Engineering Commons^™

Microstructural Characterization Of Ternary Eutectic And Near-Eutectic Al-Cu-Mg Alloys, Dominic Ikemefuna Ezemenaka

All ETDs from UAB

As solidification science continues to evolve, better understanding of microstructure evolution opens up a vast range of opportunities for metallic alloys research and development. Traditionally, there is a strong link between materials processing and structure, which in turn influences their properties and performance in service areas. With the present rapid advancement in technology, materials scientists/researchers are faced with the challenge of understanding higher-order eutectic alloys due to their unique properties. In this research work, invariant and off-eutectic Al-Cu-Mg alloys are chosen as models because they have not received considerable research attention in comparison with other ternary eutectic alloys. The experimental …

Fiber Prestressing In Glass Fiber Reinforced Polymer (Gfrp) Composites, Mahmoud Mohamed

All ETDs from UAB

Fiber Reinforced Polymer (FRP) composite have found increasing use in several vital industries and applications, such as transportation, construction, sporting goods, and aircraft. The quality and mechanical properties of FRP composites are significantly influenced by many factors including the manufacturing technique. Introducing the technique of fiber prestressing during the manufacturing process of FRP composites can effectively improve their performance without a considerable additional cost. This study contributes to further investigation and understanding about utilizing the elastic method of fiber prestressing to produce Glass Fiber Reinforced Polymer (GFRP) composites, in the following ways:First, a novel and effective method to manufacture unidirectional …

Modification Of N95 Respirators: Allaying Deficits In Respiratory Protection Below 300 Nanometers, Adam Nored

All ETDs from UAB

The current growth rate of nanomaterials being used in everyday materials as well as in construction materials is quite large. While this in itself could be quite promising, there is a lack of information known about the risks that materials in the nano size range may have attached to their use. Until a full-scale risk analysis of the nanomaterials is used in the construction industry there is a need for personal protection to be implemented. A known issue with the current PPE exists, in that the N95 personal respirator has some particle collection efficiency issues below 300 nm. Modifications to …

Identifying Alternate Resources And Adjusting Expectations For Senior Design Projects During The Covid-19 Pandemic Of 2020, Jay R. Goldberg

Biomedical Engineering Faculty Research and Publications

In March 2020, the COVID-19 pandemic required capstone design course instructors to transition to online learning. Student project teams were denied access to resources needed to construct and test prototypes scheduled to be delivered to project sponsors and clients at the end of the semester. Face-to-face collaboration was replaced with virtual team meetings. At Marquette University, efforts to identify (1) barriers to completing projects, (2) potential alternate prototyping resources, (3) adjustments to expectations of teams, and (4) changes to course deliverable requirements were completed. The results of these activities, the thought process used to guide students through the search for …

Effect Of Feedrate, Depth Of Cut, Tool Material, And Toolpath On Dimensional Accuracy And Surface Roughness Of Milled Cfrp, Assem Hesham Almadani

Graduate Theses, Dissertations, and Problem Reports (ETD)

This thesis investigates the effect of different factors on Carbon Fiber Reinforced Polymers (CFRP) milling, like feedrate, tool material, and cutting speed. CFRP offers excellent material properties, which led to the increase of the material in today's manufacturing industry. CFRP offers up to 2.25 times steel's modulus of elasticity at about a fifth of the weight and excellent thermal properties, which allow the use of this material in applications with high heat like automobiles. Many industries have implemented the use of CFRP in their applications, like airplanes and automobiles, which lead to a decrease in weight and increase in strength. …

The Effect Of Natural Fractures On The Mechanical Behavior Of Limestone Pillars: A Synthetic Rock Mass Approach Application, Mustafa Can Süner

Graduate Theses, Dissertations, and Problem Reports (ETD)

In general, underground limestone mines have inherently strong rock and experience good ground stability. Also, modern pillar design guidelines developed by National Institute for Occupational Safety and Health (NIOSH) have improved the design of stable layouts for modern limestone mines. However, ground control-related incidents are still an important problem. In underground limestone mines, previously mined sections stay open for the life of the mine which may be many years, and it is possible for travel ways to working faces to pass through these old sections. In a recent massive pillar collapse in an old section of a mine in Pennsylvania …

An Equest Based Building Energy Modeling Analysis For Energy Efficiency Of Buildings, Saroj Lamichhane

