Engineering Commons^™

Failure Analysis Of Deep Coal Seam Floor Considering Strain Softening Of Surrounding Rock And Formation Contact In Goaf, Yin Shangxian, Meng Haopeng, Qian Shuangbin

Coal Geology & Exploration

In order to study the failure mode of the floor in deep coal seam mining, we proposed a FLAC^3D finite difference numerical method considering the strain softening of surrounding rock and the contact of goafs .Through the qualitative analysis of Rankine’s earth pressure theory, the failure of the deep coal seam floor is studied based on the measured water conducting fracture zone of the floor in working face 2023 of Linxi Mine. The results show that the mechanical state of surrounding rock after plastic failure can be described more accurately by using the strain-softening constitutive relationship instead of the …

Temperature Field Analysis Of New Pipe Curtain Freezing Method In River Embankment Anti Seepage Reinforcement, Zhou Yuxuan, Hu Jun, Xiong Hui, Ren Junhao, Zhan Jianjian, Wang Zhixin

Coal Geology & Exploration

In order to explore whether the new pipe curtain freezing method can effectively strengthen the river embankment, this paper uses the finite element software to study the application of the new pipe curtain freezing method in anti-seepage and embankment reinforcement based on the temperature field, and sets up four analysis paths to deeply analyze the basic situation of the frozen soil curtain and the freezing effect characteristics of each path. The results show that the frozen soil curtain spreads around after it is formed at the freezing pipe. From the 8th day, the development of the frozen soil curtain on …

Lifecycle Reactive Transport Modeling For Assessing Integrity In Offshore Energy Systems, Temitope Ayokunle Ajayi

LSU Doctoral Dissertations

Subsurface leaks and spills are a matter of significant concern to the oil and gas industry because of their impact on health, safety and environment. It is thus important to study and assess the integrity of our energy systems and the physico-chemical processes that affect them.

To avoid leakage of fluids from wellbores, barrier materials are used for sealing formation fluids and creating a single flow path through the well. These barrier materials are constantly subjected to subsurface fluid fluxes and temperature, pressure and chemical conditions over the extended periods the wells remain underground. This makes it imperative to assess …

Cross-Atlantic Experiments On Eu-Us Test-Beds, Sachin Sharma, Avishek Nag, Byrav Ramamurthy

Articles

Today, there are a number of real testbeds worldwide among which Fed4Fire testbeds are prominent in the EU, while POWDER and COSMOS are prominent in the US. This paper aims to validate inter-testbed experiments between the EU and the US by connecting a number of Fed4Fire and US testbeds as part of an NGIAtlantic project. The goal is to compare the hop count, the topology formed, the maximum bandwidth permitted, and the loss and jitter that occurred between different testbeds. Additionally, Software Defined Networking (SDN) experiments between EU and US testbeds are conducted, and an edge-computing use case is developed …

Cloudbots: Autonomous Atmospheric Explorers, Akash Binoj

Honors Scholar Theses

The CloudBot is an autonomous weather balloon that operates on the principle of variable buoyancy to ascend and descend in the atmosphere. This project aims to develop a device that will collect atmospheric measurements and communicate them mid-flight. The apparatus consists of a helium-filled balloon, the robotic payload, and an air cell. The fixed-volume helium balloon at the top provides an upwards buoyancy force, while the air cell at the bottom can hold a variable amount of pressure to adjust the weight of the CloudBot. By doing so, it is able to travel in storm conditions and collect valuable atmospheric …

Table Of Contents, The Editors

Coal Geology & Exploration

No abstract provided.

