Engineering Commons^™

The Return Of Labor-Based Grading Contracts, Erica J. Marti

UNLV Best Teaching Practices Expo

Despite best attempts, grading can be very subjective when it comes to determining quality. For certain courses, the process is just as important as the product, but often the grade is based mainly on the quality of the product and doesn’t take the labor or process into account. One alternative to standard grade systems is labor-based grading or contract grading. In this system, students meet certain requirements to earn a certain grade. If students meet the criteria for the assignment, it counts toward the contract. If not, they can revise, reflect and resubmit. With this format, students can focus on …

Learning Retention Through Glossary Development, Haroon Stephen

UNLV Best Teaching Practices Expo

The teaching practice is to engage students in glossary development. It is adopted to increase student learning retention of civil engineering terms. Learning retention is the process of transferring new information into long-term memory. This teaching practice was implemented in two courses during summer and fall 2021. The benefits of this practice were assessed using a post-semester survey. The survey responses revealed that this teaching practice increased understanding of the technical terms of 87% of the respondents and increased conceptual understanding of 83% of the respondents.

The Improvement Of The Regional Regulatory Governance System For Radiation Risk Management: Spatial Analysis On Radiation Hazards In South Korea, Sangwon Lee, Jaewon Lim, Chan Goo Yi

Public Policy and Leadership Faculty Research

Since the 2011 Fukushima nuclear power plant accident, nuclear regulators have strength-ened safety standards or decided to decommission the nuclear power plant. The vast majority of radiation is from nuclear power plants, so safety measures are also concentrated in nuclear power plants. Radioactive materials located much closer to the people are scattered around the nation. However, it is difficult for citizens to predict the radiation risk around them because regulatory agencies do not provide adequate information on radiation. The main goal of this study is to analyze the spatial distribution patterns of radioactive materials that serve as indicators for potential …

An Approach For Material Model Identification Of A Composite Coating Using Micro-Indentation And Multi-Scale Simulations, Pouya Shojaei, Riccardo Scazzosi, Mohamed Trabia, Brendan O’Toole, Marco Giglio, Xing Zhang, Yiliang Liao, Andrea Manes

Mechanical Engineering Faculty Research

While deposited thin film coatings can help enhance surface characteristics such as hardness and friction, their effective incorporation in product design is restricted by the limited understand-ing of their mechanical behavior. To address this, an approach combining micro-indentation and meso/micro-scale simulations was proposed. In this approach, micro-indentation testing was conducted on both the coating and the substrate. A meso-scale uniaxial compression finite element model was developed to obtain a material model of the coating. This material model was incorporated within an axisymmetric micro-scale model of the coating to simulate the indentation. The proposed approach was applied to a Ti/SiC metal …

Transdisciplinarity In Experience Design: A Global Survey Of Higher Ed Programs In Exd/Xd, Yvonne Houy

Creative Collaborations

In our age of ubiquitous devices and digital media it is the perceived value of the end-to-end experience that brings people to a place. Designing inspiring and emotionally engaging end-to-end experiences requires experts in a wide range of disciplines committed to an interdisciplinary collaboration that can arrive at transdisciplinary design - the sum becomes greater than its parts.

Civil engineering, hospitality, business, psychology, digital User Experience (UX) design, and experience data analysis need to be seamless integrated with the fine and performing arts and design fields:

• Architecture, interior, landscape and sound design actively engage the senses.

• Graphic and fine arts …

  ---

  Go to article

Review Of Mathematical Modelling Techniques With Applicationsin Biosciences, Ahmed Hasan Alridha, Ahmed Sabah Al-Jilawi, Fouad H. Abd Alsharify

Iraqi Journal for Computer Science and Mathematics

Modelling can provide intellectual frameworks that are necessary to translate data into knowledge.Mathematical modelling has played an important role in many applications, such as ecology, genetics, engineering,psychology, sociology, physics and computer science, in recent years. This study focused on reviewing mathematicalmodelling and its applications to biological systems by tracing many metabolic activities of cellular interactions onthe one hand and between the spread of epidemics and population growth on the other hand. Various mathematicalequations have played fundamental roles in the formation of these systems for model development proceduresby describing them mathematically and establishing relationships that characterise the dynamics of a biologicalphenomenon. …

A Machine Learning Approach To Intended Motion Prediction For Upper Extremity Exoskeletons, Justin Berdell

