Engineering Commons^™

Seismic Azimuthal Anisotropy Beneath A Fast Moving Ancient Continent: Constraints From Shear Wave Splitting Analysis In Australia, Kailun Ba, Stephen S. Gao, Jianguo Song, Kelly H. Liu

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Seismic Azimuthal Anisotropy Beneath Australia is Investigated using Splitting of the Teleseismic PKS, SKKS, and SKS Phases to Delineate Asthenospheric Flow and Lithospheric Deformation Beneath One of the Oldest and Fast-Moving Continents on Earth. in Total 511 Pairs of High-Quality Splitting Parameters Were Observed at 116 Seismic Stations. Unlike Other Stable Continental Areas in Africa, East Asia, and North America, Where Spatially Consistent Splitting Parameters Dominate, the Fast Orientations and Splitting Times Observed in Australia Show a Complex Pattern, with a Slightly Smaller Than Normal Average Splitting Time of 0.85 ± 0.33 S. on the North Australian Craton, the Fast …

Using Nanomaterials As Excellent Immobilisation Layer For Biosensor Design, Azeez Olayiwola Idris, Seyi Philemon Akanji, Benjamin O. Orimolade, Foluke Omobola Grace Olorundare, Shohreh Azizi, Bhekie Mamba, Malik Maaza

Research outputs 2022 to 2026

The endless development in nanotechnology has introduced new vitality in device fabrication including biosensor design for biomedical applications. With outstanding features like suitable biocompatibility, good electrical and thermal conductivity, wide surface area and catalytic activity, nanomaterials have been considered excellent and promising immobilisation candidates for the development of high-impact biosensors after they emerged. Owing to these reasons, the present review deals with the efficient use of nanomaterials as immobilisation candidates for biosensor fabrication. These include the implementation of carbon nanomaterials—graphene and its derivatives, carbon nanotubes, carbon nanoparticles, carbon nanodots—and MXenes, likewise their synergistic impact when merged with metal oxide nanomaterials. …

A Critical Comparison Of Interpolation Techniques For Digital Terrain Modelling In Mining, M. A. Raza, A. Hassan, M. U. Khan, M. Z. Emad, S. A. Saki

Mining Engineering Faculty Research & Creative Works

Digital modelling of a surface is crucial for Earth science and mining applications for many reasons. These days, high-tech digital representations are used to produce a high-fidelity topographic surface in the form of a digital terrain model (DTM). DTMs are created from 2D data-points collected by a variety of techniques such as traditional ground surveying, image processing, LiDAR, radar, and global positioning systems. At the points for which data is not available, the heights need to be interpolated or extrapolated from the points with measured elevations. There are several interpolation/extrapolation techniques available, which may be categorized based on criteria such …

Digital Twin Applications In 3d Concrete Printing, Yuxin Wang, Farhad Aslani, Arcady Dyskin, Elena Pasternak

Research outputs 2022 to 2026

The benefits of 3D concrete printing (3DCP) include reducing construction time and costs, providing design freedom, and being environmentally friendly. This technology is expected to be effective in addressing the global house shortage. This review highlights the main 3DCP applications and four critical challenges. It is proposed to combine 3D concrete printing with Digital Twin (DT) technology to meet the challenges the 3DCP faces and improve quality and sustainability. This paper provides a critical review of research into the application of DT technology in 3DCP, categorize the applications and directions proposed according to different lifecycles, and explore the possibility of …

Optimization Of Contractor’S Cash Flow Based On Subcontractor’S Payment Management Plans, Helen Ghali

Theses and Dissertations

In many counties, the construction industry relies heavily on outsourcing packages to execute their projects and expand their businesses to fit in the diverse market. Such extensive integration of outsourced subcontractors is becoming an influential factor in contractors' cash flow management. Accordingly, subcontractors’ price selection and their respective payment plans are important phenomena and pivotal components for the well-being of the contractor’s cash flow. Cash flow management is considered one of the most critical areas analyzed by contractors when getting into a project. Contractor’s cash flow is built from a pool of interrelated information depending on subcontractors, suppliers trade credit …

Estimating Solar Energy Production In Urban Areas For Electric Vehicles, Shaimaa Ahmed