Eefficient Fracturing Technology And Fine Drainage System Of Ultra-Deep Coalbed Methane In Southeast Chongqing：A Case Study Of Ny1 Well, Fang Dazhi, Cheng Zehu, Li Jiaxin

Coal Geology & Exploration

According to the results of China’s new round of coalbed methane (CBM) resource evaluation, the CBM development mainly focuses on medium and shallow coal seams, and the geological conditions of deep-ultra deep coal reservoirs are more complicated. Thus, the reservoir fracturing technology and drainage management technology are two major factors in the development of CBM wells for deep coal reservoirs. In the area of southeast Chongqing, the coal seam of Longtan Formation is as deep as nearly 2 000 m, and there is no experience in ultra-deep CBM well development in this area. The NYI well is taken as an …

Identification Of Burning Temperature Of Burnt Rocks In Northern Shaanxi Based On Thermoacoustic Emission Technology, Sun Qiang, Wang Shaofei, Ge Zhenlong, Wei Shaoni, Ding Xiaoying

Coal Geology & Exploration

The identification of the burning temperature of burnt rocks has important guiding significance for the formation and evolution of burnt rocks. Based on the thermal Kaiser effect, the threshold temperature of burnt rock in Zhangjiamao, Shenmu, Northern Shaanxi Province is predicted through the acoustic emission (AE) acumulated energy and the changes of parameters RA (rise time/amplitude) and AF (average frequency) during heat treatment. The results show that the thermoacoustic emission characteristics of burnt rocks can effectively identify the burning temperature of burnt rocks, and it is basically consistent with the petrographic analysis of the temperature experienced by the burnt rocks. …

Adcs Hardware, Space Dynamics Laboratory

Space Dynamics Laboratory Publications

Subsystem Overview

• ADCS
• Fundamental Modes

Sensors

• Magnetometer
• Gyroscope
• Sun Sensors
• Star Tracker
• GPS Receiver
• Design/Build of Sensors

Actuators

• Passive Magnetics
  
• Torque Coils/Rods
• Reaction Wheels
• Reaction Wheel Physics
• Control Moment Gyros
• Thrusters

Requirements

• Overview
• Components
• Requirement Drivers
• Requirement Flow
• Error Stackup

Dependencies

• Moving Parts
• Keep outs
• Vehicle Geometry
• Power/Data Impacts
• Magnetics

Analysis

• First Checks
• Simulation

Testing

• Polarity
• Reduced System
• Integrated System
• Conclusion

Project Metamorphosis: Designing A Dynamic Framework For Converting Musical Compositions Into Paintings, Rao Hamza Ali, Grace Fong, Erik Linstead

Engineering Faculty Articles and Research

The authors present an automated, rule-based system for converting piano compositions into paintings. Using a color-note association scale presented by Edward Maryon in 1919, which correlates 12-tone scale with 12 hues of the color circle, the authors present a simple approach for extracting colors associated with each note played in a piano composition. The authors also describe the color extraction and art generation process in detail, as well as the process for creating “moving art,” which imitates the progression of a musical piece in real time. They share and discuss artworks generated for four well-known piano compositions.

Aerosol Capture And Coronavirus Spike Protein Deactivation By Enzyme Functionalized Antiviral Membranes, Rollie Mills, Ronald J. Vogler, Matthew Bernard, Jacob Concolino, Louis B. Hersh, Yinan Wei, Jeffrey Todd Hastings, Thomas D. Dziubla, Kevin C. Baldridge, Dibakar Bhattacharyya

Chemical and Materials Engineering Faculty Publications

The airborne nature of coronavirus transmission makes it critical to develop new barrier technologies that can simultaneously reduce aerosol and viral spread. Here, we report nanostructured membranes with tunable thickness and porosity for filtering coronavirus-sized aerosols, combined with antiviral enzyme functionalization that can denature spike glycoproteins of the SARS-CoV-2 virus in low-hydration environments. Thin, asymmetric membranes with subtilisin enzyme and methacrylic functionalization show more than 98.90% filtration efficiency for 100-nm unfunctionalized and protein-functionalized polystyrene latex aerosol particles. Unfunctionalized membranes provided a protection factor of 540 ± 380 for coronavirus-sized particle, above the Occupational Safety and Health Administration’s standard of 10 …

Casm-Amfmnet: A Network Based On Coordinate Attention Shuffle Mechanism And Asymmetric Multi-Scale Fusion Module For Classification Of Grape Leaf Diseases, Jiayu Suo, Jialei Zhan, Guoxiong Zhou, Aibin Chen, Yaowen Hu, Weiqi Huang, Weiwei Cai, Yahui Hu, Liujun Li