Graduate Research Theses & Dissertations

A fully solid-state, software-defined, one-handed, handle-type control device built around a machine-learning (ML) model that provides intuitive and simultaneous control in position and orientation each in a full three degrees-of-freedom (DOF) is proposed in this paper. The device, referred to as the “Smart Handle”, and it is compact, lightweight, and only reliant on low-cost and readily available sensors and materials for construction. Mobility chairs for persons with motor difficulties could make use of a control device that can learn to recognize arbitrary inputs as control commands. Upper-extremity exoskeletons used in occupational settings and rehabilitation require a natural control device like …

True-Ed Select: A Machine Learning Based University Selection Framework, Jerry C. Cearley

University of the Pacific Theses and Dissertations

University/College selection is a daunting task for young adults and their parents alike. This research presents True-Ed Select, a machine learning framework that simplifies the college selection process. The framework uses a four-layered approach including the user survey, machine learning, consolidation, and recommendation. The first layer collects both the objective and subjective attributes from users that best characterize their ideal college experience. The second layer employs machine learning techniques to analyze the objective and subjective attributes. The third layer combines the results from the machine learning techniques. The fourth layer inputs the consolidated result and presents a user-friendly list of …

Predictions Of Produced Water Quality And Recycled Water Optimization For Spatially-Distributed Wells In Point Pleasant Formation, Armel Quentin Mbakop

Graduate Theses, Dissertations, and Problem Reports (ETD)

The treatment of produced water as a fracturing fluid is becoming an increasingly important aspect of water management surrounding the booming of the unconventional oil and gas industry. Two main problems facing the oil and gas industry are the availability of water for well drilling and completion and disposal of the produced water. Unconventional well drilling and completion in the Utica shale requires large amounts of water. The wastewater that results after production—containing high levels of organic and inorganic matter— is usually disposed of through deep well injection. A new approach reuses this produced water as part of subsequent fracturing …

An Efficient Ar Model-Based Method For The Detection Of Forced Oscillations In Power Networks: Implementation And Analysis, Maria Waleska Suarez

Graduate Theses, Dissertations, and Problem Reports (ETD)

An active research topic is the detection of various oscillations that may lead to instability and potential disruption in the operation of a power network. Forced Oscillations (FOs) play a unique role in power system stability among various oscillations. They are perturbances that change the system’s state and are caused for many reasons, including but not limited to persistent load changes and oscillatory load or generation, fault, triplane, and other mechanical anomalies. These factors can hugely affect the power grid by either increasing or decreasing the amplitude, causing corrupt modes leading to blackouts, affecting the equipment involved, delivering poor power …

Influence Of Saturation Nonequilibrium And Variable Operation Conditions On The Electromechanical Performance Of Ionic Polymer Metal Composite Actuator Architectures, Allison Maria Arnold

Graduate Theses, Dissertations, and Problem Reports (ETD)

Electroactive polymers (EAPs) continue to gain attention for their potential to offer unique and versatile solutions in the soft robotic and flexible electronic industries. Ionic Polymer-Metal Composites (IPMCs) are a class of ionic-type EAPs which can be configured as capacitor actuators with very low voltage requirements (≤ 5 V AC or DC). Their compact, portable, and lightweight properties, coupled with a biomimetic bending actuation response make them ideal for human-machine integrated technologies such as medical implants, active skins, and artificial muscles. The Nafion-based IPMC can be described as a layered composite capacitor containing an ionic polymer core, sandwiched between chemically …

Synthesizing Realistic Substitute Data For A Law Enforcement Database Using A Python Library, Anthony Carrola

Graduate Theses, Dissertations, and Problem Reports (ETD)

In many databases, there is private or sensitive data that should not be accessible to any but a few individuals, such as HIPAA (Health Insurance Portability and Accountability Act) protected or LE (law enforcement) data. However, there is often a need to work with the data or change it for proper and thorough testing, especially for the developers . In some cases, the developers may be authorized to access and view the data, but it is rarely allowable for that data to be changed. Further, it is unlikely, especially on a large project, that all of the developers will have …

Geotextile Design And Performance For Dewatering Of Rare Earth Element Sludge Produced From Acid Mine Drainage, Cory J. Nasiadka

Graduate Theses, Dissertations, and Problem Reports (ETD)

Acid Mine Drainage (AMD) is an environmental legacy of mining operations that forms when sulfide minerals within the earth are exposed to water and oxygen and has significant harmful effects on the environment when left untreated. Researchers at West Virginia University found large concentrations of REE/CMs (Rare Earth Elements and Critical Minerals) in AMD treatment sludge. REE/CM consist of a group of 17 elements that are crucial to the production of advanced technologies. Due to an extremely low domestic supply of REE/CM in the United States, domestic sources and production of REE/CM are being investigated. This research investigates geotextile design …