Theses and Dissertations

Cities have a high potential for solar energy from PVs installed on buildings' rooftops. There is an increased demand for solar energy in cities to reduce the negative effect of climate change. The thesis investigates solar energy potential in urban areas. It tries to determine how to detect and identify available rooftop areas, how to calculate suitable ones after excluding the effects of the shade, and the estimated energy generated from PVs. Geographic Information Sciences (GIS) and Remote Sensing (RS) are used in solar city planning. The goal of this research is to assess available and suitable rooftops areas using …

Development And Prediction Of A Construction Price Index In Egypt, Mohamed Ramadan

Theses and Dissertations

Cost overrun is one of the most recurring issues in the Egyptian construction industry. The effect is not only on the construction industry ,but also influences the overall economy of a country like Egypt. Therefore, a construction performance index and a construction price index could be an integral indicator of the performance of the industry. These indices can reduce construction companies’ losses and decrease the effect of any sudden economic depression on the construction industry. Several research were conducted to predict construction indices. However, many uncertainties disturb the prediction of these indices. The trend in the prediction models for construction …

Acknowledgments Of Reviewers

Journal of Sustainable Mining

No abstract provided.

Solar-Light-Responsive Nanomaterials For The Photoelectrocatalytic Degradation Of Stubborn Pollutants, Benjamin O. Orimolade, Azeez O. Idris, Seyi Philemon Akanji, Folahan A. Adekola, Shohreh Azizi, Malik Maaza, Bhekie Mamba

Research outputs 2022 to 2026

Due to the ever increasing demand for cleaner water, a remarkable focus has been on the use of nanomaterials in wastewater treatment application. Photoelectrocatalytic (PEC) degradation, an advanced oxidation process which combines light and electrical energy, has been identified as a suitable technique capable of achieving total mineralisation of recalcitrant organic pollutants in wastewater. PEC degradation is non-selective, environmentally friendly and possesses great efficiency. The efficiency of PEC degradation has been enhanced by fabricating the photoanodes on a nanoscale with distinct morphologies. These nanostructured photoanodes have been extensively used for the removal of pharmaceuticals, dyes and phenolic water from wastewater. …

Greywater Treatment Using Integrated Sand Filtration With Ultrafiltration For Reuse, Aya El-Wattar

Theses and Dissertations

Membrane flux was observed and the two membrane sizes that achieved stable flux were chosen to be used in the later stages of the study. The chosen membranes were of 300 kDa and 400 kDa Molecular Weight Cutoff (MWCO).

The third phase of the study involved running the full system on synthetic greywater then on real greywater. The parameters investigated were COD, TSS, Turbidity and BOD₅. Total COD removal after sand filtration, 300kDa UF and 400 kDa UF was 65, 66 and 73.4% respectively. Total TSS removal after sand filtration, 300kDa UF and 400 kDa UF was 93.1, …

Version 2 Of The Global Catalogue Of Large Anthropogenic And Volcanic So2 Sources And Emissions Derived From Satellite Measurements, Vitali E. Fioletov, Chris A. Mclinden, Debora Griffin, Ihab Abboud, Nickolay Krotkov, Peter J.T. Leonard, Can Li, Joanna Joiner, Nicolas Theys, Simon Carn

Michigan Tech Publications, Part 1

Sulfur dioxide (SO2) measurements from the Ozone Monitoring Instrument (OMI), Ozone Mapping and Profiler Suite (OMPS), and TROPOspheric Monitoring Instrument (TROPOMI) satellite spectrometers were used to update and extend the previously developed global catalogue of large SO2 emission sources. This version 2 of the global catalogue covers the period of 2005-2021 and includes a total of 759 continuously emitting point sources releasing from about 10 ktyr-1 to more than 4000 ktyr-1 of SO2, that have been identified and grouped by country and primary source origin: volcanoes (106 sources); power plants (477); smelters (74); and sources related to the oil and …

Exploring The Characterization, Liberation And Flotation Response Of A Nigerian Low-Grade Copper Ore, Willie Nheta, Omoyemi O. Ola-Omole

Journal of Sustainable Mining

This study explores the characterization, liberation and flotation response of low-grade copper ore from Anka area, Zamfara state Nigeria. The ore was crushed, milled and sieved in accordance with BS 410 standard. It was characterized with XRD, XRF, SEM-EDS and AAS. Froth flotation was carried out with varying %solids, pH, retention time and collector dosages using SEX and sodium oleate. Particle size distribution of the ore shows its economic liberation between -150 and +106 µm while 80% passing corresponds to 175.7 µm using the Gaudin Schuhmann equation. However, according to metallurgical balance calculation, 63 µm proved to have the highest …

