Engineering Commons^™

Radiation Assessment And Distribution In Changing Atmospheric Structures And Turbulence (Radcast), Steven B. Hernandez

Theses and Dissertations

The accessibility of materials and online information has made radiological dispersal devices (RDDs) a more probable threat than conventional nuclear weapons. This study analyzed five datasets from three test periods, using a correlation analysis between optical turbulence, aerosol concentration, and environmental parameters, and geometric mean diameter (GMD) calculations. The correlation analysis failed to yield meaningful insights, prompted a transition to the GMD analysis, which produced clearer results. Findings show GMD ranged from 38–41 nm, increasing at night and during neutral events as reduced vertical motion and boundary layer contraction correlated with optical turbulence. An alternative GMD dataset, calculated by the …

Numerical Studies Of Semiclassical Light Storage Using The Coherent Atomic Transfer Function, Zachary T. Johnson

Theses and Dissertations

Quantum communication through photons relies on photonic storage to preserve quantum states. However, when photons interact with matter, quantum information becomes distorted. A recently developed semi-classical analytical model predicts output light pulses from an electromagnetically induced transparency (EIT) system. Using the predictions, the model known as the Coherent Atomic Transfer (CAT) Function, is capable of predicting the stored pulse or reconstructing the original pulse. Using numerical convolution and deconvolution with the CAT function as an analog of the point spread function of Fourier optics can provide insights on the effects of EIT storage on the retrieved pulse. Blind deconvolution is …

Transfer Efficiencies Of Surface-To-Surface Transport Of Micron-Sized Actinide Surrogate Particles, Austin R. Powell

Theses and Dissertations

Particle effluent of varying sizes is released during routine activities within laboratory environments and these particles can come in contact with a wide range of surfaces. Particles of micron size or smaller can be especially pervasive and can transfer between multiple subsequent surfaces, leading to the progressive contamination of a laboratory. Understanding the transport dynamics of micron sized particles will help inform facility personnel of the possibility of contamination by these potentially hazardous materials of interest. In this research, the transfer efficiency of micron sized surrogate actinide particles (Europium-doped Gadolinium Oxysulfide (EGOS)) is measured for multiple materials, between two particle …

Characterization Of The Neutron Spectrum Produced By A Pulsed Power Generator, Daniel S. Godlasky

Theses and Dissertations

Neutron time-of-flight, activation foils, and spectral unfolding software were used to characterize the energy and fluence of the neutron spectrum created by the Gamble II pulsed power generator. Gamble II is a pulsed power generator that delivers a 1 MV to 2.2 MV and 800 kA electrical pulse peaking at 50 ns. This electrical release creates deuterium ions in the diode that are accelerated to a neutron converter covered with a novel lithium fluoride or deuterated polyethylene to create primarily ⁷Li(d,n) or D(d,n) and ¹²C(d,n) nuclear reactions. In October 2024, two D(d,n) shots occurred, and in November 2024, …

Measurements Of The Radioisotope Production Cross Section Of 193Ir(N,N')193mIr Between 0.5–9 Mev, Ronnie P. Rera

Theses and Dissertations

This thesis covers a measurements of the radioisotope production cross section of ¹⁹³Ir(n,n′) ^193mIr between 0.5–9 MeV is discussed. The experiment was performed at the University of Notre Dame St.ANA 5U accelerator laboratory. Experimental planning, data collection, analysis, results, and impacts are discussed.

Universal Model Based Systems Engineering Rendezvous And Proximity Operations Mission Planner, Thomas J. Kelly

Theses and Dissertations

This thesis addresses the fragmentation and inefficiencies in current Rendezvous and Proximity Operations (RPO) mission planning by developing an integrated Model-Based Systems Engineering (MBSE) framework. The research explores the design and implementation of RPO missions using System Modeling Language (SysML) and Matlab-based physics simulation to improve mission planning processes. Key objectives include the standardization of mission requirement characterization, the development of evaluation criteria for mission plans, and the implementation of iterative design methods to refine RPO strategies. The study leverages the Hill-Clohessy-Wiltshire (HCW) equations for initial mission planning, incorporating rigid-body attitude control with properties generated from the physical description, and …

Fatigue Behavior Of Two Advanced C/Sic Composites At 1200°C In Air, Conner A. Adams

