Engineering Commons^™

Meteorite Impact Craters As Hotspots For Mineral Resources And Energy Fuels: A Global Review, S. James, Saranya R. Chandran, M. Santosh, A. P. Pradeepkumar, M. N. Praveen, K. S. Sajinkumar

Michigan Tech Publications, Part 1

The ever-increasing recovery rate of natural resources from terrestrial impact craters over the last few decades across the globe offers new avenues for further exploration of mineral and hydrocarbon resources in such settings. As of today, 60 of the 208 terrestrial craters have been identified to host diverse resources such as hydrocarbons, metals and construction materials. The potential of craters as plausible resource contributors to the energy sector is therefore, worthy of consideration, as 42 (70%) of the 60 craters host energy resources such as oil, gas, coal, uranium, mercury, critical and major minerals as well as hydropower resources. Among …

Genes Involved In Cell Division In Acinetobacter Baumannii Are Coregulated By Umudab And Ddrr, Belinda Candra, Xiaohong Li, Eric Rouchka, Deborah Cook, Janelle Hare

2022 Celebration of Student Scholarship - Poster Presentations

In the presence of DNA damage, the multi-drug resistant bacteria Acinetobacter baumannii employs the proteins UmuDAb and DdrR to repress the expression of error-prone polymerases.

Temporary Housing Alternatives: Economic Analysis, Matt Gillispie, Swapna Kandula, Girija Patil, Juan Vasconez, Jennifer Lynn Zeitouni

Engineering and Technology Management Student Projects

In this report, we are aiming to find the best construction alternative to provide housing to the homeless community of Multnomah County in Oregon. The goal is to identify the most beneficial construction process through an economic analysis. In conjunction with existing projects such as “Safe Rest Villages” that are working on offering services and solutions, the plan is to reduce the county’s houseless population by 50% over a time period of 10 years. The analysis includes gathering data about the community, but also calculating the costs and benefits of three alternatives - 3D Printed houses, tiny homes, and prefabricated …

Jet Engine Emissions And Vapor Contrail Reduction Through Increased Combustion Efficiency With The Aim To Mitigate Greenhouse Gases Emissions, Austin J. Brant

Honors College Theses

As society continues to globalize and advance in complexity, the increased demand for business aviation has caused the global travel rate of airlines to increase with each year. With this continual increase in aviation travel, the Federal Aviation Administration (FAA) predicts that the fuel consumption rate is to increase by 1.6 percent as of the year 2025. While this increase in fuel consumption is a positive trait of a thriving aviation community, concerns also arise regarding increased greenhouse gas emissions and enlarged contributions to the greenhouse effect. The most prevalent greenhouse gases associated with jet engine emissions are water vapor, …

Nematic Liquid Crystal Carbon Nanotube Composite Materials For Designing Rf Switching Devices, Jeffrey Josse

Master's Theses (2009 -)

Radio frequency microelectromechanical systems (RF MEMS) devices are microdevices used to switch or modify signals from the RF to millimeter wave (mmWave) frequency range. Liquid crystals (LCs) are widely used as electro-optic modulators for display devices. An electric field-induced electrical conductivity modulation of pure LC media is quite low which makes it difficult to use for RF MEMS switching applications. Currently, RF MEMS devices are characterized as an excellent option between solid-state and electromechanical RF switches to provide high isolation, low insertion loss, low power usage, excellent return loss, and large frequency band. However, commercial usage is low due to …

Microgrid For Scu With Vehicle-To-Grid, Kurt Williams, Cameron Refaee

Electrical and Computer Engineering Senior Theses

Santa Clara University is a large loads in Santa Clara needed two finders and a maximum of over 8MW peak demand; however, this consumption will only increase as the student body and electric vehicles on campus continue to grow. To meet this rising demand in both a sustainable and environmentally friendly manner, we proposed and simulated a complete energy management system with cost analysis of energy savings of a microgrid capable of reducing the power supplied to Santa Clara University’s campus from the grid by 40% using renewable energy, vehicle-to-grid (V2G) functionality, and real SCU energy data. The project further …