A Three-Year Academic Track Towards Literacy In Sustainable Development - A Computer Science Study Program Case, Kamilla Klonowska, Marijana Teljega, Daniel Einarson

Practice Papers

The 3-year Bachelor Programme in Software Development study program at Kristianstad University, Sweden, aims to integrate not only academic competencies and skills in subject courses but also critical thinking skills on how Computer Science can contribute to achieving the sustainable development goals.

Starting from an understanding of the sustainable development goals, students begin a process of designing and implementing applications for some specific goals. Through participation in various activities, students exchange the ideas and perspectives, and are challenged to consider multiple solutions to complex problems. The students' critical thinking, communicative abilities, and the ability to solve problems both individually as …

Inspire Newsletter Spring 2023, Missouri University Of Science And Technology. Inspire - University Transportation Center

INSPIRE Newsletters

No abstract provided.

Engineering Faculty And Staff Inclusive Excellence Training: Broadening Engineering Pedagogy For All, Mohammad Moin Uddin, Keith Johnson

Practice Papers

As our classrooms become more and more diverse, the need for cultural competency in engineering faculty is more important than ever. Cross-cultural competency has been named among the 10 most important skills for the future workforce. Historically there is a lack of cultural diversity at East Tennessee State University. The university did not offer any formal training opportunity for faculty and staff in cultural competency. As such, faculty effort in cultural pedagogy is minimal resulting in persistent achievement gaps among culturally diverse students. In this project we have developed and implemented an inclusive excellence cultural competency training program primarily for …

The “Who” In Engineering: Sociotechnical Engineering As Memorable And Relevant, Diana A. Chen, Marissa H. Forbes, Gordon D. Hoople, Susan M. Lord, Joel Alejandro Mejia

School of Engineering: Faculty Scholarship

Does emphasizing the role of people in engineering influence the memorability of engineering content? This study is part of a larger project through which our team developed a new undergraduate energy course to better reflect students’ cultures and lived experiences through asset-based pedagogies to help students develop a sociotechnical mindset in engineering problem solving. In this study, students in the class were invited to participate in semi-structured interviews (n=5) to explore our effectiveness in helping them develop a sociotechnical mindset around energy issues and conceptualize engineering as a sociotechnical endeavor. This study focuses on an activity during the interview where …

Engineering Education In Hong Kong Secondary Schools - The Applied Learning Course Approach, Ken Hui

Staff Publications

In Hong Kong, the efficacy of engineering education in secondary schools is always difficult to measure. This is mainly because there are limited engineering-oriented subjects and few teachers with backgrounds in engineering. Engineering education is often infused into the curriculum of secondary schools through science, technology and mathematics (STM) subjects. Students’ involvement in engineering related school-based and extracurricular activities are limited. Only a few technical schools in Hong Kong are offering engineering-oriented subjects such as Electronics & Electricity and Technology Fundamentals.

Some previous studies have identified that the lack of engineering education in secondary schools may affect the students’ aspiration …

Application Of Metagenomic And Molecular Microbiology Techniques To Elucidate Sources Of Fecal Pollution And Anthropogenic Antibiotic Resistance Genes To Surface Water: A Step Towards A “One Health” Approach To Watershed Management, Mehedi Hasan Tarek

Graduate Theses, Dissertations, and Problem Reports (ETD)

The use of fecal indicator bacteria, such as Escherichia coli, is a widely established regulatory and monitoring practice to detect surface water contamination associated with fecal pollution. However, the detection or quantification of fecal indicator bacteria alone does not accurately inform the sources of fecal pollution. The development of molecular and metagenomic methods that target the DNA of microorganisms has resulted in a host of new tools for monitoring fecal pollution and its sources, as well as for understanding emerging microbial threats, such as antimicrobial resistance. Antimicrobial resistance is a critical “One Health” challenge presenting a high risk to …

Understanding Emerging Travel Behavior In New York City, Md Amdad Hossen

Graduate Theses, Dissertations, and Problem Reports (ETD)