Theses and Dissertations

High-temperature tension-tension fatigue behavior of two advanced carbon/silicon carbide (C/SiC) ceramic matrix composites (CMCs) was investigated. Both composites were reinforced with T300 carbon fibers. Laminated carbon fiber preforms consisted of 24 plies of plain weave fabric in a 0/90 layup. The first composite, C/CVI-SiC, was processed by chemical vapor infiltration (CVI) of SiC into the fiber preform. Prior to the CVI process, the fiber preforms were coated with a duplex pyrolytic carbon and boron carbide fiber coating to create a weak fiber- matrix interphase. The second composite, C/HYPR-SiC, was also processed via CVI, but had an oxidation inhibited matrix comprising …

Adiabatic And Overall Effectiveness Superposition Theory For Upstream Phantom Cooling On A Film Cooled Leading Edge, Nathaniel J. Stout

Theses and Dissertations

Film cooling experimentation aims to improve the cooling performance while minimizing the amount of coolant flow redirected from the compressor. The coolant flow that is used for film cooling reduces the maximum thrust any gas turbine engine can produce. Finding creative ways to improve cooling performance without increasing the amount of coolant used, like phantom cooling, is essential for the gas turbine industry to improve engine performance while increasing turbine components’ lifespan. Phantom cooling refers to any secondary cooling effect that propagates downstream from its original cooling application to cool subsequent turbine components. Phantom cooling is actively gaining more attention …

Heterogeneous Boid Swarm Performance Under Environmental And Neighbor Communication Link Variability, Jonathan C. Oxborrow

Theses and Dissertations

Artificial swarms are of growing interest in numerous fields and use cases. As their utilization increases drones and robots with different capabilities will be required to coordinate for task completion thus creating heterogeneous swarms. Swarm individuals generally communicate with all neighbors inside their sensor range generating a significant amount of message traffic. Previous research of a heterogeneous group in a non-physical environment has shown that restricting communication to only one neighbor of each different capability maintained performance. This work applies that finding to a heterogeneous boid swarm with the addition of varied environmental conditions. The swarm is comprised of three …

Fatigue Behavior Of An Advanced Sic/Sic Composite With An Array Of Small Cooling Holes At 1200°C, Tess K. Panchyshyn

Theses and Dissertations

Tension-tension fatigue behavior of an advanced melt-infiltrated (MI) silicon carbide/silicon carbide (SiC/SiC) composite was evaluated, and basic tensile properties measured, at 1200°C in laboratory air.  The composite consists of a melt-infiltrated SiC matrix reinforced with laminated Hi-Nicalon Type-S fibers woven in a 5-harness satin weave. The Hi-Nicalon-S fiber preforms were coated with a boron nitride (BN) fiber coating by chemical vapor infiltration (CVI). The melt-infiltrated matrix was consolidated by combining CVI-SiC with SiC particulate slurry and molten silicon infiltration. The finished ceramic matrix composite (CMC) had a fiber volume fraction of 33%. Additionally, the effect of multiple small holes on …

Saudi Arabian Universities' Need For A Nuclear Security Educational Textbook: A Systematic Review, Faisal Bin Nasser Sarbaland, Takaaki Sakai

International Journal of Nuclear Security

Nuclear security education is a critical element in ensuring the safe and responsible use of nuclear energy, particularly in countries like Saudi Arabia, where the demand for energy is increasing. This systematic review explores the current needs for nuclear security educational materials in Saudi Arabian universities, focusing on the development of a specialized textbook for this purpose. The review addresses the increasing global demand for nuclear security professionals and highlights the gaps in educational resources available in the Middle East, particularly in Saudi Arabia. Using a thematic analysis of existing educational programs and curricula from various international institutions, the paper …

Analysis Of Nuclear Security And Safety Integration Using Survey Responses And Pairwise Comparison Methods, Sheila V. Gbormittah, Theodore A. Thomas, Jason Timothy Harris

International Journal of Nuclear Security

Integrating nuclear security and safety is important for implementing and sustaining nuclear technology because it promises improved and effective management. This integration is an ongoing effort to ensure that both work together with minimal conflicts. This research aimed to determine the preferred level at which nuclear security and nuclear safety integrate by using the pairwise comparison methods of decision-making. This methodology used survey responses from women nuclear professionals to identify the most-desired criteria at three levels: strategic, operational, and cultural. The strategic level includes actions that government officials and regulators can take. The operational level encompasses actions that deliver the …

Wright State University's Celebration Of Student Research, Scholarship & Creative Activities From Thursday, March 13, 2025, Wright State University

Celebration of Undergraduate & Graduate Research, Scholarship, and Creative Activities Abstract Books

The student abstract booklet is a compilation of abstracts from students' oral and poster presentations at Wright State University's Celebration of Student Research, Scholarship & Creative Activities on March 13, 2025.

