Engineering Commons^™

Woodward Cuk Converter, Aditi Venkatesh, Jennifer Pereira

Honors Capstones

The purpose of this senior design project is to design and build a Cuk converter, a type of buck–boost converter. The project involves developing an analytical model and validating it through hardware testing. Cuk converters are important because they are widely used in everyday electronics, particularly in renewable energy systems such as solar power, power supplies, and electric vehicles. Their ability to increase, decrease, and reverse the polarity of voltage makes them flexible. The continuous input and output currents result in low ripple, reducing component stress and improving efficiency. To achieve these goals, simulations will be conducted using LTspice to …

Molybdenum-Doped Zinc Oxide Nanocomposite For Sustainable Photoelectrocatalytic Degradation Of Dyes And Antimicrobial Activity, Samar A. Salim

Nanotechnology Research Centre

Mo-doped ZnO nanocomposite was synthesized by using auto-combustion method. X-ray diffraction patterns of prepared nanocomposite indicated effective construction of crystalline Mo/ZnO NCs with co-existence of MoO2 and ZnO in required weight ratio. XRD results revealed also that ZnO crystallite size decreased as Mo-doping concentration increased. The direct band gap reduced from 3.309 eV of (MZ-0) to 3.258 eV of (MZ-5), demonstrating a negative correlation with Mo-doping levels. The electrocatalytic activity of Mo/ZnO NCs was assessed by their capability to degrade Indigo Carmine (IC) and Murexide (ME) dyes, and their antibacterial properties were also evaluated. The electrocatalytic (EC) degradation efficiencies for …

Development Of Hybrid Self-Cleaning Coating Using Lanthanide-Based Light Spectral Response Material To Enhance Photovoltaic (Pv) Panel Efficiency In Operational Environment, Khishn Kumar Kandiah

Student Works (2020-2029)

The efficiency of photovoltaic (PV) panels is crucial, as solar energy has become an alternative energy source that meets today’s global energy demands. Hence, dust accumulation and spectral mismatch have major effects on the efficiency of PV panels, around 20 %, but in extreme situations, this can reach up to 64 %. Therefore, initiatives are underway to address these issues, including PV cooling systems, conventional cleaning methods, and various coatings to enhance efficiency. In this work, a novel coating is fabricated with high transparency, excellent self-cleaning properties, and good spectral-modifying properties. Two types of powder composites are employed in this …

Ai Institute Summer Camp Academic Preview Webinar: Curriculum, Research, And Outcomes, Paul English Applied Artificial Intelligence Institute

Paul English Applied Artificial Intelligence (AI) Institute Publications

This webinar presents an academic preview of the AI Institute Summer Camp hosted by the Paul English Applied Artificial Intelligence Institute at the University of Massachusetts Boston. The session introduces the program’s curriculum, structure, and student outcomes, providing insight into a hybrid learning model that combines faculty-led lectures, hands-on labs, and guided project development. The webinar highlights the program’s five-week structure, covering topics such as machine learning, neural networks, computer vision, speech and language processing, and generative AI. Participants learn how students engage in real-world AI applications, complete portfolio-ready projects, and develop research and presentation skills. This session is designed …

Equipping Biomedical Engineering Students With Clinical Needs Identification Skills: Insights From A Clinical Immersion Course, Lauren E. Edmunds

Biomedical Engineering Undergraduate Honors Theses

A major goal of biomedical engineering is the development of novel and innovative medical technology that advances and improves healthcare outcomes. An essential component of medical device design is identifying the clinical needs of patients and healthcare providers and applying engineering solutions to meet these needs. Our biomedical engineering department has developed a clinical and industry immersion course, which exposes students to the environment in which physicians and patients practice and engages students in this needs identification process. This study evaluates the impact of clinical immersion on undergraduate biomedical engineering students' confidence and perceived ability to identify and define unmet …

Designing Enhanced Nonlinearity In Plasmonic Devices With Epsilon-Near-Zero Films, Kevin Tran Le

Electrical Engineering and Computer Science (MS) Theses

The growing demand for energy-efficient optical information processing motivates compact nonlinear photonic devices that can operate at low power. Silicon photonics is a mature platform for linear optical functions, but nonlinear operation remains challenging because of its weak Kerr response, two-photon absorption at telecommunication wavelengths, and limited compatibility with deeply subwavelength plasmonic confinement. This thesis computationally investigates epsilon-near-zero thin films integrated into plasmonic waveguide architectures as a route toward stronger light–matter interaction in compact nonlinear devices.

