Engineering Commons^™

Hydraulic Redistribution Under Saline Conditions, Josh Gottlieb

Civil and Environmental Engineering Undergraduate Honors Theses

Water scarcity and soil salinity are dual stressors for plants in arid, salt-affected ecosystems. Hydraulic redistribution, a hydraulic adaptation which moves water through plant roots into dry or saline soil regions along potential gradients, aids plant survival in stressful environments. Recent theory regarding hydraulic redistribution proposes limitations on the process within saline soils. This study applies a minimalist resistor-capacitor model of the soil-plant-atmosphere system to the experimental conditions of a 2010 study investigating hydraulic redistribution in a salt affected area. The effectiveness of the model is evaluated, and a sensitivity analysis is conducted to identify key dynamics affecting the moisture …

Synthesis Of Novel Chiral Phosphorothioic Acid Organocatalysts And Application To Synthetic Methodology, Parsa Azaei

Undergraduate Research Symposium Posters

Much research efforts have been centered towards the synthesis of novel Bronsted acid catalysts. These organocatalyst enable synthesis of natural products, pharmaceuticals, and bioactive small molecules under toxic-metal-free conditions by donating their protons, while not being consumed in the reaction. Chiral phosphorothioic acid have significant potential as novel organocatalysts due to their high modifiability of chirality and acidity under environmentally friendly conditions; however, synthesis of these organocatalysts are far and in between. Therefore, our research aimed to i) synthesize novel phosphorothioic acid organocatalysts and ii) to apply these novel catalysts toward new methodology development.

Exploring The Use Of Piox System For Treatment Of Endocrine Disrupting Compounds, Alexander Pearson

Civil Engineering Theses

In this thesis, the Photon Initiated Oxidation (PIOx) system was investigated for its possible use in the treatment of Endocrine Disrupting Compounds (EDCs). It was theorized that the unique design of the system, namely the multiple wavelengths of UV light and the micronfoam would improve removal rates of the test contaminant when compared to other systems. 17β-estradiol was chosen as the test contaminant due to the compounds known sensitivity to ozone exposure. Two methods of testing were used, the first to test an idealized homogenous concentration (method one) and the second to mimic the sudden influx of contaminant that would …

Wearable Sensors For Plants, Nafize Ishtiaque Hossain

Electrical Engineering Theses

This thesis reports PlantFit: a research and development project that is intended to develop wearable sensors for plants. Plants are responsible for providing food, fiber, fuel, and fodder to the society. To overcome the problem of a limited land base, a more efficient farming approach needs to be developed, and thus precision farming is required. Precision farming would entail personalized healthcare in plants. When the plant is under any stress, the productivity declines. Plants release phytohormones, also known as early responders, in response to these stressors. The key crop phytohormones that respond to environmental stresses include salicylic acid (SA), indole-3-acetic …

Principles For Using Remote Data Collection Devices And Deep Learning In Evaluating Social Impact Indicators Of Engineered Products For Global Development, Bryan J. Stringham

Theses and Dissertations

Evaluating the social impacts of engineered products, or effects products have on the daily lives of individuals, is critical to ensuring that products are having positive impacts while avoiding negative impacts and to learning how to improve product designs for a more positive social impact. One approach to quantifying a product's social impact is to use social impact indicators that combine user data in a meaningful way to give insight into the current social condition of an individual or population. However, determining social impact indicators relative to engineered products and individuals in developing countries can be difficult when there is …

Applying Unsupervised Machine Learning Clustering Techniques To Early Childcare Soundscapes, Kenton Hummel, Erica E. Ryherd, Iason Konstantzos, Abbie Raikes

Durham School of Architectural Engineering and Construction: Faculty Publications

Early childhood is a critical time period for language, brain, cognitive, and social/emotional development. Out-of-home childcare is a normative, typical experience for millions of young children. Although Indoor Environmental Quality (IEQ) in K-12 settings has received recent, significant attention, the links between IEQ and children’s learning and development in early childcare settings is a less understood topic. This work focuses specifically on the sound aspect of IEQ in early childcare settings to better understand typical noise levels and occupant experience. Standard approaches to analyzing background noise will be presented alongside more detailed statistical analyses utilizing unsupervised machine learning clustering techniques. …

