Engineering Commons^™

Crisis Management In Tourism Complexes With Emphasis On Sustainable Development Approach Case Study: Jihad Daneshghahi Tourism Complex In Kermanshah, Iran, Aeizh Azmi

Al-Mustaqbal Journal of Sustainability in Engineering Sciences

Problem statement: Crisis management in tourist complexes can play a crucial role in increasing tourist attraction and mitigating damages resulting from natural hazards. The Jihad University Tourism Complex in Kermanshah is a tourist destination, and this study aims to present a crisis management model for this complex.

Question: What should be the crisis management model for the Jihad University Tourism Complex in Kermanshah?

Objective: This study aimed to propose a crisis management model for the Jihad University Tourism Complex in Kermanshah.

Methods: A questionnaire was used to collect research data. Approximately 50 individuals were selected as the research population and …

Enhancing Water Sustainability In North Africa: Literature Review And Synthesis Of Current Knowledge Gaps In Sudan, Osman M. A. Adam, Aaron R. Mittelstet, Derek M. Heeren, Troy E. Gilmore

Department of Agricultural and Biological Systems Engineering: Presentations and White Papers

This study delves into the critical role of groundwater in addressing global water challenges, with a focus on the Nubian Sandstone Aquifer System (NSAS) in North Africa. Groundwater constitutes a source of potable water, irrigation, and industrial use, especially in arid regions where surface water is limited. We analyzed the status of water quantity, withdrawals, recharge, and geological characteristics in the NSAS, specifically in Sudan, Egypt, Libya, and Chad. Though the NSAS is largely an untapped resource, we evaluated various scenarios to determine the quantity of cropland that can be sustainably irrigated. The NSAS is located in an arid region, …

Examining The Progress In Additive Manufacturing In Supporting Lean, Green And Sustainable Manufacturing: A Systematic Review, Catherine Maware, Rumbidzai Muvunzi, Tinotenda Machingura, Ilesanmi Daniyan

Institute for Sustainable Manufacturing Faculty Publications

The quest for waste reduction and the development of manufacturing processes that meet the economic, social and environmental requirements necessitate this study. Additive manufacturing is an emerging digital technology that can be used to seamlessly develop a product through material deposition in layers. The study aims to investigate the progress made in the development of additive manufacturing to support lean, green and sustainable manufacturing. The study employs a systematic literature review approach, specifically the Preferred Reporting Items for Systematic Reviews and Meta-Analysis (PRISMA). A total of 158 articles identified from different academic databases that detailed empirical, conceptual and theoretical findings …

Influence Of The Work Environment On Workplace Learning Of Undergraduate Engineering Interns, Yashin Brijmohan

Dissertations and Doctoral Documents, University of Nebraska-Lincoln, 2023–

Internships are an impactful form of workplace learning that helps undergraduate engineering students acquire and enhance competencies to improve their employability. However, the nuances about what makes an internship successful are not well understood. Furthermore, learning during engineering internships has not been thoroughly researched. Previous literature has mostly focused on internship outcomes, and there is little discussion on how to improve internship experiences to achieve the expected outcomes. Thus, this qualitative study explored the workplace learning environment of internships and how engineering undergraduate students engaged with workplace learning. The study has produced a comprehensive framework that illustrates important factors in …

Integrating Remote Sensing And Machine Learning To Determine Past, Current And Future Crop Water Use From The Nubian Sandstone Aquifer System, Moaz Ishag

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

The agriculture sector is a significant consumer of water, and sustainable water use begins with monitoring irrigated land. Delineating irrigated land supports decision-makers and promotes the sustainable use of this crucial resource. This study focuses on the Nubian Sandstone Aquifer System (NSAS), the largest aquifers in the world, which spans Egypt, Sudan, Libya, and Chad. The study aims to: 1) quantify the increase in irrigated hectares (both pivot and non-pivot) from 2000-2001 to 2023-2024; 2) identify major irrigated crop types and their water requirements; and 3) quantify groundwater crop water use from the NSAS using remote sensing via the Google …

Assessing Soil Properties For Optimized Irrigation Development In Sudan, Northern Africa, Suhib Hamid, Derek M. Heeren, Aaron R. Mittelstet, Saleh Taghvaeian, Randall S. Ritzema

Department of Agricultural and Biological Systems Engineering: Presentations and White Papers