Similitude, Scaling, And Prediction Of Stream Dissolved Oxygen Across The Contiguous U.S., Aron Gebreslase

Graduate Theses, Dissertations, and Problem Reports (ETD)

Dissolved oxygen (DO) is a general indicator of stream water quality and ecosystem health. However, the concentration of in-stream DO is controlled by various climatic, land use/cover, hydrologic, biochemical, and ecological drivers. Observational data for stream DO are often unavailable at the desired temporal and spatial scales. Accurate and reliable prediction of stream DO concentration based on a small set of environmental drivers is important to guide the water managers and policymakers to achieve and maintain healthy streams. This dissertation focused on identifying the dominant controls of stream DO and understanding the mechanisms and environmental regimes by employing machine learning, …

Network Slicing In 5g: Admission, Scheduling, And Security, Raneem Jassim Alghawi

Graduate Theses, Dissertations, and Problem Reports (ETD)

In the past few decades, there was an increase in the number of devices that have wireless capabilities such as phones, televisions, and home appliances. With the high demand for wireless networking, the fifth generation (5G) of mobile networks was designed to support the different services of new applications. In addition, one of the technical issues that 5G would evolve is the increase in traffic and the need to satisfy the user’s experience. With the evolution of wireless networking and 5G, Network Slicing has been introduced to accommodate the diverse requirements of the applications. Thus, network slicing is the concept …

Finite Element Method Calculation Of A Prestressed Self Consolidating Concrete Beam, Vladyslav Machulsky

Graduate Theses, Dissertations, and Problem Reports (ETD)

In this study, a prestressed concrete box beam produced for the Stalnaker Run Bridge (SRB) replacement project using self-consolidating concrete (SCC) was simulated using finite element method (FEM) numerical technique. ANSYS, a commercial FEM software, was used to build the prestressed SCC box beam model. The FEM model was developed to understand the behavior of concrete and steel under prestressing loads, long-term effects, and superimposed loads. The SOLID65 and REINF264 element types were chosen to simulate the behavior of concrete and steel materials. Experimentally measured mechanical properties of concrete from the SRB project were used in the analysis allowing for …

Stormwater Sensitivities To The Climatic And Land Cover Drivers In A Heavily Urbanized Coastal Basin Along The Northern Gulf Of Mexico, Usa., Md Faisal Razy

Graduate Theses, Dissertations, and Problem Reports (ETD)

Stormwater runoff response in a complex coastal-urban basin varies with the changes in climatic and land cover drivers. This thesis aims to assess the runoff responses to variation in climatic and land cover variables and perform a sensitivity analysis in complex coastal-urban basins. The Buffalo San Jacinto Basin (BUSJ) of southeast Texas, USA was considered a pilot study area for this research. BUSJ is a heavily urbanized coastal basin, draining an area of 3132 km² through the City of Houston, Texas into the northern Gulf of Mexico, USA. A process-based hydrological model was developed with fine spatio-temporal resolutions for …

Minimizing Cr-Evaporation From Balance Of Plant Components By Utilizing Cost-Effective Alumina-Forming Austenitic Steels, Lingfeng Zhou

Graduate Theses, Dissertations, and Problem Reports (ETD)

A solid oxide fuel cell (SOFC) is a clean and efficient energy conversion device. The development of intermediate-temperature SOFCs has made it preferable to use metallic interconnects (MICs) to greatly reduce the cost and significantly increase the efficiency compared to ceramic interconnect materials. However, gaseous chromium species will evaporate from the chromium-containing layer formed on the surface of commonly used MICs and balance of plant (BoP) components. Volatile chromium species have been shown to form solid deposits which poison the cathodes of SOFCs, causing drastic cell performance degradation and thereby limiting commercialization. In order to alleviate the Cr poisoning and …

Direct Ink Writing Printability – Ashby-Like Plots For Guided Design, Domenic Cipollone

Graduate Theses, Dissertations, and Problem Reports (ETD)

Direct Ink Writing (DIW), an extrusion-based 3D printing technique, offers a broad application space. As such, the technique continues to find use in biomedical, flexible electronic, ceramic, and energy device applications, among others. With this broad application space comes an expanding material library of inks with diverse rheological and microstructural properties. This begs the question: what constitutes a printable ink? How does one define printability? And how does one design for printability?