Graduate Theses, Dissertations, and Problem Reports (ETD)

Building energy performance is a function of numerous building parameters. In this study, sensitivity analysis on twenty parameters is performed to determine the top three parameters which have the most significant impact on the energy performance of buildings. Actual data from two fully operational commercial buildings were collected and used to develop a building energy model in eQUEST. The model is calibrated using Normalized Mean Bias Error (NMBE) and Coefficient of Variation of Root Mean Square Error (CV(RMSE)) method. The model satisfies the NMBE and CV(RMSE) criteria set by the American Society of Heating, Refrigeration, and Air-Conditioning (ASHRAE) Guideline 14, …

Prediction Of Tensile Behaviors Of L-Ded 316 Stainless Steel Parts Using Machine Learning, Israt Zarin Era

Graduate Theses, Dissertations, and Problem Reports (ETD)

Directed energy deposition (DED) is a rising field in the arena of metal additive manufacturing and has extensive applications in aerospace, medical and rapid prototyping. The process parameters, such as laser power, scanning speed and specimen height, play a great deal in controlling and affecting the properties of DED fabricated parts. Nevertheless, both experimental and simulation methods have shown constraints and limited ability to generate accurate and efficient computational predictions on the correlations between the process parameters and the final part quality. In this work, a data driven machine learning model XGBoost has been built and applied to predict the …

Determination Of Effectiveness Of Energy Management System In Buildings, Vivash Karki

Graduate Theses, Dissertations, and Problem Reports (ETD)

Building Energy Management Systems (BEMS) are computer-based systems that aid in managing, controlling, and monitoring the building technical services and energy consumption by equipment used in the building. The effectiveness of BEMS is dependent upon numerous factors, among which the operational characteristics of the building and the BEMS control parameters also play an essential role. This research develops a user-driven simulation tool where users can input the building parameters and BEMS controls to determine the effectiveness of their BEMS. The simulation tool gives the user the flexibility to understand the potential energy savings by employing specific BEMS control and help …

Analysis On Combined Heat And Power, And Combined Heat And Power Hybrid Systems For Unconventional Drilling Operations, Diego G. Dranuta Ferrer

Graduate Theses, Dissertations, and Problem Reports (ETD)

The United States (U.S.) has experienced a natural gas “boom” due to the development of unconventional shale plays, but well development is energy intensive. Operations use electric drilling rigs typically powered by either three high-horsepower diesel engines (HHPDE) or three dedicated natural gas engines (DNGE) and associated generators. From a first law analysis, HHPDEs peak at 42% efficiency at full load, while DNGE peak at about 30%. Most of the fuel energy is lost as heat rejected by the exhaust and radiators. Concurrently, during cold seasons rigs utilize boilers to provide steam throughout the rig to prevent freezing and provide …

Metal Supported Solid Oxide Fuel Cell Using Proton Conducting Electrolyte For Direct Ammonia Utilization, Edwin Vega Hiraldo

Graduate Theses, Dissertations, and Problem Reports (ETD)

Transportation represents about 27% of global warming greenhouse gas emissions nowadays. To reduce these emissions, fuel cell electric vehicles have been poised to be a new trend to provide zero-emission transportation. Among them, solid oxide fuel cells (SOFCs) offer efficient, clean energy, especially when powered by carbon-free fuel, such as ammonia. To enable onboard ammonia-fed SOFCs, a metal-supported, proton-conducting SOFC is investigated in this study. The metal support would provide physical robustness for thermal shock during vehicles’ quick start-up and shutdown, reduce internal temperature gradients due to the greater thermal conductivity of the metal, and enable conventional metal joining for …

Recovery Of Phosphorus From Florida Phosphatic Waste Clay, Amir Eskanlou

Graduate Theses, Dissertations, and Problem Reports (ETD)

This MS thesis examines the recovery of phosphorus (P) from Florida waste clay (WC). A comprehensive literature review revealed that: (i)-The most important values being lost to WC are P and rare earth elements (REEs). For the recovery of these values from WC, two crucial attempts are the removal of extremely fine-sized clays, followed by the recovery of phosphate content, which can pave the path for the recovery of REEs; (ii)-Any scientific/ technological solution should, at the same time, be economically and environmentally attractive to the industry. As such, moving from mostly chemical separation processes to the primarily physical/ physicochemical …