Two waveguide geometries are examined: a hybrid metal-insulator-metal plasmonic slab waveguide incorporating an ultrathin indium tin oxide epsilon-near-zero layer (5–50 nm), and a dielectric-loaded …

Reflective Analysis Of Industrial Engineering Leadership Skills Applied In Being A Capstone Team Leader, Sarah Nesmith

Industrial Engineering Undergraduate Honors Theses

This paper presents a reflective analysis of leadership skills that I, Sarah Nesmith, have acquired and applied as an honors student serving as a capstone team leader within the Industrial Engineering program at the University of Arkansas. My senior capstone project is in partnership with Walmart’s Transportation and Optimization Department and focuses on identifying the root and contributing causes of empty miles (miles driven without freight on a truck) and exploring backhaul opportunities. The ultimate goal is the development of a tool or method that can identify these opportunities to save money while maintaining service level. As the appointed team …

A Multi-Objective Optimization Framework For Equitable Stormwater Management In Urbanizing Rural Communities, Harry L. Wilson

Industrial Engineering Undergraduate Honors Theses

Due to limited technical and financial resources, urbanizing rural communities often face growing stormwater management challenges while undergoing rapid development. This thesis proposes a mixed-integer linear programming (MILP) framework that integrates topography-driven stormwater flow behavior, infrastructure placement constraints, and multiple planning objectives to support cost-effective stormwater infrastructure decisions. Our model accounts for budget constraints, gravity-driven surface water flow, infiltration capacity, and spatial contiguity requirements to determine optimal pond placements that balance flood reduction and implementation costs. A synthetic discretized grid representing a small municipality is used to demonstrate model behavior under varying rainfall and topographic conditions. Results demonstrate the framework's …

Multi-City Travel Routing Tool: Reducing Travel Costs And Time Spent Planning Using Apis, Trey R. Merreighn

Industrial Engineering Undergraduate Honors Theses

Travel planning is a time-consuming and ever-changing problem that can diminish the travel experience and greatly increase expenditure, if not done correctly. It is important to have an easy travel planning experience so you can enjoy the travel experience more and not waste time where it is not needed. This thesis aims to minimize the costs and time spent on travel planning using APIs and simple optimization models, creating a travel planning tool. This travel planning tool was developed in Java with the main API being Amadeus, this was combined with a greedy best-permutation heuristic to create the main route …

A Maintenance-Aware Machine Learning Framework For Network-Level Highway Pavement Condition Prediction, Jin Hwan Kim, Guk Gon Song, Youngguk Seo

Faculty Articles

This study develops and validates maintenance-aware machine learning models for predicting the Highway Pavement Condition Index (HPCI) on the Korean expressway network. Multiple regression and tree-based models were trained and tested using the pavement condition surveys archived in the Highway Pavement Management System (HPMS). A stacking regressor that integrates random forest, gradient boosting, and extreme gradient boosting as base learners exhibited the most robust predictions. Performance metrics indicated that the stacking ensemble achieved a mean absolute error of 0.21, a root mean square error of 0.31, and a coefficient of determination exceeding 0.73 on the testing dataset. Also, the residuals …

Analysis Of Potential Alkali Reactivity Of Aggregates In Arkansas, Brigita Dowling

Civil Engineering Undergraduate Honors Theses

Alkali Silica Reaction (ASR) is a deleterious chemical reaction in concrete that leads to the deterioration of concrete structures. This reaction occurs between minerals present in aggregates and alkalis in the cement, and produces a gel-like substance called alkali silicate gel. Gradually, these gels absorb water from the environment and expand, leading to internal stresses in the concrete. This damage results in expansion, cracking, and deformation, reducing the strength and durability of the concrete significantly. While this damage appears minor initially, eventually they can lead to the need for costly repairs or replacement of the concrete. ASR has been observed …

Chloronitramide Anion Yields During Monochloramine Formation: Impact Of Reagent Addition Order, Ph, And Mixing, Barrett E. Johnson, Julian L. Fairey, Jason A. Thornhill