Effect On 360 Degree Video Streaming With Caching And Without Caching, Md Milon Uddin

Electrical Engineering Theses

People all around the world are becoming more and more accustomed to watching 360-degree videos, which offer a way to experience virtual reality. While watching videos, it enables users to view video scenes from any perspective. To reduce bandwidth costs and provide the video with less latency, 360-degree video caching at the edge server may be a smart option. A hypothetical 360-degree video streaming system can partition popular video materials into tiles that are cached at the edge server. This study uses the Least Recently Used (LRU) and Least Frequently Used (LFU) algorithms to accomplish video caching and suggest a …

Stable Numerical Methodology For Variational Inequalities With Application In Quantitative Finance And Computational Mechanics, Davood Damircheli

Theses and Dissertations

Coercivity is a characteristic property of the bilinear term in a weak form of a partial differential equation in both infinite space and the corresponding finite space utilized by a numerical scheme. This concept implies \textit{stability} and \textit{well-posedness} of the weak form in both the exact solution and the numerical solution. In fact, the loss of this property especially in finite dimension cases leads to instability of the numerical scheme. This phenomenon occurs in three major families of problems consisting of advection-diffusion equation with dominant advection term, elastic analysis of very thin beams, and associated plasticity and non-associated plasticity problems. …

Developing An Early Life Cycle Manufacturability Assessment For Conceptual Designs, Tonya Gamblin Mccall

Theses and Dissertations

Studies have shown that 70 – 80% of a product's life cycle costs are committed by the end of the product design phase (Anderson, 2014; National Research Council, 1991; Swift, 1987). This supports the general claim that decision making in the conceptual stage drives the cost throughout the life cycle. The use of concurrent engineering has been viewed as the answer to this problem, offering the Design for Excellence (DFX) as one approach for evaluating product designs across specific disciplines. This research focuses on a subset of DFX referred to as Design for Manufacturability to develop a means to assess …

Practical Requirements Elicitation In Modern Product Development: A Multi-Case Study In Discontinuous Innovation, Michael King

Theses and Dissertations

Practical modern product development, specifically rapid, lean efforts to create new disrupting or specialized products, face constraints that require modified requirements elicitation (RE) techniques. Requirements elicitation conventions have not been updated to address the challenges of these approaches, and industry practitioners lack the tools to select the most efficient techniques. This study examines the RE approaches performed by three resource-limited teams conducting discontinuous new product development through a multi-case study to identify gaps between the literature and practice, with suggestions to fill them. Our findings suggest modern RE practices and challenges closely reflect those found by studies on RE in …

Molecular Dynamics Of High Temperature Hydrogen Attack, Mike Travis Bodden Connor

Theses and Dissertations

High temperature hydrogen attack (HTHA) is a damage mechanism that only affects carbon steel and low alloy material. Most of the data regarding HTHA are experimental-driven. Even though this approach has been successful, there are still much more things that the oil and gas industry does not understand about HTHA. The regions that were considered safe (below the Nelson curves) have experienced catastrophic failure. Our research consists of performing Molecular Dynamics (MD) and the Nudge Elastic Band (NEB) calculation of HTHA to better understand the atomistic behavior of this damage mechanism.

Development Of A Crosslinked Osteochondral Xenograft And A Collagen Stabilizing Intra-Articular Injection To Remediate Cartilage Focal Lesions To Prevent Osteoarthritis, Mark Lewis Mosher

Theses and Dissertations

Osteoarthritis is one of the most common causes of disability in adults in America. It is a progressive and degenerative disease where the articular cartilage is broken down and lost from the surfaces of bones causing chronic pain and swelling in the joints, and currently has no cure. The most commonly osteoarthritis starts from a focal lesion on the cartilage surface, which will expand on the surface and downwards through the thickness of the tissue. The current gold standard for correcting cartilage focal lesions is the osteochondral autograft/allograft transplantation (OAT), which replaces the defect with a fresh osteochondral graft. The …