Many large cities face significant challenges in providing safe, economical, equitable, reliable, and efficient mobility services. Moreover, mobility service options have been changing unprecedentedly due to the advent of emerging mobility services. Understanding the impacts of emerging mobility services (e.g., for-hire vehicles, bike sharing) on other travel modes (e.g., transit, non-motorized modes, personal car) and evolving travel behavior is critical to promote sustainable modes for urban residents and reduce auto-dependency. New York City (NYC) has been conducting annual mobility survey since 2017 to understand the emerging travel behavior and mode choice characteristics. This dataset presents a unique opportunity for conducting …

A Methodology For Statistical Mean Wave Climate Regime Characterisation In Oceanic Islands: The Case Of The Southern Coast Of Tenerife, Emilio Megías, Manuel García-Román

Journal of Marine Science and Technology–Taiwan

Oceanic islands of volcanic origin tend to have peculiar characteristics, such as: exposure to many wave directions; grouping in archipelagos; steep coastal slopes; and small coastal shelves. All these features require certain considerations in wave climate studies. These types of studies, when wave spectra are not available and have to be performed with parametric data, can be unreliable without an adequate systematic treatment. In this work we propose a methodology consisting of pre-classification according to the peak period and subsequent separation into different sectors according to the geographical fetch. The island of Tenerife is the case study, and in particular …

Histomorphology Of The Distal Urogenital Ducts In The Male Northern Crawfish Frog, Rana Areolata Circulosa (Anura: Ranidae), S.E. Trauth, R.G. Neal

Journal of the Arkansas Academy of Science

We examined the microanatomy of the distal urogenital ducts in the male Northern Crawfish Frog (Rana areolata circulosa) from a small sample (n = 5) collected in February and March from central Arkansas over a 5-year period (2017–2022). Specifically, we sought information on the following structures: (1) the paired Wolffian (urogenital) ducts caudally from the kidneys to their merging with the urodeum of the cloaca, (2) the paired seminal vesicles (sperm storage structures), and (3) the paired Müllerian ducts and glands. This study provides new information on these urogenital ducts and promotes a clearer understanding of this anatomical region for …

Biocybersecurity And Deterrence: Hypothetical Rwandan Considerations, Issah Samori, Gbadebo Odularu, Lucas Potter, Xavier-Lewis Palmer

Community & Environmental Health Faculty Publications

Digitalization and sustainability are popular words within modern disciplines as practitioners each look toward the future of their respective fields. Specifically for the African continent, which is making great strides in developmental targets, those two terms are central to core aspects of policy initiatives that may foster cooperation across its varied lands and nations. One of the underlying challenges that confront Africa is a lack of strong regional integration across socioeconomic and political programs; there is value in African regions having more regional connectedness. We assess the rate of regional integration and development in Africa and discuss how to alleviate …

Informal Learning As Opportunity For Competency Development And Broadened Engagement In Engineering, Madeline Polmear, Shannon Chance, Roger Hadgraft, Corrinne Shaw

Books/Book chapters

Informal learning is increasingly being recognized as a way to complement the formal curriculum within engineering and provide additional opportunities for competency development while engaging diverse students. Learning about engineering occurs throughout life, via experiential and spontaneous opportunities that inform our understandings of the world. Learning is not confined to the engineering curriculum and class time but, rather, continues informally and implicitly throughout the daily lives and activities of university students. Often framed in contrast to formal learning, informal learning is more as it represents a significant portion of students’ time and effort and contributes to their persistence, competence development, …

Bridgewater Magazine, Volume 33, Number 2, Fall 2023, Bridgewater State University

Bridgewater Magazine

Taking Flight: Meet BSU students and alumni from the growing Aviation Science Program. Also in this issue: Two faculty members research the lives and times of early Black and Indigenous local citizens; Faculty researchers recount details of two of the enslaved in Colonial Bridgewater; and Alumna finds career satisfaction in helping others.

