Theses

This study investigates the stimuli-responsive behavior of porcine gastric mucin (PGM) as a model for the conjunctival mucous membrane of the human eye to optimize mucoadhesive ophthalmic drug delivery. As a versatile biopolymer, PGM has a dynamic matrix structure that functions as a selectively permeable barrier, regulating transport across mucosal membranes. To improve drug bioavailability and retention in ocular treatments, silica nanoparticles (SiNPs) were modified with varying surface functional groups and incorporated into the mucin at different physiological pH levels to examine the resulting microstructural changes. Leveraging the amphiphilic and negatively charged characteristics of mucin, positively charged and hydrophobic SiNPs …

Design Of Aluminum-Air Battery Systems And Optimization Of Cetyltrimethylammonium Bromide And 8-Hydroxyquinoline Additives In Alkaline Electrolytes, Steve Chen

Chemical Engineering Undergraduate Honors Theses

The first portion of this thesis focuses on the design and component optimization of aluminum-air batteries to power a car for the Chem-E-Car competition. A range of separators, cathodes, and current collectors was evaluated to determine the optimal configuration for maximizing output. The resulting system consisted of 1000 series aluminum as the anode, cellulose separators saturated in 1 M potassium hydroxide as the electrolyte, and composite PVDF and graphite as the cathode. The improved batteries achieved a power density of 2.14 x 10^-4 W/cm² and were utilized for the Chem-E-Car competition. The second portion of the thesis investigates …

Electrochemical And Mechanical Evaluation Of Cellulose Acetate Electrolyte Films As A Function Of Polyetherimide And Polyethylene Glycol Additives For Supercapacitor Applications, Chase E. Golden

Chemical Engineering Undergraduate Honors Theses

Polymer electrolytes for supercapacitor applications require a balance between mechanical robustness and electrochemical performance. In this study, cellulose acetate (CA) films were modified with additives such as polyetherimide (PEI) and polyethylene glycol (PEG) to test how compositional changes influence mechanical performance, ionic conductivity, and electrochemical charge storage. Films were cast using phase inversion, soaked in a 1 M NaCl aqueous solution, and characterized using Fourier-transform infrared spectroscopy (FTIR), electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), and tensile testing. Films were also evaluated based on fluid uptake for insight into electrolyte retention.

Characterizations show that the addition of PEI increased ionic …

Performance Of Zirconia-Based Catalysts For Cold Plasma-Assisted Dry Methane Reforming, Levi Pile

Chemical Engineering Undergraduate Honors Theses

This study investigates the performance of zirconia-based catalysts in non-thermal plasma (NTP)–assisted dry methane reforming (DMR) for synthesis gas (syngas) production. This work explores an alternative pathway for converting carbon dioxide and methane into valuable products under milder conditions than conventional thermal processes. Experiments were conducted in a radiofrequency plasma reactor to evaluate the effects of plasma power, feed flow rate, and reactant ratios on conversion efficiency. The performance of plasma-only conditions was compared with packed-bed systems using zirconia catalysts. Results show that plasma-only systems achieved modest conversion rates (~16.5% for CH₄ and ~12.0% for CO₂), while …

Cationic Polymer-Grafted Magnetic Nanoparticles For Enhanced Removal Of Anionic Dyes From Wastewater, Joia A. Traver

Chemical Engineering Undergraduate Honors Theses

Water scarcity and pollution are escalating global challenges, with textile industry wastewater often enriched with toxic dyes posing significant risks to environmental and human health. These contaminants increase turbidity, reduce dissolved oxygen levels, and ultimately impair aquatic ecosystems. This thesis focuses on the remediation of dye-contaminated water using nanoscale polymeric adsorbents. Methyl orange, a common anionic dye widely used in textile and leather industries, was selected as the model contaminant due to its terminal sulfonate group, which enables strong electrostatic and hydrogen-bonding interactions with cationic functional materials.