Civil Engineering Undergraduate Honors Theses

Chloronitramide anion was recently identified as a decomposition product of inorganic chloramines. Tap‑water concentrations > 300 μg/L reported in a recent study prompted this investigation of chloronitramide anion during monochloramine formation under conditions relevant to drinking water treatment plants. As monochloramine is formed by mixing free chlorine with free ammonia, the impacts of pH, reagent mixing intensity, and reagent addition order were assessed on monochloramine and chloronitramide anion yields. Jar tests were conducted in distilled deionized water at target pH levels of 7 and 9 under rapid, slow, and no‑mixing conditions, with alternating reagent order addition and a target monochloramine dose …

Uav Blast Load Characterization For Structural Design, Jalee Grace Spain

Civil Engineering Undergraduate Honors Theses

As the use of drones, or UAVs, increases, so does the risk of collision with infrastructure. When drones collide with a building, an impact or blast load is applied. Using current literature and structural analysis, a load case can be defined for a blast load induced by a drone.

Extremum Seeking Compensation And Quantification Of Position Sensor Offset Error In Speed-Controlled Permanent Magnet Synchronous Motors, Tessa Biondo

Masters Theses

Position sensor offset errors present a persistent challenge in speed-controlled permanent magnet synchronous motor drives operating under field-oriented control. Even small, constant offsets in the measured rotor position can reduce torque effectiveness, requiring increased current and voltage demand to maintain the commanded speed and resulting in degraded speed regulation performance across a range of operating conditions. These effects are particularly problematic in speed-controlled systems, where speed loop dynamics cause increased electrical effort and limit overall performance. Many existing detection and compensation approaches are either dependent on the system model, require offline calibration, or are primarily designed for torque-controlled operation. This …

The Expectation Of Pain: Effects On Threshold, Tolerance, And Perception, Emma Paulus

Mechanical Engineering Undergraduate Honors Theses

Brain activity in pain-related regions of the cortex is thought to be influenced by interactions between expectations and incoming sensory information. However, the subjective experience of pain based on expectation has not been thoroughly explored. By changing visual and auditory cues to set expectation levels, a relationship between unconscious expectation of pain and actual sensory pain experienced was characterized. With IRB approval, volunteers were randomly and blindly grouped into low and high pain expectancy groups. Each group completed a survey about initial pain expectations before the muscle stimulation tolerance test, followed by a survey about actual pain perception after the …

A Forecasting Framework For Distribution Center Capacity Utilization: An Applied Industry Study, Jordan J. Shortt

Data Science Undergraduate Honors Theses

This project develops and evaluates a predictive modeling framework for forecasting distribution center capacity utilization at Company Y, with monthly forecast horizons up to one year. Motivated by the operational challenges of seasonal demand volatility, promotional cycles, and the absence of a formally defined capacity metric, the study first constructs a historical capacity utilization measure from raw warehouse management system data — reconciling item volumes, location dimensions, and utilization factors across all DCs — which serves as the target variable for all modeling work. Four models are developed and evaluated against a naïve seasonal baseline: SARIMA, LightGBM, LSTM, and a …

Small-Scale Analog Spiking Neural Network: Design And Simulation Of An Analog Deep Neural Network, Lucas Hogue

Electrical Engineering and Computer Science Undergraduate Honors Theses

A small-scale analog schematic of a spiking neural network (SNN) is designed and demonstrated through the analog design environment (ADE) within Cadence Virtuoso. An SNN is a type of neuromorphic system that utilizes components mimicking the function of the neurons and synapses found in biological neural networks. The SNN designed in this project is composed of four layers: one input layer, two hidden layers, and one output layer. The inclusion of more than one hidden layer classifies the network as “deep” and increases the network’s efficiency at handling data with increased complexity. The SNN categorizes inputs by producing a set …

​Autonomous Agentic Orchestration For Physics-Aware Scientific Discovery: An Integrative Multimodal Framework For 2d Material Characterization​, Sankalp Pandey

Electrical Engineering and Computer Science Undergraduate Honors Theses

The advancement of next-generation semiconductor and quantum technologies relies on the scalability of the fabrication of two-dimensional (2D) van der Waals heterostructures. However, this process is severely bottlenecked by characterization workflows. Optical microscopy provides high-throughput imaging of 2D material flakes, but lacks the explicit physical priors required for the discernment of sub-nanometer thickness variations, such as distinguishing monolayers from bilayers. The use of computer vision models to automate the localization and characterization process of the flakes was proposed. As a part of this effort, we develop QuantumFlake, an open-source framework to streamline the integration and deployment of computer vision models …

