Engineering Commons^™

Enhancing Operational Efficiency Of Paratransit Services Using Predictive Models, Troyee Saha

Civil Engineering Dissertations - Archive

Paratransit services play a vital role in supporting the mobility of older adults and individuals with disabilities, yet they experienced major disruptions during the COVID-19 pandemic and continue to face ongoing operational issues such as trip cancellations. This dissertation explores these challenges through three distinct analyses using data from Arlington, TX. The first chapter investigates how COVID-19-related factors (policies, cases, and vaccination) and socio-demographics influenced paratransit usage from 2019 to 2021. Applying SARIMAX and Poisson regression models, the study finds a substantial drop in ridership—41% in 2020—and a shift toward essential medical travel. It also reveals that restrictive policies, such …

Development Of Supervised Machine Learning-Based Life-Cycle Cost Estimation And Prediction Models For Comparative Sewer System Rehabilitation Using Open-Cut And Trenchless Cured-In-Place Pipe Methods, Gayatri R. Thakre

Civil Engineering Dissertations - Archive

Aging wastewater infrastructure in the United States demands renewal strategies that balance cost-effectiveness, sustainability, and minimal social disruption. Conventional open-cut pipeline installation (OCPI) involves extensive excavation and restoration, whereas trenchless alternatives such as Cured-in-Place Pipe (CIPP) Renewal Technology offer reduced surface disturbance and environmental impacts. However, existing studies primarily focus on Construction Costs (CC), neglecting integrated life-cycle evaluations that also account for Environmental Costs (EC) and Social Costs (SC).

The primary objectives of this research are to develop supervised machine-learning (ML) models to estimate and predict CC in 2025 US dollars (USD) per linear foot of OCPI and CIPP Renewal …

Development Of A Drone-Assisted Pavement Management Framework Based On The Pavement Condition Index For University Parking Lots, Omesh Pasuluru

Civil Engineering Theses - Archive

Efficient pavement management is essential for keeping university parking lots in good condition. At the University of Texas at Arlington, parking areas experience heavy use and environmental wear, which can cause damage if not addressed early. Traditional methods for assessing pavement conditions are time-consuming, interrupt daily activities, and are expensive. Hence, there is a need for better solutions. This study introduces a drone-based pavement management approach that uses the Pavement Condition Index (PCI) system. The PCI is a numerical scale from 0 to 100 that rates pavement quality based on surface condition. A high PCI score (85-100) indicates the pavement …

Structural Performance Of High-Rise Rc Buildings With Sfrc Columns And Shear Walls Subjected To Seismic Loading, Ali Azzawi

Civil Engineering Theses - Archive

To investigate the seismic performance of high-rise RC buildings with steel fiber reinforced concrete (SFRC) columns and shear walls, a detailed numerical analysis was established using RISA-3D software on twelve-story RC buildings subjected to earthquakes. The variables included in this research are steel fiber volume fraction (SFVF), number of stories with SFRC columns and shear walls, and concrete strength grade. The mechanical properties of the concrete for each mix are evaluated experimentally. Three types of concrete mix designs were performed in the Civil Engineering Laboratory Building (CELB) using different dosages of steel fibers (0, 25lb/cy, and 70lb/cy). The properties of …

Characterization Of Municipal Solid Waste Using Machine Learning Based Imaging And Chemical Analysis, Enyonam Ahadzi

Theses and Dissertations--Biosystems and Agricultural Engineering

According to the U.S. Department of Energy’s 2023-billion-ton report, the United States generates nearly 300 million tons of municipal solid waste every year. More than 50% of that waste is underutilized and ends up in landfills. This poses serious public health and environmental risks. But beyond the environmental and health implications, this is also a wasted opportunity. The U.S. Energy Information Administration estimates that, for every 100 lbs of waste we throw away, about 85% can be used as fuel or for electricity generation. However, its complex and heterogeneous nature poses challenges for efficient sorting and valorization in waste to …

Valorizing Municipal Solid Waste For Sustainable Aviation Fuel And Polyhydroxyalkanoate Bioplastics: Pyrolysis And Microbial Pathways, Emon Das