In this work, magnetic nanoparticles grafted with cationic polymers were synthesized and evaluated …

Demonstration Of The Relationship Between Irwin Spire Quantity And Boundary Layer Depth In The Chemical Hazards Research Center Wind Tunnel, Jace D. Beckwith

Chemical Engineering Undergraduate Honors Theses

Atmospheric Dispersion Models (ADMs) are computer-based simulations used to model gas releases for enforcing regulatory compliance, designing facilities, and responding to emergencies. Because ADMs rely on complex mathematical models, they require experimental validation to ensure accuracy. Wind tunnels offer a controlled, repeatable method for gathering validation data. The Chemical Hazards Research Center (CHRC) at the University of Arkansas operates an ultra-low speed wind tunnel for this purpose. A key feature of this tunnel is its simulated Atmospheric Boundary Layer (ABL). The simulated ABL is a turbulent layer in which wind speed increases logarithmically with height from near zero at the …

Spatial And Temporal Patterns Of Bike-Share Use In A Small City: A Case Study Of Fort Smith, Arkansas, Brianna L. Buenger

Civil Engineering Undergraduate Honors Theses

Many small and mid-sized cities in the United States face ongoing transportation challenges due to limited public transit options. This can prevent residents from being able to reach essential destinations. While bikeshare systems have been widely studied in large metropolitan areas, there is limited understanding of how usage patterns vary across space, time, and trip characteristics in small-city contexts. This study addresses this gap by examining spatial and temporal patterns of bikeshare use in a small U.S. city through a case study of the Fort Smith, Arkansas, SMILIES bikeshare program. Using approximately 10,000 trips over three years, the analysis examines …

Design And Reliability Analysis Of A Radiation-Tolerant On-Board Computer System For Martian Surface Missions, Jack Ryan

Master's Theses

Space environments present complex challenges for electronic devices, perhaps most notably in the form of radiation effects; the natural protections provided by Earth’s atmosphere and magnetosphere are largely absent in deep space and extraterrestrial environments, making single-event effects (SEE) a critical concern. Although radiation-hardened components offer near-immunity to SEE, they possess tremendous drawbacks in both cost and performance. To circumvent such issues, this thesis investigates the feasibility of leveraging a commercial-off-the-shelf (COTS) device, the AMD KRIA K24 system-on-module (SOM), for use in Martian surface missions.

Detailed models were used to predict SEE rates in the system, and system-level fault tree …

Post-Vote Tampering In Nigerian Elections And The Role Of Blockchain-Enabled Electoral Systems, Ransome Chukwubuikem Enechukwu

Electronic Theses and Dissertations

Post-vote tampering during the collation and transmission of election results remains a persistent challenge in Nigerian elections, enabling manipulation of already-cast votes and weakening public trust in electoral outcomes. Existing technological interventions, including biometric voter accreditation and digital result transmission systems, improve voter authentication but do not adequately secure the post-vote result collation process. This thesis proposes a blockchain-enabled framework designed to protect the integrity of election results during the collation and transmission stages. Using a Design Science Research methodology, the study develops a permissioned blockchain framework based on Hyperledger Fabric that records polling-unit results as immutable ledger entries and …

Culturally Inclusive Usability Engineering (Ciue): A Framework For Evaluating Cultural Inclusion In Study Abroad Platforms, Louis Muhammad

Master's Theses

Study abroad programs provide students with opportunities to develop global com- petence and intercultural understanding. However, the digital platforms that support these programs often fail to communicate information that reflects the cultural and faith-based needs of diverse student populations. While prior research in Human-Computer Interac- tion (HCI) and usability engineering has explored cross-cultural and accessible design, cultural and religious considerations are rarely integrated into usability engineering pro- cesses. This thesis introduces the Culturally Inclusive Usability Engineering (CIUE) frame- work, which extends traditional usability engineering by integrating culturally informed con- siderations into the system development lifecycle. CIUE begins by identifying the …

Electrical Resilience In Water Treatment Plants: An Extreme Weather And Lightning Protection Study, Genesis Martinez

Theses and Dissertations

Water treatment plants (WTPs) are vital infrastructure systems that depend on sensitive electrical, electronic, and control equipment to ensure the continuous supply of safe drinking water and effective wastewater treatment. As global temperatures rise and climate change accelerates, the frequency and intensity of extreme weather events—such as hurricanes, flooding, and increased lightning activity—are becoming more pronounced. These events pose significant risks to the electrical resilience of water treatment facilities, often leading to power outages, equipment failures, grid instability, and prolonged service disruptions. This report explores the impacts of extreme weather, with a particular focus on lightning and electrical surges, on …

From Reactive To Predictive: A Hybrid Trust-Mediated Adoption Framework For Data-Driven Maintenance In Distributed-Authority Aviation Environments, Dustin J. Foote

International Journal of Aviation, Aeronautics, and Aerospace

Modern aviation maintenance operates within increasingly data-intensive technological environments, yet the operational integration of predictive maintenance into routine decision-making remains inconsistent across sectors. Contemporary aircraft incorporate centralized maintenance computers and condition monitoring architectures capable of fault aggregation, exceedance capture, and trend-based data collection. Although prognostics and health management research continues to advance detection and prediction methods, implementation outcomes often depend on factors beyond analytical performance alone.