Novel Cma Scheme To Design Self-Decoupled Mimo Dipole Pair For Base-Station Applications, Min Li, Bing Xiao, Changfei Zhou, Di Wu, Kwan Lawrence Yeung, Lijun Jiang, Ross Murch

Electrical and Computer Engineering Faculty Research & Creative Works

This article presents a novel method to design multiple-input-multiple-output (MIMO) antennas based on characteristic mode analysis (CMA), which is different from using individual excitation of each characteristic mode for high isolation. The CMA is performed to design a pair of symmetric slots on two connected dipole antennas (a MIMO dipole pair), so that two desired characteristic modes can be generated at the same frequency, one of which is in common mode and the other in differential mode. Hence, when one antenna element is excited, the two characteristic modes combine and cancel each other at the other antenna element, leading to …

2-D Tilt Sensor Based On Coaxial Cable Fabry-Perot Resonators With Submicroradian Resolution, Chen Zhu, Yan Tang, Yiyang Zhuang, Jing Guo, Rex E. Gerald, Jie Huang

Electrical and Computer Engineering Faculty Research & Creative Works

For the Past 50 Years, Open-Ended Coaxial Lines Were Commonly Employed for the Determination of Electromagnetic Properties of Various Materials. in This Article, the Application of an Open-Ended Hollow Coaxial Cable Resonator (OE-HCCR) as a 1-D Inclinometer for Tilt Measurements with 110 Nanoradian (Nrad) Resolution is Proposed and Demonstrated. the Coaxial Cable Resonant Structure is Formed between a Metal Post Welded within the Coaxial Cable at the RF Input End and the Open End of the Coaxial Cable. a Metal Mass Block, Suspended in Proximity to the Open End in Parallel is Used to Construct a Pendulum Structure, Serving as …

Cost Analysis For Renewable Energy At Residential Houses In Ca, Karthik Manjunath, Sara Ferdousi, Ahmed Mahdi, Navdeep Singh, Yousra Abusharekh

Engineering and Technology Management Student Projects

Solar energy has been demonstrated to be the most productive and compelling among sustainable power hotspots for home and business use. California has made a concerted effort to boost the integration of renewables into the grid. In 2020, a "solar mandate" went into effect, and in 2022, the California Energy Commission released the draft language for the 2022 building standards. The use of photovoltaic (PV) systems supports the achievement of Sustainable Development Goals (SDGs) – particularly SDG 13 in direct impact – through preserving the environment, reducing the levels of greenhouse gasses (GHGs), and accordingly reducing global warming. Therefore, the …

Bioai For Anti-Infective Drug Discovery, Maria Esquivel, Johann Fernando, Anna Fisher, Cameron Leong, Adam Weaver

Interdisciplinary Design Senior Theses

Modern antibacterial drugs are quickly becoming insufficient for medical, agricultural and veterinary use, and the drug design techniques used to supplement the supply are not able to adequately and quickly produce enough effective candidates. We took a multi-pronged approach to remedying this problem, including shifting the target mechanism from antibiotic drugs in favor of anti-infective drugs, developing an AI which aimed to predict the interactions of small molecule fragments with the target protein, and refining wet lab testing protocols in order to make the drug design process holistically more efficient and effective. We have shown that there is potential in …

Vertical Take-Off And Landing Control Via Dual-Quaternions And Sliding Mode, Joshua Sonderegger

Doctoral Dissertations and Master's Theses

The landing and reusability of space vehicles is one of the driving forces into renewed interest in space utilization. For missions to planetary surfaces, this soft landing has been most commonly accomplished with parachutes. However, in spite of their simplicity, they are susceptible to parachute drift. This parachute drift makes it very difficult to predict where the vehicle will land, especially in a dense and windy atmosphere such as Earth. Instead, recent focus has been put into developing a powered landing through gimbaled thrust. This gimbaled thrust output is dependent on robust path planning and controls algorithms. Being able to …

Online Pilot Model Parameter Estimation For Loss-Of-Control Prevention In Aircraft Systems, Frederick Schill

Doctoral Dissertations and Master's Theses

A pilot is a highly nonlinear and incredibly complex controller whose responses are difficult to predict. Many accidents have occurred from pilot error before or after failures and almost always after entering areas of the flight envelope considered as Loss-of-Control regimes. If a pilot's inputs to the flight control system can be predicted, then the introduction of dangerous flight conditions can be readily avoided. Avoidance could take the form of a warning indicator or augmentation of the pilot's inputs. The primary difficulty lies in how to actually predict how the pilot will perform in the future.