Theses and Dissertations--Biosystems and Agricultural Engineering

The escalating global burden of municipal solid waste (MSW), projected to reach 3.88 billion tons annually by 2050, calls for innovative valorization strategies to mitigate environmental impacts and promote a circular bioeconomy. This thesis investigates the conversion of MSW into two high-value products: sustainable aviation fuel (SAF) and polyhydroxyalkanoate (PHA) bioplastics. Chapter one presents comprehensive physicochemical characterization and pyrolysis-GC/MS analysis of MSW feedstocks. The physicochemical results reveal that densification enhances handling and storage properties, while pyrolysis-GC/MS analysis indicates that plastic-rich MSW streams produce bio-oils with favorable hydrocarbon profiles suitable for SAF production, potentially contributing to decarbonization efforts in the aviation …

A Design And Analysis Of Computer Experiments Approach To Water Distribution Network Seismic Rehabilitation Optimization, Uthman Abiola Kareem

Industrial, Manufacturing, and Systems Engineering Dissertations - Archive

Water is an essential part of human life. However, there are critical infrastructures that enable water availability in communities and homes. One of such is a water distribution network. Water distribution network performance depends on its reliability, which could be threatened by external agents like earthquakes. When earthquakes occur, they cause damages on some pipes within the distribution network and this limits performance of water distribution network. While earthquakes cannot be prevented, effective maintenance intervention may reduce the impact of earthquakes on water distribution networks. In order to develop an effective maintenance plan, researchers approach it in different ways. However, …

Analysis Of Crowd Logistics Networks Using Agent-Based Models, Preetam Kulkarni

Industrial, Manufacturing, and Systems Engineering Dissertations - Archive

Crowd logistics is a system in which an online platform connects a group of non-professional couriers (crowd/carriers), who use their under-utilized resources to offer delivery service to other individuals or businesses (senders) for a fee. While crowd logistics platforms have the potential to offer more flexible and responsive delivery services for much lower rates than traditional logistics providers, it is difficult for platforms to be successful as it is challenging to meet carriers’ and senders’ expectations. Crowd logistics has been applied in the context of food and grocery delivery, parcel pickup and drop-off services and last-mile delivery, however, it has …

Updating Rainfall Zones And Intensities In Nebraska For Improved Design Of Non-Bridge-Sized Drainage Structures, Rezaul Mahmood, Tirthankar Roy, Chanchal Gupta, Kanak Kanti Kar, William Sorenson

Nebraska Department of Transportation: Research Reports

This study assesses the effectiveness of precipitation zones and Intensity-Duration-Frequency (IDF) curves used by the Nebraska Department of Transportation (NDOT) for designing drainage structures. Twenty stations were selected for the analysis of revised IDF curves out of forty-two stations. Datasets have been considered from the National Center for Environmental Information (NCEI). By Comparing the new curves with existing ones, the study efforts examine the frequency, duration and severe rainfall. The results show that the IDF curves for various zones and stations varied noticeably from one another. Also, noticed that Zone A and B shows lower rainfall intensities in short to …

Enhancement Of Mechanical, Structural, And Electrical Properties In Advanced Composites And Vat Photopolymerized 3d Printing Nanocomposites, Poom Narongdej

CGU Theses & Dissertations

Advanced composites have gained significant attention across various industries, including aerospace, automotive, clean energy, and healthcare, owing to their exceptional mechanical properties and versatility. Fiber-reinforced polymer (FRP) composites, particularly those reinforced with carbon fibers, are extensively used as structural materials in spacecraft, aircraft, high-performance vehicles, and wind turbines due to their high strength-to-weight ratios, stiffness, durability, and tailorable mechanical characteristics. In healthcare, the advent of additive manufacturing (3D printing) has expanded the utility of advanced composites, enabling precise customization of components to meet patient-specific needs while offering design flexibility and ease of fabrication. Despite these advantages, several challenges hinder the …

Investigation Of Aluminum Hollow Shapes Subject To Torsion, Nora Frederick

Honors Theses

This research investigates the torsional strength of hollow aluminum shapes, specifically fairly stocky square and circular cross-sections made from 6061-T6 alloy. A total of six cross-sections were tested, with six specimens for each cross-section, resulting in 36 tests. Torque and angular deformation data were recorded for each specimen to determine the torque corresponding to full- yield of the cross-section. Additionally, Strand7 finite element models were created to simulate the experimental results and assess whether the torsional behavior could be accurately replicated through numerical analysis. This allows for future research to be conducted using Strand7 or similar finite element software.

