Engineering Commons^™

A Precipitation-Hardened High-Entropy Alloy With Excellent Mechanical Properties Additively Manufactured By In-Situ Alloying, Matthew Luebbe, Shahryar Mooraj, Jonathan Poplawsky, Hans Pommerenke, Wen Chen, Haiming Wen

Materials Science and Engineering Faculty Research & Creative Works

Studies on precipitation-hardened high-entropy alloys (PHEAs) have demonstrated high strength, good ductility, and thermal stability, making them excellent candidates for high-temperature structural applications such as nuclear reactors. However, many complex parts for those applications would need to be produced via additive manufacturing (AM), whose rapid cooling rates and multiple heating cycles could change the microstructure of the chosen alloys and accordingly their mechanical properties. A PHEA, (Fe0.3Ni0.3Mn0.3Cr0.1)88Ti4Al8, which was developed and produced via conventional manufacturing in our previous work with high strength but low ductility, was chosen to test the effects of AM on the microstructure and mechanical properties. Scanning …

Experimental Determination Of Tnt Equivalence Values For Binary Energetic Materials, Gracie May M. James, Rachel L. Bauer, Emily M. Johnson, Catherine E. Johnson

Mining Engineering Faculty Research & Creative Works

TNT equivalency quantifies the impact of energetic materials relative to TNT, aiding in safety guidelines and performance evaluations. Despite widespread use in industry, military, and research, many binary energetics lack published TNT equivalence values. This study experimentally determines TNT equivalency values for Helix, Texpak, Rimfire, Tannerite, and Kinepak using three tests: (1) plate dent, (2) reaction velocity and (3) air blast. Each test evaluates distinct aspects of energetic performance, addressing both close-in destructive power and downstream effects. Helix produced TNT equivalence values from 0.64 to 1.10, comparable to TNT, while Kinepak had lower values (0.18 to 0.58) indicating limited brisance, …

Assessing Technology Adoption In The Construction Industry, Lucas D. Gibbons

Construction Management

The construction industry is steadily integrating new technologies, yet adoption varies widely depending on company size, market sector, and internal readiness. This study examines how common technologies such as drones (UAVs), Building Information Modeling (BIM), robotics and automated equipment, laser scanning/LiDAR, AI-driven scheduling or analytics tools, and augmented or virtual reality (AR/VR) are being applied in practice, and what benefits they are delivering to construction organizations. To better understand the factors shaping adoption, a survey was administered to members of the CMAC (Construction Management Advisory Council) board representing a range of contractors and industry stakeholders. The survey assessed current technology …

Design And Assessment Of A Single-Blade Rotary Wing For Use In Vertical Takeoff And Landing (Vtol) Aircraft, William C. Mcmasters

Mechanical & Aerospace Engineering Theses & Dissertations

A single-bladed propeller was designed to determine its efficacy in increasing efficiency of quadplane aircraft in the cruise configuration while still providing sufficient vertical lift for the vertical takeoff portion of flight. Aerodynamic theory predicts higher efficiency for single-blade propellers, resulting in a lower power requirement. A counter-weighted single-blade was modeled after a 10x5 model aircraft propeller used in small unmanned vehicles with a steel counterweight to balance centrifugal forces. The propeller was tested in the ODU wind tunnel to determine performance at various Advance Ratios (J). The research suggests that single-blade propellers show comparable performance compared to two-bladed propellers …

Separating The Control Of Moving And Holding In Human Post-Stroke Arm Paresis, Alkis M. Hadjiosif, Kahori Kita, Scott T. Albert, Robert A. Scheidt, Reza Shadmehr, John W. Krakauer

Biomedical Engineering Faculty Research and Publications

Moving and holding-still (holding) have been posited to be separately controlled. The paretic arm after stroke exhibits different abnormalities during rest vs. movement, providing an opportunity to ask whether control of these behaviors is independently affected in stroke. We quantified resting postural abnormalities in human stroke patients by measuring their biases in force production as they held their hand still in various locations in a planar workspace and then assessed whether these resting force biases influenced reaching in the same workspace. Patients displayed marked resting force biases at each location, even when the arm was supported. However, these …

Data Driven Design Of Ultra High Performance Concrete Prospects And Application, Bryan K. Aylas-Paredes, Taihao Han, Advaith Neithalath, Jie Huang, Ashutosh Goel, Aditya Kumar, Narayanan Neithalath