Researchers currently have a broad understanding of what constitutes a printable ink. However, time and time again, inks with unique rheological properties and formulations are printed. Currently, ink …

Mechanical Response Of Vartm Infused Frp Composites, Andrew Kenney

Graduate Theses, Dissertations, and Problem Reports (ETD)

Mechanical Response of VARTM based FRP composites

Andrew Kenney

The United States Department of Transportation (USDOT) recently created two new design specification for rail tank cars. These new types of classification, DOT-117 and DOT-117R, are designed with additional safety precautions to prevent hazardous chemicals from leaking out in case of a derailment. Features such as a thicker outer steel wall, head shield, and top and bottom valve protections provide additional protection compared to the current DOT-113 tank cars at the cost of additional weight. The WVU-CFC proposes a multifunctional, composite jacket that could be used in place of current tank …

Development Of A Machine Learning Model To Characterize The Performance Of A Selective Catalytic Reduction On Filter After-Treatment System For A Heavy-Duty Diesel Engine, Samuel A. Okeleye

Graduate Theses, Dissertations, and Problem Reports (ETD)

Particulate matter (PM) and Oxides of Nitrogen (NOx) are the major pollutants in diesel engines, an attempt to control one leads to an increase in the other, a phenomenon known as PM-NOx trade-off in diesel engine emission control. Currently, these two pollutants are controlled by the Diesel Particulate Filter (DPF) and the Selective Catalytic Reduction (SCR) after-treatment system respectively, in addition to the Diesel Oxidation Catalyst (DOC) which helps to provide 1:1 split of NO/NO₂ and helps with raising exhaust gas temperatures. Today, heavy-duty diesel engines feature a DPF, a primary SCR and a secondary SCR. Despite this complex …

Morphologic Clustering Of Earcanals Using Deep Learning Algorithm To Design Artificial Ears Dedicated To Earplugs Attenuation Measurement, Bastien Poissenot-Arrigoni, Chun Hong Law, Djamal Berbiche, Franck Sgard, Olivier Doutres

Études primaires

Designing earplugs adapted for the widest number of earcanals requires acoustical test fixtures (ATFs) geometrically representative of the population. Most existing ATFs are equipped with unique sized straight cylindrical earcanals, considered representative of average human morphology, and are therefore unable to assess how earplugs can fit different earcanal morphologies. In this study, a methodology to cluster earcanals as a function of their morphologies with the objective of designing artificial ears dedicated to sound attenuation measurement is developed and applied to a sample of Canadian workers’ earcanals. The earcanal morphologic indicators that correlate with the attenuations of six models of commercial …

Risk-Based Inspection Applied To Two-Post Above-Ground Automotive Lifts, Damien Burlet-Vienney, François Gauthier, Bertrand Galy

Études primaires

The safe use of two-post above-ground automotive lifts (2PAG lifts) has received particular attention in the province of Québec (Canada) following the death of a young mechanic. The inspection and preventive maintenance of this equipment is a problem highlighted in accident investigation reports and by representatives of the sector. Therefore, the work presented in this article aimed at proposing a complete and detailed inspection grid for 2PAG lifts by establishing an exhaustive list of verification criteria, baseline states and the inspection frequency for each criterion according to their criticality. The grid was built from standards, existing grids, manufacturers’ manuals, interviews …

Developing An Open Database To Support Forensic Investigation Of Disasters In South East Asia: Forinsea V1.0, Andres Payo, Raushan Arnhardt, Angelo Carlo R. Galindo, Pham Van Dong, Ma. Aileen Leah G. Guzman, Yasmin O. Hatta, Andrew Bevan, Jose Claro N. Monje

Electronics, Computer, and Communications Engineering Faculty Publications

This article describes the development of a bespoke database, FORINSEA1.0, created to address the need for a systematic curation of information needed for the descriptive phase of the FORIN approach and its application to two study areas in the South East Asia region. FORINSEA1.0 allows researchers, for the first time, to explore and make use of subnational, geocoded data on major disasters triggered by natural hazards (flooding, earthquake, landslide and meteorological hazards) since 1945 until 2020 in the hydrological catchment of the Red River in Vietnam and the Marikina Basin in the Philippines. FORINSEA1.0 also contains relevant subnational information on …

Nbp 2.0: Updated Next Bar Predictor, An Improved Algorithmic Music Generator, Belinda M. Dungan, Proceso L. Fernandez Jr