The …

How Many Passes Does It Take? An Investigation To Determine The Optimal Number Of Liposome Extrusion Cycles, Kasey Piper

Honors Theses

Liposomes are lipid-based nanoparticles with significant applications in drug delivery and membrane research. One of the most common methods for fabricating liposomes of specific sizes is membrane extrusion, where liposomes are passed through porous membranes to reduce their size. The precise number of passes needed and the factors influencing this process remain unclear. This thesis investigates the relationship between the number of passes through a track-etched polycarbonate membrane and size and lamellarity of extruded liposomes with a focus on lipid type (DOPC, DMPC, Soy PC), membrane pore size (50, 100, 200, 400 nm), and the effect of freeze-thaw cycling. To …

Qualitative Interview Coding, Caroline M. Moore

ENGS 15.11: Design and Education

This lesson introduces undergraduate students to rigorous thematic analysis as a tool for gaining insights from qualitative interviews. Aimed at students with some familiarity in Design Thinking, it emphasizes the role of interviewing in understanding user experiences and informing human-centered research. This might be the first lesson in a multi-lesson sequence, allowing the next lesson to go deeper into insights of what design researchers gather from their thematic coding. Through a mix of lecture, individual coding, and small-group coding, students learn to distinguish between inductive and deductive coding and apply these methods to sample interviews. The lesson fosters active learning …

Mangroves: A Lesson On Modeling Changing Shorelines, Willa Skye

ENGS 15.11: Design and Education

This lesson is an overview of storm barriers, specifically mangroves and how they maintain shorelines. It is meant to offer a visual experience of coastline protection and provide a background for deeper understanding about intertidal zones and their conservation. Students will spend time creating a solution to a flooding problem by making a mock coast and storm barrier. To wrap-up the lesson, students will pair up, then reflect on their model and then individually write or draw their takeaways.

Using Design Thinking To Upcycle, Lily Chabica

ENGS 15.11: Design and Education

This 60-minute lesson introduces the power of design thinking as a tool for sustainability. Through short discussions, visual examples, and a hands-on “Trash Island” design challenge, students will explore how creativity can transform waste into value. The session combines theory (understanding upcycling vs. recycling) with active practice (building prototypes from found materials). By the end, students will connect environmental responsibility to personal agency. They will realize that design can drive everyday impact.

Confronting Indecision, Lane Allison Murray

ENGS 15.11: Design and Education

This course aims to increase students' understanding of indecision and how to confront it. The class provides insight into how the fear of the unknown holds people back from making decisions and about understanding one's values as a means to combat indecision. Students and teachers alike explore instances of indecision and evaluate their own impulses & thought processes by reflecting on the deeper reasons for their choices. Students will increase their comfort level of asking themselves and their peers questions about the values that guide them and, in doing so, strengthen their relationships with themselves and others.

Smart Qos-Aware Resource Management For Edge Intelligence Systems, Minoo Hosseinzadeh

Theses and Dissertations--Computer Science

There are several definitions for Smart Cities. One common key point of these definitions is that smart cities are technologically advanced cities which connect everything in a complex urban environment including infrastructure, information, and even people to cope with the crucial problems linked with the urban life such as traffic, pollution, city crowding, health, and poverty. Central to this vision are the Internet of Things (IoT) and Big Data, where interconnected devices with sensors collect vast amounts of data for informed decision-making. However, the rapid expansion of IoT devices challenges efficient data processing while meeting diverse Quality-of-Service (QoS) requirements; for …