Sustainable irrigation methods maximize agricultural productivity in Northern African countries like Sudan. This project evaluates soil properties to develop optimized irrigation strategies for Sudan's arid and semi-arid climate. Assessing soil characteristics such as texture, infiltration rates, and nutrient content informs the selection of modern irrigation systems. Data from 3,192 locations, collected using GPS and ring infiltrometers for infiltration rates, alongside laboratory analyses for soil properties, were employed. A ranking system determined suitable irrigation systems for specific soil classes, considering factors like slope, wind, crop tolerance, available water capacity (AWC), drainage, germination, capital cost, labor cost, maintenance, and evapotranspiration (ET). The …

Skilled Labor Shortage In Construction: Deep Dive Of Impactful Factors And Influential People Of The Decision-Making Process, Nicholas B. Hardy

LSU Doctoral Dissertations

The skilled labor shortage is well documented from a historical perspective via studies focusing on various construction trades such as carpentry, mechanical, electrical, plumbing, and tile setters. Causes of such shortages such as industry image, college as a preferred choice after high school, and construction being a last resort have been investigated extensively. Consequently, possible solutions ranging from amplifying shop classes in high school to intensifying recruiting efforts for union training programs have all been addressed throughout the last 40 years. However, recent studies have focused on identifying the magnitude and reach of the skilled labor gap while limited attention …

A Strategic Framework For Attaining Golden Leed Certification For Resorts, Mohamad Soliman, Hadi Jawad, Mariam Younes, Oussama El Hamaoui, Saadeddine Ramadan

BAU Journal - Science and Technology

The contemporary landscape of engineering is witnessing a pivotal shift towards sustainability, encapsulated in the catchphrase "GO GREEN". This global trend underscores a strategic emphasis on sustainable design, where engineering projects prioritize a delicate balance among environmental, societal, and economic considerations.” However, a persistent challenge in construction projects lies in their tendency to neglect environmental impact, contributing to increased contamination levels. This paper aims to introduce the "Lodge in the Green" project, meticulously aligned with LEED Certification principles. LEED, or Leadership in Energy and Environmental Design, stands as the foremost green building rating system, highlighting its relevance in contemporary sustainable …

A Comparative Study Of Local And Global Construction Materials Sourcing Strategies For Road Projects In Nigeria, Araoye Olarinkoye Ajiboye, Micaiah Zhitsu Silas, Chinedu Chimdi Adindu, Elijah Aina Alhassan, Stephen Sunday Kolo

CSID Journal of Infrastructure Development

This study is a comparative analysis of local and global sourcing strategies to determine the impact of strategic material sourcing on road construction project performance. The study aimed to evaluate the effects of material-sourcing strategies on the performance of road construction companies in Nigeria. A mixed-methods approach was used, incorporating both qualitative and quantitative research. Data collection involved sampling techniques using structured questionnaires and oral interviews. Regression analysis evaluated the relationship between strategic material sourcing and road construction performance. The results revealed that 87.5% of the materials used by road construction companies in the study areas were sourced from the …

Appraising Critical Success Factors In Sustainable Housing Projects: A Comparative Study Of Ppp Modalities In Saudi Arabia, Ahmed Gouda Mohamed

Civil Engineering

This study examines the critical success factors (CSFs) crucial for the effective deployment of public-private partnership (PPP) models in sustainable housing projects in the Kingdom of Saudi Arabia (KSA), underpinning the nation's Vision 2030. Through a robust methodology that incorporates a profound literature review, structured interviews, and a survey involving key stakeholders, the study prioritizes fourteen significant CSFs integral to PPP efficacy. Employing Analytical Hierarchy Process analysis, key outcomes underscore the paramount importance of technical aspects with an emphasis on sustainability, tailoring risk-sharing and allocation to encompass green technologies and eco-friendly practices, and economic stability in the light of long-term …

Assessing The Social, Economic, And Environmental Impacts Of A Multifunctional Crop: The Case Of Moringa Oleifera, Yoel Gebrai

USF Tampa Graduate Theses and Dissertations

Multifunctional crops have the potential to support societal goals toward more sustainable production of food, feed, and fuel. The production and processing of multifunctional crops, with their numerous uses and coproducts, is accompanied by social, economic, and environmental impacts that need to be systematically evaluated to avoid unintended consequences from widespread adoption. Complexity emerges in the presence of multifunctionality, and counterintuitive system responses can occur. As a result, this dissertation has sought to enhance and apply frameworks to assess multifunctional crop sustainability holistically. Systems thinking and life cycle approaches are applied to a multifunctional crop case study, Moringa oleifera (MO). …