This paper examines predictive maintenance adoption in distributed-authority aviation environments and argues that constraints emerge less from sensing capability than from organizational structure, decision authority dispersion, and institutional trust dynamics. For purposes of analysis, …

Digital Twin–Oriented Certification Architecture For Advanced Air Mobility, Daniel Pleffken

International Journal of Aviation, Aeronautics, and Aerospace

Advanced Air Mobility (AAM) systems introduce certification challenges associated with distributed propulsion, increasing software reliance, and tightly coupled architectures. These characteristics evolve within regulatory environments that are still adapting to emerging vehicle concepts. While digital engineering practices are increasingly adopted during system development, certification workflows remain largely document-centric, limiting lifecycle traceability and consistent reasoning about change impacts as designs and regulatory interpretations evolve. This paper proposes a Digital Twin–oriented certification architecture that integrates regulatory knowledge, system representations, Means of Compliance (MoCs), and verification artifacts within a unified model-based environment. The architecture is organized around four elements: regulatory structuring, Model-Based Systems …

An Investigation Of Data Granularity In Rag Pipelines For Personalized Medicine, Paritosh Pandey

Master's Theses

Generative AI, exemplified by large language models like the OpenAI GPT and Meta LLaMA families, can produce diverse content in response to prompts. This capability offers a promising solution to challenges in precision medicine, which seeks to tailor treatments to individual clinical profiles but often struggles with data collection, cost, and privacy concerns. By generating realistic, privacy-preserving patient data, generative AI has the potential to transform patient-centric healthcare. With such motivation, this research develops a comprehensive Generative AI pipeline emphasizing data granularity for accurate prediction of personalized treatments. The pipeline features a central Large Language Model interacting with a Machine …

Simulation Of A Buried Hydrogen Pipeline In Kansas State Soil, Sidney Hines

Master's Theses

Underground pipelines can be used to transport large amounts of pressurized hydrogen gas over several hundred kilometers. The design will be sensitive to the pipe material, diameter, and trench construction, and traffic loads above the pipe. The purpose of this paper is to conduct various geotechnical engineering analyses (seepage, stress, and slope stability) using the software program GeoStudio (version 2025.2.0) on a buried steel or FRP pipe section in a specific soil type, Harney Soil. Harney soil is of particular interest, because it is the Kansas State Soil and the analysis is for a buried gas pipe to run through …

Application Of Maritime Non-Line-Of-Sight Relay Attack On Wireless Digital Communication, Nathan Meyer

School of Computing: Dissertations, Theses, and Student Research

As wireless communication becomes increasingly prevalent, securing information over wireless channels is an ongoing challenge, especially in maritime environments where communication depends on radio links. While higher layer wireless attacks have been widely studied, lower level physical-layer relay attacks in maritime settings have received less attention. This thesis presents a simulation of a maritime relay attack in a beyond line-of-sight wireless environment for study. A three antenna communication model is developed where a legitimate transmitter sends a digital wireless signal, an attacking antenna intercepts, modifies, and retransmits the signal, and a final receiver observes both the direct and relay transmission. …

A Webcam Eye Tracking Infrastructure For Software Engineering Tasks, Zachary M. Kozak

School of Computing: Dissertations, Theses, and Student Research

Performing eye tracking utilizing commodity webcams has been explored for over a decade, but limited camera quality and sensitivity to head movements have hindered its adoption in research settings. Recent advances in consumer-grade webcams and machine learning methods present an opportunity to improve the accuracy of webcam eye tracking and extend the feasibility of studies beyond controlled laboratory environments.

Current popular webcam eye tracking methods restrict implementations to the browser and rely on continuous user interactions for calibration, limiting the kinds of studies that can be conducted. This thesis presents a feature-based gaze prediction system that incorporates eye geometry and …