Electrical and Computer Engineering Faculty Research & Creative Works

Ultra-high-performance concrete (UHPC) is a specialized class of cementitious composites that is increasingly used in various applications, including bridge decks, connections between precast components, piers, columns, overlays, and the repair and strengthening of bridge elements. The mechanical and durability properties of UHPC are significantly influenced by factors such as low water-to-binder ratios, the inclusion of supplementary cementitious materials (SCMs), and fiber reinforcement. Machine learning (ML) has been employed to predict the performance of UHPC and optimize its mixture designs by using various raw materials. This study first provides a comprehensive review of ML applications in UHPC, focusing on predicting workability, …

Design And Testing Of A Vr Escape Room Game For Philippine Martial Law History, Eric Cesar Vidal, Jr., Johanna Marion R. Torres, Jesus Alvaro Pato, Kenneth King L. Ko

Department of Information Systems & Computer Science Faculty Publications

This paper presents a Virtual Reality Educational Escape Room game where players learn about the highly divisive Martial Law period in Philippine history. We describe the game’s general design and the results of a user test to evaluate the game in terms of VR presence, immersion, and overall usability.

User Evaluation Of A Virtual Patient For Philippine Medical Education, Ma. Mercedes T. Rodrigo, Samantha Castaneda, James Alvir Maclin V. Alaan, Paolo Santino P. Caoile

Department of Information Systems & Computer Science Faculty Publications

Caladrius is a virtual patient system designed for use in Philippine medical schools. It responds to the need for medical interview training, for greater variety in teaching-learning strategies, and for culturally appropriate technologies. It has two versions: a text-only version whose interface is similar to a chat interface, and an audio version that accepts speech input and responds with speech output. In a prior test of Caladrius, users requested improved audio response time and the inclusion of different patient personalities. A subsequent version of Caladrius was created to comply with these requests. As much of the lag was attributable to …

Investigating The Performance Of Fibre Reinforced Plastic Repairs To Timber Marine Civil Structures At His Majesty’S Naval Base Devonport, Anna G. Walther

The Plymouth Student Scientist

This paper explores Fibre Reinforced Plastics (FRPs) as a composite repair method to restore and enhance mechanical properties of timber marine civil structures within the context of His Majesty’s Naval Base (HMNB) Devonport. To support this, timber composite specimens were manufactured and subjected to flexural and compressive strength tests. Comparisons are made to literature sources for initial predictions, in addition to hand calculations and Finite Element Analysis (FEA) models on SolidWorks. Data demonstrates that FRPs can be used as a cost-effective and beneficial method of repairing timber marine structures. Experimental data demonstrates an ability to restore compressive strength parallel to …

Mechanical Properties Of Sintered Lunar Regolith Simulant Lhs-1 When Moulded Under Different Temperatures And Time At Constant Pressure, Jasper Stevens

The Plymouth Student Scientist

Humans are returning to the Moon for the first time since 1972. And when they arrive, In-Situ resource Utilisation (ISRU), the philosophy of using local materials and resources will be required to help maintain a more permanent presence on the Moon. Lunar regolith is the homogenous layer of inorganic ‘soil’ that covers nearly the entire Lunar surface, making it the most readily available material for ISRU. This report investigates the effect of changing time and temperature applied to samples of lunar regolith simulant LHS-1 formed as freestanding samples under constant pressure, before sintering into a consolidated sample. Compressive testing on …

Application And Suitability Of Using Paraffin Wax In A Thermal Store For Residential Buildings In The Uk, Cameron Edwards

The Plymouth Student Scientist

Heating costs and pressure to reduce carbon emissions are rapidly increasing. A possible solution is the implementation of efficient energy storage systems for UK residential buildings. Paraffin wax-based thermal energy storage offers a promising solution due to its low-cost, high-energy density, and long-term stability. However, its low thermal conductivity significantly reduces its practicality. Multiple upgrades, such as implementing highly conductive particles and nanotubes, have been previously studied but lack the inclusion of cost-effectiveness and real-world feasibility. This paper reviews current research and develops a numerical model using the Enthalpy method and a 2D finite difference approach, utilised in Python. It …

Vacuum-Assisted Resin Transfer Moulding (Vartm): Can Ultrasonic Vibration Decrease Fill Time, Increase Composite Properties, And Reduce Void Formation, Iulia D. Precup