Nuclear Power Plant In Las Vegas, Ryan W. Murray

Undergraduate Research Symposium Posters

This research focuses on the impact of a “Nuclear Power Plant in Las Vegas” or ‘NPP in LV’ for short. Nuclear power is clean, has no greenhouse gas emissions, and has a moderate cost of kilowatt hours. Las Vegas, or more specifically Clark County uses Gas power plants to produce a majority of their electricity. My project will show what a nuclear plant could do if built in the city of Las Vegas. What is a Nuclear power plant? The EIA’s definition is “A nuclear power plant uses the heat that a nuclear reactor produces to turn water into steam, …

Inequity Of Access Across America: A Spatial, Temporal, And Modal Disparity Analysis, Sanju Maharjan

Theses and Dissertations

The overarching goal of this dissertation is to examine the spatial, temporal, and modal disparity of access across America. This is achieved by posing three research objectives. The first objective determines the spatial and temporal disparity of transit and automobile access gap, its impact on transit use, and its socioeconomic and built environment correlates. The second objective examines the spatial and temporal disparity of slightly and extremely risky bike infrastructure and measures the social inequity of access to bike infrastructure. The third objective indicates spatial transit access mismatch between high- and low-wage employment across metropolitans. Three findings are discerned. First, …

Numerical Study Of Advanced Solar Receiver Tubes Based On A Coupled Thermo-Mechanical Analysis For Concentrated Solar Power Tower Plant, Shawn Michael Hatcher

Theses and Dissertations

The search for more sustainable energy to match the growing energy demand begins with finding more dispatchable resources such as solar energy. As one of the promising solar technologies, concentrated solar power (CSP) has a full capacity to store thermal energy for extended operation. Nevertheless, some key components in CSP systems usually face extreme environment, such as uneven solar flux, cyclic thermal expansion, structural degradation on the solar absorber tubes in a Concentrated Solar Power Tower (CSPT) Plant. In this study, we applied Multiphysics simulation to explore the benefits of introducing optimized fins for heat transfer enhancement and uniform temperature …

Evaluation For Using Expended Bioelectrochemical Systems As Soil Amendments For Improved Corn Plant Growth And A Drought Resistant Soil., Jackson Lee Sauers

Theses and Dissertations

A long-held practice is to mix agricultural soil with a soil amendment to improve growing conditions in crops. A common soil amendment is biosolids produced from both municipal and dairy wastewater due to the macro- and micronutrients within it. Both the agricultural and wastewater industries are participating in the Circular Economy concept (CEC). Two experiments explored using expended bioelectrochemical systems (BES) that treated either synthetic dairy wastewater (DWW) or synthetic municipal wastewater (SWW) as soil amendments to improve corn plant growth when treated with three different nutrient treatments: 100%- 50%- and 0% Hoagland Nutrient Solutions. Biochar and used terracotta clay …

Quasi 1d Modelling Of A Scramjet Engine Cycle Using Heiser-Pratt Approach, Asmaa Chakir

Theses and Dissertations

Scramjet engines are key for sustained hypersonic flights. Analytic models play a critical role in the preliminary design of a scramjet engine configuration. The objective of this research is to develop and validate a quasi-1D model for the scramjet engine encompassing inlet, isolator and combustor, to evaluate the impact of flight conditions and design parameters on the engine functionality. The model is developed assuming isentropic flow in the inlet with a single turn; modified Fanno-flow equations in the isolator that account for the area change of the core flow; and the combustor is modeled using Heiser-Pratt equations accounting for the …

Oxidized Fibrin Alginate Microbeads To Treat Vascular Calcification, Brittany Nichole Macha

Theses and Dissertations

Calcification is linked to a high prevalence of cardiovascular events and mortality due to arterial stiffness. Stiffening of the arteries in the case of medial calcification is due to hydroxyapatite mineral deposited in the artery thus leading to the loss of elastin. A possibility of removing this rogue mineral along the vessel walls could be the use of osteoclasts. Osteoclasts, a type of osteocyte, have the unique ability to absorb bone in the bone turnover process. It is proposed that in the future, osteoclasts be delivered to the site of mineralization through oxidized alginate-fibrin microbeads. Alginate hydrogels have proven great …