Optimization, Machine Learning, And Networking Solutions For Cyber-Physical Systems, Xu Tao

Theses and Dissertations--Computer Science

Cyber-Physical Systems (CPS) represent a transformative paradigm that integrates sensing, computation, and actuation through networked systems to enable intelligent, context-aware applications across various domains. Despite their growing potential, CPS still face critical challenges, particularly in maintaining reliable, low-latency communication and efficient data processing in resource-constrained and dynamic environments. These challenges are further magnified in rural or remote deployments, where traditional network infrastructure is often unavailable or unreliable. This dissertation addresses these challenges through the development of optimization and inference algorithms that enhance network performance in Software-Defined Networks (SDN), using techniques such as reinforcement learning and network tomography for efficient routing. …

A Finite Volume-Based Approach For Modeling Hyperbaric Oxygen Therapy For Healing Chronic Wounds, Cade M. Layser

College of Graduate Studies: Theses & Dissertations

The current number of people in America with diabetes is approximately 38.4 million, that population is expected to rise to 54.9 million by 2030. Chronic wounds, which are characterized by impaired or stalled healing, are commonly associated with diabetes. These wounds if not treated properly can cause significant complications such as sepsis, infection, and gangrene which can lead to limb amputation or death of the patient. Limb amputations can be a large financial burden and significantly reduce the patient’s quality of life. The timely and efficient treatment of chronic wounds is essential to prevent adverse patient outcomes. Hyperbaric Oxygen therapy …

Multiphysics Modeling Of Solid Oxide Fuel Cells For Gradient Minimization And Inductive Loop Analysis In Impedance Spectroscopy Using Machine Learning-Based Microstructural Property Estimation, Muhammad Usman Khan

College of Graduate Studies: Theses & Dissertations

Solid oxide fuel cells have significant advantages in renewable energy utilization due to their high efficiency, fuel flexibility, and low emissions. However, despite the numerous efforts of technology, thermal and current density gradients and impedance behavior fluctuations are still causing performance degradation. A combined computational framework that integrates machine learning and three-dimensional Multiphysics modeling is needed to investigate and optimize the performance of solid oxide fuel cells. A machine learning model, trained on synthetic microstructure data by percolation analysis, is used to predict important microstructural parameters like triple phase boundary density and geometric tortuosity. These are then employed in a …

Photocatalytic Performance Of Ba₀.₈Ca₀.₂Tio₃ Composite For Norfloxacin Removal In Aqueous Solutions, Raj Mohanty, Swayam Aryam Behera, Asima Subhadarshini, Binita Nanda, P. Ganga Raju Achary

Journal of Metals, Materials and Minerals

This study investigates the degradation of norfloxacin using a Ba0.8Ca0.2TiO3 (BCTO) perovskite composite synthesized via a simple solid-state method. Variety of characterization techniques, including photoluminescence spectra, powder X-Ray Diffraction, UV-Vis Diffuse Reflectance Spectra, FE-SEM and Fourier-Transform Infrared spectra confirm the structural and optical properties of BCTO. Electrical characterization further elucidates its conductive properties. The BCTO composite demonstrates an impressive 87% degradation rate of norfloxacin, attributed to its reduced electron-hole recombination, enhanced light harvestation, and improved charge carrier mobility. Kinetic studies indicate that the degradation process adheres to a pseudo-first-order model, with BCTO outperforming both pure BaTiO3 and conventional photocatalysts. These …

Improving The Mechanical Performance Of 45s5 3d Scaffolds Through The Particles Of Barium Titanate Ceramics, Surirat Yotthuan, Usanee Pantulap, Nuttawan Sawangboon, Ornuma Tungsanguan, Ekarat Meechoowas, Kansiree Kaewmorakot, Nathaporn Uthaichai, Theerachai Bongkarn