Anti‑Freezing Performance Of Cement-Stabilized Mixture For Recycled Aggregate From Solid Construction Waste, Zheng Jiajia, Zhang Laijun, Wang Xihui, Xie Jianwei, Chen Zhiyong

Journal of China & Foreign Highway

This paper investigated the effects of particle size and content of recycled aggregate on the anti-freezing performance of cement-stabilized recycled aggregate mixture,so as to provide a reference for the fine utilization of recycled aggregate with different particle sizes.The basic performance indexes of recycled aggregates with different particle sizes were tested,and the optimum moisture content and maximum dry density were determined by compaction test.The specimens were prepared with 4% cement content,and the anti-freezing performance of the mixture was evaluated by testing the unconfined compressive strength loss of the mixture after the freeze-thaw cycle.The results show that the optimum moisture content increases,and …

A Country-Level Primary-Final-Useful (Cl-Pfu) Energy And Exergy Database: Overview Of Its Construction And 1971–2020 World-Level Efficiency Results, Paul E. Brockway, Matthew Kuperus Heun, Zeke Marshall, Emmanuel Aramendia, Paul Steenwyk, Thomas Relph, Michelle Widjanarko, Jeonghoo (James) Kim, Anjana Sainju, Julian Irtube

University Faculty Publications and Creative Works

Societal exergy analysis examines the flows of energy and exergy through societies, from primary (e.g. oil) to final (e.g. gasoline) to useful (e.g. propulsion) energy stages. By extending the study of energy to the useful stage, new insights into the under-represented role of energy in economic growth have been made. However, currently (a) country coverage is patchy and incomplete, (b) available data are based on varying methods and assumptions including efficiencies based on economic rather than engineering data, and (c) datasets are constructed using piecemeal computational approaches. To address these gaps, we construct a country-level primary-final-useful (CL-PFU) energy and exergy …

Modified Method For Assessing The Required Expenditures And Estimated Time Of Hard Coal Mine Liquidation, Andrzej Chmiela, Małgorzata Wysocka, Adam Smoliński

Journal of Sustainable Mining

The restructuring of hard coal mining requires significant budgetary expenditures. A comprehensive scientific approach may facilitate the rationalisation and minimisation of mine closure costs. This study proposes a method for the preliminary estimation of the costs and time required for the potential liquidation of a hard coal mine. In addition to a literature review, a statistical analysis and a case study, personal interviews were conducted with individuals with direct management over the restructuring, reclamation and liquidation processes pertaining to mines undergoing closure.

The assessment method is based on an analysis of the mine liquidation costs, divided into successive years of …

Assessment For Sustainable Transportation Systems In Egypt, Hagar Mohamed Fares

Theses and Dissertations

The assessment of a sustainable transportation system poses a significant challenge for local governments, as it dramatically influences the promotion of environmentally friendly modes of transportation with the objective of safeguarding the public's welfare and health in their daily activities. The integration of such assessment should be implemented from the initial stages of system planning to its operational and maintenance phases, particularly in light of the increasing number of urban development activities nationwide. In order to facilitate decision-making processes, it is imperative to establish an efficient rating system that incorporates cultural and social constraints and comprehensively considers the three dimensions …

A Comprehensive Study On The Impact Of Human Hair Fiber And Millet Husk Ash On Concrete Properties: Response Surface Modeling And Optimization, Naraindas Bheel, Muhammad Alamgeer Shams, Samiullah Sohu, Abdul Salam Buller, Taoufik Najeh, Fouad Ismail Ismail, Omrane Benjeddou

Department of Civil and Environmental Engineering: Faculty Publications

Revolutionizing construction, the concrete blend seamlessly integrates human hair (HH) fibers and millet husk ash (MHA) as a sustainable alternative. By repurposing human hair for enhanced tensile strength and utilizing millet husk ash to replace sand, these materials not only reduce waste but also create a durable, eco-friendly solution. This groundbreaking methodology not only adheres to established structural criteria but also advances the concepts of the circular economy, representing a significant advancement towards environmentally sustainable and resilient building practices. The main purpose of the research is to investigate the fresh and mechanical characteristics of concrete blended with 10–40% MHA as …

Implications Of The Covid-19 Pandemic On The Management Of Municipal Solid Waste And Medical Waste: A Comparative Review Of Selected Countries, Ahmed Osama Daoud Dr., Hoda Elattar Eng., Gaber Abdelatif Eng., Karim M. Morsy, Robert W. Peters, Mohamed K. Mostafa Dr.