Assessment Of Simulated And Real-World Autonomy Performance With Small-Scale Unmanned Ground Vehicles, William Peyton Johnson

Theses and Dissertations

Off-road autonomy is a challenging topic that requires robust systems to both understand and navigate complex environments. While on-road autonomy has seen a major expansion in recent years in the consumer space, off-road systems are mostly relegated to niche applications. However, these applications can provide safety and navigation to dangerous areas that are the most suited for autonomy tasks. Traversability analysis is at the core of many of the algorithms employed in these topics. In this thesis, a Clearpath Robotics Jackal vehicle is equipped with a 3D Ouster laser scanner to define and traverse off-road environments. The Mississippi State University …

Human Gait Movement Analysis Using Wearable Solutions And Artificial Intelligence, Samaneh Davarzani

Theses and Dissertations

Gait recognition systems have gained tremendous attention due to its potential applications in healthcare, criminal investigation, sports biomechanics, and so forth. A new solution to gait recognition tasks can be provided by wearable sensors integrated in wearable objects or mobile devices. In this research a sock prototype designed with embedded soft robotic sensors (SRS) is implemented to measure foot ankle kinematic and kinetic data during three experiments designed to track participants’ feet ankle movement. Deep learning and statistical methods have been employed to model SRS data against Motion capture system (MoCap) to determine their ability to provide accurate kinematic and …

Resiliency Of Levee-Protected Power Networks To Flooding In A Changing Climate Integrating Environmental Justice, Seyed Saeed Miraee-Ashtiani

Theses and Dissertations

Electric power system (EPS) is an integral part of infrastructure systems. Ensuring its resiliency to extreme weather events and natural hazards is crucial to protect the safety, economy and public health. Recorded and projected data show an increase in the frequency and severity of extreme weather events and natural hazards attributed to a changing climate. It is critical to ensure the integrity of the aging infrastructure systems and to promote environmental justice by shrinking the energy-equity gap to lower power outages in disadvantaged communities.

An important aspect is the resiliency interdependency of EPS to other critical infrastructure systems, an aspect …

Structure And Dynamics Of Lignin In Condensed Phase For Biomass Conversion, Nusrat Jahan

Theses and Dissertations

Lignocellulosic biomass represents the largest potential volume and lowest cost for biofuel and biochemical production. Harnessing the full potential of the lignocellulosic biomass for low-carbon energy requires the knowledge of efficient breakdown and fractionation of its carbohydrates and lignin. Organic solvent pretreatment is recognized as an emerging way ahead because of its inherent advantages, such as the ability to fractionate lignocellulosic biomass into cellulose, lignin, and hemicellulose components with high purity, as well as easy solvent recovery and solvent reuse. Through all-atom MD simulation, we analyze the conformational transition of diverse lignin molecules in varying concentration of Methanol/water , DMSO/water …

A Constitutive Material Model For Simulating Texture Evolution And Anisotropy Effects In Cold Spray., Creston Michael Giles

Theses and Dissertations

Cold spray has seen rapid advancement since its inception and has shown significant potential as a method of additive manufacturing. However, the large plastic deformation and repeated heating/cooling cycles that the material undergoes during the cold spray process can result in gradients in material structure and large residual stresses. The purpose of this study is to extend the existing EMMI material model to include anisotropic material response through the use of orientation distribution functions to predict residual stresses and anisotropy resulting from cold spray and similar additive manufacturing processes. Through the use of a finite element simulation, yield surfaces for …

Development Of Alternative Air Filtration Materials And Methods Of Analysis, Ivan Philip Beckman

Theses and Dissertations

Clean air is a global health concern. Each year more than seven million people across the globe perish from breathing poor quality air. Development of high efficiency particulate air (HEPA) filters demonstrate an effort to mitigate dangerous aerosol hazards at the point of production. The nuclear power industry installs HEPA filters as a final line of containment of hazardous particles. Advancement air filtration technology is paramount to achieving global clean air. An exploration of analytical, experimental, computational, and machine learning models is presented in this dissertation to advance the science of air filtration technology. This dissertation studies, develops, and analyzes …