Methods to solve this …

Water Based Soil Fluidization Using A Soft Eversion Robot, James E. Hand

Doctoral Dissertations and Master's Theses

Soft robotics, a form of robotics that incorporates nonrigid components, continues to grow in scope, system design, and application. A recent addition to this field is the Vine Robot platform, a bio-inspired robot designed by Stanford University in 2017. Its method of movement, known as eversion, closely resembles the way that a vine grows along a tree, giving it its name. The focus of this research was to take its proven abilities of underwater vine-like movement and soil fluidization, a process where granular materials are converted from a solid-like state to a fluid-like state, to create an underwater eversion robot …

Dynamic Analysis Of Cubesat Impact On Lunar Surface, Dalton C. Korczyk

Doctoral Dissertations and Master's Theses

EagleCam is a pico-satellite (CubeSat) with dimensions of 100 x 100 x 150 mm3 that is going to the moon as a payload of the Intuitive Machines Nova-C lunar lander. The CubeSat’s purpose is to record the lunar landing from a 3rd person view. Unlike other CubeSats, EagleCam is designed to impact the lunar surface and there is no history to build off of. Specifically, EagleCam will need to survive a 30 m drop onto the lunar surface with all internal components fully operational post impact. This thesis is focused on the analytical, numerical, and experimental methods for determining the …

Controller Design For A Swirl Injection Hybrid Launch Vehicle, Ryan Kinzie

Doctoral Dissertations and Master's Theses

This research is focused on the design of controllers for stabilizing a launch vehicle with an internally originating torque. The motivation for this research arises from the new development of rocket engines which swirl combustion gases to gain combustion stability benefits, and in the case of hybrid rocket engines, fuel regression benefits as well. The stability of the launch vehicle dynamics due to the internal torque has not been discussed before. To the author’s knowledge, this is the first research to address the stabilization problem of the launch vehicle with internal torque. Due to the new design/characteristics of these engines, …

Effects Of Emergency Vehicle Warning Lighting System Characteristics On Driver Perception And Behavior, Emily Hiebner

Doctoral Dissertations and Master's Theses

Secondary crashes, including struck-by incidents are a leading cause of line-of-duty deaths among emergency responders, such as firefighters, law enforcement officers, and emergency medical service providers. The introduction of light emitting diode (LED) sources and advanced lighting control systems, provides a wide range of options for emergency lighting configurations. This study investigated the impact of lighting color, intensity, modulation, and flash rate on driver behavior while traversing a traffic incident scene at night. The impact of retroreflective chevron markings in combination with lighting configurations, as well as the measurement of “moth-to-flame” effects of emergency lighting on drivers was also investigated. …

Experimental And Numerical Investigation Of Lauric Acid Melting At Suboptimal Inclines, Casey J. Troxler

Doctoral Dissertations and Master's Theses

Validation experiments are the baseline for completing numerical studies for engineering design. Applications of the enthalpy-porosity model have expanded in research with the growth of new technologies such as metal additive manufacturing or the renewed interest in thermal energy storage for supplementing renewable energy. A simplified experiment examining the melting behavior of lauric acid from an isothermal surface has become a common case for validating the performance of numerical models. Several studies of this rectangular experiment have been repeatedly used as model validation in a variety of problem conditions.