Bayesian Assembly Tool For Intelligent Digital Twin Selection, Shishir Sharma

All Theses

Digital twins can be used for system performance optimization, health monitoring, predictive maintenance, and investigating system anomalies. A ground vehicle digital twin may be assembled using representations of the subsystem models (tires, suspension system, powertrain, etc.) of different fidelity. Lower fidelity Digital Twins have relatively simpler design and physics, hence are generally computationally less expensive, but may not represent the physical system accurately. On the contrary, higher fidelity Digital Twins are generally more precise in their ability to represent the physical system, but due to complexity, are usually computationally more demanding. This thesis describes the application of Bayesian Classification within …

Implementation Of A Local Llm Serving System For Agentic Ai, Zhiheng Ni

All Theses

This thesis presents a system that allows large AI models to run directly on personal devices instead of relying on cloud servers. Recent advances in artificial intelligence, especially large language models (LLMs), have made it possible to build powerful applications such as chatbots, coding assistants, and intelligent agents. However, most of these systems run in the cloud, which raises concerns about privacy, latency, and cost.

To address these issues, this work develops a local AI serving system that runs efficiently on a specialized hardware component called a Neural Processing Unit (NPU). The system provides a unified interface that supports multiple …

Quantifying The Value Of Adaptability: Bridging Real Options Analysis And Adaptable Building Design, Miranda Grice

All Dissertations

As the demands of the built environment continually evolve, buildings are expected to meet changing occupancy needs, or otherwise they become obsolete. Despite positive research on the benefits of adaptable building design, there is a knowledge gap regarding the long-term economic benefits of these designs. Practical methods are needed to determine if premium costs associated with adaptable designs are justified by the economic benefits inherent in adaptability. Therefore, this dissertation provides a discussion on the application of the financial theory of options analysis to the design of adaptable buildings. Additionally, a model and accompanying tool are presented as a solution …

Turning Down The Heat: Fine-Tuning Tempo-Modified Nanocellulose And Emim-Ac Ionic Liquid Membranes For Kidney Dialysis, Olivia Reid

Chemical Engineering Undergraduate Honors Theses

TEMPO modified nanocellulose membranes are utilized across various laboratory and industrial applications from protein purification to advancements in kidney dialysis. This study investigates the effect of varying coagulation temperatures on the morphology and transport properties of these membranes to enhance their performance for targeted filtration. It was hypothesized that higher temperatures would accelerate the solvent-nonsolvent exchange during phase inversion, resulting in larger pore structures. Conversely, lower temperatures were expected to slow solvent diffusion, yielding smaller, more uniform pores. The membranes[JH1]  were synthesized using 2,2,6,6-tetramethylpiperidinyl-1-oxyl (TEMPO) to improve selectivity and antifouling characteristics. Scanning electron microscopy (SEM) served as the primary …

Strengthening Kidney Dialysis One Membrane At A Time: Enhancing Tempo-Oxidized Nanocellulose And Ionic Liquid Membrane Strength Through The Variation Of Cosolvents, Bailey M. Butler

Chemical Engineering Undergraduate Honors Theses

Chronic kidney disease occurs when the kidneys lose the ability to effectively filter the blood, which causes waste build up. End-stage kidney disease (ESKD) is the most severe case of kidney disease and requires either dialysis or a kidney transplant. Hemodialysis, the most common form of dialysis, is an extremely time-intensive and physically burdensome process that is currently limited by membrane performance. The polysulfone (PSf) membranes that are widely used for dialysis today have many limitations, including fouling, toxin rejection, and essential protein loss. Recently, new membranes made from TEMPO-Oxidized nanocellulose dissolved in 1-ethyl-3-methylimidazolium acetate (EMIM-Ac) have shown promising characteristics, …

Shooting For The Stars: Stem Outreach Strategies Between 2nd And 7th Grade, Paige Miller

Chemical Engineering Undergraduate Honors Theses

Engineering and planetary science outreach programs are increasingly important as industries and research organizations face growing demand for STEM professionals. Despite the importance of these fields, many students receive little exposure to engineering careers during their early educational experiences. This honors thesis examines the effectiveness of interactive STEM outreach presentations designed for elementary and middle school students. Specifically, this study evaluates outreach activities centered on chemical engineering applications and the NASA M2M CO₂ regeneration project for Martian environments.