Electronics, Computer, and Communications Engineering Faculty Publications

Deep neural network advancements have enabled machines to produce melodies emulating human-composed music. However, the implementation of such machines is costly in terms of resources. In this paper, we present NBP 2.0, a refinement of the previous model next bar predictor (NBP) with two notable improvements: first, transforming each training instance to anchor all the notes to its musical scale, and second, changing the model architecture itself. NBP 2.0 maintained its straightforward and lightweight implementation, which is an advantage over the baseline models. Improvements were assessed using quantitative and qualitative metrics and, based on the results, the improvements from these …

Acute Magnetic Resonance Imaging Predictors Of Chronic Motor Function And Tissue Sparing In Rat Cervical Spinal Cord Injury, Seung-Yi Lee, Brian D. Schmit, Shekar N. Kurpad, Matthew D. Budde

Biomedical Engineering Faculty Research and Publications

Predicting functional outcomes from spinal cord injury (SCI) at the acute setting is important for patient management. This work investigated the relationship of early magnetic resonance imaging (MRI) biomarkers in a rat model of cervical contusion SCI with long-term functional outcome and tissue sparing. Forty rats with contusion injury at C5 at either the spinal cord midline (bilateral) or over the lateral cord (unilateral) were examined using in vivo multi-modal quantitative MRI at 1 day post-injury. The extent of T₂-weighted hyperintensity reflecting edema was greater in the bilateral model compared with the unilateral injury. Diffusion tensor imaging (DTI) …

Effect Of Freestream Noise On Hypersonic Crossflow-Induced Boundary-Layer Transition, Andrew Bustard, Thomas J. Juliano, Harrison B. Yates, Mark Noftz, Joseph Jewell

Publications

Between the windward and leeward rays, boundary-layer transition on cones at angle of attack in hypersonic flow is dominated by the crossflow instability [1, 2], wherein stationary and/or traveling crossflow vortices develop and can breakdown into turbulence [3]. Stationary crossflow modes are caused by surface roughness or any other steady forcing and produce disturbances that are fixed in place on the surface [3–6]. Stationary vortices create a generalized inflection point in the velocity profile that is inviscidly unstable [7]. This distorted mean flow develops secondary instabilities, whose growth and breakdown is one path to turbulence [8–10]. Traveling crossflow modes are …

Cradle-To-Grave Life Cycle Assessment Of Production And Consumption Of Pulses In The United States, Prathamesh A. Bandekar, Ben Putman, Greg Thoma, Marty Matlock

Biological and Agricultural Engineering Faculty Publications and Presentations

Environmental impact associated with production and consumption of pulses in the United States was evaluated using life cycle assessment (LCA). The system boundary was set to cradle-to-grave with a functional unit of 60 g (dry basis) of pulses consumed in a US household. Varieties of pulses modeled in the study included field pea (Pisum sativum), lentil (Lens culinaris), chickpea (Cicer arietinum), and dry bean. Three methods of cooking pulses at the consumer stage tested in the study were cooking in open vessel on electric cooking range (OVC), cooking in stovetop pressure cooker on electric cooking range (SPC), and cooking in …

Intelligent Voice Guidance In Vr: Understanding The Value Of Nlp In Virtual Environments, Zhiyu Xiao

Dartmouth College Master’s Theses

Virtual assistants such as Google Assistant, Alexa and Siri emerged because of the growth of NLP(natural language processing) technology. At the same time, virtual reality has developed rapidly in recent years and has become a crucial tool in engineering product development procedures. However, people feel overwhelmed in some complicated VR environments. Thus, this thesis tries to incorporate NLP technology into the VR environment and explores the value of intelligent voice guidance in VR environments. In this thesis, a car repair training system with intelligent voice guidance is designed: users can utilize voice to perform various tasks in this system, such …

Integrated Structural Health Monitoring Techniques Using Drone Sensors, Abdelaziz Ibrahem Mohammed Abdellatef

All ETDs from UAB

Bridges, as long-life large structures, are considered a challenge in both their construction and maintenance. Since they are subjected to frequent cyclic loads normally and accidents occasionally, they are prone to possible damages during their lifetime. There-fore, Structural Health Monitoring (SHM) is a must to avoid collapse or undesired closing. Various methods are used for that purpose that differ in their cost, efficiency, and ac-curacy. To obtain a better understating of the acceleration records of the bridge, the response of the vibrating beam subjected to stationary or moving mass is first studied by solving the equations of motion of both …