Civil Engineering

No abstract provided.

Tracking Mining Company Electric Vehicles For Sustainable Development Optimization Using Distributed Ledger Technologies, Teodora Hristova

Journal of Sustainable Mining

It is established that based on the industrial revolutions towards Industry 5.0, the population of the Earth and its well-being are increasing. To preserve and improve living conditions the development in all spheres of life is by the paradigm of sustainable development. Through the prism of the mining industry, one step could be the introduction of circular economy measures for digitized tracking of materials, repairs, consumed electricity, safety, and finances. Implementing of electric cars is an option to achieve this goal through automation, manageability, and data traceability via Industry 4.0 technologies. Such are blockchain technologies, IoT, V2V, and others. For …

Moringa Connect: Design And Fabrication Of The Drum For A Moringa Leaf Dryer Prototype, Braden Deck

Construction Management

Moringa Connect, founded in 2013 by MIT alumnus Kwami Williams, supports over 5,000 African farmers, primarily in Ghana, by providing a direct sales, manufacturing, and shipping platform for nutrient-dense moringa leaves. Despite significant social and economic benefits for the local farmers, the current drying process in Accra, Ghana, is inefficient, requiring extensive human handling. To address this, a team of five Cal Poly students partnered with Moringa Connect to design a prototype rotating hopper to streamline the drying process and reduce production costs. The project faced numerous challenges, including material sourcing constraints in Ghana and the need for extensive fabrication …

Characterization Of High Albedo Ground Surface Treatments For Energy Harvesting By Bifacial Photovoltaic Power Plants, Roma C. Chatripally, Matthew Honda, James Vance

Materials Engineering

Bifacial photovoltaic (bPV) cells have higher solar efficiency than monofacial photovoltaic (mPV) cells due to having two sides of active layers. bPV cells also require less space to produce equivalent electricity, which is useful for solar farms that want to maximize energy output per unit area. Placing a sheet of highly reflective material on the surface beneath bPV cells further increases their efficiency due to increasing the amount of solar radiation that reaches the underside of the bPV cells. This study explores the effects of natural outdoor weathering, solar altitude angle, and accelerated exposure to UV radiation on the albedos …

Lithospheric Evolution Of The South-Central United States Constrained By Joint Inversion Of Receiver Functions And Surface Wave Dispersion, Tuo Wang, Stephen S. Gao, Kelly H. Liu, Kevin L. Mickus, Ling Chen

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

In the present study, we use broadband seismic data recorded by 190 stations of the EarthScope program's Transportable Array to construct a 3-D shear wave velocity model for the upper 180 km using a non-linear Bayesian Monte-Carlo joint inversion of receiver functions (RFs) and Rayleigh wave dispersion curves. Ambient noise and teleseismic data are used for obtaining Rayleigh wave phase velocity dispersion curves. A resonance removal filtering technique is applied to the RFs contaminated by reverberations from the thick sedimentary layers that cover most of the region. Our observations of the higher crustal shear velocities (∼3.40 km/s) beneath the Sabine …

Feasibility Of Implementing A Construction Project In An International Country, Kristina Poliseri

Construction Management

This paper examines the execution of an international service project involving the construction of a complex system. It explores three distinct approaches assuming a fully designed system: building the system in the U.S. and shipping it internationally, having system pieces constructed entirely in the destination country prior to arrival for assembly, and developing a prototype in the U.S. followed by the construction of a full-scale system in the international country. Each method presents unique advantages and challenges. Building in the U.S. ensures high quality, advanced technology, and meeting tolerances, however, leads to significant fees, shipping costs, and logistical complications. Constructing …

Advanced Acoustic Emission-Based Shm For Concrete Structures: Real-Time, High-Precision Imaging Of Crack Geometry And Damage Sourcetype Using Moment Tensor Inversion, Seyyedmaalek Momeni, Thomas Schumacher, Lindsay Linzer, Brice Lecampion

Civil and Environmental Engineering Faculty Publications and Presentations

In this paper, we introduce a novel automated and high-precision acoustic emission (AE) monitoring algorithm and the software SIMORGH, which is suitable for structural health monitoring (SHM) of civil structures. Initially developed for laboratory-scale hydraulic fracture monitoring, this core software has been effectively scaled up to meter-level applications and is compatible with heterogeneous media such as concrete. It is designed to work with various standard data formats and is handles both trigger-based and continuous data. We present initial results from implementing this software in the AE monitoring of two 4.88-meter-long concrete beams in a laboratory setting, comparing it with manually …