Workforce Forecasting For State Transportation Agencies: A Machine Learning Approach, Adedolapo Ogungbire, Suman Kumar Mitra

Civil Engineering Faculty Publications and Presentations

A decline in the number of construction engineers and inspectors at state transportation agencies (STAs) to manage the ever-increasing lane miles has emphasized the importance of workforce planning in these agencies. Forecasting workforce requirements is crucial for effective planning in any industry or agency. This study developed machine learning (ML) models to estimate the person-hour requirements of STAs at the project level. The Arkansas Department of Transportation (ARDOT) was used as a case study, using its employee and project details data between 2012 and 2021. ML regression models ranging from linear, tree ensembles, kernel-based, and neural network-based models were …

Ultrasonic Cavitation Erosion Behaviour Of Plastically Deformed Textured Stainless-Steel Surface, Amit Raturi, Mayank Garg, Harpreet S. Grewall, Harpreet S. Arora

Mechanical Engineering Faculty Publications

In this study, we utilized an innovative pathway to obtain exceptional resistance to the cavitation erosion-corrosion behavior by combining surface texturing with severe surface deformation. Severe surface deformation was carried out using stationary friction process (SFP) followed by micro-texturing through a micro-imprinting approach. The textured sample after processing (SFP+T) had erosion resistance that was 6-7 times greater than that of the as-cast sample under ultrasonic cavitation conditions. In addition, the SFP+T sample was able to sustain a similar trend in the erosion-corrosion medium as well. Furthermore, the flow field characteristics of textured and nontextured samples were investigated using numerical calculations …

Understanding The Underlying Trends In Us Construction Labor Wages: A Data-Driven Mixed-Method Computational Approach, Bahaa Chammout, Islam H. El-Adaway

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Precisely forecasting construction costs is crucial for maintaining financial stability for contractors and the broader construction sector. Nonetheless, this task has long been acknowledged as challenging. Recent global events and inflationary pressures have notably driven up construction labor expenses. While existing research examined labor shortages, there remains a gap in understanding the diverse labor wage trends. This paper addresses this research gap following a multistep methodology, which included: (1) gathering construction labor data from 1999 to 2023; (2) conducting trend and statistical analyses to discern the underlying patterns in labor trends; (3) employing clustering analysis to categorize construction occupations based …

Realistic Bionic Arm Development For Transradial Amputation, Bailey A. Wall, Lilly Noel Curdy, Ruthie Mccall, Courtney Mahoney, Andres Trejo

Biomedical Engineering

The VeraLimb realistic bionic arm is intended for use by individuals with a trans-radial amputation or congenital limb deficiency below the elbow to provide functional hand and arm movements. This advanced prosthetic device is designed to mimic a biological hand's natural motion, dexterity, control, and aesthetic, giving the user a higher sense of restored limb functionality. It offers an experience that closely restores motor function in a way that resembles having a natural hand rather than interacting with a mechanical device. The VeraLimb is suitable for daily activities, allowing users to grasp, manipulate, and interact with objects. It is designed …

Design Of An Electro-Hydraulic Laboratory Test System For Adjusting The Inclination Angle Of Sowing Machines, Aytac Moralar, Figan Dalmis, Bahattin Akdemir

The Philippine Agricultural Scientist

Field testing of grain sowing machinery requires favorable field conditions and sufficient time periods, making laboratory tests a preferred alternative for determining performance under controlled conditions. However, a standardized testing system for evaluating sowing machinery has not yet been established. In this study, a test system was designed for laboratory testing of universal grain sowing machines. A movable platform was built on a chassis made using sheet metal with different dimensions and profiles. It operates through a hydraulic system via a programmable logic controller-based control system. The sowing machine placed on this platform allows for inclination adjustments (front, back, right, …

Forecasting And Assessment Of Air Quality Dynamics In Northeast India Using Machine Learning Models, Kumar Shubham, Gopikrishnan T, Anshuman Singh