Next-Generation Re-Entry Aerothermodynamic Modeling Of Space Debris Using Machine Learning, Nicholas Sia

Graduate Theses, Dissertations, and Problem Reports (ETD)

The number of resident space objects re-entering the atmosphere is expected to rise with increased space activity over recent years and future projections. Predicting the survival and impact location of the medium to large sized re-entering objects becomes important as they can cause on ground casualties and damage to property. Uncertainties associated with the re-entry process makes necessary a probabilistic approach, which can be computationally expensive when using high-fidelity numerical methods for estimating aerothermodynamic properties. To date, object-oriented analysis is the dominant tool used for atmospheric re-entry modeling and simulation, where aerothermodynamic coefficients are used to determine the risk a …

Transform Based Approaches For The Detection Of Astrophysical Signals, Marwan Mahfud Alkhweldi

Graduate Theses, Dissertations, and Problem Reports (ETD)

Development of new algorithms for the detection of isolated astrophysical pulses is of interest to radio astronomers. Both Fast Radio Bursts (FRBs) and several Rotating Radio Transients (RRATs) were detected through the application of a single pulse search algorithm. The conventional approach to detect astronomical pulses requires an exhaustive search for the correct dispersion measure. Its accelerated versions involve signal processing in Fourier transform space.

In this dissertation, we present several new transform-based approaches for the detection and analysis of astrophysical signals with the latest being the most effective and advanced of all. It is implemented in several steps. First, …

On The Improvement Of The Indirect Quantification Of Methane Emissions: A Stationary Single Sensor Approach, Robert Scott Heltzel

Graduate Theses, Dissertations, and Problem Reports (ETD)

There is a need for improved indirect quantification of methane emissions, particularly from the natural gas industry. Natural gas production continues to increase along with the number of wells and production sites. These production sites have the potential to contribute significant levels of methane emissions. Methane is a potent greenhouse gas and the primary component of natural gas. A more complete understanding of emissions through improved quantification will lead to enhanced mitigation. Emissions have historically been quantified with both direct and indirect methods, with varying results. Emissions have been shown to be both temporally and spatially variable. These facts have …

Improving Real-Time Methane Monitoring In Longwall Coal Mines Through System Response Characterization Of A Multi-Nodal Methane Detection Network, Brian Philip Cappellini

Graduate Theses, Dissertations, and Problem Reports (ETD)

Machine automation and atmospheric monitoring are used by many industries to improve safety and productivity in the workplace. The underground Methane Watchdog System (MWS) is a multi-nodal network of sensors currently under development. The MWS aims to improve safety and productivity by introducing 10 compact sampling units designed to be easily integrated within the current roof support equipment of the mine. Each unit contains an array of sensors used to continuously monitor the environmental conditions which include methane concentration, temperature, pressure, and relative humidity. All MWS units report information back to a remote central processing hub (CPH) which collects nodal …

The Impacts Of The Net Stress And Stress Shadow On The Productivity Of Marcellus Shale Horizontal Well, Mohamed El Sgher

Graduate Theses, Dissertations, and Problem Reports (ETD)

Shale gas development has become a crucial part of the global oil and gas industry in recent years, especially in North America. Even though the application of horizontal drilling and hydraulic fracturing techniques have successfully unlocked considerable reserves of natural gas in shale-gas reservoirs, production rates from unconventional reservoirs decline more rapidly than conventional reservoirs. This is because production from a reservoir results in an increase in net stress due to a reduction in the pore pressure, while overburden pressure remains constant. This leads to the reduction in permeability of both the matrix and the fissures, as well as the …

Biological Conversion Of Carbon Dioxide To Value-Added Chemicals, Owen James Mcgrath

Graduate Theses, Dissertations, and Problem Reports (ETD)

As Carbon Dioxide (CO₂) levels in the atmosphere continue to rise due to human intervention, there is increased urgency to take actions to mitigate the potential ramifications. Many countries have instituted a CO₂ tax and have provided funding to finding potential solutions to our growing CO₂ problem. Further investigating CO₂ capture, sequestration, and utilization is key to combating rising CO₂ levels and methods being investigated have increased substantially in recent years. Converting CO₂ into fuels and value-added chemicals provides a unique opportunity to create materials of value from a substance that is being …