The Plymouth Student Scientist

This study investigated the potential of ultrasonic vibration (28 kHz) to optimize the Vacuum-Assisted Resin Transfer Moulding (VARTM) process. The aim was to assess whether introducing ultrasonic vibration during the resin infusion phase could reduce fill time, improve mechanical properties, and minimize void formation in glass fibre-reinforced polyester composites. Two flexible tooling systems were compared: a reusable silicone membrane and a traditional vacuum bag. Composite plates were manufactured with and without ultrasonic vibration for both systems. Fill time was observed, and post-cured samples were subjected to mechanical testing for flexural modulus, flexural strength, and interlaminar shear strength (ILSS). Void content …

Scaling Wind Farm Layout Optimisation To Meet Uk Energy Demands, Grace Richardson

The Plymouth Student Scientist

This research aims to explore the Wind Farm Layout Optimisation Problem (WFLOP) through both single- and multi-objective optimisation, to show that it can be used to create farm layouts that provide enough power for all homes in the UK. We highlight the intricacies of the problem, including the application of different algorithms and models, and the challenges of scaling the models to achieve optimal results. We employ both a Hill Climbing Algorithm (HCA) and an evolutionary algorithm (NSGA-II) to obtain wind farm layouts, and compare these to the well-known results proposed by Mosetti et al. Moreover, we present a novel …

Design And Validation Of An Industrial Out-Of-Plane Permeability Test Rig Of Fibre Preforms For The Development Of Next Generation Aircraft Structures, Callum Park

The Plymouth Student Scientist

Despite composites comprising 50% of modern aircraft structures, the absence of a standardised method for measuring out-of-plane permeability frequently results in manufacturing defects in early-development aerospace components, directly impacting safety, manufacturing efficiency and costs. This study aimed to address this gap, by designing and commissioning a compact, vacuum-assisted, mass flow test rig, capable of evaluating the saturated out-of-plane permeability of a variety of materials. This design incorporated learnings from theory, previous studies and discussions with industry experts. E-glass, a Metyx unidirectional carbon and the Teijin ITS55 carbon were investigated, where E-glass exhibited the highest permeability of 1.88E-12m², while …

Ai-Driven Electromagnetic Design And Performance Prediction Of Microstrip Antennas, Eduardo Javier Vazquez

Theses and Dissertations

This thesis investigates the application of Deep Learning to automate and accelerate microstrip antenna inverse design. The initial investigation was to predict microstrip antenna performance from its geometry parametric input, and found out that forward prediction with adopted geometric representation results in ill-posed scenario, high ambiguity and unstable mapping. The study later mostly focuses on the inverse prediction by machine learning from S11 parameter input to predict antenna patch geometry parameters instead.

A dataset of 5,000 ANSYS HFSS simulated antennas (later filtered to 4,136 valid samples) was generated using cubic spine -described geometry profiles. Multiple neural architectures were adopted for …

Boundary-Layer Mechanisms In Flow Over Triangular Porous-Textured Flat Plates: A Computational Fluid Dynamics Study, Luis Angel Alvarez

Theses and Dissertations

Growing demand for energy-efficient vehicles drives research into flow control strategies that mitigate aerodynamic drag. Active devices such as morphing flaps or plasma actuators offer real-time authority but require external power. Passive concepts, including riblets, tubercles, porous coatings, and miniature vortex generators, reshape the boundary layer without additional energy input. We propose an integrated passive solution called Triangular Porous Texturing (TPT). TPT combines the two mechanisms: a periodic array of triangular prisms that generate controlled streamwise vortices, and an embedded porous matrix that locally adjusts pressure gradients near the wall. Acting synergistically, these features attenuate near-wall turbulence, redistribute momentum, and …

Development And Testing Of A Prototype Erbium-Doped Lithium Tantalate Based Sensor For Infrastructure Crack Detection And Measurement, Alejandro Barrera

Theses and Dissertations

Ensuring the safety and longevity of infrastructure is crucial to safeguarding communities and preserving economic stability. In this study, the development of a novel sensor for detecting and characterizing cracks in infrastructure, particularly suited for deployment on Unmanned Aerial Vehicles (UAVs), is presented. The device utilizes a laser (operating at 980 nm) for excitation of erbium-doped lithium tantalate nanoparticles that emit 1550 nm wavelength, which stimulates a photodiode for data collection. The data was utilized to collect, process, and reconstruct topological information. The synthesized lithium tantalate nanoparticle samples vary in erbium doping percentages of 0.5%, 3%, and 10%. Experimental evaluation …

Feature Extraction From Railroad Bearing Onboard Vibration Sensors Using Machine Learning Models, Diego Cantu

Theses and Dissertations

The University Transportation Center for Railway Safety (UTCRS) has developed an algorithm capable of identifying defective railroad bearings, determining damaged component(s) within, and quantifying severity of the defects. The defect-detection algorithm requires the operating speed as an input, which is not readily available in field operation of onboard sensors. Therefore, onboard sensors deployed in rail revenue service must rely on Global Positioning Systems (GPS) to obtain speed, which can be power-intensive and susceptible to signal interference. This study covers the development of a vibration-based model that extracts operating speed from wireless sensor data to enable fully autonomous onboard diagnostics. Signal …

Building Services Engineering November/December 2025

Building Services Engineering

No abstract provided.