Swosu Research And Scholarly Activity Fair 2023, Swosu Office Of Sponsored Programs

SWOSU Research and Scholarly Activity Fair Programs

On behalf of the members of the University Research and Scholarly Activity Committee (USRAC) and the Office of Sponsored Programs (OSP) at Southwestern Oklahoma State University (SWOSU) - Welcome to the Thirtieth SWOSU Research and Scholarly Activity Fair! There are 77poster presentations and 2 oral presentations involving over 130 student and faculty researchers, writers, presenters, artists, collaborators, and faculty sponsors encompassing activities from the SWOSU College of Pharmacy; SWOSU School of Nursing & Allied Health Sciences; and SWOSU Departments of Allied Health Sciences; Art, Communication & Theatre; Biological Sciences; Business; Computer Science; Chemistry & Physics; Engineering Technology; Language & Literature; …

A Critical Approach To Engineering Mathematics Activities For Sustainable Development, Matheus Oliveira De Andrade, Mariam Makramalla

Practice Papers

Engineering projects are frequently experienced through the complexity of knowledge co-production between experts and local communities. This involves an ability to work critically and creatively within unfamiliar epistemologies, drawing from quantitative, social and scientific methods to realise high-impact solutions. In this work-in-progress paper, we put forward a prototype for a case-control study aiming to evaluate student buy-in and learning outcomes for a cross-cultural implementation of critical mathematics approaches contextualised by sustainability challenges. We outline and discuss aspects of mathematical modelling activities that can scaffold an environment where human subjectivity amplifies the quality and relevance of quantitative arguments. As proof-of-concept, we …

Critical Space Infrastructure: A Complex System Governance Perspective, Adrian V. Gheorghe, James C. Pyne, Joseph Sisti, Charles B. Keating, Polinpapilinho F. Katina, William Edmonson

Engineering Management & Systems Engineering Faculty Publications

This paper examines the applicability of Complex System Governance (CSG) to advance the Critical Space Infrastructure field (CSI). CSI encompasses space related hardware, workforce, environment, facilities, and businesses that are necessary for societal well-being. CSI is increasing in importance as more societal serving systems are becoming dependent on CSI to operate. Given this increasing dependence on CSI, societal sectors are increasingly at risk should something go wrong with CSI upon which they depend. CSI has been developing is a fragmented way and lacks coherent organization. CSG is focused on design, execution, and evolution of system functions that provide for communications, …

Data-Driven Strategies For Pain Management In Patients With Sickle Cell Disease, Swati Padhee

Browse all Theses and Dissertations

This research explores data-driven AI techniques to extract insights from relevant medical data for pain management in patients with Sickle Cell Disease (SCD). SCD is an inherited red blood cell disorder that can cause a multitude of complications throughout an individual’s life. Most patients with SCD experience repeated, unpredictable episodes of severe pain. Arguably, the most challenging aspect of treating pain episodes in SCD is assessing and interpreting the patient’s pain intensity level due to the subjective nature of pain. In this study, we leverage multiple data-driven AI techniques to improve pain management in patients with SCD. The proposed approaches …

Advancing An Integrative Perspective Of Identity In Engineering Education (Chapter 9), James L. Huff Ph.D., Monique S. Ross Ph.D.

Faculty Research and Publications

Existing research has used identity as a theoretical construct to help us understand a wide array of phenomena, such as engagement and persistence in engineering. By understanding the personal, social, and sociocultural forces that operate in the developmental processes of an individual, we understand how they come to make sense of who they are. Further, we come to learn how they position themselves in relation to what it means to be an engineer. However, identity research in engineering education has supported a diffuse set of theoretical perspectives that do not organically coalesce. This chapter advances an integrated conceptualization of engineering …

Microplastic Contamination In The Coastal Environment: A Case Study From The Mae Klong River, Samut Songkhram, Pattraporn Chaisanguansuk, Suphak Ploenbuppa, Thitiphan Assawincharoenkij, Sumet Phantuwongraj, Akkaneewut Jiraphinyakul

Applied Environmental Research

To investigate the microplastic contamination in the coastal area in Samut Songkhram, we collected sediment samples from six locations in mangrove forests along the Mae Klong River estuary (MK) and the nearby Khlong Khon canal (KK). The microplastics were extracted by ZnCl2 density separation and subsequently H2O2 digestion. The microplastic abundance and physical properties, including their size, color, and shape, were determined under the binocular microscope. The selected microplastic samples were analyzed by µ-FTIR spectroscopy to identify their polymer types. Microplastic concentrations were c. 580 and 1690 items kg-1 d.w. in the samples from MK and KK. The lower microplastic …