Journal of Metals, Materials and Minerals

Bioglass® 45S5 is widely used in bone tissue engineering due to its excellent bioactivity. However, its low mechanical strength remains a major limitation. In this study, 25 wt% barium titanate (BaTiO3; BT) was incorporated into 45S5 scaffolds to improve mechanical performance and modulate bioactivity. The 3D scaffolds were fabricated using the foam replication method and exhibited interconnected porosity, with average pore sizes of 471 ± 94 μm (45S5) and 598 ± 58 μm (45S5/BT25), closely resembling human bone. The addition of BT increased the density and compressive strength of the scaffolds to 2.89 ± 0.18 g∙cm‒3 and 2.0 ± 0.2 …

Synthesis And Characterization Of Silica Nanoparticles From Solar Panel Glass Cullet, Pathomporn Ussawanawachat, Nithiwach Nawaukkaratharnant, Apirat Theerapapvisetpong

Journal of Metals, Materials and Minerals

The rapid growth of solar energy as a renewable resource has led to a significant increase in discarded solar panels. Recycling their glass components, especially fine cullet fragments, remains a major challenge due to impurity levels and processing limitations. This study proposes a sustainable approach to recycle solar panel glass cullet into high-purity silica nanoparticles using alkali fusion followed by acid precipitation. Process conditions including cullet to NaOH ratio, fusion temperature, and surfactant addition were optimized. The highest silica yield of 60.26% was achieved at a 1:1.4 cullet to NaOH ratio and 500℃. Polyethylene glycol (PEG 1000) was used as …

Laser Ablation Behavior And Ablation Threshold Of Entropy-Controlled Perovskite Coatings, Shuo Wang, Junyang Lu, Mengqing Zhang, Jiayi Zheng, Tong Zhang

Journal of Metals, Materials and Minerals

The protection threshold of laser ablation resistant materials lags behind the development of laser power density. Single-functional laser ablation resistant materials can no longer meet the practical needs. High-entropy perovskites with infinite chemical composition, tunable bandgap structure, and efficient thermal management capabilities provide new ideas for developing novel high-reflectivity and low-thermal-conductivity multifunctional laser ablation resistant materials. Herein, leveraging these unique advantages of high-entropy perovskites in optics and thermodynamics, four entropy-controlled perovskite coatings, Ba(Zn1/2Ta1/2)O3 (BZTO), Ba(Zn1/3Ta1/3Nb1/3)O3 (BZTNO), Ba(Zn1/4Ta1/4Nb1/4Ti1/4)O3 (BZTNTO) and Ba(Zn1/5Ta1/5Nb1/5Ti1/5Zr1/5)O3 (BZTNTZO) are designed. Through time-dependent laser ablation experiments, the optical and thermal properties are comprehensively evaluated. And laser ablation behavior …

Downstreaming Of Natural Materials Huta Ginjang Quartz Sand Doped With Nd2o3 For Laser Medium Application, Juniastel Rajagukguk, Jakrapong Kaewkhao

Journal of Metals, Materials and Minerals

The QSBoBa glasses with chemical formula 10 Quartz sand + (50-x) B2O3 + 10BaO + 30Na2O + xNd2O3 (x = 0, 0.5, 1, 1.5, and 2 mol%) were prepared by a conventional melt-quenching technique. The successfully fabricated glass samples will be analyzed based on their physical, structural, optical and luminescent properties. The XRD and FTIR spectra have been included to observe the complete structural properties. Optical absorption spectra revealed several characteristic transitions, with a prominent hypersensitive transition 4I9/2→4G5/2 at 584 nm, indicating an increasing asymmetry and disorder at higher Nd3+ concentrations. The photoluminescence emission spectra demonstrated strong radiative transitions of …

Crack Development Of Electroplated Niw Alloys And Their Wettability And Tribological Properties, Jidsucha Darayen, Suwat Ploypech, Martin Metzner, Claudia Beatriz Dos Santos, Petch Jearanaisilawong, Yuttanant Boonyongmaneerat