Volume Status Detection With Integral Pulse Frequency Modulation Model Of Peripheral Venous Pressure, Jeremiah Rhys Wimer

Graduate Theses and Dissertations

This thesis studies the effectiveness of utilizing a modified integral pulse frequency modulation (IPFM) algorithm to synthesize peripheral venous pressure (PVP) waveforms for the detection of several physiological conditions using logistic regression. PVP waveforms are collected from 18 human patients and 4 porcine subjects. Human data are used to train models for determining the hypovolemic status of the patient, while the porcine data are used to train models for determining level of anesthesia and detecting internal hemorrhaging. In the human dataset, the waveforms collected from the 18 patients are classified into two groups according to serum chloride levels: resuscitated (≥100 …

Extreme Bandgap Recessed-Gate Metal Oxide Semiconductor Heterostructure Field Effect Transistors With Drain Current 0.28 A Mm−1 And Threshold Voltage −1.5 V, Abdullah Al Mamun Mazumder, Abdullah Mamun, Kenneth Stephenson, Kamal Hussain, Tariq Jamil, Grigory Simin, Asif Khan

Faculty Publications

Herein, the first demonstration of hybrid high-k oxide (ZrO2-Al2O3) incorporation into extreme bandgap (EBG) Al_0.87Ga_0.13N/Al_0.64Ga_0.36N metal-oxide-semiconductor heterostructure field-effect transistors (MOSHFETs) is presented, with both planar and recessed-gate designs on the same AlN/sapphire template with a state-of-the-art low contact resistance of 1.4 Ω mm (contact resistivity, ρc ≈ 5.7 × 10−6 Ω cm2). The recessed-gate MOSHFETs achieve a threshold voltage shift of ΔVTH = 5.8 V, highlighting improved channel control. Static output measurements reveal a peak drain current (IDS) of 340 mA mm⁻¹ for the planar …

An Audio Data-Driven Roadway Digital Twin And Its Underlying Framework For A Digitized Transportation Construction Environment, Anisha Deria, Pedro J. Chacon Dominguez, Yong-Cheol Lee, Jin W. Choi

Michigan Tech Publications

The increasing need to build and maintain transportation systems has led project managers to manage multiple projects simultaneously. Roadway projects often entail several miles of job site, making it difficult to keep track of progress and maintenance activities. To improve the situation, this study proposes an audio data-driven roadway digital twin framework for real-time and remote monitoring of construction projects. The latent characteristics of a digital twin required for establishing a digitized work environment were investigated. As a primary method of seamlessly linking virtual and physical environments, audio data classified and analyzed by deep neural network (DNN) has been employed …

Property Management System, Abbas Kurnool

Electronic Theses, Projects, and Dissertations

The real estate industry generates and manages large amounts of data, including tenant information, lease agreements, property maintenance schedules, and financial transactions. Reliance on traditional manual methods often results in inefficiencies, fragmented data, and delays in decision-making. To overcome these challenges, this project presents the design and implementation of a Real Estate Property Management System (REMS) for Future Properties, a company aiming to optimize its operations through digital transformation.

The proposed system is developed on Microsoft Dynamics 365 as the core platform, integrated with the Microsoft Power Platform tools (Power Apps, Power Automate, and Power Pages). This integrated framework provides …

Complementary Color Laser Illumination For Perceptual Contrast Enhancement In Structurally Colored Samples, Tomoshree Dash

All Theses

Structural color, a phenomenon arising from nanoscale interaction between light and materials, has the potential to unveil biological, chemical, physical, and mechanical characteristics of the sample. It enables direct visualization of the sample by human users with high spatiotemporal resolution. However, its impact is often constrained by challenges in the perceptual differentiation of subtle color variations. This thesis introduces complementary color laser illumination (C²LI) as an imaging technique that enhances color perception of the Human Visual System (HVS) by accessing the psychophysical non-linearities in chromatic color perception. C²LI offers a platform optimized for the HVS by …