The Philippine Agricultural Scientist

This study investigated air quality dynamics in Northeast India, a region with unique terrestrial features, including the Eastern Himalayas. While air quality varies across districts, pollution impacts the entire area. Northeast India’s rich ecology is crucial for Himalayan climate regulation. Robust air quality monitoring and pollution control are essential to preserve environmental balance. This work focused on forecasting emissions of aerosols, SO₂, NO₂, CO, HCHO, O₃, and CH₄ primarily associated with human activities. Utilizing data from the Tropospheric Monitoring Instrument (TROPOMI) satellite instrument from 2019 to 2023, a 9-mo forecast was conducted using …

Feasibility Of Hyperspectral Sensing For Detection Of Early Stages Of Corrosion In Structural Steel, Amrita Das, Sattar Dorafshan

Civil Engineering Faculty Publications

The estimated global cost of steel atmospheric corrosion is 3-4% of the Gross Domestic Product, despite decades of corrosion mitigation practice. Steel, widely used for infrastructure construction, is composed primarily of iron and therefore is extremely vulnerable to atmospheric corrosion. The free iron atoms are highly reactive with water and oxygen molecules abundantly found in the atmosphere. Common non-contact in-field corrosion detection methods such as visual imaging and passive infrared thermography (IRT) use characteristics of visible corrosion compounds as the main features for corrosion detection. In this study, diffuse spectroscopy is investigated for the feasibility of corrosion detection before visual …

Refining Chlorosulfonation Methods For The Synthesis Of A Perfluoroalkyl Arylsulfonimide (Pfsi) Monomer, Ainsley P. Foster, Ben Varney, Hua Mei

SPARK Symposium Presentations

Proton-exchange membrane (PEM) fuel cells are sources of energy that are clean, quiet, and highly responsive to changes in power needs, making them promising for use in automobiles and other portable power devices. The electrolyte of a PEM cell–the layer responsible for conductivity–is a polymer membrane, commonly consisting of perfluoroalkyl sulfonic acid (PFSA) polymers. In place of the PFSA polymers, perfluoroalkyl arylsulfonimide (PFSI) polymers are expected to improve the efficiency of PEM fuel cells with better stability and proton conductivity. The trifluovinylether (TFVE) aryl perfluorosulfonamide monomer is a new PFSI monomer proposed to fulfill these benefits once polymerized. The previous …

Examining The Impact Of The Covid-19 Pandemic On Older Adults' Activity Participation And Mode Usage In A Rural State: A Case Study Of Arkansas, Arna Nishita Nithila, Suman Kumar Mitra, Alishia Juanelle Ferguson, Michelle Gray, Jennifer D. Webb

Civil Engineering Faculty Publications and Presentations

The objective of the study was to investigate the impact of the COVID-19 pandemic on the activity participation and mode usage of older adults residing in Arkansas, a predominantly rural state. Leveraging primary data collected from 832 older adult participants, the study employed Latent Class Analysis (LCA) to capture older adults' heterogeneity in travel behavior and found three distinct classes: Pandemic-affected minimal travelers, Unaffected non-commuter car users, and Unaffected commuter car users, showing different levels of their activity participation, mode usage during the pandemic and varying the pandemic's impact on their trips. To understand these variations in light of the …

Operating Room Forcing Function, Olivia Rankin, Makena Moragne, Sasha Rovinsky

Biomedical Engineering

The Operating Room Forcing Function system aims to address the persistent issue of wrong-site, wrong-procedure, and wrong-patient errors (WSPEs) in surgical settings. WSPEs are largely caused by circumvention of the timeout procedure (a planned pause before incision to stop and confirm crucial details of the procedure to be performed known as ‘The Universal Protocol’). The goal set forth by our sponsor, Dr. Robert Turbow, is to develop a lock-out mechanism that requires a timeout to be performed by all appropriate personnel before an operation can begin.