Application Of Artificial Intelligence In Three Phase Unbalanced Smart Power Distribution Grid, Deepak Tiwari

Graduate Theses, Dissertations, and Problem Reports (ETD)

Electrification of the transportation sector can play an essential role in curbing fossil fuel scarcity and oil shortages in the world. Electric vehicles (EVs) can significantly reduce CO2 emissions, improve urban pollution. Apart from these advantages of EVs, they may also pose challenges to the distribution grid. Increasing penetration of EVs puts an extra burden and leads to affect the grid severely. Load congestions, voltage drops/regulation, overloading are some of the issues that might incur in the grid because of improper charging of EVs. The uncertain nature of EV owners makes it very difficult to predict the charging pattern. So …

Designs And Practical Control Methods For Soft Parallel Robots, Benjamin T. Buzzo

Graduate Theses, Dissertations, and Problem Reports (ETD)

The use of soft robotics is becoming an increasingly researched topic, since they can provide more flexibility in movements and increase safety when working with humans. However, they are more susceptible to modeling and manufacturing errors in the design.

The objective of this thesis is two-fold, the first objective is to determine the benefits and limitations of using calibration tables that rely on the PWM signals instead of modeling as a control method. If calibration tables are not adequate to achieve a high level of precision. The second objective is to determine if using a tethered mobile robot in unison …

Touching Light: A Framework For The Facilitation Of Music-Making In Mixed Reality, Ian Thomas Riley

Graduate Theses, Dissertations, and Problem Reports (ETD)

Drawing upon the historical development of analog and digital technologies alongside the proliferation of computer-assisted performance practices, this research seeks to develop a framework for integrating Mixed Reality applications to live musical performance, specifically through the creation of a Microsoft HoloLens 2 Mixed Reality application in order to facilitate a live performance of an original musical composition for percussion and real-time Mixed Reality environment. Mixed Reality enables a performer to interact with virtual (holograms, VSTs, etc.) and physical (vibraphone, tuned drums, microphones, etc.) objects simultaneously. Tandem to the development of the conceptual framework was the composition of an original score …

Increasing The Seebeck Coefficient Of Thermoelectric Calcium Cobaltite Ceramics Through Incorporation Of Rare-Earth Elements, Andre Fabian Fernandes

Graduate Theses, Dissertations, and Problem Reports (ETD)

The demand for alternative sources of energy continues to grow, so it is essential to look for alternatives that are environmentally sustainable to minimize the environmental impact of energy generation. Projections suggest that renewables have the potential to make up over fifty percent of power generation by 2035. Studies have shown that in 2020 more than 62% of the energy produced in the US was lost, with most of this energy being in the form of waste heat. Waste heat can be utilized to improve the efficiency of power production or even power other devices. This waste heat can be …

Biomechanically Inspired Assistive Technology To Restore Movement Of The Upper Limbs After Stroke, Ariel Thomas

Graduate Theses, Dissertations, and Problem Reports (ETD)

A stroke often damages the neural structures responsible for movement. Stroke is a heterogeneous disease, affecting each survivor differently. There are common motor features of a stroke, but even these features vary across time as an individual proceeds through different stages of recovery. The different ways in which stroke motor impairment can present itself are often overlooked, but these differences are fundamental to the understanding of the disease and its recovery. When motor assessments are capable of acquiring information necessary to parse out a detailed profile of each stroke case, this will lead to an improved neuromechanical understanding of the …

Optimization Of Gelatin-Based Cellular Coating Of Msc For Myocardial Infarction Therapy, Kara Amelle Davis

Theses and Dissertations--Chemical and Materials Engineering

Cardiovascular disease remains the number one threat to American lives. During an acute myocardial infarction (AMI), blood flow is blocked and results in the formation of scar tissue. As the body’s immune system responds, inflammatory signaling causes an increase in both scar tissue size and the patient’s risk for further chronic heart failure. In order to reduce the risk of continued heart disease inflammatory signaling must be reduced. Stem cell therapies have the ability to alter the immune system’s pro-inflammatory signal. However, stem cell retention is limited due to blood flow shear. Gelatin methacrylate (GelMA) based coatings have been shown …