The first part of this study presents experimental data for the …

Evaluating The Effects Of Shored Construction On Steel Girder Composite Bridges, Parker Brooks

Doctoral Dissertations and Master's Theses

Steel composite girder bridges provide economic advantages and higher load-carrying capacity than non-composite alternatives. Over the years, a conventional sequence of un-shored construction for steel girder composite bridges has been developed. There is an alternative construction sequence, known as shored construction, that uses temporary supports (discretely or fully supported) for the superstructure during the installation of metal forms and the pouring of concrete. Shored construction also can be used in an Accelerated Bridge Construction (ABC) practice where construction occurs at a nearby site and fully-formed elements are transported to the final site using self-propelled modular transporters (SPMTs). In order to …

Time-Resolved Piv Measurements Of Ship Airwakes With Quartering Winds, Kaijus H. Palm

Doctoral Dissertations and Master's Theses

The unsteady, three-dimensional, turbulent airwake over the Simple Frigate Ship No. 2 (SFS2) with quartering wind flow directions was studied in a low-speed wind tunnel facility. Surface oil flow visualization and time-resolved stereoscopic and planar particle image velocimetry (PIV) measurements were made for three crosswise planes and a single centerline streamwise plane. Measurements included various configurations with the bow of the ship model at two different quartering wind conditions of 10 and 20 degrees, as well as cases with and without the effects of a simulated atmospheric boundary layer (ABL). A comparative analysis of the time-averaged flow structures between the …

Influence Of Wing Planform Shape On The Effectiveness Of A Fixed-Slot, Yuan Zhao

Doctoral Dissertations and Master's Theses

This thesis report explores the effect of the Clark-Y wing geometry on lift and drag to use as a reference during aircraft design stage. The different characteristics investigated are fixed slot span, taper ratio, washout, and sweep angle. Plain wings, half slotted wings, and fully slotted wings were built in CATIA with an aspect ratio of 6 and different taper ratio, washout, and sweep angles. Using the CATIA models to generate the 3-D grids in Pointwise. All the simulations were tested in Ansys-Fluent under sea-level conditions with a Reynold number of 609000. The relationships between the aerodynamic characteristics and the …

Marine Robot Sample Retrieving System, Valeriya Chulyukina, Noah Villar, Kekoa Blair, Mandeep Singh, Nathan Burke

Mechanical Engineering Senior Theses

The exploration of our underwater ecosystems is critical. The aquatic ecosystem has a significant effect on human life, yet our understanding of the oceanic environment is severely lacking. Santa Clara University’s Robotic Systems Lab contributes to subsea exploration through its investment in remotely operated vehicle (ROV) technology. This project was done with the guidance of not only professors in the Robotics Systems Lab, but also stakeholders from the US Geological Survey scientists and researchers from the Monterey Bay Aquarium Research Institute (MBARI). Our team goal was to further advance SCU’s efforts by creating a sediment sample collection system consisting of …

Marine Robot Sample Retrieving System, Valeriya Chulyukina, Noah Villar, Kekoa Blair, Mandeep Singh, Nathan Burke

Interdisciplinary Design Senior Theses

The exploration of our underwater ecosystems is critical. The aquatic ecosystem has a significant effect on human life, yet our understanding of the oceanic environment is severely lacking. Santa Clara University’s Robotic Systems Lab contributes to subsea exploration through its investment in remotely operated vehicle (ROV) technology. This project was done with the guidance of not only professors in the Robotics Systems Lab, but also stakeholders from the US Geological Survey scientists and researchers from the Monterey Bay Aquarium Research Institute (MBARI). Our team goal was to further advance SCU’s efforts by creating a sediment sample collection system consisting of …

Quadratic Neural Network Architecture As Evaluated Relative To Conventional Neural Network Architecture, Reid Taylor

Senior Theses

Current work in the field of deep learning and neural networks revolves around several variations of the same mathematical model for associative learning. These variations, while significant and exceptionally applicable in the real world, fail to push the limits of modern computational prowess. This research does just that: by leveraging high order tensors in place of 2nd order tensors, quadratic neural networks can be developed and can allow for substantially more complex machine learning models which allow for self-interactions of collected and analyzed data. This research shows the theorization and development of mathematical model necessary for such an idea to …

Simulation, Optimization, And Economic Assessment Of Pelamis Wave Energy Converter, Hana Ghaneei, Mohammadreza Mahmoudi

Faculty Articles, Papers, and Other Scholarship

Wave energy and power is accessible on almost any body of water. One of the most widely known floating structures to generate renewable energy from the seas and the ocean is wave energy converter Pelamis. In this study, an attempt was made to simulate the dynamic behaviour of Pelamis P2 in the software AQWA under the influence of a nonlinear second-order Stokes wave. Pelamis P2 was simulated in different marine conditions including different water depths, wave heights, periods, and angles to assess its optimal operation. With the results in mind, it can be argued that with an increase in water …