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Grape disease is a significant contributory factor to the decline in grape yield, typically affecting the leaves first. Efficient identification of grape leaf diseases remains a critical unmet need. To mitigate background interference in grape leaf feature extraction and improve the ability to extract small disease spots, by combining the characteristic features of grape leaf diseases, we developed a novel method for disease recognition and classification in this study. First, Gaussian filters Sobel smooth de-noising Laplace operator (GSSL) was employed to reduce image noise and enhance the texture of grape leaves. A novel network designated coordinated attention shuffle mechanism-asymmetric multi-scale …

Chapter 27: Bloch Sphere And Single-Qubit Arbitrary Unitary Gate, Hiu Yung Wong

Faculty Research, Scholarly, and Creative Activity

No abstract provided.

Semantic Segmentation To Extract Coronary Arteries In Invasive Coronary Angiograms, Chen Zhao, Robert Bober, Haipeng Ang, Jinshan Tang, Minghao Dong, Chaoyang Zhang, Zhuo He, Weihua Zhou, Et. Al.

Michigan Tech Publications, Part 1

Accurate semantic segmentation of each coronary artery using invasive coronary angiography (ICA) is important for stenosis assessment and coronary artery disease (CAD) diagnosis. In this paper, we propose a multi-step semantic segmentation algorithm based on analyzing arterial segments extracted from ICAs. The proposed algorithm firstly extracts the entire arterial binary mask (binary vascular tree) using a deep learning-based method. Then we extract the centerline of the binary vascular tree and separate it into different arterial segments. Finally, by extracting the underlying arterial topology, position, and pixel features, we construct a powerful coronary artery segment classifier based on a support vector …

Chapter 28: Quantum Phase Estimation, Hiu Yung Wong

Faculty Research, Scholarly, and Creative Activity

No abstract provided.

Chapter 3: Basis, Basis Vectors, And Inner Product, Hiu Yung Wong

Faculty Research, Scholarly, and Creative Activity

No abstract provided.

Effect Of Automation Level On Cognitive Workload When Collaborating With A Robotic Assistant, Mitchell A. Champagne

LSU Master's Theses

Manufacturing robotics have been used for decades to perform repetitive tasks, or tasks that require increased levels of speed, strength, or precision to meet production and specification requirements. Determining the appropriate degree of automation for both the human and robot collaborative team members is critical to optimize production as well as user experience. If the degree of automation is too high, the human will be out of the loop which can result in the loss of situational awareness and be detrimental to intervention time and accuracy. If the degree of automation is too low, then the human may experience greater …

Sub-Nyquist Optical Pulse Sampling For Photonic Blind Source Separation, Taichu Shi, Yang Qi, Weipeng Zhang, Paul Prucnal, Jie Li, Ben Wu

Henry M. Rowan College of Engineering Departmental Research

We propose and experimentally demonstrate an optical pulse sampling method for photonic blind source separation. The photonic system processes and separates wideband signals based on the statistical information of the mixed signals, and thus the sampling frequency can be orders of magnitude lower than the bandwidth of the signals. The ultra-fast optical pulses collect samples of the signals at very low sampling rates, and each sample is short enough to maintain the statistical properties of the signals. The low sampling frequency reduces the workloads of the analog to digital conversion and digital signal processing systems. In the meantime, the short …

Temperature And Radiation Measurements In A Pressurized Oxy-Coal Reactor, Dustin Peter Badger

Theses and Dissertations

To understand the behavior and performance of a new 100 kW pilot scale pressurized oxy-coal reactor, radiation measurements of the flame have been made using a Fourier Transform Infrared (FTIR) spectrometer. From these radiation measurements, gas temperatures were obtained using integrated spectral infrared (ISIR) emission from the CO2 and water vapor of the combustion product gases. Radiative emission from the product gases in the reactor were collected through a quartz window 1.524 m downstream of the burner. An optical probe focused culminated emission from the combustion chamber into a silica fiber which transported the radiative signal to the spectrometer. The …