Comparing Importance Of Knowledge And Professional Skill Areas For Engineering Programming Utilizing A Two Group Delphi Survey, John F. Hutton

Theses and Dissertations

All engineering careers require some level of programming proficiency. However, beginning programming classes are challenging for many students. Difficulties have been well-documented and contribute to high drop-out rates which prevent students from pursuing engineering. While many approaches have been tried to improve the performance of students and reduce the dropout rate, continued work is needed. This research seeks to re-examine what items are critical for programming education and how those might inform what is taught in introductory programming classes (CS1). Following trends coming from accreditation and academic boards on the importance of professional skills, we desire to rank knowledge and …

Surrogate Model-Based Design Optimization Of A Mobile Deployable Structure For Overpressure Load And Vehicular Impact Mitigation, Daniela F. Tellkamp

Theses and Dissertations

Artificial Neural Network (ANN) ensemble and Response Surface Method (RSM) surrogate models were generated from Finite Element (FE) simulations to predict the overpressure load and vehicle impact response of a novel rapidly deployable protective structure. A Non-dominated Sorting Genetic Algorithm-II (NSGA-II) was used in conjunction with the surrogate models to determine structure topology input variable configurations which were suited to produce the optimal balance of minimum mass, minimum rotation angle, minimum displacement, and maximum total length of the deployable structure. The structure was designed to retract into a container, be lightweight to facilitate transportation, and be able to adapt to …

Additively Manufactured Lenses For Modulating Guided Waves In Laminated Composites, Hajar Righi

Theses and Dissertations

Composite materials have increasingly been used as an alternative to metals and other isotropic materials for primary structural components in aerospace industries. Unlike traditional isotropic materials, composite materials are known to have complex internal microstructures. Therefore, it is essential to develop methods for the inspection, evaluation, and monitoring of composite materials. Ultrasonic-guided waves and, more precisely, Lamb waves have proven to be an efficient and accurate technique for the non-destructive testing. Since guided waves are dispersive and multimodal, it is important to develop a practical method to manipulate Lamb waves to achieve better structural health monitoring and non-destructive inspection results. …

Recruiting More U.S. Women Into Engineering Based On Stories From Morocco: A Qualitative Study, Soundouss Sassi

Theses and Dissertations

The objective of this project is to examine the differences between Moroccan and American students with regards to the cultural influences that led them to pursue an engineering degree. Annually since 2015, a partnership between a university in Morocco and MSU allows senior engineering Moroccan students to study at MSU to obtain their graduate degree in aerospace or mechanical engineering. The roughly equal gender representation in most Moroccan cohorts prompted our research question: “How do students from Morocco and the United States describe the cultural reasons that factored into their choice to pursue an engineering degree?” This exploratory qualitative study …

Congestion Based Truck Drone Intermodal Delivery Optimization, Ankith Thodupunoori

Theses and Dissertations

Commerce companies have experienced a rise in the number of parcels that need to be delivered each day. The goal of this study is to provide a decision-making procedure to assist carriers in taking a more significant role in selecting cost and risk-efficient truck-drone intermodal delivery routing plan. The congestion-based model is developed to select the method of parcel delivery utilizing a truck and a drone for optimizing cost and time. A study also has been conducted to compare drone-only and truck-only delivery routing plan. The proposed A* Heuristic algorithm and the OSRM application generate the travel path for drone …

Towards Structured Planning And Learning At The State Fisheries Agency Scale, Caleb A. Aldridge

Theses and Dissertations

Inland recreational fisheries has grown philosophically and scientifically to consider economic and sociopolitical aspects (non-biological) in addition to the biological. However, integrating biological and non-biological aspects of inland fisheries has been challenging. Thus, an opportunity exists to develop approaches and tools which operationalize planning and decision-making processes which include biological and non-biological aspects of a fishery. This dissertation expands the idea that a core set of goals and objectives is shared among and within inland fisheries agencies; that many routine operations of inland fisheries managers can be regimented or standardized; and the novel concept that current information and operations can …