Journal of Metals, Materials and Minerals

This study investigates how sodium tungstate concentration (20–46 wt.%) and current density (40–60 A/dm²) affect the microstructure, wettability, mechanical properties, and tribological behavior of electrodeposited Ni-W coatings. Results show that increasing current density markedly raises crack density (from <100 to >400 cracks/cm²), while tungstate concentration has minimal effect. XRD confirms Ni-W solid solution formation, with higher tungsten content refining grains and increasing hardness—peaking at 900 HV at 50 A/dm² (an 80% rise from 500 HV at 40 A/dm²). However, excessive stress at 60 A/dm² leads to microcracking and hardness plateauing (~650–700 HV). Higher crack density improves wettability (contact angle ~17°), enhancing lubricant …

Upcycled Waste-Derived Triboelectric Nanogenerator For Sustainable Energy Harvesting, Archana Panda, Basanta Kumar Panigrahi, Subhendu Pati, Sunit Gourav Mohanty, Kushal Ruthvik Kaja

Journal of Metals, Materials and Minerals

The proliferation of disposable paper-based materials in laboratories has raised significant environmental concerns due to their rapid discard and accumulation. This study explores the upcycling of commonly discarded laboratory waste, specifically butter paper and polyurethane (PU) foam, into a single-electrode triboelectric nanogenerator (TENG) for mechanical energy harvesting. The fabricated device employs butter paper as the positive triboelectric layer and PU foam as the negative layer, with an aluminium tape electrode. Electrical tests reveal a peak voltage of 21 V and current of 47 nA, reaching a maximum power of 438 nW at 500 MΩ load. The TENG demonstrates stable performance …

The Effects Of Starting Microstructure On The Results Of Double Intercritical Annealing Process Of 0.107%C-2.39%Mn-0.453%Si Dual Phase Steel, Wichayut Chumoung, Nithi Saenarjhan

Journal of Metals, Materials and Minerals

This study investigates and compares the effects of the starting microstructure on the double intercritical annealing (DIA) process on the microstructure and mechanical properties of 0.11%C-2.39%Mn-0.45%Si dual phase steel. The specimens were austenitized, followed by water quenching (WQ) or air cooling (AC), then DIA at 730°C. For the WQ method, high cooling rate results in the formation of a high strength martensitic structure. Conversely, AC method yields a moderate cooling rate, forming a bainitic structure. After single intercritical annealing (SIA), the microstructure transformed into ferrite and martensite. WQ method specimens contain high stress concentration, leading to earlier recrystallization compared to …

Effects Of Thickness On The Performance Of Sno2 Gas Sensors Using Low-Temperature Co-Fired Ceramic, Montri Aiempanakit, Kittiyaporn Singsumphan, Chutima Nakmuk, Cheewita Suwanchawalit, Manatsawee Srirak, Kata Jaruwongrungsee, Anurat Wisitsoraat, Monrudee Liangruksa, Chawarat Siriwong

Journal of Metals, Materials and Minerals

This study develops SnO2-based gas sensors integrated with a low-temperature co-fired ceramic (LTCC) micro hotplate for ethanol detection. SnO2 nanoparticles were synthesized using a simple precipitation method, and sensing layers with varying thicknesses around 0.24 µm, 0.71 µm, and 1.20 µm were applied to evaluate their influence on performance. The results show that the optimal configuration is a 0.71 µm layer, offering high sensitivity, fast response, and efficient recovery. Operating at a low voltage of 3.2 V, the sensors exhibit low power consumption, suitable for portable and battery-operated applications. The gas-sensing mechanism relies on changes in resistance due to interactions …

Atmospheric Corrosion Of Hot Dip Galvanized Structural Steel Exposed To The Tropical Climate Of Thailand, Adithep Bunphot, Pakawat Sancharoen, Somnuk Tangtermsirikul, Taweep Chaisomphob

Journal of Metals, Materials and Minerals

Hot dip galvanized steels were tested in the atmospheric tropical climate environments of Thailand for 12 month from March 2021 to March 2022. Three locations were studied, i.e. a rural area at Saraburi in the central part, an industrial area at Chonburi in the eastern part, and a coastal/urban area at Songkhla in the southern part of Thailand. The thickness loss of the galvanized steel samples was measured by the weight loss method. Types of corrosion products observed on the samples were zincite, wulfingite, hydrozincite, and simonkolleite. All of them were found on the sample at Songkhla. Three of them, …