Two student age groups participated in this study: 2nd grade students at Butterfield Elementary School and 7th grade students at Woodland Junior …

Optimizing College Food Pantry Locker Systems Through Simulation Techniques, Jacob W. Holmes

Industrial Engineering Undergraduate Honors Theses

Food insecurity affects 10.5% of households in the United States. Among those affected, college students are a group with increasing food insecurity. Through novel food pantry order methods, such as locker order systems, some effects of college food insecurity can be alleviated. The Jane B. Gearhart Full Circle Food Pantry (FCFP) at the University of Arkansas implemented a locker system, beginning in the Fall of 2020. There is a lack of investigation into locker management policies for pantries, such as how much time clients should be allowed to pick up orders after they are placed in lockers, how many lockers …

Domain-Specific Design On Fpga And Npu For Scientific Computing And On-Device Llm Inference, Miaoxiang Yu

All Dissertations

High-performance computing (HPC) is changing rapidly as scientific simulations and large language model (LLM) workloads push the need for higher performance under tight power and memory constraints. Conventional platforms such as CPUs and GPUs accelerate computation through instruction-driven parallelism, relying on multithreading, SIMD, and SIMT execution, but increasingly encounter scalability limits imposed by the power and memory walls. In contrast, Field-Programmable Gate Arrays (FPGAs) and Neural Processing Units (NPUs) offer a high-efficiency alternative through dataflow-oriented architectures that exploit deep pipelining and customized memory hierarchies to reduce data movement. However, the performance potential of these spatial accelerators remains largely unrealized when …

Physical And Optical Properties Of The Germanium-Arsenic-Selenium Glass Forming Region For Precision Glass Molding And Infrared Optics, Peter F. Wachtel Ii

All Dissertations

The growth and advancement of infrared optical systems for thermal imaging, multi-band imaging, hyperspectral imaging, medical diagnostics, and chemical sensing are pushing the material science community to better understand existing materials while also developing new materials. Additionally, the thermal imaging market continues to grow, and system designers are continually being asked to reduce size, weight, and power while reducing costs (SWaP-c). Market growth has shifted optics manufacturing towards higher volume processes such as precision glass molding, but this does require most materials to be recharacterized due to property changes resulting from the process. Affecting the SWaP-c requirements, manufacturing tolerances are …

Erratum For "Soil Freezing Characteristic Surface For Partially Frozen Soils", Antai Dong, Xiong Zhang, Ming Xiao

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The following corrections should be made to "Soil Freezing Characteristic Surface for Partially Frozen Soils" by Antai Dong, Xiong Zhang, and Ming Xiao, https://doi.org/10.1061/JGGEFK.GTENG -13924: In the third sentence of the Abstract, the value for suction when completely dried is incorrect. It should be 106 kPa. The label at the end of the suction axes in Figs. 1(a) and 2 is similarly inaccurate. Corrected versions of Figs. 1 and 2 are provided herein. To preserve the published version of record, these details have been corrected only in this erratum. (Figure Presented)

Adsorption Of Pfas On Bridged Functionalized Organosilica Materials, Elisha Lawerh Kabutey

Electronic Theses and Dissertations

PFAS are hazardous contaminants that have a devastating impact on human health and the environment. Their hazardous nature has led to the development of various adsorption methods for removing these contaminants from water sources. In this study, functionalized organosilica materials were synthesized from bis[3-(trimethoxysilyl)propyl] amine using the sol-gel method. The surface amino groups of the organosilica were converted into amine hydrochloride groups. Their adsorption properties were evaluated using salts of perfluorooctanoic acid, perfluorooctanesulfonic acid, and perfluorobutanesulfonic acid. Results showed excellent adsorption capacity of the materials. Adsorption of PFAS leads to particle agglomeration and flotation of the spent material. A column …

A Critical Review And Methodological Recommendations For Life Cycle Assessment Of Electrochemical Co₂ Mineralization, Dennis Dadzie, Kwame Awuah-Offei

Mining Engineering Faculty Research & Creative Works

Purpose: While researchers have relied on life cycle assessments (LCAs) to make claims about the environmental benefits of electrochemical CO₂ mineralization, no systematic review literature exists that synthesizes what we know about the LCA of electrochemical mineralization. This review aims to synthesize established knowledge on the LCAs of electrochemical CO₂ mineralization studies, identify research gaps and discuss challenges, and suggest guidelines for applying the ISO 14040/14044 LCA methodology in this sector. Methods: This paper undertook a comprehensive review of LCA studies on CO₂ mineralization with emphasis on electrochemical mineralization. We utilized relevant keywords based on the theme to search in …