First Order Enhanced Coupling Strength (Ecs) Gratings For Laser-Electro Absorption Modulator (Eam) Transmitters, Freddie Castillo Ii

Electrical Engineering Theses and Dissertations

Conventional first-order DBR gratings in III-V waveguides often require hundreds of microns to achieve near 100% reflected power and provide narrow spectral reflectivity width for a single wavelength, limiting temperature performance of devices. Narrow reflectivity spectral width is desired for spectroscopy and wavelength division multiplexing applications where device temperature is regulated. However, Enhanced Coupling Strength (ECS) gratings provide in-plane reflectors with significantly higher reflected power per unit length, broad spectral reflectivities, and reduced losses at the waveguide-grating interface in III-V waveguides. These properties of ECS gratings allow integration of optical components such as high-speed modulators with short horizontal cavity lasers …

Discovering Ways To Increase Inclusivity For Dyslexic Students In Computing Education, Felicia Hellems, Sajal Bhatia

School of Computer Science & Engineering Faculty Publications

The years accompanying entrance into the university system are often characterized by a period of great transformation. These years can also be wrought with difficulties for many students, difficulties which are often compounded in students with disabilities (SWD). Reports from the U.S. Department of Education show that as recently as 2015--16, 19% of undergraduate students experienced some form of disability1. Additionally, statistics show that SWD tend to have lower post secondary completion rates than their counterparts [3]. A review of pertinent literature has shown that there still exist gaps within the field of computing education (CE) for teaching cybersecurity concepts …

Value-Oriented Business Process Management: Using A Process Reengineering Approach To Identify Productivity Improvement Requirements And Justify Strategic Capital Investment, Laura Vu

Operations Research and Engineering Management Theses and Dissertations

The goal of this praxis is to create a modeling approach that can be used to evaluate and quantify the current efficiency and throughput at a transloading facility. The model will also be used to show the expected metric improvements and financial return of potential operational changes and capital investment scenarios that could be implemented, giving the facility’s management justification to approve these upgrades.

The case study presented will show how to capture and document the current processes within the loading facility, model the relationships between resources and constraints, find appropriate probability distributions to represent the service data, define the …

An Overview Of The Potential For Blockchain Technology To Improve Cybersecurity, Stanley Mierzwa

Center for Cybersecurity

The purpose of this short research commentary is to provide a focused, semi-deep dive into the effort the industry places on cybersecurity defense and operations and the potential to integrate blockchain technology. As cybersecurity threats and incidents continue to rise, better procedures and strategies to protect our organizations’ data and systems are crucial to sustaining viable operations. Given that blockchain technology can potentially disrupt other industries (Moore, 2020), it is imperative to examine how it may improve our cybersecurity.

Cybersecurity Best Practices For The Manufacturing Industry, David Ortiz, Stanley Mierzwa

Center for Cybersecurity

The manufacturing and industrial sectors have evolved with the introduction of technologies over the past many decades. Progress in improving processes, techniques, output, quality, and efficiencies have been gained with new emerging technologies, resulting in positive and fortuitous changes for organizations. With the rapid movement towards a modern-day manufacturing environment, new and connected technologies that employ greater cyber-connectedness continue to grow, but at the same time, introduce cybersecurity risks.

Thermal-Hydraulic System Analysis Of A Proposed 1 Mwth Nuclear Gas Cooled Microreactor, Aaron S. Fernandez

Theses and Dissertations

Nuclear power plants have historically been large, expensive, and prolonged construction projects. A new generation of reactors categorized as microreactors is currently being designed to address energy needs in remote locations. The University of South Carolina has proposed the MIcro Nuclear In ONe megawatt (MINION-1) design to achieve ten years of operation. The primary loop transfers 1 MW of energy from the reactor core using helium, while the secondary uses air in an open Brayton cycle to produce power and heat. This work focuses on modeling the MINION-1 design using the System Analysis Module (SAM) developed by Argonne National Labs …