Diabetes-Induced Mitral Valve Degeneration: Tissue-Engineered Solutions And Antioxidant Therapy, Samantha Hahn

All Theses

Mitral valve (MV) fibrosis is a progressive pathological condition characterized by leaflet thickening and stiffening, ultimately compromising valve function. This process is accelerated in diabetes, where chronic hyperglycemia elevates reactive oxygen species (ROS) and alters the mechanics of the extracellular matrix (ECM), collectively promoting the activation of valvular interstitial cells (VICs). Under healthy conditions, VICs maintain a quiescent, fibroblast-like phenotype responsible for sustaining ECM homeostasis. However, pathological biochemical cues or mechanical stress drive VICs toward a myofibroblast phenotype. While this transformation is essential for short-term repair, its persistence contributes to maladaptive MV remodeling and fibrosis. Diabetic stressors may be mitigated …

Mitral Annular Calcification In Diabetes: Valvular Interstitial Cells, Antioxidant Therapy, And Tissue Engineering Approaches, Raleigh J. Keenan

All Theses

Mitral annular calcification (MAC) is a chronic, progressive, and degenerative condition that impairs mitral valve function and increases the risk of cardiovascular disease. The mitral annulus is a saddle-shaped, fibrous structure that is primarily composed of collagen and elastin. The annulus also contains interspersed lipids that are involved in cellular metabolism, as well as inflammatory and osteogenic signaling. These lipids increase the annulus’ susceptibility to calcification, under conditions that increase mechanical stress (hypertension) and promote atherosclerosis (diabetes mellitus). These conditions intensify calcification by promoting the activation of valvular interstitial cells (VICs), increasing fibrosis, and inducing osteogenic differentiation. Although it is …

The Iron Pyramid: Expanding The Iron Triangle To Integrate Safety As A Fundamental Dimension Of Construction Success, Laura Cooley

All Theses

For more than fifty years, construction project success has been judged by staying on schedule, remaining within budget, and completing the planned scope of work—an approach commonly known as the “Iron Triangle” (Barnes, Ph.D., 2006). While these measures are important, they do not capture the full range of factors that determine whether a project truly succeeds.

This study introduces the “Iron Pyramid” (Cooley, 2025), a model that expands the traditional framework by adding a fourth dimension: safety. Safety is understood not simply as regulatory compliance or the absence of injuries, but as a holistic construct encompassing project culture, leadership practices, …

Experimental And Numerical Study On The Influence Of Carbon Fiber Reinforcement On The In-Plane Compressive Properties Of 3d Printed Hexagonal Honeycomb Core Structures, Deon Wallace

All Theses

There is difficulty with numerically replicating the behavior of composite honeycomb core structures numerically due to the trouble of gathering material properties from a hollow structure. Also, complex part geometries and carbon fiber reinforcement strategies can lead to unwanted structural weaknesses and variance in material properties that may not be reflected in numerical analysis when the part is additively manufactured. In this study, edgewise compressive testing is used to characterize the mechanical behavior and performance characteristics of these structures. The experimental results indicate an increase in the Young’s moduli of the honeycomb core structures as carbon fiber concentration increases. However, …

Tradespace Exploration For Multiple Collaborative Vehicles, Mrunal Deshmukh

All Theses

Modern military operations demand systems that adapt to uncertain, rapidly changing missions across diverse terrains. Traditional single-platform vehicle design is insufficient for such complexity. This research introduces a hierarchical tradespace exploration framework for designing and evaluating families of heterogeneous ground vehicles under a System-of-Systems (SoS) architecture. The framework treats vehicle design as a co-optimization problem, where a “parent” vehicle (e.g., a Squad Multipurpose Equipment Transport) coordinates specialized “child” vehicles for reconnaissance, amphibious tasks, terrain traversal, and stealth missions. Unlike conventional approaches that optimize vehicles individually, this study emphasizes collaborative performance, resource sharing, and adaptability at the family level. Central to …

Experimental Determination Of Modulus Of Rupture For Concrete Masonry Beams And Implications For The Tms 402/602 Code, Shreedhar K C

All Theses

Currently, the experimental database for Modulus of Rupture (MOR) of masonry beams is limited, and current provisions in TMS 402/602-22 use the MOR values from wallette tests. The primary goal of this research is to experimentally determine the parameters that influence MOR. The secondary goal of this work is to compare the MOR values from beam and bond wrench tests obtained in this study with each other as well as with values published in the literature. The standard ASTM E518 test was used for determining MOR values for beams, and a modified approach to ASTM C1072 that nullifies the eccentricity …