Multi-Material 3d-Printed Silicone Vocal Fold Models, Clayton Adam Young

Theses and Dissertations

Self-oscillating synthetic vocal fold (VF) models are often used to study human voice production. In this thesis, a method for fabricating multi-layer self-oscillating synthetic VF models using silicone 3D printing is presented. Multi-material 3D printing enables faster fabrication times with more complex geometries than traditional casting methods and builds a foundation for producing VF models with potentially more life-like geometries, materials, and vibratory characteristics. The printing method in this study used a custom dual extruder and slicing software to print UV-curable liquid silicone into a gel-like support matrix. The extruder was fabricated using high-torque stepper motors with high resolution leadscrews …

Comparison Of Aero Engine Component Lifing Methods, Ashley Whitney-Rawls, Paul Copp, Jace Carter, Tarun Goswami

Biomedical, Industrial & Human Factors Engineering Faculty Publications

Failure of critical engine components such as compressor, fan, and turbine disks during flight can cause the loss of the engine, aircraft, or even life. To reduce the risk of this failure during flight, different methodologies and tools have been developed to determine the safe operating life of these critical disk components. The two most widely used lifing methods, safe-life and damage tolerance, are inherently conservative, retiring all components when a predetermined operating limit is reached. Both methods retire components with theoretical useful life remaining. Additional lifing methods can be used to reduce this conservatism and extend the life of …

Blockchain Storage – Drive Configurations And Performance Analysis, Jesse Garner, Aditya A. Syal, Ronald C. Jones

Other Student Works

This project will analyze the results of trials implementing various storage methods on Geth nodes to synchronize and maintain a full-archive state of the Ethereum blockchain. The purpose of these trials is to gain deeper insight to the process of lowering cost and increasing efficiency of blockchain storage using available technologies, analyzing results of various storage drives under similar conditions. It provides performance analysis and describes performance of each trial in relation to the others.

Natural Layered Mercury Antimony Sulfosalt Livingstonite With Anisotropic Optical Properties, Ravi P.N. Tripathi, Jie Gao, Xiaodong Yang

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Naturally occurring layered mineral livingstonite is identified as a new type of van der Waals (vdW) heterostructure based 2D material, consisting of two commensurately modulated alternating layers of HgSb2S4 and Sb2S4. The heterostructures of livingstonite crystal are prepared as thin flakes via mechanical exfoliation method. The prepared livingstonite crystals are further investigated in the context of vibrational, linear, and nonlinear optical properties, including anisotropic Raman scattering, wavelength-dependent linear dichroism (LD) transition effect, birefringence, and anisotropic third-harmonic generation (THG). Owing to the monoclinic crystal structure, livingstonite crystals exhibit strong anisotropic vibrational and optical responses. In contrast to conventional vdW heterostructures, the …

Dual-Band Selective Circular Dichroism In Mid-Infrared Chiral Metasurfaces, Haotian Tang, Daniel Rosenmann, David A. Czaplewski, Xiaodong Yang, Jie Gao

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Most chiral metamaterials and meta surfaces are designed to operate in a single wavelength band and with a certain circular dichroism (CD) value. Here, mid-infrared chiral meta surface absorbers with selective CD in dual-wavelength bands are designed and demonstrated. The dual-band CD selectivity and tunability in the chiral meta surface absorbers are enabled by the unique design of a unit cell with two coupled rectangular bars. It is shown that the sign of CD in each wavelength band can be independently controlled and flipped by simply adjusting the geometric parameters, the width and the length, of the vertical rectangular bars. …

A Music-Therapy Robotic Platform For Children With Autism: A Pilot Study, Huanghao Feng, Mohammad H. Mahoor, Francesca Dino