Fabrication Of Nanoporous Materials For Applications Under Extreme Environments, Maria Kosmidou

Theses and Dissertations--Chemical and Materials Engineering

The study of nanoporous materials has become a key aspect of nanotechnology due to their high surface-area-to-volume ratio, arising from the small size ligaments and pores that form the structure. Sensing, catalysis, micro-electromechanical systems (MEMS), medical applications, and materials for radiation environments are some of the applications for which nanoporous materials are considered great candidates. This work, performed at the Ion Beam Laboratory (IBL) at Sandia National Laboratories (SNL), examines the effect of heavy and light ion irradiation exposure on nanoporous Au. Radiation damage accumulation is observed with real-time recording of the creation, migration, and removal of the radiation-induced defects …

Assessment Of A Decentralized Solution For Waste Plastic Management In Developing Regions, Chandniben Ashishkumar Joshi

Theses and Dissertations--Chemical and Materials Engineering

Rapid population growth, urbanization and availability of pre-packaged consumer goods have led to increased generation and consumption of plastic – so much so that it has become ubiquitous in the environment. An affordable, durable, and lightweight material of construction, plastic is used in innumerable products in every country on earth. However, this explosion of consumption coupled with the material’s significantly low degradability have led to serious plastic accumulation challenges, which are now an imminent threat to terrestrial and marine species globally. These challenges are especially acute in developing countries, where capital and infrastructure constraints, poor governmental regulation and lack of …

Electrochemical Performance Of Biomass-Derived Activated Carbon Supercapacitor Under Compression, Yulin Zhang

Theses and Dissertations--Chemical and Materials Engineering

Supercapacitors are important energy storage device of high-power density, fast charge/discharge rate, environmental friendliness and long service life. Currently, flexible supercapacitors have attracted widespread interest in academia and industry. Supercapacitors under the action of external force will inevitably cause structural changes, performance degradation and even loss of energy storage and supply functionalities. As the most abundant renewable resource so far, biomass is an important energy source for human survival and development. Most electrode materials for supercapacitors are porous activated carbons, which can be derived from abundant renewable biomass, contributing to the sustainable development of society and environmental protection. This thesis …

Interactions Of Lignin Dimers With Engineered Surfaces And Model Cell Membranes For Design Of Lignin-Based Materials, Mahsa Moradipour

Theses and Dissertations--Chemical and Materials Engineering

Capitalizing on byproducts of industrial and agricultural economies is among the utmost goals of sustainability. Of particular interest for commercial upgrading is lignin, a phenolic biopolymer found in the cell walls of plants which is the second most abundant biopolymer on Earth after cellulose. Due to its heterogeneous structure, deconstructing lignin to selected small molecules for use as chemicals or advanced materials has been elusive. This work capitalizes on a “bottom up” approach to the synthesis of lignin oligomers of known bond chemistry to better understand their interfacial interactions.

The potential pharmacological mechanism of lignin deconstruction components and their toxicological …

The Development Of Structural Hollow Carbon Fibers From A Multifilament Segmented Arc Spinneret: Precursors, Oxidation, And Carbonization, Elizabeth Ashley Morris

Theses and Dissertations--Chemical and Materials Engineering

Carbon fiber is an ideal material for structural applications requiring high strength and stiffness and low weight. Yet it has seen only incremental improvements in properties over the last few decades. Carbon fibers remain limited in attaining their theoretical tensile strength and modulus, largely due to defects in their structure, some of which stem from the fiber production process itself. Through the mitigation of defect formation as well as approaches to decrease fiber linear density, it is hypothesized that carbon fiber with enhanced specific properties, including specific strength and modulus, could be produced which would significantly propel its unique capabilities. …

Development Of A Real Time Human Face Recognition Software System, Askar Boranbayev, Seilkhan Boranbayev, Mukhamedzhan Amirtaev, Malik Baimukhamedov, Askar Nurbekov

Physics & Astronomy Faculty Publications

In this study, a system for real-time face recognition was built using the Open Face tools of the Open CV library. The article describes the methodology for creating the system and the results of its testing. The Open CV library has various modules that perform many tasks. In this paper, Open CV modules were used for face recognition in images and face identification in real time. In addition, the HOG method was used to detect a person by the front of his face. After performing the HOG method, 128 face measurements were obtained using the image encoding method. A convolutional …