Hospitals are extremely complex systems with competing values, productivity pressures, fast paced work, tight-coupled …

The Suture Guide, Nicole Schnettler, Ciara Murphy, Jocelyn Corona Cabrera

Biomedical Engineering

In the surgical field and specifically wound closure, there is a growing demand for techniques that allow surgeons to quickly, accurately, and ergonomically close surgical wounds while still optimizing patient recovery and not compromising the cosmetic appearance in wound closure. Currently more advanced and developed products exist for laparoscopic suturing, but not for superficial suturing. This project aims to find a way to close the most superficial layer of the skin in surgical incisions that is faster and more comfortable than current suturing techniques. The design process began with stakeholder interviews and market research, identifying key shortcomings of current manual …

Environmental Life Cycle Assessment Of Class A Biosolids Production Using Conventional And Low-Cost, Low-Tech Processes At Small Water Resource Recovery Facilities, Janna Brown, Robert Handler, Jennifer G. Becker, Eric Seagren

Michigan Tech Publications

Producing Class A biosolids that can be distributed or land-applied without restriction is a beneficial way to reuse wastewater treatment solids. For small water resource recovery facilities (WRRFs) in particular, low-cost, low-tech (LCLT) processes may be an appealing alternative to conventional technologies for producing Class A biosolids, such as processes to further reduce pathogens (PFRPs). Conventional Class A biosolids treatment processes tend to be energy-intensive and involve complex equipment and operations. However, a systematic comparison of the overall sustainability of conventional processes and LCLT alternatives for producing Class A biosolids to aid decision makers in selecting treatment processes is not …

Operational Energy Education: A Thematic Analysis Of Knowledge Area Needs And Educational Gaps, Nana Hene

Theses and Dissertations

Operational Energy (OE) education is vital for national security, military readiness, and fuel energy efficiency. This thesis analyzes the current landscape of OE education and identifies key gaps in awareness, energy knowledge, and curriculum structure. Through a reflexive thematic analysis of interviews with Subject Matter Experts (SMEs), the study underscores the necessity of integrating OE concepts into both educational and professional training programs. A framework is proposed to enhance OE education across various levels in the Air Force, aiming to cultivate a more energy-conscious and strategically prepared force. The findings highlight the critical need for targeted training, curriculum enhancements, and …

Military Entrance Processing Station Location And Capacity Optimization, Micah A. Hurst

Theses and Dissertations

This research optimizes the number, placement, and capacity of Military Entrance Processing Stations (MEPS) to minimize applicant and recruiter travel and improve recruitment efficiency. Using mixed-integer programming, it develops capacitated facility location (CFLP) and maximal covering location (MCLP) models, considering facility capacity, budget, and geographic coverage. Computational testing and scenario evaluations highlight opportunities to reduce travel and balance capacity. For example, the CFLP model adds three new MEPS, reducing annual applicant travel by 1.2 million miles in Florida and Texas and 1.0 million in California, while increasing accessibility within 60 miles of a MEPS. This data-driven approach provides USMEPCOM with …

Practical Estimation Of Action-Generation Mechanisms In Repeated Games, Vladimer Kellachow Iii

Theses and Dissertations

The goal of this research is to gain insight into how players of a game learn their strategy during the course of repeated play. The study employs the Experience Weighted Attraction (EWA) model, developed by Dr. Colin F. Camerer and Dr. Teck-Hua Ho, as the foundational behavioral framework. Using historic observed strategy decisions, the parameter values that define an opponent’s learning process are updated using various inference methods.

Atmospheric Water Generation: Experimental Observations And Assembly Of An Artificial Neural Network, Houston Hoss Anderson

Theses and Dissertations

This research investigated the performance of a Tsunami T50 Vapor Compression Cycle styled Atmospheric Water Generation (AWG) machine operated under ambient conditions in Dayton, Ohio. Water yield from the device was measured volumetrically and these values are paired with respective weather data, collected from a local monitoring station, to build an Artificial Neural Network in MATLAB and JMP software. Water yield varied over the course of this study but averaged 1.2L and maxed at 5L for 4-hour operating periods. This work is part of a 3-year project; future data is needed to enhance both training and validation of the model …

A Case Study N Modeling The Human Behavior Of Basic Fighter Maneuvers Using Mbse, Josiah J. Franklin

Theses and Dissertations

As fighter aircraft become more complex and technology, such as autonomy, is introduced, it is essential to anticipate the critical tasks and information pilots need to accomplish their mission with these new systems. Fighter pilots operate in highly demanding situations where the consequences of failure are severe and require their systems to provide the right information for the task. Traditionally, these designs are informed through Critical Task Analyses of existing systems. This research produced a method for modeling critical task analysis and information requirements using model-based systems engineering. The scenario was a fighter aircraft conducting basic fighter maneuvers in a …