Electrical Design For Moringa Leaf Dryer, Jake Weiss

Construction Management

The objective of this project is to provide a methodology to the electrical scope of mechanical leaf dryers. This dryer was particularly designed for an off-grid farm in New Longoro, Ghana in which resources and materials are limited. The electrical system must be designed so that it works with motors, variable frequency drives, worm gears, and other materials that could be sourced in Ghana. The system should also draw minimal power so that remaining photovoltaic energy could be utilized on the farm. The system should be simplistic and repeatable for other farmers to utilize. By using both a numerical analysis …

Communication Challenges And Lessons Learned For An International Research And Development Project, Ryan Fehrenbach

Construction Management

This paper discusses the importance of communication for an International Research and Development project given the timeline it takes to accomplish. With a Cal Poly team of 5 students, 2 professors as advisors, an off-campus external advisor, and the Moringa Connect team in Ghana, many forms of communication were utilized and documented throughout the duration of the project. For a project of this magnitude, it was crucial to establish clear forms of communication from the first discussions of the project for both the internal Cal Poly team and the external team in Ghana. Implementing shared documents such as a deliverable …

The Santa Clara, 2024-05-10, Santa Clara University

The Santa Clara

No abstract provided.

Effect Of Waste Covid-19 Masks On Compaction Characteristics Of Silty-Clay Soil, Sydney K. Lawson

Honors College Theses

The present study aims to explore the effect of adding shredded waste Covid-19 masks to silty-clay soil on the soil’s compaction characteristics for beneficial use in embankment, the subgrade of roadways, or backfill. This was accomplished by using two different types of masks: blue surgical masks and KN95 masks. Both mask types were hand shredded into half-inch sections using safety-scissors. The maximum dry density (MDD) and optimum moisture content (OMC) are the two most important compaction characteristics, and they were determined by the Standard Proctor Compaction Test (ASTM D698 / AASHTO T99). The change of both the MDD and OMC …

Bibliometric Review Of The Landscape And Thematic Structure Of Research On Sustainable Mining In Asean, 1942–2022, Nathatai Janjirawatna, Sirisuhk Rakthin, Philip Hallinger

Journal of Sustainable Mining

This bibliometric review addressed the lack of consolidated information on the current state of sustainable mining in the ASEAN region. The review analyzed bibliographic data associated with 539 Scopus-indexed documents on sustainable mining in ASEAN nations published through the end of 2022. Descriptive statistics identified a great disparity in the scope of research on sustainable mining practices across the ASEAN countries. Surprisingly, a significant portion of the extant research on sustainable mining in the region has been authored by scholars from outside of ASEAN. Keyword analyses highlighted several emerging research topics including life cycle assessment, conservation of natural resources, climate …

Improvement Of Gravelly Laterite And Cement Stable Disposal In West Africa, Jin Haibing, Yi Zicheng, Zhuo Rong

Journal of China & Foreign Highway

Owing to poor gradation and high liquid limit and plasticity index，the application of gravel laterite on road paving is limited in West Africa.To overcome this issue，laterite granule combined with sand at different content was explored.The performance including the particle composition，limit water content and CBR value was investigated.The results indicate that sand treatment can improve the gradation，enhance the compactness，and reduce the plasticity index.The improved gravel laterite can meet the requirements of subbase，cushion，and base courses.Cement treatment can improve the mechanical properties of laterite grains.Cement and sand content affect the unconfined compressive strength significantly，with an optimal sand content range identified.Specifically，laterite granules mixed with …

Water Banking As A Strategy For The Management And Conservation Of A Critical Resource: A Case Study From Tunisia's Medjerda River Basin (Mrb), Aymen Sawassi, Roula Khadra, Brian Crookston

Civil and Environmental Engineering Faculty Publications

The increasingly adverse impacts of climate change (e.g., rainfall patterns, droughts, and floods), coupled with the ever-increasing water demands, are often translated into a contingent liability for water users' communities. Additional complexities arise due to competing priorities, water rights, and transboundary water sources. Therefore, conventional water management practices should shift toward more comprehensive and responsive integrative approaches, even for systems with limited data. Furthermore, water managers must prioritize dynamic and interactive management techniques for existing systems. One such management technique is water banking, which is the focus of this study. Herein, a dynamic interactive water allocation model, which encompasses the …