Electrical and Computer Engineering: Faculty Scholarship

Children with Autism Spectrum Disorder (ASD) experience deficits in verbal and nonverbal communication skills including motor control, turn-taking, and emotion recognition. Innovative technology, such as socially assistive robots, has shown to be a viable method for Autism therapy. This paper presents a novel robot-based music-therapy platform for modeling and improving the social responses and behaviors of children with ASD. Our autonomous social interactive system consists of three modules. Module one provides an autonomous initiative positioning system for the robot, NAO, to properly localize and play the instrument (Xylophone) using the robot’s arms. Module two allows NAO to play customized songs …

Developing An Energy Service Interface Specification, Jaime T. Kolln

Dissertations and Theses

Developing an Energy Service Interface (ESI) specification requires engaging a community of stakeholders including grid operators, Information and Communication Technology implementors, integrators, and finally standards bodies who will define an interface that respects and boundaries of ownership and roles of responsibility in order to activate millions of Distributed Energy Resources for the provision of grid services. By applying Interoperability Maturity Model Criteria and ESI principles to common grid-DER service use cases, the Grid Modernization Lab Consortium team will engage subject matter experts to develop a specification, with an eventual goal of informing development of ESI compliant profiles or standards. The …

Impact Of The Ban On Illegal Mining Activities On Raw Water Quality: A Case-Study Of Konongo Water Treatment Plant, Ashanti Region Of Ghana, Sadique Anyame Bawa, Prince Antwi-Agyei, Martin Kyereh Domfeh

Journal of Sustainable Mining

The Government of Ghana prohibited Artisanal and Small-Scale Mining (ASM) operations from 2017 to 2018 as part of its strategy to address the socio-environmental issues caused by illegal mining activities, also referred to as “galamsey” operations. This study assessed the trend in the water quality of raw water abstracted at the Konongo Water Treatment Plant (WTP) for treatment before and after implementing the ban on “galamsey” operations. The main source of raw water for the Konongo WTP is the Anuru River. Secondary data on physicochemical water quality from 2006 to 2019 was sourced from the Konongo WTP and the Ashanti …

Improved Methodology For Monitoring The Impact Of Mining Activities On Socio-Economic Conditions Of Local Communities, Binay Prakash Pandey, Devi Prasad Mishra

Journal of Sustainable Mining

Mining activities can cause tangible socio-economic improvements in the surrounding regions. Such potential has not been fully realized, owing to the fact that the socio-economic impact assessment processes exercised in India merely predict the footprint of industrial activity on the surrounding population. Consequently, project proponents are mandated to implement a management plan in cases of foreseeable negative consequences. However, both, the assessment study, as well as the process of implementation of a management plan, are riddled with significant gaps and limitations. Primary data collected for this research makes it apparent that, in comparison to the revenue generated from the mining …

Final Report - Climbing Robots With Automated Deployments Of Sensors And Nde Devices For Steel Bridge Inspection, Hung La, Son Nguyen

Project AS-2

Automated solutions for infrastructure inspection are desirable. However, arduous engineering is delaying our progress. A complete system needs to deal with three main problems: (1) locomotive performance for high complexity of steel bridges including differential curvatures, transitions between beams and obstacles; (2) data collection capability, inclusive of visible and invisible damages, in-depth information such as vibration, coat, and material thickness, etc.; and (3) working condition made up of gust wind. To have such a complete system, this technical report presents novel developments in inspection-climbing robots. Four different robot versions are designed to look for the simplest and most effective configuration …

Evaluating And Incorporating Site Variability In Different Geotechnical Engineering Applications, Md Habibur Rahman

LSU Doctoral Dissertations

Site investigation and characterization of subsurface soil conditions are crucial for geotechnical engineering design and analysis. Geotechnical properties vary inherently from one point to another within the same site. This study focused on evaluating the site variability from cone penetration tests (CPT) and soil boring data, and its implementation into the Load and Resistance Factor Design (LRFD) formulation. The total Coefficient of Variation (COV_R,total) for each site was estimated from COV_R,spatial (Spatial Coefficient of Variation) and COV_R,method (Method Coefficient of Variation) which were then used to calibrate the resistance factors (ϕ_spatial, ϕ_total) …